home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
NeXTSTEP 3.3.4.17 [SPARC, PA-RISC]
/
nextstep33_risc.iso
/
NextLibrary
/
PrinterTypes
/
English.lproj
/
Tektronix_Phaser_200i.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1995-02-06
|
14KB
|
432 lines
*PPD-Adobe: "4.1"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1993 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*% Tektronix (R) is a registered trademark of Tektronix, Inc.
*% TekColor TM is a trademark of Tektronix, Inc.
*% Phaser TM is a trademark of Tektronix, Inc., for color printers and
*% related products.
*FormatVersion: "4.1"
*FileVersion: "1.4"
*LanguageVersion: English
*PCFileName: "TKP200I2.PPD"
*Product: "(Phaser 200i)"
*PSVersion: "(2011.108) 3"
*ModelName: "Tektronix Phaser 200i v2011.108(3)"
*ShortNickName: "Tektronix Phaser 200i(3)"
*NickName: "Tektronix Phaser 200i v2011.108(3)"
*% === Options and Constraints =========
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1
*OpenUI *Option2/Memory Configuration: PickOne
*DefaultOption2: None
*Option2 None/Standard 6 MB RAM: ""
*Option2 10Meg/10 MB Total RAM: ""
*Option2 14Meg/14 MB Total RAM: ""
*CloseUI: *Option2
*CloseGroup: InstallableOptions
*% ==== Device Capabilities ===============
*LanguageLevel: "2"
*Protocols: BCP
*StartEmulator_hpgl: "currentfile /hpgl statusdict /emulate get exec "
*StopEmulator_hpgl: "<1B7F>0"
*FreeVM: "929640"
*ColorDevice: True
*DefaultColorSpace: CMYK
*VariablePaperSize: False
*FileSystem:True
*?FileSystem: "
save false
(%disk?%)
{ currentdevparams dup /Writeable known
{ /Writeable get {pop true} if } { pop } ifelse
} 10 string /IODevice resourceforall
{(True)}{(False)} ifelse = flush
restore
"
*End
*Throughput: "1"
*Password: "()"
*ExitServer: "
count 0 eq
{ false } { true exch startjob } ifelse
not {
(WARNING: Cannot modify initial VM.) =
(Missing or invalid password.) =
(Please contact the author of this software.) = flush quit
} if
"
*End
*Reset: "
count 0 eq
{ false } { true exch startjob } ifelse
not {
(WARNING: Cannot reset printer.) =
(Missing or invalid password.) =
(Please contact the author of this software.) = flush quit
} if
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*DefaultResolution: 300dpi
*Resolution 300dpi: "1 dict dup /HWResolution [300 300] put setpagedevice"
*?Resolution: "
save
currentpagedevice /HWResolution get
0 get
( ) cvs print
(dpi)
= flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "68.0"
*DefaultScreenProc: TekHalftone
*ScreenProc TekHalftone: "
mark
{ 25 string dup 0 (Halftone-) putinterval dup 9
[ (CoatedPaper*) (PlainPaper*) (Transparency*) ]
/RRCustomProcs /ProcSet findresource /mediainfo get exec
get putinterval (*) search pop 3 1 roll pop pop cvn
/Halftone findresource /GraySpotFunction get
exch
} stopped pop cleartomark
"
*End
*SpotFunctionLine: "{ pop }"
*SpotFunctionEllipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Code in this section both selects a tray and sets up a frame buffer.
*OpenUI *PageSize: PickOne
*OrderDependency: 20 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "
2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
*End
*PageSize Letter.Perf/Letter Perf: "
2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
*End
*PageSize A4/A4: "
2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
*End
*PageSize A4.Perf/A4 Perf: "
2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
*End
*?PageSize: "
save
currentpagedevice /PageSize get aload pop
2 copy gt {exch} if
(Unknown)
4 dict
dup [612 792] (Letter) put
dup [612 792] (Letter Perf) put
dup [595 842] (A4) put
dup [595 842] (A4 Perf) put
{ exch aload pop 4 index sub abs 5 le exch
5 index sub abs 5 le and
{exch pop exit} {pop} ifelse
} bind forall
= flush pop pop
restore
"
*End
*CloseUI: *PageSize
*OpenUI *PageRegion: PickOne
*OrderDependency: 30 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "
2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion Letter.Perf/Letter Perf: "
2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion A4/A4: "
2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion A4.Perf/A4 Perf: "
2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
*End
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/Letter: "14.1733 59.6476 597.853 777.247"
*ImageableArea Letter.Perf/Letter Perf: "14.1733 14.2933 597.853 777.493"
*ImageableArea A4/A4: "14.1733 59.6476 582.493 827.648"
*ImageableArea A4.Perf/A4 Perf: "14.1733 14.2933 582.493 827.893"
*?ImageableArea: "
save
/cvp { ( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter/Letter: "612 792"
*PaperDimension Letter.Perf/Letter Perf: "612 792"
*PaperDimension A4/A4: "595 842"
*PaperDimension A4.Perf/A4 Perf: "595 842"
*RequiresPageRegion All: False
*% Tray Selection ===================
*% Code in this section both selects an input tray
*OpenUI *InputSlot: PickOne
*OrderDependency: 40 AnySetup *InputSlot
*DefaultInputSlot:Unknown
*InputSlot Lower: "
currentpagedevice /InputAttributes get
{1 get} stopped
{pop pop}
{ 2 dict dup /InputAttributes
1 dict dup /Priority [1] put put dup
/TraySwitch false put
setpagedevice
} ifelse
"
*End
*InputSlot Upper: "
currentpagedevice /InputAttributes get
{0 get} stopped
{pop pop}
{ 2 dict dup /InputAttributes
1 dict dup /Priority [0] put put dup
/TraySwitch false put
setpagedevice
} ifelse
"
*End
*?InputSlot: "
save
2 dict
dup /0 (Lower) put
dup /1 (Upper) put
currentpagedevice /InputAttributes get
dup /Priority known
{ /Priority get 0 get ( ) cvs cvn get }
{
dup length 1 eq
{ {pop} forall ( ) cvs cvn get }
{ pop pop (Unknown) } ifelse
} ifelse
= flush
restore
"
*End
*CloseUI: *InputSlot
*DefaultOutputBin: OnlyOne
*DefaultOutputOrder: Reverse
*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Bookman-Demi: Standard "(001.003)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.003)" Standard ROM
*Font Bookman-Light: Standard "(001.003)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.003)" Standard ROM
*Font Courier: Standard "(002.003)" Standard ROM
*Font Courier-Bold: Standard "(002.003)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
*Font Courier-Oblique: Standard "(002.003)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Condensed: Standard "(001.001)" Standard ROM
*Font Helvetica-Condensed-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-Condensed-BoldObl: Standard "(001.002)" Standard ROM
*Font Helvetica-Condensed-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.008)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.005)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.006)" Standard ROM
*Font Palatino-Bold: Standard "(001.005)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005)" Standard ROM
*Font Palatino-Italic: Standard "(001.005)" Standard ROM
*Font Palatino-Roman: Standard "(001.005)" Standard ROM
*Font Symbol: Special "(001.007)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.006)" Standard ROM
*Font ZapfDingbats: Special "(001.004)" Special ROM
*?FontQuery: "
save
{ count 1 gt
{ exch dup 127 string cvs (/) print print (:) print
/Font resourcestatus {pop pop (Yes)} {(No)} ifelse =
} { exit } ifelse
} bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
(*) {cvn ==} 128 string /Font resourceforall
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ] %%)
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "initializing"
*Status: "printing"
*Status: "printer printing test print"
*Status: "printer is warming up"
*Status: "thermal head temperature"
*Status: "transfer roll low"
*Status: "lower tray empty"
*Status: "upper tray empty"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "Serial"
*Source: "LocalTalk"
*Source: "Parallel"
*Source: "EtherTalk"
*Source: "Internal"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "upper tray empty"
*PrinterError: "lower tray empty"
*PrinterError: "transfer roll empty"
*PrinterError: "misfeed"
*PrinterError: "cover is open"
*PrinterError: "execute command not ready"
*PrinterError: "requires service"
*PrinterError: "communication error"
*PrinterError: "unknown communication error"
*PrinterError: "unsupported transfer roll type"
*PrinterError: "unsupported engine type"
*PrinterError: "unsupported engine firmware"
*PrinterError: "printer is not ready"
*PrinterError: "transmit error"
*PrinterError: "not ready"
*PrinterError: "unsolicited response"
*PrinterError: "framing error"
*PrinterError: "overrun error"
*PrinterError: "parity error"
*PrinterError: "received break"
*PrinterError: "transmit buffer full"
*PrinterError: "receive buffer full"
*PrinterError: "transfer roll jam"
*PrinterError: "paper jam"
*PrinterError: "internal interface error"
*PrinterError: "printer engine failure"
*PrinterError: "paper misfeed"
*PrinterError: "print engine starved"
*PrinterError: "drum position error"
*PrinterError: "strove error"
*PrinterError: "head up/down error"
*PrinterError: "paper pickup jam"
*PrinterError: "tray empty"
*PrinterError: "cover was opened"
*PrinterError: "pickup failed, check cover"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 80 lpi / 300 dpi ================================
*ColorSepScreenAngle ProcessBlack.80lpi.300dpi/80 lpi / 300 dpi: "33.0"
*ColorSepScreenAngle CustomColor.80lpi.300dpi/80 lpi / 300 dpi: "33.0"
*ColorSepScreenAngle ProcessCyan.80lpi.300dpi/80 lpi / 300 dpi: "33.0"
*ColorSepScreenAngle ProcessMagenta.80lpi.300dpi/80 lpi / 300 dpi: "33.0"
*ColorSepScreenAngle ProcessYellow.80lpi.300dpi/80 lpi / 300 dpi: "33.0"
*ColorSepScreenFreq ProcessBlack.80lpi.300dpi/80 lpi / 300 dpi: "80.0"
*ColorSepScreenFreq CustomColor.80lpi.300dpi/80 lpi / 300 dpi: "80.0"
*ColorSepScreenFreq ProcessCyan.80lpi.300dpi/80 lpi / 300 dpi: "80.0"
*ColorSepScreenFreq ProcessMagenta.80lpi.300dpi/80 lpi / 300 dpi: "80.0"
*ColorSepScreenFreq ProcessYellow.80lpi.300dpi/80 lpi / 300 dpi: "80.0"
*% For 60 lpi / 300 dpi ================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "68.0"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "68.0"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "68.0"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "68.0"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "68.0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60.0"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60.0"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60.0"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60.0"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60.0"
*% Produced by "bldppd42.ps" version 4.0 edit 11
*% Edited by Debbie Aubrey
*% Last Edit Date: Jun 28 1993
*% The byte count of this file should be exactly 013881 or 014312
*% depending on the filesystem it resides in.
*% end of PPD file for Phaser 200i