Info: 'Save changes to the ^2 document "^0" before ^1?'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_132.txt
Items: (4 entries)
0:
Bounds: x1=288, y1=72, x2=351, y2=92
Type: 4
Info: 'Revert'
1:
Bounds: x1=192, y1=72, x2=255, y2=92
Type: 4
Info: 'Cancel'
2:
Bounds: x1=65, y1=13, x2=311, y2=62
Type: -120
Info: 'Revert to the last saved version of "^0"?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_133.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=110, x2=272, y2=128
Type: 4
Info: 'OK'
1:
Bounds: x1=112, y1=108, x2=186, y2=126
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=272, y2=105
Type: -120
Info: 'The disk copy of "^0" was changed since you last opened or saved it. Do you want to ^1 anyway?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_134.txt
Items: (4 entries)
0:
Bounds: x1=192, y1=136, x2=266, y2=156
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=136, x2=154, y2=156
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=278, y2=116
Type: -120
Info: 'There is not enough disk space to save "^0". Free some space and try again.'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_135.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=70, x2=272, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=65
Type: -120
Info: '"^0" is already open.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_136.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=70, x2=272, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=65
Type: -120
Info: 'Memory space is getting low. Some commands may be disabled.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_137.txt
Items: (3 entries)
0:
Bounds: x1=213, y1=120, x2=272, y2=138
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=115
Type: -120
Info: 'Your computer lacks the required hardware or system software to run this application.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_138.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=80, x2=272, y2=98
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=80, x2=94, y2=98
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=272, y2=75
Type: -120
Info: '"^0" can't be opened for writing. Do you want to open it anyway?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_139.txt
Items: (4 entries)
0:
Bounds: x1=303, y1=74, x2=362, y2=94
Type: 4
Info: 'Save'
1:
Bounds: x1=33, y1=74, x2=92, y2=94
Type: 4
Info: 'Cancel'
2:
Bounds: x1=106, y1=74, x2=191, y2=94
Type: 4
Info: 'Replace'
3:
Bounds: x1=20, y1=8, x2=195, y2=62
Type: -120
Info: 'Replace Existing "^0" ?'
DITL_143.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=80, x2=272, y2=98
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=75
Type: -120
Info: 'This version has expired. The expiration date is ^1 ^0, ^2.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_150.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=82, x2=272, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=77
Type: -120
Info: 'Cannot add any more characters here.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_151.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=82, x2=272, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=77
Type: -120
Info: 'Cannot remember the styles associated with the text. The text is intact, however.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_180.txt
Items: (8 entries)
0:
Bounds: x1=282, y1=144, x2=356, y2=162
Type: 4
Info: 'OK'
1:
Bounds: x1=169, y1=12, x2=371, y2=48
Type: -120
Info: '^0.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=80, y1=12, x2=170, y2=28
Type: -120
Info: 'Error :'
4:
Bounds: x1=80, y1=52, x2=170, y2=68
Type: -120
Info: 'In :'
5:
Bounds: x1=169, y1=52, x2=371, y2=88
Type: -120
Info: '^2.'
6:
Bounds: x1=169, y1=92, x2=371, y2=128
Type: -120
Info: '^1.'
7:
Bounds: x1=80, y1=92, x2=170, y2=108
Type: -120
Info: 'Suggestion :'
DITL_181.txt
Items: (6 entries)
0:
Bounds: x1=280, y1=100, x2=354, y2=118
Type: 4
Info: 'OK'
1:
Bounds: x1=130, y1=12, x2=370, y2=48
Type: -120
Info: '^0.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=80, y1=12, x2=130, y2=28
Type: -120
Info: 'Error :'
4:
Bounds: x1=80, y1=52, x2=130, y2=68
Type: -120
Info: 'In :'
5:
Bounds: x1=130, y1=52, x2=370, y2=92
Type: -120
Info: '^2.'
DITL_182.txt
Items: (4 entries)
0:
Bounds: x1=287, y1=69, x2=361, y2=87
Type: 4
Info: 'OK'
1:
Bounds: x1=155, y1=12, x2=377, y2=58
Type: -120
Info: '^2.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=80, y1=12, x2=145, y2=28
Type: -120
Info: 'Error in :'
DITL_183.txt
Items: (3 entries)
0:
Bounds: x1=233, y1=15, x2=307, y2=33
Type: 4
Info: 'OK'
1:
Bounds: x1=76, y1=16, x2=210, y2=35
Type: -120
Info: 'Program Error.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_184.txt
Items: (6 entries)
0:
Bounds: x1=282, y1=108, x2=356, y2=126
Type: 4
Info: 'OK'
1:
Bounds: x1=172, y1=56, x2=356, y2=92
Type: -120
Info: '^1.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=80, y1=56, x2=170, y2=72
Type: -120
Info: 'Suggestion :'
4:
Bounds: x1=80, y1=16, x2=170, y2=32
Type: -120
Info: 'Error :'
5:
Bounds: x1=172, y1=16, x2=356, y2=52
Type: -120
Info: '^0.'
DITL_185.txt
Items: (4 entries)
0:
Bounds: x1=282, y1=56, x2=356, y2=74
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=80, y1=12, x2=128, y2=28
Type: -120
Info: 'Error :'
3:
Bounds: x1=128, y1=12, x2=360, y2=48
Type: -120
Info: '^0.'
DITL_187.txt
Items: (3 entries)
0:
Bounds: x1=288, y1=96, x2=362, y2=114
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=68, y1=16, x2=364, y2=84
Type: -120
Info: '^0.'
DITL_231.txt
Items: (5 entries)
0:
Bounds: x1=43, y1=66, x2=123, y2=86
Type: 4
Info: '&Yes'
1:
Bounds: x1=264, y1=66, x2=344, y2=86
Type: 4
Info: 'Cancel'
2:
Bounds: x1=154, y1=66, x2=234, y2=86
Type: 4
Info: '&No'
3:
Bounds: x1=65, y1=10, x2=363, y2=59
Type: -120
Info: 'Do you want to save changes to document "^0" before ^1?'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_300.txt
Items: (5 entries)
0:
Bounds: x1=285, y1=84, x2=365, y2=104
Type: 4
Info: 'OK'
1:
Bounds: x1=148, y1=12, x2=356, y2=44
Type: -120
Info: '^0'
2:
Bounds: x1=16, y1=10, x2=48, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=148, y1=48, x2=352, y2=68
Type: -120
Info: 'Substituting previous value.'
4:
Bounds: x1=60, y1=12, x2=120, y2=32
Type: -120
Info: 'Warning:'
DITL_1000.txt
Items: (3 entries)
0:
Bounds: x1=288, y1=134, x2=358, y2=154
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=10, x2=381, y2=120
Type: -120
Info: 'Your computer lacks the required hardware or system software to run this application.
You need at least:
Ñ A color capable Macintosh with a 68020 CPU
Ñ System 7'
2:
Bounds: x1=9, y1=10, x2=41, y2=42
Type: -96
Info: ' '
DITL_1002.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=80, x2=322, y2=100
Type: 4
Info: 'Quit'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=332, y2=74
Type: -120
Info: 'Could not launch the application because some required Extensions could not be found. Make sure your copy of COREL Dream3D is properly installed.'
DITL_1003.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=80, x2=322, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=333, y2=69
Type: -120
Info: 'The extension "^0" could not be used because it is too old. You need to upgrade it.'
DITL_1004.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=104, x2=322, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=337, y2=92
Type: -120
Info: 'The extension "^0" could not be used because it is too new. You need to upgrade your copy of COREL Dream3D. Please contact Corel Technical Support.'
DITL_1005.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=104, x2=322, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=337, y2=92
Type: -120
Info: 'The "RDDEngineLib4" shared library is missing. Please make sure this file is in your Extensions folder.'
DITL_1006.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=80, x2=322, y2=100
Type: 4
Info: 'Quit'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=332, y2=74
Type: -120
Info: 'Could not launch the application because none of the plugins could be found. Make sure your copy of COREL Dream3D is properly installed.'
DITL_1007.txt
Items: (5 entries)
0:
Bounds: x1=315, y1=201, x2=385, y2=221
Type: 4
Info: 'OK'
1:
Bounds: x1=54, y1=10, x2=416, y2=44
Type: -120
Info: 'Not enough memory left to system to launch ^0.
'
2:
Bounds: x1=9, y1=10, x2=41, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=54, y1=43, x2=416, y2=107
Type: -120
Info: 'You can either:
Ñ Quit other applications.
Ñ Decrease memory allocated to ^0 .'
4:
Bounds: x1=82, y1=107, x2=384, y2=197
Type: -120
Info: 'To do this, In the Finder, Click on the ^0 program icon, select "Get Info" in the "File" menu, and decrease the Preferred Size amount ( or Current Size in systems prior to 7.1 ). '
DITL_1401.txt
Items: (3 entries)
0:
Bounds: x1=260, y1=90, x2=320, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=8, x2=340, y2=80
Type: -120
Info: 'Sorry, a problem occured while writing the Registration Informations. Please check if your copy is "locked" or if its volume is write-protected.'
2:
Bounds: x1=15, y1=9, x2=47, y2=41
Type: -96
Info: ' '
DITL_1402.txt
Items: (3 entries)
0:
Bounds: x1=244, y1=76, x2=314, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=10, x2=332, y2=64
Type: -120
Info: 'This appears to be an incorrect or invalid serial number. Please enter your serial number again.'
2:
Bounds: x1=11, y1=16, x2=43, y2=48
Type: -96
Info: ' '
DITL_1403.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=80, x2=322, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=333, y2=69
Type: -120
Info: 'The presence of "xxxr" has been detected. You will have to enter a "xxx" serial number in order to use it.'
DITL_1404.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=89, x2=322, y2=109
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=6, x2=333, y2=88
Type: -120
Info: 'The serial number you are using is a "xxx" serial number but "xxx" cannot be found.
"xxx" will be launched but animation features will not be available.'
DITL_1405.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=80, x2=322, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=333, y2=69
Type: -120
Info: 'A "XXXX" serial number is needed to run when "XXX" is installed.'
DITL_1550.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=112, x2=322, y2=132
Type: 4
Info: 'Cancel'
1:
Bounds: x1=168, y1=112, x2=240, y2=132
Type: 4
Info: 'Proceed'
2:
Bounds: x1=8, y1=8, x2=329, y2=93
Type: -120
Info: 'This text contains multiple font attributes. It obviously was not created with this version of the program. If you proceed, only the first set of attributes will be used, and the other ones will be lost.'
DITL_1551.txt
Items: (3 entries)
0:
Bounds: x1=256, y1=80, x2=314, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=340, y2=69
Type: -120
Info: 'The number of characters in the text is limited to ^0. Only the first ^0 characters will be kept.'
DITL_3800.txt
Items: (9 entries)
0:
Bounds: x1=354, y1=296, x2=417, y2=313
Type: -128
Info: ''
1:
Bounds: x1=357, y1=355, x2=423, y2=371
Type: -120
Info: '^3'
2:
Bounds: x1=8, y1=305, x2=223, y2=321
Type: -120
Info: '^0'
3:
Bounds: x1=8, y1=319, x2=223, y2=335
Type: -120
Info: '^1'
4:
Bounds: x1=8, y1=333, x2=223, y2=349
Type: -120
Info: '^2'
5:
Bounds: x1=8, y1=290, x2=260, y2=306
Type: -120
Info: 'This copy is registered to:'
6:
Bounds: x1=8, y1=225, x2=423, y2=288
Type: -120
Info: 'Copyright ⌐ Corel Corporation 1995-1996. All rights reserved.
Copyright ⌐1990-1995 Ray Dream, Inc.
Kodak Digital Science ICC API copyright ⌐ 1995-1996 Eastman Kodak Company.
3D Models provided by Viewpoint Datalabs International '
7:
Bounds: x1=6, y1=355, x2=241, y2=371
Type: -120
Info: ''
8:
Bounds: x1=0, y1=0, x2=423, y2=227
Type: -64
Info: '╪'
DITL_3801.txt
Items: (9 entries)
0:
Bounds: x1=355, y1=305, x2=417, y2=322
Type: -128
Info: ''
1:
Bounds: x1=361, y1=358, x2=420, y2=374
Type: -120
Info: '^3'
2:
Bounds: x1=8, y1=313, x2=223, y2=329
Type: -120
Info: '^0'
3:
Bounds: x1=8, y1=327, x2=223, y2=343
Type: -120
Info: '^1'
4:
Bounds: x1=8, y1=341, x2=223, y2=357
Type: -120
Info: '^2'
5:
Bounds: x1=8, y1=298, x2=260, y2=314
Type: -120
Info: 'This copy is registered to:'
6:
Bounds: x1=7, y1=228, x2=420, y2=295
Type: -120
Info: 'Copyright ⌐ Corel Corporation 1995-1996. All rights reserved.
Copyright ⌐1990-1995 Ray Dream, Inc.
Kodak Digital Science ICC API copyright ⌐ 1995-1996 Eastman Kodak Company.
3D Models provided by Viewpoint Datalabs International '
7:
Bounds: x1=7, y1=360, x2=242, y2=376
Type: -120
Info: ''
8:
Bounds: x1=0, y1=0, x2=423, y2=227
Type: -64
Info: '╪'
DITL_3802.txt
Items: (12 entries)
0:
Bounds: x1=216, y1=296, x2=276, y2=316
Type: 4
Info: 'OK'
1:
Bounds: x1=104, y1=40, x2=192, y2=56
Type: -120
Info: 'Version ^3'
2:
Bounds: x1=28, y1=204, x2=244, y2=220
Type: -120
Info: '^0'
3:
Bounds: x1=28, y1=224, x2=244, y2=240
Type: -120
Info: '^1'
4:
Bounds: x1=28, y1=268, x2=244, y2=284
Type: -120
Info: '^2'
5:
Bounds: x1=27, y1=65, x2=295, y2=168
Type: -120
Info: 'Copyright ⌐ Corel Corporation 1988-1995.
All rights reserved.
Ray Dream Designer
copyright ⌐1990-1995 Ray Dream, Inc.
'
6:
Bounds: x1=100, y1=16, x2=212, y2=32
Type: -120
Info: 'CorelDREAM 3D'
7:
Bounds: x1=28, y1=180, x2=208, y2=196
Type: -120
Info: 'This copy is registered to:'
8:
Bounds: x1=28, y1=248, x2=208, y2=264
Type: -120
Info: 'Serial Number:'
9:
Bounds: x1=28, y1=180, x2=208, y2=196
Type: -120
Info: 'This copy is registered to:'
10:
Bounds: x1=36, y1=20, x2=68, y2=52
Type: -64
Info: ''
11:
Bounds: x1=234, y1=20, x2=266, y2=52
Type: -64
Info: ' '
DITL_3803.txt
Items: (12 entries)
0:
Bounds: x1=216, y1=296, x2=276, y2=316
Type: 4
Info: 'OK'
1:
Bounds: x1=104, y1=40, x2=192, y2=56
Type: -120
Info: 'Version ^3'
2:
Bounds: x1=28, y1=204, x2=244, y2=220
Type: -120
Info: '^0'
3:
Bounds: x1=28, y1=224, x2=244, y2=240
Type: -120
Info: '^1'
4:
Bounds: x1=28, y1=268, x2=244, y2=284
Type: -120
Info: '^2'
5:
Bounds: x1=28, y1=64, x2=296, y2=144
Type: -120
Info: 'Copyright ⌐ Corel Corporation 1988-1995.
All rights reserved.
Ray Dream Designer
copyright ⌐1990-1995 Ray Dream, Inc.
'
6:
Bounds: x1=100, y1=16, x2=212, y2=32
Type: -120
Info: 'CorelDREAM 3D'
7:
Bounds: x1=28, y1=180, x2=208, y2=196
Type: -120
Info: 'This copy is registered to:'
8:
Bounds: x1=28, y1=248, x2=208, y2=264
Type: -120
Info: 'Serial Number:'
9:
Bounds: x1=28, y1=180, x2=208, y2=196
Type: -120
Info: 'This copy is registered to:'
10:
Bounds: x1=36, y1=20, x2=68, y2=52
Type: -64
Info: ''
11:
Bounds: x1=234, y1=20, x2=266, y2=52
Type: -64
Info: ' '
DITL_3810.txt
Items: (0 entries)
DITL_4011.txt
Items: (20 entries)
0:
Bounds: x1=205, y1=140, x2=285, y2=158
Type: 4
Info: 'Open'
1:
Bounds: x1=609, y1=2, x2=627, y2=82
Type: 4
Info: 'Hidden'
2:
Bounds: x1=205, y1=230, x2=285, y2=248
Type: 4
Info: 'Cancel'
3:
Bounds: x1=187, y1=43, x2=302, y2=63
Type: -128
Info: ''
4:
Bounds: x1=205, y1=71, x2=285, y2=89
Type: 4
Info: 'Eject'
5:
Bounds: x1=205, y1=97, x2=285, y2=115
Type: 4
Info: 'Drive'
6:
Bounds: x1=4, y1=43, x2=191, y2=188
Type: 0
Info: ''
7:
Bounds: x1=174, y1=43, x2=191, y2=188
Type: 0
Info: ''
8:
Bounds: x1=200, y1=129, x2=290, y2=130
Type: -128
Info: ''
9:
Bounds: x1=200, y1=8, x2=635, y2=30
Type: -120
Info: '^0'
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -120
Info: 'buf1'
11:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -120
Info: 'buf2'
12:
Bounds: x1=205, y1=170, x2=285, y2=188
Type: 4
Info: 'Add'
13:
Bounds: x1=45, y1=218, x2=125, y2=236
Type: 4
Info: 'Add All'
14:
Bounds: x1=300, y1=43, x2=486, y2=188
Type: 0
Info: ''
15:
Bounds: x1=469, y1=43, x2=486, y2=188
Type: 0
Info: ''
16:
Bounds: x1=350, y1=230, x2=430, y2=248
Type: 4
Info: 'Remove'
17:
Bounds: x1=205, y1=200, x2=285, y2=219
Type: 4
Info: 'Done'
18:
Bounds: x1=16392, y1=197, x2=16460, y2=217
Type: -120
Info: 'File type:'
19:
Bounds: x1=76, y1=197, x2=191, y2=217
Type: 8
Info: ''
DITL_6010.txt
Items: (3 entries)
0:
Bounds: x1=187, y1=72, x2=245, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=18, y1=10, x2=50, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=6, x2=243, y2=63
Type: -120
Info: 'You need to validate the options dialog'
DITL_6301.txt
Items: (3 entries)
0:
Bounds: x1=232, y1=58, x2=290, y2=78
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=19, x2=312, y2=37
Type: -120
Info: 'An error occured with the Plug-In.'
2:
Bounds: x1=13, y1=19, x2=45, y2=51
Type: -96
Info: ' '
DITL_6302.txt
Items: (4 entries)
0:
Bounds: x1=256, y1=72, x2=314, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=176, y1=72, x2=234, y2=92
Type: 4
Info: 'Cancel'
2:
Bounds: x1=48, y1=8, x2=318, y2=58
Type: -120
Info: 'Having neither a prefix nor a suffix means saving your enhanced image over your original image.'
3:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
DITL_6303.txt
Items: (4 entries)
0:
Bounds: x1=319, y1=101, x2=377, y2=121
Type: 4
Info: 'OK'
1:
Bounds: x1=50, y1=12, x2=377, y2=47
Type: -120
Info: 'This document cannot be closed because it is still being processed. '
2:
Bounds: x1=8, y1=15, x2=40, y2=47
Type: -96
Info: ' '
3:
Bounds: x1=50, y1=51, x2=376, y2=89
Type: -120
Info: '@MTo cancel the current operation, type Command-period after closing this alert.@WTo cancel the current operation, press Escape after closing this message.'
DITL_6304.txt
Items: (4 entries)
0:
Bounds: x1=315, y1=64, x2=373, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=225, y1=64, x2=283, y2=84
Type: 4
Info: 'Cancel'
2:
Bounds: x1=47, y1=16, x2=424, y2=51
Type: -120
Info: 'Some of the documents are still being processed.
Do you really want to Quit ?'
3:
Bounds: x1=8, y1=15, x2=40, y2=47
Type: -96
Info: ' '
DITL_6305.txt
Items: (3 entries)
0:
Bounds: x1=340, y1=64, x2=398, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=47, y1=16, x2=424, y2=51
Type: -120
Info: 'You cannot close this window. You can use the Abort Button in the batch queue to abort the processing.'
2:
Bounds: x1=8, y1=15, x2=40, y2=47
Type: -96
Info: ' '
DITL_6306.txt
Items: (3 entries)
0:
Bounds: x1=8, y1=20, x2=40, y2=52
Type: -96
Info: ' '
1:
Bounds: x1=80, y1=27, x2=291, y2=52
Type: -120
Info: 'This image is too large'
2:
Bounds: x1=221, y1=65, x2=279, y2=85
Type: 4
Info: 'OK'
DITL_6600.txt
Items: (11 entries)
0:
Bounds: x1=256, y1=138, x2=336, y2=156
Type: 4
Info: 'Open'
1:
Bounds: x1=59, y1=1152, x2=77, y2=1232
Type: 4
Info: ''
2:
Bounds: x1=256, y1=163, x2=336, y2=181
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=39, x2=347, y2=59
Type: -128
Info: ''
4:
Bounds: x1=256, y1=68, x2=336, y2=86
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=93, x2=336, y2=111
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=39, x2=230, y2=185
Type: 0
Info: ''
7:
Bounds: x1=229, y1=39, x2=246, y2=185
Type: 0
Info: ''
8:
Bounds: x1=252, y1=124, x2=340, y2=125
Type: -128
Info: ''
9:
Bounds: x1=20, y1=1044, x2=116, y2=1145
Type: -120
Info: ''
10:
Bounds: x1=30, y1=192, x2=210, y2=212
Type: 0
Info: ''
DITL_6601.txt
Items: (10 entries)
0:
Bounds: x1=218, y1=132, x2=288, y2=150
Type: 4
Info: 'Save'
1:
Bounds: x1=218, y1=158, x2=288, y2=176
Type: 4
Info: 'Cancel'
2:
Bounds: x1=14, y1=136, x2=197, y2=152
Type: -120
Info: 'Save as:'
3:
Bounds: x1=198, y1=29, x2=302, y2=49
Type: -128
Info: ''
4:
Bounds: x1=218, y1=56, x2=288, y2=74
Type: 4
Info: 'Eject'
5:
Bounds: x1=218, y1=82, x2=288, y2=100
Type: 4
Info: 'Drive'
6:
Bounds: x1=17, y1=157, x2=194, y2=173
Type: 16
Info: ''
7:
Bounds: x1=14, y1=29, x2=197, y2=127
Type: -128
Info: ''
8:
Bounds: x1=14, y1=180, x2=197, y2=199
Type: 0
Info: ''
9:
Bounds: x1=218, y1=180, x2=288, y2=198
Type: 4
Info: 'Options╔'
DITL_6602.txt
Items: (16 entries)
0:
Bounds: x1=362, y1=135, x2=442, y2=153
Type: 4
Info: 'Open'
1:
Bounds: x1=165, y1=1149, x2=183, y2=1229
Type: 4
Info: ''
2:
Bounds: x1=362, y1=160, x2=442, y2=178
Type: 4
Info: 'Cancel'
3:
Bounds: x1=338, y1=36, x2=453, y2=56
Type: -128
Info: ''
4:
Bounds: x1=362, y1=65, x2=442, y2=83
Type: 4
Info: 'Eject'
5:
Bounds: x1=362, y1=90, x2=442, y2=108
Type: 4
Info: 'Drive'
6:
Bounds: x1=118, y1=36, x2=336, y2=182
Type: 0
Info: ''
7:
Bounds: x1=335, y1=36, x2=352, y2=182
Type: 0
Info: ''
8:
Bounds: x1=358, y1=121, x2=446, y2=122
Type: -128
Info: ''
9:
Bounds: x1=126, y1=1041, x2=222, y2=1142
Type: -120
Info: ''
10:
Bounds: x1=5, y1=56, x2=105, y2=156
Type: 0
Info: ''
11:
Bounds: x1=27, y1=36, x2=84, y2=52
Type: -120
Info: 'Preview'
12:
Bounds: x1=109, y1=35, x2=110, y2=182
Type: -128
Info: ''
13:
Bounds: x1=15, y1=164, x2=95, y2=182
Type: 4
Info: 'Create'
14:
Bounds: x1=136, y1=217, x2=250, y2=235
Type: 5
Info: 'Show Preview'
15:
Bounds: x1=136, y1=192, x2=326, y2=212
Type: 0
Info: ''
DITL_6610.txt
Items: (10 entries)
0:
Bounds: x1=252, y1=135, x2=332, y2=155
Type: 4
Info: 'Open'
1:
Bounds: x1=252, y1=104, x2=332, y2=124
Type: 4
Info: 'Cancel'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -128
Info: ' Φf'
3:
Bounds: x1=235, y1=8, x2=337, y2=24
Type: 0
Info: ''
4:
Bounds: x1=252, y1=32, x2=332, y2=52
Type: 4
Info: 'Eject'
5:
Bounds: x1=252, y1=60, x2=332, y2=80
Type: 4
Info: 'Desktop'
6:
Bounds: x1=12, y1=29, x2=230, y2=159
Type: 0
Info: ''
7:
Bounds: x1=12, y1=6, x2=230, y2=25
Type: 0
Info: ''
8:
Bounds: x1=251, y1=91, x2=333, y2=92
Type: -64
Info: ' '
9:
Bounds: x1=12, y1=164, x2=232, y2=188
Type: 0
Info: ''
DITL_6611.txt
Items: (14 entries)
0:
Bounds: x1=252, y1=161, x2=332, y2=181
Type: 4
Info: 'Save'
1:
Bounds: x1=252, y1=130, x2=332, y2=150
Type: 4
Info: 'Cancel'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -128
Info: ' Φe'
3:
Bounds: x1=235, y1=8, x2=337, y2=24
Type: 0
Info: ''
4:
Bounds: x1=252, y1=32, x2=332, y2=52
Type: 4
Info: 'Eject'
5:
Bounds: x1=252, y1=60, x2=332, y2=80
Type: 4
Info: 'Desktop'
6:
Bounds: x1=12, y1=29, x2=230, y2=127
Type: 0
Info: ''
7:
Bounds: x1=12, y1=6, x2=230, y2=25
Type: 0
Info: ''
8:
Bounds: x1=250, y1=119, x2=334, y2=120
Type: -64
Info: ' '
9:
Bounds: x1=15, y1=157, x2=227, y2=173
Type: 16
Info: ''
10:
Bounds: x1=15, y1=136, x2=227, y2=152
Type: -120
Info: 'Save as:'
11:
Bounds: x1=252, y1=88, x2=332, y2=108
Type: -128
Info: ''
12:
Bounds: x1=12, y1=184, x2=230, y2=208
Type: 0
Info: ''
13:
Bounds: x1=252, y1=186, x2=332, y2=206
Type: 4
Info: 'Options╔'
DITL_6612.txt
Items: (16 entries)
0:
Bounds: x1=355, y1=135, x2=435, y2=155
Type: 4
Info: 'Open'
1:
Bounds: x1=355, y1=104, x2=435, y2=124
Type: 4
Info: 'Cancel'
2:
Bounds: x1=-13, y1=0, x2=-13, y2=0
Type: -128
Info: ' Φf'
3:
Bounds: x1=340, y1=8, x2=442, y2=24
Type: 0
Info: ''
4:
Bounds: x1=355, y1=32, x2=435, y2=52
Type: 4
Info: 'Eject'
5:
Bounds: x1=355, y1=60, x2=435, y2=80
Type: 4
Info: 'Desktop'
6:
Bounds: x1=118, y1=29, x2=336, y2=159
Type: 0
Info: ''
7:
Bounds: x1=118, y1=6, x2=336, y2=25
Type: 0
Info: ''
8:
Bounds: x1=354, y1=91, x2=436, y2=92
Type: -64
Info: 'ù'
9:
Bounds: x1=122, y1=1043, x2=218, y2=1144
Type: -120
Info: ''
10:
Bounds: x1=5, y1=39, x2=105, y2=139
Type: 0
Info: ''
11:
Bounds: x1=27, y1=18, x2=84, y2=34
Type: -120
Info: 'Preview'
12:
Bounds: x1=110, y1=29, x2=111, y2=164
Type: -128
Info: ''
13:
Bounds: x1=15, y1=143, x2=95, y2=163
Type: 4
Info: 'Create'
14:
Bounds: x1=118, y1=192, x2=235, y2=212
Type: 5
Info: 'Show Preview'
15:
Bounds: x1=118, y1=164, x2=338, y2=188
Type: 0
Info: ''
DITL_6700.txt
Items: (12 entries)
0:
Bounds: x1=256, y1=123, x2=336, y2=141
Type: 4
Info: 'Open'
1:
Bounds: x1=59, y1=1133, x2=77, y2=1213
Type: 4
Info: 'Hidden'
2:
Bounds: x1=256, y1=174, x2=336, y2=192
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=24, x2=347, y2=44
Type: -128
Info: ''
4:
Bounds: x1=256, y1=53, x2=336, y2=71
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=78, x2=336, y2=96
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=24, x2=230, y2=170
Type: 0
Info: ''
7:
Bounds: x1=229, y1=24, x2=246, y2=170
Type: 0
Info: ''
8:
Bounds: x1=252, y1=109, x2=340, y2=110
Type: -128
Info: ''
9:
Bounds: x1=20, y1=1025, x2=116, y2=1126
Type: -120
Info: ''
10:
Bounds: x1=256, y1=148, x2=336, y2=166
Type: 4
Info: 'Directory'
11:
Bounds: x1=29, y1=174, x2=214, y2=193
Type: 4
Info: 'Select Current Directory'
DITL_6701.txt
Items: (13 entries)
0:
Bounds: x1=256, y1=139, x2=336, y2=157
Type: 4
Info: 'Open'
1:
Bounds: x1=59, y1=1133, x2=77, y2=1213
Type: 4
Info: 'Hidden'
2:
Bounds: x1=256, y1=190, x2=336, y2=208
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=24, x2=347, y2=44
Type: -128
Info: ''
4:
Bounds: x1=256, y1=53, x2=336, y2=71
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=78, x2=336, y2=96
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=24, x2=230, y2=186
Type: 0
Info: ''
7:
Bounds: x1=229, y1=24, x2=246, y2=186
Type: 0
Info: ''
8:
Bounds: x1=252, y1=125, x2=340, y2=126
Type: -128
Info: ''
9:
Bounds: x1=20, y1=1025, x2=116, y2=1126
Type: -120
Info: ''
10:
Bounds: x1=256, y1=164, x2=336, y2=182
Type: 4
Info: 'Directory'
11:
Bounds: x1=29, y1=190, x2=214, y2=209
Type: 4
Info: 'Select Current Directory'
12:
Bounds: x1=256, y1=102, x2=336, y2=120
Type: 4
Info: 'New'
DITL_6702.txt
Items: (5 entries)
0:
Bounds: x1=130, y1=61, x2=190, y2=81
Type: 4
Info: 'Create'
1:
Bounds: x1=10, y1=61, x2=70, y2=81
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=33, x2=189, y2=49
Type: -112
Info: 'untitled folder'
3:
Bounds: x1=10, y1=8, x2=178, y2=28
Type: -120
Info: 'Name of new folder:'
4:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' Φb'
DITL_6703.txt
Items: (3 entries)
0:
Bounds: x1=120, y1=50, x2=190, y2=70
Type: 4
Info: 'Replace'
1:
Bounds: x1=10, y1=50, x2=80, y2=70
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=190, y2=40
Type: -120
Info: 'Replace existing ╥^0╙ ?'
DITL_7011.txt
Items: (21 entries)
0:
Bounds: x1=205, y1=140, x2=285, y2=158
Type: 4
Info: 'Open'
1:
Bounds: x1=205, y1=230, x2=285, y2=248
Type: 4
Info: 'Cancel'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' Φf'
3:
Bounds: x1=195, y1=43, x2=296, y2=62
Type: 0
Info: ''
4:
Bounds: x1=205, y1=71, x2=285, y2=89
Type: 4
Info: 'Eject'
5:
Bounds: x1=205, y1=98, x2=285, y2=118
Type: 4
Info: 'Desktop'
6:
Bounds: x1=4, y1=43, x2=191, y2=188
Type: 0
Info: ''
7:
Bounds: x1=4, y1=20, x2=191, y2=39
Type: 0
Info: ''
8:
Bounds: x1=204, y1=127, x2=286, y2=128
Type: -64
Info: ' '
9:
Bounds: x1=172, y1=0, x2=318, y2=18
Type: 8
Info: '^0'
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -120
Info: 'buf1'
11:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -120
Info: 'buf2'
12:
Bounds: x1=205, y1=170, x2=285, y2=188
Type: 4
Info: 'Add'
13:
Bounds: x1=45, y1=230, x2=125, y2=248
Type: 4
Info: 'Add All'
14:
Bounds: x1=300, y1=43, x2=486, y2=188
Type: 0
Info: ''
15:
Bounds: x1=469, y1=43, x2=486, y2=188
Type: 0
Info: ''
16:
Bounds: x1=350, y1=230, x2=430, y2=248
Type: 4
Info: 'Remove'
17:
Bounds: x1=205, y1=200, x2=285, y2=219
Type: 4
Info: 'Done'
18:
Bounds: x1=8, y1=197, x2=76, y2=217
Type: -120
Info: 'File type:'
19:
Bounds: x1=76, y1=197, x2=191, y2=217
Type: 8
Info: ''
20:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' å'
DITL_9300.txt
Items: (3 entries)
0:
Bounds: x1=224, y1=96, x2=282, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=48, y1=8, x2=291, y2=90
Type: -120
Info: 'The command can not be completed because the selection contains the camera "^0" which is used by another window.'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
DITL_9301.txt
Items: (3 entries)
0:
Bounds: x1=207, y1=64, x2=265, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=63, y1=12, x2=265, y2=55
Type: -120
Info: 'This name is already in use.'
2:
Bounds: x1=16, y1=12, x2=48, y2=44
Type: -96
Info: ' '
DITL_9302.txt
Items: (3 entries)
0:
Bounds: x1=232, y1=112, x2=290, y2=132
Type: 4
Info: 'OK'
1:
Bounds: x1=63, y1=12, x2=299, y2=102
Type: -120
Info: 'The command can not be completed because the selection contains the scene instance "^0" which is used in a link.'
2:
Bounds: x1=16, y1=12, x2=48, y2=44
Type: -96
Info: ' '
DITL_9303.txt
Items: (3 entries)
0:
Bounds: x1=273, y1=90, x2=331, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=63, y1=12, x2=351, y2=85
Type: -120
Info: 'Cannot group objects, because one or more selected objects do not belong in the same hierarchy level, or do not belong to the same group.'
2:
Bounds: x1=16, y1=12, x2=48, y2=44
Type: -96
Info: ' '
DITL_9304.txt
Items: (3 entries)
0:
Bounds: x1=224, y1=96, x2=282, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=48, y1=8, x2=291, y2=82
Type: -120
Info: 'The command can not be completed because the selection contains the camera "^0" that is in use.'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
DITL_9305.txt
Items: (3 entries)
0:
Bounds: x1=224, y1=96, x2=282, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=48, y1=8, x2=291, y2=90
Type: -120
Info: 'The command can not be completed because the selection contains the object "^0" which is used by another window.'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
DITL_9400.txt
Items: (3 entries)
0:
Bounds: x1=229, y1=104, x2=287, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=18, y1=14, x2=50, y2=46
Type: -96
Info: ' '
2:
Bounds: x1=57, y1=13, x2=286, y2=92
Type: -120
Info: 'The name of the rendering camera is used more than once. It may not render from the camera you expect.'
DITL_9500.txt
Items: (3 entries)
0:
Bounds: x1=224, y1=72, x2=282, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=298, y2=61
Type: -120
Info: 'You cannot move several paths at the same time in this plane. Please select and move them one at a time.'
DITL_9501.txt
Items: (3 entries)
0:
Bounds: x1=328, y1=88, x2=386, y2=108
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=391, y2=76
Type: -120
Info: 'You cannot move multiple points on the envelope when editing a Pipeline object.
Please select and move one point at a time.'
DITL_9502.txt
Items: (3 entries)
0:
Bounds: x1=288, y1=72, x2=346, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=363, y2=61
Type: -120
Info: 'Sorry, the main Modeling Wizard file could not be found. Make sure your Modeling Wizard files are correctly installed.'
DITL_9503.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=88, x2=322, y2=108
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=330, y2=77
Type: -120
Info: 'The Pen tool cannot be used on a closed Sweep Path.
Use the Add Point tool to add points to the Sweep Path.'
DITL_9504.txt
Items: (4 entries)
0:
Bounds: x1=130, y1=70, x2=188, y2=90
Type: 4
Info: 'OK'
1:
Bounds: x1=217, y1=70, x2=275, y2=90
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=48, y1=8, x2=312, y2=60
Type: -120
Info: 'This command makes changes that cannot be undone. Modifications made to your object will be lost.'
DITL_9505.txt
Items: (3 entries)
0:
Bounds: x1=312, y1=104, x2=370, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=384, y2=92
Type: -120
Info: 'Cannot complete your request, because there are no TrueType or Type 1 fonts available.
For Type 1 fonts support, make sure that Adobe Type Manager is on.'
DITL_9506.txt
Items: (3 entries)
0:
Bounds: x1=280, y1=72, x2=338, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=347, y2=62
Type: -120
Info: 'This tool can be used on Cross-Sections only. It cannot be used on a Sweep Path.'
DITL_9507.txt
Items: (3 entries)
0:
Bounds: x1=280, y1=72, x2=338, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=347, y2=62
Type: -120
Info: 'This command can be used on Cross-Sections only. It cannot be used on a Sweep Path.'
DITL_9508.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=82, x2=322, y2=102
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=339, y2=74
Type: -120
Info: 'The Modeling Box size is too small for this object. Either scale the object with the Modeling Box or enter a new size.'
DITL_9509.txt
Items: (3 entries)
0:
Bounds: x1=272, y1=72, x2=330, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=338, y2=60
Type: -120
Info: 'The grid line spacing set in Grid is too small for the new Modeling Box size. It will be automatically ajusted.'
DITL_9510.txt
Items: (3 entries)
0:
Bounds: x1=296, y1=72, x2=354, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=362, y2=60
Type: -120
Info: 'This point cannot be deleted because it would remove the last Cross Section of the object.'
DITL_9511.txt
Items: (3 entries)
0:
Bounds: x1=288, y1=64, x2=346, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=357, y2=58
Type: -120
Info: 'You cannot delete more points on the Sweep Path, because it needs at least two points.'
DITL_9512.txt
Items: (4 entries)
0:
Bounds: x1=139, y1=57, x2=197, y2=77
Type: 4
Info: 'OK'
1:
Bounds: x1=230, y1=57, x2=288, y2=77
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=48, y1=8, x2=328, y2=47
Type: -120
Info: 'Turning the Envelope off will lose all modifications you may have done to it.'
DITL_9513.txt
Items: (4 entries)
0:
Bounds: x1=163, y1=69, x2=221, y2=89
Type: 4
Info: 'OK'
1:
Bounds: x1=257, y1=69, x2=315, y2=89
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=48, y1=8, x2=346, y2=59
Type: -120
Info: 'Switching between Translation and Pipeline modes will reset your Envelope and Sweep Path.'
DITL_9514.txt
Items: (4 entries)
0:
Bounds: x1=131, y1=56, x2=189, y2=76
Type: 4
Info: 'OK'
1:
Bounds: x1=228, y1=56, x2=286, y2=76
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=48, y1=8, x2=328, y2=47
Type: -120
Info: 'Resetting the Envelope will lose all modifications you may have done to it.'
DITL_9515.txt
Items: (3 entries)
0:
Bounds: x1=280, y1=72, x2=338, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=349, y2=59
Type: -120
Info: 'You cannot delete more points on the Sweep Path, because it is closed and thus needs at least three points.'
DITL_9516.txt
Items: (3 entries)
0:
Bounds: x1=224, y1=64, x2=282, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=302, y2=43
Type: -120
Info: 'Could not find anything to import.'
DITL_9517.txt
Items: (3 entries)
0:
Bounds: x1=216, y1=64, x2=274, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=283, y2=51
Type: -120
Info: 'There are several paths in this file. The first one will be used.'
DITL_9518.txt
Items: (3 entries)
0:
Bounds: x1=280, y1=72, x2=338, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=347, y2=60
Type: -120
Info: 'You need to draw a Cross-Section before importing artwork as a Sweep Path or as an Envelope.'
DITL_9519.txt
Items: (3 entries)
0:
Bounds: x1=248, y1=64, x2=306, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=310, y2=50
Type: -120
Info: 'This path cannot be imported because it needs to have at least two vertices.'
DITL_9520.txt
Items: (3 entries)
0:
Bounds: x1=240, y1=64, x2=298, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=310, y2=50
Type: -120
Info: 'This file is not appropriate for importing.'
DITL_9521.txt
Items: (5 entries)
0:
Bounds: x1=328, y1=136, x2=386, y2=156
Type: 4
Info: 'Cancel'
1:
Bounds: x1=208, y1=136, x2=278, y2=156
Type: 4
Info: 'Proceed'
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=48, y1=8, x2=392, y2=54
Type: -120
Info: 'There are more than 10 curves in this file. Proceeding may result in a long processing time.'
4:
Bounds: x1=48, y1=56, x2=393, y2=126
Type: -120
Info: 'If you are interested only in a few curves among these many, it is recommended that you put them in a separate file in your drawing program, and then import this file in the Free-Form Modeler.'
DITL_9522.txt
Items: (3 entries)
0:
Bounds: x1=289, y1=88, x2=347, y2=108
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=359, y2=81
Type: -120
Info: 'No Drawing Tool can be used here because the Drawing Plane is seen from the side. You need to rotate around so you can see more of the Drawing Plane.'
DITL_9523.txt
Items: (4 entries)
0:
Bounds: x1=248, y1=168, x2=306, y2=188
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=48, y1=8, x2=312, y2=95
Type: -120
Info: 'You cannot move envelope points of different type at the same time. In the current selection of points, some have a cross-section attached to them, and some do not.'
3:
Bounds: x1=48, y1=104, x2=312, y2=159
Type: -120
Info: 'Please select either points that all have a cross-section, or points that do not.'
DITL_9801.txt
Items: (3 entries)
0:
Bounds: x1=246, y1=68, x2=304, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=177, y1=68, x2=235, y2=88
Type: 4
Info: 'Cancel'
2:
Bounds: x1=22, y1=9, x2=245, y2=58
Type: -120
Info: 'This shader is modifying multiple channels. Would you like to drop its ^0 part ?'
DITL_9802.txt
Items: (3 entries)
0:
Bounds: x1=246, y1=68, x2=304, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=177, y1=68, x2=235, y2=88
Type: 4
Info: 'Cancel'
2:
Bounds: x1=22, y1=9, x2=245, y2=58
Type: -120
Info: 'This shader is more adapted to modifying ^0. Do you want to drop it?'
DITL_9803.txt
Items: (3 entries)
0:
Bounds: x1=251, y1=99, x2=309, y2=119
Type: 4
Info: 'OK'
1:
Bounds: x1=165, y1=99, x2=223, y2=119
Type: 4
Info: 'Cancel'
2:
Bounds: x1=22, y1=9, x2=297, y2=85
Type: -120
Info: 'You may lose information when not saving to CORELDream3D native format.
Do you wish to continue ?'
DITL_9804.txt
Items: (3 entries)
0:
Bounds: x1=265, y1=75, x2=323, y2=95
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=9, x2=325, y2=71
Type: -120
Info: 'An object has corrupted coordinates, it will be moved to the center of the Universe.'
2:
Bounds: x1=16, y1=12, x2=48, y2=44
Type: -96
Info: ' '
DITL_9805.txt
Items: (3 entries)
0:
Bounds: x1=241, y1=81, x2=299, y2=101
Type: 4
Info: 'OK'
1:
Bounds: x1=53, y1=16, x2=301, y2=78
Type: -120
Info: 'The Movie type "^0" can only be written, therefore it cannot be reopened by this application. '
2:
Bounds: x1=12, y1=15, x2=44, y2=47
Type: -96
Info: ' '
DITL_9850.txt
Items: (3 entries)
0:
Bounds: x1=159, y1=125, x2=233, y2=143
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=125, x2=151, y2=143
Type: 4
Info: 'Cancel'
2:
Bounds: x1=14, y1=9, x2=235, y2=95
Type: -120
Info: 'Converting the shape to a rectangle shape will lose information'
DITL_9851.txt
Items: (3 entries)
0:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
1:
Bounds: x1=58, y1=8, x2=309, y2=50
Type: -120
Info: 'There is no instance layer on this object.'
2:
Bounds: x1=214, y1=64, x2=272, y2=84
Type: 4
Info: 'OK'
DITL_18010.txt
Items: (9 entries)
0:
Bounds: x1=329, y1=195, x2=409, y2=215
Type: 4
Info: 'OK'
1:
Bounds: x1=240, y1=195, x2=320, y2=215
Type: 4
Info: 'Cancel'
2:
Bounds: x1=158, y1=70, x2=362, y2=86
Type: 16
Info: ''
3:
Bounds: x1=158, y1=109, x2=362, y2=125
Type: 16
Info: ''
4:
Bounds: x1=158, y1=144, x2=362, y2=160
Type: 16
Info: ''
5:
Bounds: x1=67, y1=72, x2=142, y2=88
Type: -120
Info: 'Name'
6:
Bounds: x1=67, y1=109, x2=153, y2=125
Type: -120
Info: 'Organization'
7:
Bounds: x1=67, y1=144, x2=143, y2=161
Type: -120
Info: 'Serial #'
8:
Bounds: x1=10, y1=6, x2=419, y2=58
Type: -120
Info: 'Please personalize your copy of . You can find your registration number on the inside cover of your manual or on your registration card.'
