home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
NeXTSTEP 3.3.4.17 [SPARC, PA-RISC]
/
nextstep33_risc.iso
/
NextLibrary
/
PrinterTypes
/
German.lproj
/
HP_LaserJet_III_PostScript_Cartridge.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1993-04-09
|
13KB
|
381 lines
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "2.2"
*PCFileName: "HPIII522.PPD"
*LanguageVersion: German
*Product: "(HP LaserJet III)"
*PSVersion: "(52.2) 0"
*ModelName: "HP LaserJet III PostScript Cartridge"
*NickName: "HP LaserJet III PostScript Cartridge v52.2"
*% General Information and Defaults ===============
*FreeVM: "264000"
*LanguageLevel: "1"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*FileSystem: False
*Throughput: "8"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*DefaultResolution: 300dpi/300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
"
*End
*OpenUI *Smoothing/RET: PickOne
*OrderDependency: 50 AnySetup *Smoothing
*DefaultSmoothing: Medium
*Smoothing None/Ein: "0 statusdict /setdoret get exec"
*Smoothing Light/Hell: "1 statusdict /setdoret get exec"
*Smoothing Medium/Mittel: "2 statusdict /setdoret get exec"
*Smoothing Dark/Dunkel: "3 statusdict /setdoret get exec"
*?Smoothing: "
save
[(None)(Light)(Medium)(Dark)(Unknown)] statusdict /doret get exec
dup 3 gt{pop 4}if get = flush
restore
"
*End
*CloseUI: *Smoothing
*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }
"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize/Seitengröße: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "statusdict /lettertray get exec"
*PageSize Legal/Legal: "statusdict /legaltray get exec"
*PageSize Executive/Executive: "statusdict /executivetray get exec"
*PageSize A4/A4: "statusdict /a4tray get exec"
*PageSize B5/B5: "statusdict /b5tray get exec"
*PageSize Comm10/Comm #10-Umschlag: "statusdict /com10envelopetray get exec"
*PageSize Monarch/Monarch-Umschlag: "statusdict /monarcenvelopetray get exec"
*PageSize DL/DL-Umschlag: "statusdict /dlenvelopetray get exec"
*PageSize C5/C5-Umschlag: "statusdict /c5envelopetray get exec"
*?PageSize: "
save
8 dict
dup /lettertray (Letter) put
dup /legaltray (Legal) put
dup /executivetray (Executive) put
dup /a4tray (A4) put
dup /b5tray (B5) put
dup /com10envelopetray (Comm10) put
dup /monarcenvelopetray (Monarch) put
dup /dlenvelopetray (DL) put
dup /c5envelopetray (C5) put
statusdict /papersize get exec
3 1 roll {get} stopped {(Unknown)}if
exch not { print (.Transverse) }if
= flush
restore
"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion/Seitenbereich: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "letter"
*PageRegion Legal/Legal: "legal"
*PageRegion Executive/Executive: "executivepage"
*PageRegion A4/A4: "a4"
*PageRegion B5/B5: "b5"
*PageRegion Comm10/Comm #10-Umschlag: "com10envelope"
*PageRegion Monarch/Monarch-Umschlag: "monarcenvelope"
*PageRegion DL/DL-Umschlag: "dlenvelope"
*PageRegion C5/C5-Umschlag: "c5envelope"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "18 19 593 774 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Executive: "18 19 501 738 "
*ImageableArea A4: "18 19 578 824 "
*ImageableArea B5:"18 19 505 713"
*ImageableArea Comm10/Comm #10-Umschlag: "18 19 278 666 "
*ImageableArea Monarch/Monarch-Umschlag: "18 19 259 522 "
*ImageableArea DL/DL-Umschlag: "18 19 294 605 "
*ImageableArea C5/C5-Umschlag: "18 19 440 630 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Executive: "522 756"
*PaperDimension A4: "595 842"
*PaperDimension B5: "516 729"
*PaperDimension Comm10/Comm #10-Umschlag: "297 684"
*PaperDimension Monarch/Monarch-Umschlag: "279 540"
*PaperDimension DL/DL-Umschlag: "312 624"
*PaperDimension C5/C5-Umschlag: "459 649"
*RequiresPageRegion All: True
*LandscapeOrientation: Plus90
*OpenUI *InputSlot/Zufuhrschacht: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Cassette
*InputSlot Cassette/Kassette: "0 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Cassette) ] statusdict /papertray get exec
{get exec} stopped { pop pop (Unknown)} if = flush
restore
"
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed/Manuelle Papierzufuhr: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True/Richtig: "statusdict /manualfeed true put"
*ManualFeed False/Falsch: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore"
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Normal
*OpenUI *TraySwitch/Papieraufnahme-Schalter: Boolean
*OrderDependency: 50 AnySetup *TraySwitch
*DefaultTraySwitch: False
*TraySwitch True/Richtig: "true statusdict /settrayswitch get exec"
*TraySwitch False/Falsch: "false statusdict /settrayswitch get exec"
*?TraySwitch: "
save
statusdict /trayswitch get exec {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *TraySwitch
*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Bookman-Demi: Standard "(001.001)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM
*Font Bookman-Light: Standard "(001.001)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.001)" Standard ROM
*Font Courier: Standard "(002.002)" Standard ROM
*Font Courier-Bold: Standard "(002.002)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.002)" Standard ROM
*Font Courier-Oblique: Standard "(002.002)" Standard ROM
*Font Helvetica: Standard "(001.002)" Standard ROM
*Font Helvetica-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.002)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.004)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.003)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.004)" Standard ROM
*Font Palatino-Bold: Standard "(001.002)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.002)" Standard ROM
*Font Palatino-Italic: Standard "(001.002)" Standard ROM
*Font Palatino-Roman: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*Font Times-Bold: Standard "(001.002)" Standard ROM
*Font Times-BoldItalic: Standard "(001.004)" Standard ROM
*Font Times-Italic: Standard "(001.002)" Standard ROM
*Font Times-Roman: Standard "(001.002)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.003)" Standard ROM
*Font ZapfDingbats: Special "(001.002)" Special ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
{
count 1 gt
{
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
}
{exit} ifelse
}bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "PrinterError: Out Of Paper"
*Status: "PrinterError: Cover Open"
*Status: "PrinterError: Feed Manual"
*Status: "PrinterError: Paper Jam"
*Status: "PrinterError: Miscellaneous Error"
*Status: "PrinterError: Fatal Error"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "Out Of Paper"
*PrinterError: "Cover Open"
*PrinterError: "Feed Manual"
*PrinterError: "Paper Jam"
*PrinterError: "Miscellaneous Error"
*PrinterError: "Fatal Error"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Prozess Schwarz
*InkName: CustomColor/Eigene Farbe
*InkName: ProcessCyan/Prozess Zyanblau
*InkName: ProcessMagenta/Prozess Magenta
*InkName: ProcessYellow/Prozess Gelb
*% For 60 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "HP LaserJet III" version 52.2
*% Produced by "BuildPPD.ps" version 3.0 edit 58
*% Converted to meet 4.0 specification
*% Last Edit Date: Oct 7 1992
*% The byte count of this file should be exactly 012732 or 013112
*% depending on the filesystem it resides in.
*% end of PPD file for HP LaserJet III