home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OpenStep 4.2
/
Openstep-4.2-Intel-User.iso
/
NextLibrary
/
PrinterTypes
/
English.lproj
/
Autologic_APS-6%108h_or_APS-6%108ch_v52.3.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1997-03-29
|
25KB
|
628 lines
*PPD-Adobe: "4.1"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1993 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.1"
*FileVersion: "1.3"
*LanguageVersion: English
*PCFileName: "AU08ch71.PPD"
*Product: "(APS-PS PIP)"
*PSVersion: "(52.3) 920803"
*ModelName: "Autologic APS-6/108h or APS-6/108ch v52.3"
*ShortNickName: "Autologic APS-6/108h or 6/108ch"
*NickName: "Autologic APS-6/108h or APS-6/108ch v52.3"
*% ==== Device Capabilities ===============
*LanguageLevel: "1"
*Extensions: CMYK FileSystem
*FreeVM: "2374160"
*VMOption None/Standard: "2374160"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: True
*FileSystem: True
*?FileSystem: "
save
statusdict /diskonline get exec {(True)}{(False)} ifelse = flush
restore
"
*End
*Throughput: "8"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*%========= Resolution Information =============
*DefaultResolution: 1446x1446dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs dup print (x) print print (dpi) = flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "90.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 0.75 le {dup mul exch dup mul add 1 exch sub }{
2 copy add 1.23 le {0.85 mul add 1 exch sub }{1 sub dup mul exch 1 sub
dup mul add 1 sub }ifelse }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*AccurateScreenSupport: True
*DefaultTransfer: Normalized
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*Transfer Normalized: "{
mark
1.0 1.0 .72 .52 .36 .25 .17 .12 .08 .05 .01 0
counttomark dup 3 add -1 roll exch
2 sub mul dup floor cvi
dup 3 1 roll sub
exch dup
3 add index exch 2 add index dup
4 1 roll
sub mul add
counttomark 1 add 1 roll
cleartomark }"
*End
*Transfer Normalized.Inverse: "{1 exch sub }"
*% Paper Handling ===================
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "letter"
*PageSize Letter.Transverse: "Letter"
*PageSize Legal: "legal"
*PageSize Legal.Transverse: "1008 612 0 0 statusdict /setpageparams get exec"
*PageSize Ledger: "1224 792 0 1 statusdict /setpageparams get exec"
*PageSize Tabloid: "11x17"
*PageSize Tabloid.Transverse: "1224 792 0 0 statusdict /setpageparams get exec"
*PageSize A3: "a3"
*PageSize A4: "a4"
*PageSize A5: "a5"
*PageSize B4: "b4"
*PageSize B5: "b5"
*PageSize A3.Transverse: "A3"
*PageSize A4.Transverse: "A4"
*PageSize A5.Transverse: "A5"
*PageSize B4.Transverse: "B4"
*PageSize B5.Transverse: "B5"
*PageSize LetterExtra: "684 864 0 1 statusdict /setpageparams get exec"
*PageSize LetterExtraTrans: "864 684 0 0 statusdict /setpageparams get exec"
*PageSize LegalExtra: "684 1080 0 1 statusdict /setpageparams get exec"
*PageSize LegalExtraTrans: "1080 684 0 0 statusdict /setpageparams get exec"
*PageSize TabloidExtra: "864 1296 0 1 statusdict /setpageparams get exec"
*PageSize TabloidExtraTrans: "1296 864 0 0 statusdict /setpageparams get exec"
*PageSize LedgerExtra: "1296 864 0 1 statusdict /setpageparams get exec"
*PageSize A3Extra: "1262 914 0 0 statusdict /setpageparams get exec"
*PageSize A3ExtraTrans: "1262 914 0 0 statusdict /setpageparams get exec"
*PageSize A4Extra: "667 914 0 1 statusdict /setpageparams get exec"
*PageSize A4ExtraTrans: "914 667 0 0 statusdict /setpageparams get exec"
*PageSize A5Extra: "492 667 0 1 statusdict /setpageparams get exec"
*PageSize A5ExtraTrans: "667 492 0 0 statusdict /setpageparams get exec"
*PageSize B4Extra: "801 1104 0 1 statusdict /setpageparams get exec"
*PageSize B4ExtraTrans: "1104 801 0 0 statusdict /setpageparams get exec"
*PageSize B5Extra: "588 801 0 1 statusdict /setpageparams get exec"
*PageSize B5ExtraTrans: "801 588 0 0 statusdict /setpageparams get exec"
*PageSize Note: "Letter"
*PageSize Statement: "396 612 0 1 statusdict /setpageparams get exec"
*PageSize 10x14: "720 1008 0 1 statusdict /setpageparams get exec"
*PageSize Folio: "612 936 0 1 statusdict /setpageparams get exec"
*PageSize 11x17: "792 1224 0 1 statusdict /setpageparams get exec"
*PageSize Broadsheet: "1296 1584 0 1 statusdict /setpageparams get exec"
*PageSize Newspage: "960 1638 0 1 statusdict /setpageparams get exec"
*PageSize 12x18: "864 1296 0 1 statusdict /setpageparams get exec"
*PageSize 18x24: "1296 1728 0 1 statusdict /setpageparams get exec"
*PageSize MaxPG: "1296 3240 0 1 statusdict /setpageparams get exec"
*?PageSize: "
save
[(Letter) (Letter.Transverse) (Legal) (Legal.Transverse) (Ledger)
(Tabloid) (Tabloid.Transverse) (A3) (A4) (A5) (B4) (B5) (A3.Transverse)
(A4.Transverse) (A5.Transverse) (B4.Transverse) (B5.Transverse)
(LetterExtra) (LetterExtraTrans) (LegalExtra) (LegalExtraTrans)
(TabloidExtra) (TabloidExtraTrans) (LedgerExtra) (A3Extra) (A3ExtraTrans)
(A4Extra) (A4ExtraTrans) (A5Extra) (A5ExtraTrans) (B4Extra) (B4ExtraTrans)
(B5Extra) (B5ExtraTrans) (Note) (Statement) (10x14) (Folio) (11x17)
(Broadsheet) (Newspage) (12x18) (18x24) (MaxPG)
]
statusdict /pagetype get exec
{get} stopped { pop pop (Unknown)} if = flush
restore
"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion Letter.Transverse: "Letter"
*PageRegion Legal: "legal"
*PageRegion Legal.Transverse: "Legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17 "
*PageRegion Tabloid.Transverse: "Tabloid"
*PageRegion A3: "a3"
*PageRegion A4: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5"
*PageRegion A3.Transverse: "A3"
*PageRegion A4.Transverse: "A4"
*PageRegion A5.Transverse: "A5"
*PageRegion B4.Transverse: "B4"
*PageRegion B5.Transverse: "B5"
*PageRegion LetterExtra: "9.5x12"
*PageRegion LetterExtraTrans: "9.5x12"
*PageRegion LegalExtra: "9.5x15"
*PageRegion LegalExtraTrans: "9.5x15"
*PageRegion TabloidExtra: "12x18"
*PageRegion TabloidExtraTrans: "12x18"
*PageRegion LedgerExtra: "18x12"
*PageRegion A3Extra: "12.69x17.52"
*PageRegion A3ExtraTrans: "12.69x17.52"
*PageRegion A4Extra: " 9.26x12.69"
*PageRegion A4ExtraTrans: " 9.26x12.69"
*PageRegion A5Extra: " 6.83x9.26"
*PageRegion A5ExtraTrans: " 6.83x9.26"
*PageRegion B4Extra: "11.13x15.3"
*PageRegion B4ExtraTrans: "11.13x15.3"
*PageRegion B5Extra: " 8.16x11.125"
*PageRegion B5ExtraTrans: " 8.16x11.125"
*PageRegion Statement: "5.5x8.5"
*PageRegion Note: "Letter"
*PageRegion 10x14: "10x14"
*PageRegion Folio: "8.5x13"
*PageRegion 11x17: "11x17"
*PageRegion Broadsheet: "18x22"
*PageRegion Newspage: "13.33x22.75"
*PageRegion 12x18: "12x18"
*PageRegion 18x24: "18x24"
*PageRegion MaxPG: "18x45"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "0 1 612 792 "
*ImageableArea Letter.Transverse: "0 0 612 792"
*ImageableArea Legal: "0 1 612 1008 "
*ImageableArea Legal.Transverse: "0 0 612 1008 "
*ImageableArea Ledger: "0 1 1224 792 "
*ImageableArea Tabloid: "0 1 792 1224 "
*ImageableArea Tabloid.Transverse: "0 0 792 1224 "
*ImageableArea A3: "0 1 841.89 1190.55 "
*ImageableArea A4: "0 1 595.28 841.89 "
*ImageableArea A5: "0 1 420.95 595.28 "
*ImageableArea B4: "0 1 729 1032 "
*ImageableArea B5: "0 1 498.90 708.66 "
*ImageableArea A3.Transverse: "0 0 841.89 1190.55 "
*ImageableArea A4.Transverse: "0 0 595.28 841.89"
*ImageableArea A5.Transverse: "0 0 420.95 595.28"
*ImageableArea B4.Transverse: "0 0 729 1032"
*ImageableArea B5.Transverse: "0 0 498.90 708.66"
*ImageableArea LetterExtra: "0 1 684 864 "
*ImageableArea LetterExtraTrans: "0 0 684 864 "
*ImageableArea LegalExtra: "0 1 684 1080 "
*ImageableArea LegalExtraTrans: "0 0 684 1080 "
*ImageableArea TabloidExtra: "0 1 864 1296 "
*ImageableArea TabloidExtraTrans: "0 0 864 1296 "
*ImageableArea LedgerExtra: "0 1 1296 864 "
*ImageableArea A3Extra: " 0 1 914 1262 "
*ImageableArea A3ExtraTrans: " 0 0 914 1262 "
*ImageableArea A4Extra: " 0 1 667 914 "
*ImageableArea A4ExtraTrans: " 0 0 667 914 "
*ImageableArea A5Extra: " 0 1 492 667 "
*ImageableArea A5ExtraTrans: " 0 0 492 667 "
*ImageableArea B4Extra: " 0 1 801 1104 "
*ImageableArea B4ExtraTrans: " 0 0 801 1104 "
*ImageableArea B5Extra: " 0 1 588 801 "
*ImageableArea B5ExtraTrans: " 0 0 588 801 "
*ImageableArea Statement: "0 1 396 612 "
*ImageableArea Note: "0 1 612 792"
*ImageableArea 10x14: "0 1 720 1008 "
*ImageableArea Folio: "0 1 612 936"
*ImageableArea 11x17: "0 1 792 1224"
*ImageableArea Broadsheet: "0 1 1296 1584"
*ImageableArea Newspage: "0 1 960 1638"
*ImageableArea 12x18: "0 1 864 1296"
*ImageableArea 18x24: "0 1 1296 1728"
*ImageableArea MaxPG: "0 1 1296 3240"
*?ImageableArea: "
save /cvp { cvi ( ) cvs print ( ) print } bind def
newpath clippath pathbbox
4 -2 roll exch 2 {ceiling cvp} repeat
exch 2 {floor cvp} repeat flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792 "
*PaperDimension Legal: "612 1008"
*PaperDimension Legal.Transverse: "612 1008 "
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension Tabloid.Transverse: "792 1224 "
*PaperDimension A3: "841.89 1190.55"
*PaperDimension A4: " 595.28 841.89 "
*PaperDimension A5: " 420.95 595.28 "
*PaperDimension B4: " 729 1032 "
*PaperDimension B5: " 498.90 708.66 "
*PaperDimension A3.Transverse: "841.89 1190.55 "
*PaperDimension A4.Transverse: "595.28 841.89 "
*PaperDimension A5.Transverse: "420.95 595.28 "
*PaperDimension B4.Transverse: "729 1032 "
*PaperDimension B5.Transverse: "498.90 708.66 "
*PaperDimension LetterExtra: " 684 864 "
*PaperDimension LetterExtraTrans: " 684 864 "
*PaperDimension LegalExtra: " 684 1080 "
*PaperDimension LegalExtraTrans: " 684 1080 "
*PaperDimension TabloidExtra: " 864 1296 "
*PaperDimension TabloidExtraTrans: " 864 1296 "
*PaperDimension LedgerExtra: " 1296 864 "
*PaperDimension A3Extra: " 914 1262 "
*PaperDimension A3ExtraTrans: " 914 1262 "
*PaperDimension A4Extra: " 667 914 "
*PaperDimension A4ExtraTrans: " 667 914 "
*PaperDimension A5Extra: " 492 667 "
*PaperDimension A5ExtraTrans: " 492 667 "
*PaperDimension B4Extra: " 801 1104 "
*PaperDimension B4ExtraTrans: " 801 1104 "
*PaperDimension B5Extra: " 588 801 "
*PaperDimension B5ExtraTrans: " 588 801 "
*PaperDimension Note: "612 792"
*PaperDimension Statement: "396 612"
*PaperDimension 10x14: "720 1008 "
*PaperDimension Folio: "612 936"
*PaperDimension 11x17: "792 1224"
*PaperDimension Broadsheet: "1296 1584"
*PaperDimension Newspage: "960 1638"
*PaperDimension 12x18: "864 1296"
*PaperDimension 18x24: "1296 1728"
*PaperDimension MaxPG: "1296 3240"
*RequiresPageRegion All: True
*%==== Custom Page Sizes =============================
*CustomPageSize True: "exch pop statusdict /setpageparams get exec"
*ParamCustomPageSize Width: 1 points 0 1296
*ParamCustomPageSize Height: 2 points 0 3240
*ParamCustomPageSize WidthOffset: 3 points 0 1296
*ParamCustomPageSize HeightOffset: 4 points 0 0
*ParamCustomPageSize Orientation: 5 points 0 1
*CenterRegistered: True
*MaxMediaWidth: "1296"
*HWMargins: 0 0 0 0
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get
{(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *ManualFeed
*%=== Imagesetter Information =========================
*OpenGroup: Imagesetter
*OpenUI *MirrorPrint/Mirror Print: Boolean
*OrderDependency: 40 AnySetup *MirrorPrint
*MirrorPrint True: "true statusdict /setmirrorprint get exec"
*MirrorPrint False: "false statusdict /setmirrorprint get exec"
*DefaultMirrorPrint: False
*?MirrorPrint: "save statusdict /mirrorprint get exec
{(True)}{(False)}ifelse = flush restore"
*End
*CloseUI: *MirrorPrint
*OpenUI *NegativePrint/Negative Print: Boolean
*OrderDependency: 40 AnySetup *NegativePrint
*NegativePrint True: "true statusdict /setnegativeprint get exec"
*NegativePrint False: "false statusdict /setnegativeprint get exec"
*DefaultNegativePrint: False
*?NegativePrint: "save statusdict /negativeprint get exec
{(True)}{(False)}ifelse = flush restore"
*End
*CloseUI: *NegativePrint
*CloseGroup Imagesetter
*% Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(002.002)" Standard ROM
*Font Courier-Bold: Standard "(002.002)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.002)" Standard ROM
*Font Courier-Oblique: Standard "(002.002)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Bookman-Demi: Standard "(001.001)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM
*Font Bookman-Light: Standard "(001.001)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.001)" Standard ROM
*Font Helvetica-Condensed: Standard "(001.001)" Standard ROM
*Font Helvetica-Condensed-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-Condensed-BoldObl: Standard "(001.002)" Standard ROM
*Font Helvetica-Condensed-Oblique: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
{
count 1 gt {
exch dup 128 string cvs (/) print print (:) print
dup FontDirectory exch known {pop (Yes)}
{
(fonts/ )
dup 3 -1 roll 128 string cvs dup length /len exch def
6 exch putinterval
0 len 6 add getinterval mark exch
{ } 128 string filenameforall counttomark 0 gt {
cleartomark (Yes)}{cleartomark (No)}ifelse
}ifelse =
}{ exit } ifelse
} bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush
/filenameforall where {
pop (fonts/*) {
dup length 6 sub 6 exch getinterval cvn ==
} bind
128 string filenameforall flush
} if
(*) = flush
restore
"
*End
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: Wait - cycling up"
*Status: "PrinterError: Failed printerstart: !BEG.."
*Status: "PrinterError: Off Line"
*Status: "PrinterError: Transport fault"
*Status: "PrinterError: Default Page being defined is too large.."
*Status: "PrinterError: No response from LSTA command"
*Status: "PrinterError: Out of Media"
*Status: "PrinterError: Run--ready for next feed"
*Status: "PrinterError: No response from DEPT command"
*Status: "PrinterError: Run--not ready for feed command"
*Status: "PrinterError: No response from HRES command"
*Status: "PrinterError: Command rejected--unrecognized"
*Status: "PrinterError: No response from SCRN command"
*Status: "PrinterError: Command rejected--illegal sequence"
*Status: "PrinterError: No response from WIDT command"
*Status: "PrinterError: Wait--waiting for configuration"
*Status: "PrinterError: Printer not responding..."
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*PrinterError: "Wait - cycling up"
*PrinterError: "PrintXferBusy for too long.."
*PrinterError: "Failed printerstart: !BEG.."
*PrinterError: "Off Line"
*PrinterError: "Transport fault"
*PrinterError: "Default Page being defined is too large.."
*PrinterError: "No response from LSTA command"
*PrinterError: "Out of Media"
*PrinterError: "Printer was never ready to start band:!STA.."
*PrinterError: "No response from DEPT command"
*PrinterError: "Run--not ready for feed command"
*PrinterError: "No response from HRES command"
*PrinterError: "Command rejected--unrecognized"
*PrinterError: "No response from SCRN command"
*PrinterError: "Command rejected--illegal sequence"
*PrinterError: "No response from WIDT command"
*PrinterError: "Wait--waiting for configuration"
*PrinterError: "Printer not responding..."
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.65lpi.1446dpi/65 lpi / 1446 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 65 lpi / 1446 dpi (10,10,4,12,12,4,40/3,0) ==================
*ColorSepScreenAngle ProcessBlack.65lpi.1446dpi/65 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.65lpi.1446dpi/65 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.65lpi.1446dpi/65 lpi / 1446 dpi: "75.0042"
*ColorSepScreenAngle ProcessMagenta.65lpi.1446dpi/65 lpi / 1446 dpi: "14.9958"
*ColorSepScreenAngle ProcessYellow.65lpi.1446dpi/65 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.65lpi.1446dpi/65 lpi / 1446 dpi: "65.7306"
*ColorSepScreenFreq CustomColor.65lpi.1446dpi/65 lpi / 1446 dpi: "65.7306"
*ColorSepScreenFreq ProcessCyan.65lpi.1446dpi/65 lpi / 1446 dpi: "65.7339"
*ColorSepScreenFreq ProcessMagenta.65lpi.1446dpi/65 lpi / 1446 dpi: "65.7339"
*ColorSepScreenFreq ProcessYellow.65lpi.1446dpi/65 lpi / 1446 dpi: "65.7273"
*% For 82 lpi / 1446 dpi ===============================
*ColorSepScreenAngle ProcessBlack.82lpi.1446dpi/82 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.82lpi.1446dpi/82 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.82lpi.1446dpi/82 lpi / 1446 dpi: "74.9987"
*ColorSepScreenAngle ProcessMagenta.82lpi.1446dpi/82 lpi / 1446 dpi: "15.0013"
*ColorSepScreenAngle ProcessYellow.82lpi.1446dpi/82 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.82lpi.1446dpi/82 lpi / 1446 dpi: "82.1633"
*ColorSepScreenFreq CustomColor.82lpi.1446dpi/82 lpi / 1446 dpi: "82.1633"
*ColorSepScreenFreq ProcessCyan.82lpi.1446dpi/82 lpi / 1446 dpi: "82.1600"
*ColorSepScreenFreq ProcessMagenta.82lpi.1446dpi/82 lpi / 1446 dpi: "82.547"
*ColorSepScreenFreq ProcessYellow.82lpi.1446dpi/82 lpi / 1446 dpi: "82.1591"
*% For 100 lpi / 1446 dpi ===============================
*ColorSepScreenAngle ProcessBlack.100lpi.1446dpi/100 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.100lpi.1446dpi/100 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.100lpi.1446dpi/100 lpi / 1446 dpi: "74.9987"
*ColorSepScreenAngle ProcessMagenta.100lpi.1446dpi/100 lpi / 1446 dpi: "15.0013"
*ColorSepScreenAngle ProcessYellow.100lpi.1446dpi/100 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.100lpi.1446dpi/100 lpi / 1446 dpi: "100.4220"
*ColorSepScreenFreq CustomColor.100lpi.1446dpi/100 lpi / 1446 dpi: "100.4220"
*ColorSepScreenFreq ProcessCyan.100lpi.1446dpi/100 lpi / 1446 dpi: "100.4180"
*ColorSepScreenFreq ProcessMagenta.100lpi.1446dpi/100 lpi / 1446 dpi: "100.4180"
*ColorSepScreenFreq ProcessYellow.100lpi.1446dpi/100 lpi / 1446 dpi: "100.4170"
*% For 109 lpi / 1446 dpi ===============================
*ColorSepScreenAngle ProcessBlack.109lpi.1446dpi/109 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.109lpi.1446dpi/109 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.109lpi.1446dpi/109 lpi / 1446 dpi: "74.9987"
*ColorSepScreenAngle ProcessMagenta.109lpi.1446dpi/109 lpi / 1446 dpi: "15.0013"
*ColorSepScreenAngle ProcessYellow.109lpi.1446dpi/109 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.109lpi.1446dpi/109 lpi / 1446 dpi: "109.5510"
*ColorSepScreenFreq CustomColor.109lpi.1446dpi/109 lpi / 1446 dpi: "109.5510"
*ColorSepScreenFreq ProcessCyan.109lpi.1446dpi/109 lpi / 1446 dpi: "109.5470"
*ColorSepScreenFreq ProcessMagenta.109lpi.1446dpi/109 lpi / 1446 dpi: "109.5470"
*ColorSepScreenFreq ProcessYellow.109lpi.1446dpi/109 lpi / 1446 dpi: "109.5450"
*% For 117 lpi / 1446 dpi ===============================
*ColorSepScreenAngle ProcessBlack.117lpi.1446dpi/117 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.117lpi.1446dpi/117 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.117lpi.1446dpi/117 lpi / 1446 dpi: "74.9987"
*ColorSepScreenAngle ProcessMagenta.117lpi.1446dpi/117 lpi / 1446 dpi: "15.0013"
*ColorSepScreenAngle ProcessYellow.117lpi.1446dpi/117 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.117lpi.1446dpi/117 lpi / 1446 dpi: "117.6950"
*ColorSepScreenFreq CustomColor.117lpi.1446dpi/117 lpi / 1446 dpi: "117.6950"
*ColorSepScreenFreq ProcessCyan.117lpi.1446dpi/117 lpi / 1446 dpi: "117.6980"
*ColorSepScreenFreq ProcessMagenta.117lpi.1446dpi/117 lpi / 1446 dpi: "117.6980"
*ColorSepScreenFreq ProcessYellow.117lpi.1446dpi/117 lpi / 1446 dpi: "117.6980"
*% For 133 lpi / 1446 dpi ===============================
*ColorSepScreenAngle ProcessBlack.133lpi.1446dpi/133 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.133lpi.1446dpi/133 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.133lpi.1446dpi/133 lpi / 1446 dpi: "75.0004"
*ColorSepScreenAngle ProcessMagenta.133lpi.1446dpi/133 lpi / 1446 dpi: "14.9996"
*ColorSepScreenAngle ProcessYellow.133lpi.1446dpi/133 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.133lpi.1446dpi/133 lpi / 1446 dpi: "133.6570"
*ColorSepScreenFreq CustomColor.133lpi.1446dpi/133 lpi / 1446 dpi: "133.6570"
*ColorSepScreenFreq ProcessCyan.133lpi.1446dpi/133 lpi / 1446 dpi: "133.6580"
*ColorSepScreenFreq ProcessMagenta.133lpi.1446dpi/133 lpi / 1446 dpi: "133.6580"
*ColorSepScreenFreq ProcessYellow.133lpi.1446dpi/133 lpi / 1446 dpi: "133.6640"
*% For 146 lpi / 1446 dpi ===============================
*ColorSepScreenAngle ProcessBlack.146lpi.1446dpi/146 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle CustomColor.146lpi.1446dpi/146 lpi / 1446 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.146lpi.1446dpi/146 lpi / 1446 dpi: "74.9987"
*ColorSepScreenAngle ProcessMagenta.146lpi.1446dpi/146 lpi / 1446 dpi: "15.0013"
*ColorSepScreenAngle ProcessYellow.146lpi.1446dpi/146 lpi / 1446 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.146lpi.1446dpi/146 lpi / 1446 dpi: "146.0680"
*ColorSepScreenFreq CustomColor.146lpi.1446dpi/146 lpi / 1446 dpi: "146.0680"
*ColorSepScreenFreq ProcessCyan.146lpi.1446dpi/146 lpi / 1446 dpi: "146.0620"
*ColorSepScreenFreq ProcessMagenta.146lpi.1446dpi/146 lpi / 1446 dpi: "146.0620"
*ColorSepScreenFreq ProcessYellow.146lpi.1446dpi/146 lpi / 1446 dpi: "146.0610"
*ColorSepScreenProc ProcessYellow.65lpi.1446dpi/65 lpi / 1446 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }"
*End
*% The byte count of this file should be exactly 025028 or 025655
*% depending on the filesystem it resides in.
*% end of PPD file for the Autologic APS-6/108h | APS-6/108ch imagers