home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Desktop Works 1995 - 1996
/
desktopworks1995-1996.iso
/
scrnsave
/
scr_file
/
roses.txt
< prev
next >
Wrap
Text File
|
1996-01-01
|
4KB
|
113 lines
ROSES SCREEN SAVER
ROSES.SCR Random display of Polar Roses - for MS Windows V3.1.
A $5 Shareware registration fee is required.
This screen saver is Copyright c 1994, by Bruce Ranck.
1.0 INSTALLATION
From a DOS prompt, copy this saver file to your windows directory.
(e.g. COPY A:\ROSES.SCR C:\WINDOWS\ROSES.SCR).
2.0 USAGE
To try out the saver, start the control panel (CONTROL.EXE) and double
click on the "DeskTop" icon. Use the combo-box in the screen saver
group to select Roses. Press the "Test" Button to try out the saver.
Use the "Setup" Button to play with some of the options available with
this saver. This saver supports password protection.
Time interval: specifies the number of seconds that a Rose will be
displayed on the screen before a new randomly generated
Rose will start to be drawn.
Columns: specifies the number of Roses that will be drawn
horizontally across the screen.
Rows: specifies the number of Roses the will be drawn
vertically down the screen.
Seed 1: determines the number of leaves that a Rose will have.
and
Seed 2:
Random Colors: The brightness of the randomly generated colors on some
monitors is too low. Initial default is ON. When
Random Colors is not checked ON, seven colors will be
used sesuentally.
Random Roses: When Random Roses is not checked ON, the seed values
will be incrimented from 1 to 300 sequently. Seed 1
will be incremented first.
Screen savers usually do not involve interaction on the part of the user.
It is for that reason that Roses are generated in a random manner with
this screen saver. However, it is possible to experiment with the
generation of specific Roses:
1) Specify Time interval of say 6 seconds.
2) Specify Column value of 1 and a Row value of 1
3) Specify a Seed 1 value of 14 and a Seed 2 value of 41.
4) Select the "OK" Button in the Setup Dialog box and the "Test"
Button in the Desktop dialog box.
A specific Rose will appear before a second Rose will appear on top
of it. Try additional combinations of seed values. My favorite is
Seed1: 144 and Seed2: 1, which puts the appearance of leaves behind
a Rose.
Another set of choices will produce a stunning sequence of Roses when
the Random Roses check box is not checked ON and a Time interval of 0
is specified. See the Dialog Box choices in ROSES.WRI and try it.
As the seed values get larger, it takes longer to draw the Roses.
As a result it will take a second or two to stop the screen saver.
Here is a special note about Time interval: 0. A value of 0 will hog
the CPU and and cause other background programs to run slower. This
occures only when the Roses Screen Saver is active.
3.0 DISTRIBUTION
Please feel free to try this saver out for a week. If you keep it on
your system after that, please send a check for $5.00 as a shareware
fee to :
Bruce Ranck
1 High Cliff Terrace
Ridgefield, CT 06877
If enough people submit the shareware fee, I'll make a Win32 Bit
version for NT and the new 32 bit version of Windows.
Please let me know of any suggestions or problems with this screen
saver. You can reach me at the above address or by phone at
(203) 438-5135.
This is a Shareware product. Feel free to distribute this saver to
other Windows 3.1 users. It would be appreciated if this product was
placed on buliten boards for distribution.
Thanks,
Bruce Ranck
3/26/94
4.0 DISCLAIMER
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall Bruce Ranck
be liable for any damages whatsoever (including, without limitation,
damages for loss of business profits, business interruption, loss
of business information, or other pecuniary loss) arising out of the
use or inability to use this screen saver, even if Bruce Ranck has
been advised of the possibility of such damages.
NO OTHER WARRANTIES. Bruce Ranck disclaims all other warranties,
either expressed or implied, including but not limited to implied
warranties of merchantability and fitness for a particular purpose,
with respect to this software and/or the DOCUMENTATION.