home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
NeXTSTEP 3.3.4.17 [SPARC, PA-RISC]
/
nextstep33_risc.iso
/
NextLibrary
/
PrinterTypes
/
German.lproj
/
Apple_LaserWriter_II_NTX.ppd
next >
Wrap
PostScript Printer Description
|
1993-08-31
|
12KB
|
341 lines
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1988-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*%
*%
*FormatVersion: "4.0"
*FileVersion: "3.0"
*PCFileName: "LWNTX470.PPD"
*LanguageVersion: German
*Product: "(LaserWriter II NTX)"
*PSVersion: "(47.0) 1"
*ModelName: "Apple LaserWriter II NTX"
*NickName: "Apple LaserWriter II NTX v47.0"
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "434204"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: True
*?FileSystem: "
save
statusdict /diskonline get exec {(True)}{(False)} ifelse = flush
restore
"
*End
*Throughput: "8"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*DefaultResolution: 300dpi/300 dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{dup mul exch dup mul add 1.0 exch sub }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize/Seitengröße: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "statusdict /lettertray get exec"
*PageSize Legal/Legal: "statusdict /legaltray get exec"
*PageSize A4/A4: "statusdict /a4tray get exec"
*PageSize B5/B5: "statusdict /b5tray get exec"
*PageSize LetterSmall/Letter (klein): "statusdict /lettertray get exec lettersmall"
*PageSize A4Small/A4 (klein): "statusdict /a4tray get exec a4small"
*PageSize Monarch/Monarch-Umschlag vom Zentrum zugeführt: "statusdict /lettertray get exec"
*PageSize Com10/Com10-Umschlag vom Zentrum zugeführt: "statusdict /lettertray get exec"
*?PageSize: "
save
[(Letter)(Legal)] statusdict /pagetype get exec
{get} stopped { pop pop (Unknown)} if = flush
restore
"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion/Seitenbereich: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "letter"
*PageRegion Legal/Legal: "legal"
*PageRegion A4/A4: "a4"
*PageRegion B5/B5: "b5"
*PageRegion LetterSmall/Letter (klein): "lettersmall"
*PageRegion A4Small/A4 (klein): "a4small"
*PageRegion Monarch/Monarch-Umschlag vom Zentrum zugeführt: "letter"
*PageRegion Com10/Com10-Umschlag vom Zentrum zugeführt: "letter"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "15 8 597 784 "
*ImageableArea Legal: "15 8 597 1000 "
*ImageableArea A4: "13 10 577 832 "
*ImageableArea B5: "21 10 500 715 "
*ImageableArea LetterSmall: "31 31 583 761 "
*ImageableArea A4Small: "27 31 567 811 "
*ImageableArea Monarch/Monarch-Umschlag vom Zentrum zugeführt: "181.5 8 445.5 540"
*ImageableArea Com10/Com10-Umschlag vom Zentrum zugeführt: "172.5 8 454.5 684"
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension A4: "595 842"
*PaperDimension B5: "516 729"
*PaperDimension LetterSmall: "612 792"
*PaperDimension A4Small: "595 842"
*PaperDimension Monarch/Monarch-Umschlag vom Zentrum zugeführt: "279 540"
*PaperDimension Com10/Com10-Umschlag vom Zentrum zugeführt: "297 684"
*RequiresPageRegion All: True
*OpenUI *InputSlot/Zufuhrschacht: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Cassette
*InputSlot Cassette/Kassette: ""
*CloseUI: *InputSlot
*OpenUI *ManualFeed/ManuellePapierzufuhr: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True/Ja: "statusdict /manualfeed true put"
*ManualFeed False/Nein: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Normal
*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-BookOblique: Standard "(001.001)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.001)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.001)" Standard ROM
*Font Bookman-Demi: Standard "(001.001)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM
*Font Bookman-Light: Standard "(001.001)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.001)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.004)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.004)" Standard ROM
*Font Courier-Oblique: Standard "(001.004)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard ROM
*Font Palatino-Bold: Standard "(001.000)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
*Font Palatino-Italic: Standard "(001.000)" Standard ROM
*Font Palatino-Roman: Standard "(001.000)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.002)" Standard ROM
*Font ZapfDingbats: Special "(001.000)" Special ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
{
count 1 gt
{
exch dup str 6 94 getinterval cvs
(/) print dup print (:) print exch
FontDirectory exch known
{ pop (Yes) }
{
length 6 add str 0 3 -1 roll getinterval
mark exch status
{cleartomark (Yes)}{cleartomark (No)} ifelse
} ifelse =
}
{exit} ifelse
}bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush
/filenameforall where
{
pop (fonts/*)
{ dup length 6 sub 6 exch getinterval cvn == } bind
128 string filenameforall flush
} if
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: timeout, clearing printer"
*Status: "PrinterError: warming up"
*Status: "PrinterError: service call"
*Status: "PrinterError: paper entry misfeed"
*Status: "PrinterError: no toner cartridge"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "timeout, clearing printer"
*PrinterError: "warming up"
*PrinterError: "service call"
*PrinterError: "paper entry misfeed"
*PrinterError: "no toner cartridge"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Vierfarbdruck Schwarz
*InkName: CustomColor/Anwenderdefinierte Farbe
*InkName: ProcessCyan/Vierfarbdruck Zyanblau
*InkName: ProcessMagenta/Vierfarbdruck Magenta
*InkName: ProcessYellow/Vierfarbdruck Gelb
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "LaserWriter II NTX" version 47.0
*% Produced by "GETapd.ps" version 2.0 edit 48
*% Converted to meet 4.0 specification
*% Last Edit Date: Mar 2 1992
*% The byte count of this file should be exactly 010941 or 011272
*% depending on the filesystem it resides in.
*% end of PPD file for LaserWriter II NTX