home *** CD-ROM | disk | FTP | other *** search
Wrap
Received: from mail04.mail.aol.com (mail04.mail.aol.com [152.163.172.53]) by nacm.com (8.6.10/8.6.9) with ESMTP id KAA06464 for <executor@nacm.com>; Fri, 1 Sep 1995 10:30:42 -0700 From: Markmage@aol.com Received: by mail04.mail.aol.com (8.6.12/8.6.12) id NAA29237 for executor@nacm.com; Fri, 1 Sep 1995 13:30:41 -0400 Date: Fri, 1 Sep 1995 13:30:41 -0400 Message-ID: <950901133028_88993204@mail04.mail.aol.com> To: executor@nacm.com Subject: floppies & executor/Linux Sender: owner-paper@nacm.com Precedence: bulk If this is not the right forum for this sort of post, tell where to direct my queries, and I will move on. I was a Mac user for 10 years, and reluctantly last year switched to a 486PC. I'm running Linux, and just installed Executor. On first pass, I'm pretty happy with Executor; a lot of it looks familiar, and I can do a number of Mac-like things without needing Executor specific documentation. However, the Exectuor documentation I have found is very POOR, and there are some basic things I cannot figure out how to do. Yes, I have read all the FAQs I can lay my hands on; still no help. Here's the problem: I want to be able to read my old Mac floppy disks from Executor. It looks like Executor will happily check my A: drive for a floppy, but my A: drive is a 5 1/4 drive that will never have a Mac disk in it. My 3 1/2 inch drive is the B: drive. How do I get Executor to read the B: drive? -Mark Stone aka markmage@aol.com