home *** CD-ROM | disk | FTP | other *** search
- id m0u8zKy-0007rqa; Mon, 15 Apr 96 19:13 MDT
- Sender: owner-executor
- Received: from ardi.com by ftp.ardi.com
- (Smail3.1.29.1 #3) id m0u8zKO-0007rjn; Mon, 15 Apr 96 19:13 MDT
- Path: sloth.swcp.com!tesuque.cs.sandia.gov!ferrari.mst6.lanl.gov!newshost.lanl.gov!ncar!newsxfer.itd.umich.edu!news.mathworks.com!news.duke.edu!godot.cc.duq.edu!newsfeed.pitt.edu!scramble.lm.com!news.math.psu.edu!lepidopteran.cse.psu.edu!uwm.edu!math.ohio-state.edu!jussieu.fr!oleane!plug.news.pipex.net!pipex!tank.news.pipex.net!pipex!news.sprintlink.net!hermes.is.co.za!dodo.global.co.za!news
- From: evaluna@global.co.za (Terry)
- Newsgroups: comp.emulators.mac.executor
- Subject: Re: Using Mac CD-ROMs
- Date: Mon, 15 Apr 1996 10:27:07 GMT
- Organization: Global Internet access
- Lines: 36
- Message-ID: <4ktetl$kg1@dodo.global.co.za>
- References: <31068456.46BB@eds.com> <4e74j9$c8h@orion.cybercom.net>
- NNTP-Posting-Host: anx_10.global.co.za
- X-Newsreader: Forte Free Agent 1.0.82
- To: executor@ardi.com
- X-MailNews-Gateway: From newsgroup comp.emulators.mac.executor
- Sender: owner-executor@ardi.com
- Precedence: bulk
-
- churchill@cybercom.net (Red October) wrote:
-
- >"Karl D. Fleischmann" <AHIPC1J.KFLEIS01@eds.com> wrote:
-
- >>I have the demo version of 1.99q running on a 486DX33 with a Sony IDE
- >>CDROM Drive. I have some Mac CD's that I have been trying to run but it
- >>doesn't seem to recognize them. Has anyone tried this or gotten this to
- >>work? Is this something that should work? I scanned the FAQ but didn't
- >>see anything about using MAC CD's.
-
- >>I am able to read some DOS CD and other Windows CD (see the directory at
- >>least). I am using WIN95 and I've tried running it under windows and
- >>also tried to run it when booting to dos neither could recognize the Mac
- >>CD's.
-
- >>Any help is apreciated.
-
-
- >>Thanks
- >>Karl
-
- >I think you need a SCSI CD-ROM drive to look at/use Mac CD-ROMs.
-
-
- No, Executor uses MSCDEX to read Mac CDs.Win 95 disables this driver,
- so either delete the 'rem' in your config.sys or specify a new
- configuration (Right click/Properties/Program/Advanced)
-
- Hope this helps
-
-
- Terry Engelbrecht
- Johannesburg
- South Africa
- evaluna@global.co.za
-
-
-
-