home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Hacker Chronicles 1
/
HACKER1.ISO
/
miscpub1
/
phun503.txt
< prev
next >
Wrap
Text File
|
1992-09-26
|
6KB
|
148 lines
_____________________________________________________________________________
| |
| Born to Kill - The Art of Assassination |
| |
| Part I |
| |
| Written by - Jack The Ripper (OC) |
| |
| London at Midnight- 713-523-3733 |
| Phile #3 of P/HUN Magazine Issue #5 |
|____________________________________________________________________________|
This is a series solely written from pure genius. You will not find
the methods outlined here in any book or any other publication. They are for
informational purposes only, and are not to be used. The method I will outline
here will consist of two parts. The first part is the construction of a lethal
injection device. The second part will discuss how to turn this device into a
totally harmless looking device that kills quickly, silently, and effectively.
Construction of a Lethal Injection Device
------------------------------------------
Materials Needed
----------------
Deadly Toxin i.e. air, cyanide, etc... (no specifics are outlined)
Larger syringe if superimpostition is needed.
5 cc or less size syringe with a 3/4 inch needle if unavailable superimpose.
a syringe that's body fits loosely in an emptied cigarette.
Superglue if superimposition is needed.
Cigarette Pack 100's preferably
Preparing the Syringe
---------------------
1) Totally disassemble the syring you will be working with the two parts.
mainly
2) Skip if needle is 3/4's of an inch. Break the needle off of the larger
syringe. Now place glue around the base of the smaller syringes needle not
much just a dab or two. Place the larger needle over the smaller needle
so that it extends it out to the full 3/4's of an inch.
3) cut the length of the syringe (the body only! not including the needle)
down to 1 and 1/2 of an inch with a hacksaw so as to make a clean cut.
4) Now take the push stick or the handle of the syringe and cut off the tip
of it, and cut the body down so that it is 1 and 1/2 inch's long.
5) What you should have now is a push stick that is 1 and 1/2 inchs long and
fits just inside the syringe which is 1 and 1/2 inchs long, and a needle
that is 3/4's of an inch long. The whole contraption should be 3 and
3/4's of an inch enough to fit in a 100 cigarette easily.
Preparing the cigarette
-----------------------
1) Remove the filter from the cigarette by twisting it off, and then throw the
long part of the cigarette away. The paper should extend about 1/4 of an
inch from the filter, and try not to rip it. The paper normally extends
a little bit naturally.
2) Take your tweesers and pick out the filter from the inside of the cigarette
leaving a little bit about 1/4 inch of the filter to cover the end of the
cigarette.
3) Now take another cigarette and tear off the long part, and empty out the
tobacco saving it for later.
4) Now you should have an empty hollow cigarette shell. A bored out filter
with 1/4 of an inch of the ending left on.
5) Now glue the long hollow part of the cigarette back to the filter and let
it dry.
Arming the Contraption
----------------------
1) Now place the toxin into the body of the syringe with the needle on it of
course.
2) Place the pushstick over it extended.
3) Place the setup into the cigarette with the back of the push stick touching
the filter.
4) Fill the remaining space of the cigarette with the leftover tobacco.
How to Use
----------
1) Light the cigarette since the needle end will be filled with a good portion
roughly 1 minute 15 seconds of burning tobacco.
2) Walk by the victim and burn him/inject him by pushing down on the filter of
the armed cigarette.
3) The victim will think it was just a cigarette burn call you an idiot and
walk away.
Notes
-----
1) You might have to experiment with the lengths to get it just right.
2) Only use 1 cc or less of toxin or the victim might notice that something
funny is going on before he dies.
3) Test it before you use it. Cigarettes are a dime a dozen.
4) Never throw it away near the site.
5) Destroy it after it's use since plastic melts this is easy then throw it
in a gutter or a junkyard.
6) Be careful not to scrape yourself.
7) The burn will take care of the pain, so he/she shouldn't notice a thing.
8) There will most likely be an inquest especially when normal people just drop
dead and die.
9) Try to use slow acting 15-30 minute toxins that are lethal in small doses.
Toxins for Use
--------------
1) The Simplest toxin to use is air. An air bubble in the brain causes death
and there is no way in hell a coroner can detect foul play unless he is
looking for it. Not to mention there will be a burn blister over the
injection hole, so it will not be noticed.
2) Be creative think of something.
Conclusion
----------
In conclusion I would like to add that there are many toxins for you
use. There are hundreds of other viable options out there just waiting to be
discovered.
=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Downloaded From P-80 International Information Systems 304-744-2253 12yrs+