Hall of Fame

home *** CD-ROM | disk | FTP | other *** search

/ Hall of Fame / HallofFameCDROM.cdr / util1 / dzk4d271.lzh / READ1ST.DOC < prev next >

Wrap

Text File | 1991-06-08 | 43KB | 942 lines

tm DiZk4D Version 2.71 "Cataloging & Labeling Your DiZks Under 4DOS" From Unicorn Software Limited Created By: Charles P. Schell IV _______ ____|__ | (R) --| | |------------------- | ____|__ | Association of | | |_| Shareware |__| o | Professionals -----| | |--------------------- |___|___| MEMBER Unicorn Software Limited P. O. Box 911 Wabash, IN 46992 TechLine 219-563-HOME Copyright (C) 1990-91 Unicorn Software Limited {Portions Copyright (C) 1987-90} All Rights Reserved DiZk4D is a Trademark of Unicorn Software Limited 4DOS is a registered trademark of J.P. Software dBase is a registered trademark of Ashton-Tate Unicorn Software Limited is a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware-related problem with an ASP member by contacting the member directly, ASP may be able to help. The ASP Ombudsman can help you resolve a dispute or problem with an ASP member, but does not provide technical support for members' products. Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442- 9427 or send a Compuserve message via CompuServe Mail to ASP Ombudsman 70007,3536" LICENSE AGREEMENT DiZk4D is a "shareware program" and is provided at no charge to the user for evaluation. Feel free to share it with your friends, but DiZk4D must be distributed in unmodified, complete form, including this Reference Guide and License Agreement. Also, DiZk4D may not be distributed in conjunction with any other product. The essence of "user-supported" software is to provide personal computer users with quality software without high prices, and yet to provide incentive for programmers to continue to develop new products. If you find this program useful and find that you are using DiZk4D and continue to use DiZk4D after a reasonable trial period, you must make a registration payment of $25.00 to Unicorn Software Limited, P.O. Box 911 Wabash, IN 46992-0911. Or you can use your MC, Visa, AmEx, or Discover by calling the Public(software)Library at 800-2424-PsL or 713-524-6394 or by FAX to 713-524-6398 or by CompuServe to 71355,470 or by mail to PsL, PO Box 35705, Houston, TX 77235-5705. These numbers are for ordering only, order #10222. For information about dealer pricing, site licensing, shipping of product, returns, latest version number or technical support call 219-563-HOME or write to Unicorn Software Ltd. directly. The $25.00 registration fee will license one copy for use on any one computer at any one time. You must treat this software just like a book. An example is that this software may be used by any number of people and may be freely moved from one computer location to another, so long as there is no possibility of it being used at one location while it's being used at another. Just as a book cannot be read by two different persons at the same time. The DiZk4D cataloging program is protected by United States Copyright Law and International Treaty provisions. All rights are reserved. Non-registered users of DiZk4D are licensed only to use the program on a trial basis for the sole purpose of determining whether or not it meets their requirements. All other use requires registration. Commercial users of DiZk4D must register and pay for their copies of DiZk4D within 30 days of first use or their license is withdrawn. Site-License arrangements may be made by contacting Unicorn Software Limited. You are encouraged to pass a copy of DiZk4D along to your friends for evaluation. Please encourage them to register their copy if they find that they can use it. All registered users will receive a copy of the latest version of the DiZk4D system, free updates and another Unicorn Software program to try. WARRANTY Unicorn Software Limited makes no warranty of any kind, express or implied, including without limitation, any warranties of merchantability and/or fitness for a particular purpose. Unicorn Software Limited shall not be liable for any damages, whether direct, indirect, special or consequential arising from a failure of this program to operate in the manner desired by the user. Unicorn Software Limited shall not be liable for any damage to data or property which may be caused directly or indirectly by use of the program. IN NO EVENT WILL UNICORN SOFTWARE LIMITED BE LIABLE FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR INABILITY TO USE THE PROGRAM, OR FOR ANY CLAIM BY ANY OTHER PARTY. The License Agreement and Warranty shall be construed, interpreted and governed by the laws of the state of Indiana. Unicorn Software Limited is in no way associated with or part of J.P. Software and is not qualified to answer technical questions concerning 4DOS. Questions about 4DOS should be addressed directly to J.P. Software at 617-646-3975 or by mail at PO Box 1470 E. Arlington, MA 02174 I spend quite a bit of time hanging out in the Shareware conference on the RIME network. This provides support for users of Unicorn's programs and it gives me ideas as to what is and isn't working in the world of Shareware. One day I was reading some messages about OMNIDiZk (The DOS DiZk cataloger and labeling system), one of the messages was from a user who asked if the program was 4DOS compatible. I said I did not know but I would check it out. After spending some time checking out 4DOS and OMNIDiZk I realized that while the programs were compatible, there were functions in 4DOS that did not exist in regular DOS. So, with keyboard in hand I rewrote OMNIDiZk into a completely new program: DiZk4D. The name change was to prevent the misunderstanding that this was just another version of OMNIDiZk and to (hopefully) prevent users from getting the wrong version for their operating system. {If you have read this far and do not know what 4DOS is, you obviously have this program thinking it could be used with regular DOS. Forward the copy you have, where you got it from and $1 (for P&H) and I will send you a copy of OMNIDiZk, which is made for regular DOS.} DiZk4D will: Read a floppy into memory and let you save the data (The saving is optional). Let you enter a 21 character title, 4 digit DiZk number, 3 character code and two lines of remarks up to 65 characters each. Let you change or add file descriptions. You have the option of using the same description for all files, or describing them individually using a full screen editor. Print out 4 X 1 7/16, 1 15/16 X 2 3/4, or 3 X 15/16 labels of the file names. Print out 4 X 1 7/16, 1 15/16 X 2 3/4, or 3 X 15/16 labels of the file names and descriptions. Print out or write to a file complete or select listings and catalogs. Print out a complete list of all file information, or write that information to a file. Perform Find! searches on any filename, description, date, title, DiZk number (alphanumeric), code, or remarks. Allow complete Updates of DiZks or of just the title info. Let you set the printer codes to match your printer. Let you set up the colours, and select data and read drive. Let you use Auto numbering of DiZks. Creates a dBase compatible file with filenames in it. Swaps program to Extended or Expanded Memory, or to DiZk (User Defined). Assumptions: You have 4DOS installed as recommended by J.P. Software and it is running properly. You have any TSRs or Caching systems properly configured for 4DOS. If you do not allow DiZk Swaps, you have at least 580K RAM free, or 320K RAM free if allowing DiZk swaps, when trying to Add or Update Files or Shelling to 4DOS. If you are running any of the other options of the system, it only requires 320K RAM free. To see if you have this much memory free run the MEMORY command prior to executing. Getting Started: DO NOT INSTALL THE PROGRAM IF YOU ARE ALREADY USING IT, SEE BELOW FOR INSTRUCTIONS ON HOW TO UPGRADE. Type DiZk4D to start. When you first start the program, the computer will bring up the Default Set Up screen first. Just enter the info requested. When you name the DiZk Drive, the program will automatically copy the data files to that drive for you !So Have A DiZk READY! In order to create new data DiZks see below. About 350 records can be stored on a single 360K floppy DiZk. QEMM.SYS And Other Extended Memory Managers: Occasionally a problem will be incurred by a person using QEMM.SYS or other extended memory manager. This has to do with the way that the SYS file manages memory vs the way that the program wants to use the extended memory (The program will attempt to use extended memory automatically, if it is available). On the distribution disk there is a program called UNIEMM.COM (This can be renamed to any legal file name EXCEPT the name of the EXE program). If you attempt to run the program and get a DOS ERROR or RUN ERROR message at the top of the screen, use the UNIEMM utility to start the program. It will tell the program you are using an extended memory that has this anomaly and command the program to remain in low memory instead of switching to extended memory. After passing these instructions to the program, the program will start with no other commands needing to be entered. First the Default Set Up screen will appear, you must make the following decisions at this time: Data Drive: Whatever drive you will save data on. Read Drive: The drive the program is to read for information. File Name: Any eight character filename allowed. Reserved name is TEMP. NOTE if you decide later to change the data drive you are using you must FIRST copy all the files with the DAT and NTX extensions to the new location THEN enter the program and using the Set Defaults Screen (From the Utilities Menu) set the drive to the new location. If you wish to create additional data files see details below. Save Data?: You can choose to save the DiZk file data and use the Find! and other functions. "Y" or "N". If you select "N" at the end of the session the data files will purge themselves and be blank next time you start. Auto Numbering: This allows the computer to enter the next available number when adding a new DiZk. The DiZk number can be alphanumeric. If you answer Y, adding will take a few seconds longer: The program will search and find missing numbers to use first before it goes to the next number. For example you have dizks numbered 1-10, later you delete dizk 5; the program will use 5 before using 11. Use EXTENDED Memory: If you desire to use EXTENDED Memory answer Y. {EXTENDED Memory is the RAM in your system from 640K to 1 Meg, EXPANDED Memory is that Memory above 1 Meg.} K To Protect: This is the amount of K you wish DiZk4D to attempt to protect because you have it in use by TSRs, RAM DiZks, etc. If the program already in the EXTENDED Memory does not protect the space it uses, this option allows you to try to let DiZk4D protect the space for it. This is not 100% effective. Only trial and error will tell what will work and what won't. Example: You have a 256K RAM DiZk in EXTENDED Memory, you would specify 256 for K To Protect. WARNINGS ON USING EXTENDED MEMORY: It is recommended that if you use DiZk4Ds EXTENDED Memory capabilities, you do NOT install anything else that uses EXTENDED Memory; but if you must install a RAM DiZk or some other program that uses EXTENDED Memory, it is possible that the other program that uses EXTENDED Memory is intelligent enough to protect the memory it uses. THIS IS NOT THE NORM. Unicorn Software will NOT be responsible for destructive results from using EXTENDED Memory with DiZk4D. If you tell DiZk4D to use EXTENDED Memory and you already have a diZk cache installed that is using the same EXTENDED Memory (and you fail to protect the K used, or if the protection fails), you can crash your hard drive! This happens because DiZk4D may write over the EXTENDED Memory in use by the diZk cache. NONE OF THIS APPLIES TO EXPANDED MEMORY ONLY EXTENDED MEMORY. Use DiZk Swapping: Answering 'Y' will allow DiZk4D to swap parts of the program to EXPANDED Memory or DiZk to conserve RAM (258K RAM to be exact). One note: The only time the answer should be 'N' is if you are operating from a floppy drive, do not have EXPANDED Memory, and there is not at least 280K space free on the floppy for the program to swap to. Colours: Are as follows: Color Letter ------------------ Black N Blue B Green G Cyan BG Red R Magenta RB Brown GR White W ------------------ Date Format: You have the following choices: A=American MM/DD/YY {Default} B=British DD/MM/YY F=French DD/MM/YY G=German DD.MM.YY I=Italian DD-MM-YY You can always go back and change any of these settings by using the Set Defaults option on the Utilities Menu. The System: Is designed using KISS (Keep It Simple Stupid) so not much information is needed to get started. Here are a few notes to help you use the system: Universals: The ESC key will take you back one menu or abort operation. The box in the upper right hand corner of the screen will contain information on how to move around, and data entry tips. The last line of the screen will tell you what the highlighted option does. All menu entries can be selected with the light bar, or by pressing the first letter of the option. Quik Info: By pressing the F1 key at any time you can have Quik Info displayed. This is data YOU enter. To change the Info, just use the Quik Info Set Up option from the Utilities Menu. I suggest using this for tracking the Codes you use. Sample Data: There is one DiZk of sample data already in the system. It is for your use to play with all the functions of the program, prior to entering your own data. Make sure to delete it before you start entering your own data. Add: After reading the DiZk a screen will appear to let you Title the DiZk (up to 23 characters), add DiZk number (up to 4 Alphanumeric characters), add a Code (Up to 3 Characters), add Remarks (Two lines 65 characters each). ***NOTE: If you plan on using 2 3/4 wide labels you need to limit to Remarks to 40 characters, Descriptions to 29 characters, and Titles to 15 characters. This is the longest that type of label will handle. A ^ on the screen shows these limits. For 3 1/2 labels the Remarks can be no more than 52 characters long, and Descriptions no more than 39 characters; this is marked by the second ^. Codes: I suggest the following: G = Games UNI = Unicorn Software Programs *grin* U = Utils WP = Word Processors D = Data Bases GR = Grafix DOC = Documents SW = Share Ware L = Language H = Home Of course you can make them anything you like. Sub Directories: The program does not read files within a subdirectory, but it does read and handle the Sub Directory name as a file (ie /TEMP <DIR>) and it can be described and handled as a file. If you want to read a Sub Directory into the system: 1. Add the diZk Root Directory. 2. Return to the main menu and then use the Shell To 4DOS option from the Utilities Menu. While exited, use the CD option to change to the read drive from the root to the desired subdirectory. 3. Return to the Drive/Directory that DiZk4D is in and type in EXIT. 4. Return to the Add Option and Add the subdirectory, using the same DiZK number. 5. Repeat for all subdirectories you desire to read. {Note: This also works to Add your hard drive to DiZk4D} Why DiZk4D doesn't read Sub Directories: Memory. The program would take up more RAM, with the way 4DOS operates now, than it already does. Since Subdirectories on floppy drives are not widely used and in cases where they are treating it as a file will provide enough capability to document them properly (ie: PRINT <DIR> 1-03-91 Print Drivers.) I decided to drop this capability in favour of using less memory. If 4DOS memory handling changes I will change the program to add this option. Descriptions: After you Add you have the option of changing/updating file descriptions. If you have previously written file descriptions for the files they are automatically transferred into DiZk4D, if not any changes or additions you make will be added to the DiZk, as well as your data file. The program will allow you to use one file description for all files, or to use a point and shoot menu to make changes. If you choose to use the same description for all of the files the program will default to the Title for this description, if you don't want to use that, just type over any description you do want to use. You can also enter R for review at this point. This will allow you to put one file description for all files, then go into the point and shoot menu to make adjustments or to omit files from the catalog (see below on how to omit files). The point and shoot menu brings up one screen of files at a time use the Up/Down Arrow keys until the lite bar is on the file you want to select and then the Return key to make changes. When you are done with a screen hit the PageDown key. At that point you can use the Up/Down Arrow keys to move forward or backward through the rest of the files or Home to complete the changes. By using the PageUp key you can choose not to include a particular file in the catalog, it will be marked with a left arrow symbol. This does not delete it from your dizk, it just does not include it in the catalog file. It will still change or add the description on the dizk itself. Hitting the PageUp key a second time will include the un-omit the file. Change: When you select this option the screen will display up to 32 DiZk numbers and titles. Move the light bar to the one you want to Update and press the enter key. The ESC key will take you back to the Main Menu and the PageDown key will bring up the next 32 titles. When the program reaches the bottom of your file it will start again. You also have the option of looking for a specific DiZk number or title (These will always be the last two displayed, so use the end key to get to the bottom and select the one you want). Update Files/Supplemental Info: When in Update mode you have the choice of updating either Files or Other Info. If you choose files put the DiZk in your Read drive, for Other Info you do not need the DiZk. If you are updating files, after the files have been written to the DiZk you have the opportunity to transfer the old file descriptions and/or change/update the descriptions. See Add for how this function works. If you are updating Supplemental Info, when you are complete with one DiZk and hit the PageDown key you have the option of going to the next DiZk in the file (PageDown) or the previous DiZk (PageUp). If you are using the DiZk Title or Number options only DiZks with that title or number will be displayed. Hit the Home key to exit out of Update. Erase: When you select this option the screen will display up to 32 DiZk numbers and titles. Move the light bar to the one you want to Update and press the enter key. The ESC key will take you back to the Main Menu and the PageDown key will bring up the next 32 titles. When the program reaches the bottom of your file it will start again. You also have the option of looking for a specific DiZk number or title (These will always be the last two displayed, so use the end key to get to the bottom and select the one you want). Close 'Nuf: By entering DiZk Title option on the Update or Delete screens you will be prompted to enter the title of the DiZk you wish to deal with. You do not have to enter the full title, only the first few words, or even letters. In Update this will allow you to view all the records that are Close 'Nuf to what you entered. EXAMPLE: Entering "ZORK" will bring up "ZORK II", "ZORK HINTS" and "Beyond Zork". Capitals and lower case are seen as the same. Lists&Labels: You have a choice of using all the DiZk info, or using a criteria. Criteria: You can choose to print out for specific codes (Close 'Nuf does not apply here) or you can select individually from the entire list. Individual selection is accomplished by choosing the number next to the title you wish to include (these numbers are NOT the DiZk numbers). To deselect just enter the number again. PageDown brings up the next screen of titles, ESC Aborts the use of individual selection and Home completes selections. Lists&Labels: Listing: You have the option of writing to a file (DiZkLIST.TXT on your data drive) or printing the information. This will output the DiZk number, title, code, and remarks for either all of selected criteria. Catalog: You have the option of writing to a file (CATALOG.TXT on your data drive) or printing the information. This will output the DiZk number, title, code, remarks and all file info (including name, size, date, and description) for either all of selected criteria. This will print out the DiZk number, title, code, and remarks for either all of selected criteria. Labels: Description Labels: Prints file names and descriptions for selected DiZks (The large labels also include the file date). If the information will take up more than one label the program will print out subsequent labels until all of the information is printed. You can always put the extra labels on the DiZk sleeve. This type of label is great for ZIP files since only a few will fit on a DiZk and what is in them is more important than just the file names. The Remarks lines for the small lines are trimmed to the first 52 characters of each line (to get them to fit) for the large labels they are complete. File Name Labels: Prints file names for selected DiZks ( 4 across on small labels 5 across on large labels). If the information will take up more than one label the program will print out subsequent labels until all of the information is printed. You can always put the extra labels on the DiZk sleeve. This type of label is great for single program DiZks when what the filenames are is is more important than the descriptions. Large Versus Small Versus Medium Labels: Large labels are 4" X 1 7/16". Small Labels are 3 1/2" X 15/16". Medium labels are 1 15/16"X 2" (3.5" dizk labels). You will be given the option of checking printer alignment before the program starts. It is recommended that you always do this before printing. It will reprint the test print repeatedly as long as you answer Y. File List: Will print a listing of every single file, size, date and description for the DiZks you select. It takes a lot of space to do this! It is recommended for use with a hard drive only. You do have the option of writing this information to a file (FILELIST.TXT on your default drive) or sending it to your printer. ESC to Abort P to Pause: These options are available during printing to help if you need to make adjustments. They are sometimes NOT immediate, depending on your printer buffer size and the speed of your printer. If you hit P you will be prompted to hit any key to continue; therefore if you hit P twice the program will pause for a second and then continue. You can not Pause writing to a file, only Abort. DiZk4DFind!: Can help you find all of the DiZks in the data file that have a particular Title as well as Code, File Name, Description, Date, or Remark. Using "Close 'Nuf" you can Find! any record easily, ie enter as much information as you remember and it will search based on your input, even if it is only one letter. NOTE: PageUp on these data display screens will take you back to the previous record, PageDown to the next record and Home to the DiZk4DFind! menu; use the Arrow Down key to see the second page of a particular DiZk. If you are Find!ing File Name, Date, or Description the file name requested will flash on and off to alert you to its whereabouts. This makes them easy to find in a screen full of information. Utilities: Indexing: You have the option of putting the file in DiZk number, Title or Code order. Build For Speed: Should be run occasionally to keep the files in sequential order as well as random order. Always run prior to printing. Chase Ghosts: This feature should be run if you get blank records in your data file, by accident. Default SetUp: See above (Getting Started) for info. To make a New data dizk: Blank out the Default Data Drive, then hit PageDown. The program will then allow you to enter a new data drive and new file name. Printer SetUp: This allows you to customize the printer codes used by the program. These codes can be found in your printer manual. The codes that the program has when originally distributed are for the Epson FX100. You will need to know the code for 10 cpi (Pica), 12 CPI (Elite), Enlarged, Condensed (17CPI) and Double High/Wide, Sub Script and N/72 Line Spacings. If your printer cannot handle double high/wide DON'T PANIC, just leave it blank; the program will use Enlarged for that entry. You do not have to enter the ESC part of the code, the program will add that automatically. For example ESC 119 must be entered as "119" (Do not enter any " "s!). Quik Info SetUp: This allows you to change the information that is displayed when you hit F1 key. You have 6 lines. This can be helpful for storing codes or other info you might need while in the program. Shell To 4DOS: You can shell temporarily to 4DOS by using that option on the Utilities Menu. If you have not allowed DiZk Swaps: the file 4DOS.COM and 4DOS???.EXE must be on the same DiZk as the other programs and in the root directory and you must return to the subdirectory/drive of DiZk4D prior to entering EXIT to return to the program. If you have allowed DiZk Swaps location of 4DOS files and returning to subdirectory are not important. Upgrade To 2.71 From 2.50 Or Earlier: If you are using a version prior to 2.71 of DiZk4D this will help you upgrade your existing data files. Before installing ANY of the programs files: 1. Copy the ALL files with the DAT extension from your existing sub directory or diZk onto a work diZk or sub directory and set aside. 2. Copy all of the files from the distribution dizk containing version 2.71 onto your existing dizk or sub directory. 3. Start the program and complete the Default Set Up screen as you desire, then from the Main Menu go to the Utilities Menu. Select the Upgrade To 2.71 option from the Utilities Menu. 4. Once selected you will be prompted for the sub directory or dizk location and the file name of the old files. DO NOT INCLUDE THE DAT EXTENSION! For example your old data file name was DIZKS and you have copied it to sub directory TEMP on you C: drive. When prompted you would enter: C:\TEMP\ for location and DIZKS for name. 5. The program will import all of the old files into version 2.71. 6. Registered Users have the option of just mailing their old data files (and .75 in stamps) to Unicorn and having them Upgraded for them. Upgrade To 2.71 From 2.60 Or Earlier: If you are using version 2.60 of DiZk4D this will help you upgrade your existing defaults file. Before installing ANY of the programs files: 1. Rename the file COLOUR.SET to COLOUR.OLD. ie RENAME COLOUR.SET COLOUR.OLD. 2. Copy all of the files from the distribution dizk containing version 2.71 onto your existing dizk or sub directory. 3. Start the program and when the Default Set Up screen appears type in the word UPGRADE for filename, then hit the PageDown key. 4. The program will then import your old default information and accept your old data files. 5. Registered Users have the option of just mailing their old default data file (and .75 in stamps) to Unicorn and having them Upgraded for them. **WARNING** Failure to upgrade from your old defaults file will result in your data files being over written by the program. dBase Compatibility: The file starting with F and your data file name (ie data file DIZKS.DAT would have the F file FIZKS.DAT) is a file containing all of your filenames and can be used by dBase without any other alteration. *WARNING* If you alter the contents of this file, or in any other way resort it it will be incompatible with DiZk4D. It is advised that you copy this file to another name and use the copied file rather than the F File. Error Messages: Error Messages will appear at the top of the screen when an error occurs. The most common errors are "Open" which means the program can't find the data files and "Printer not ready". You will be given the choice of correcting the problem or aborting. "Printer not ready" can appear if your printer is not printing as fast as the program is sending information, just answer Y to the "Retry" question to continue. Swaping Errors: If you get an error message in the center of your screen that says: {No Space On DiZk To Swap or Error Writing File} this is caused by lack of free space on your disk drive, check for free space and if less than 280K space is free, turn DiZk Swapping option off (Set Defaults Menu). If the error says {Memory Error During Swap}: 1. Turn off EXTENDED Memory use and retry, or 2. Check your EXPANDED Memory driver to make sure it is correctly configured. Technical Assistance & Latest Versions: Both registered and unregistered Users can obtain technical assistance by calling (219) 563-HOME (4663). Unregistered Users will need to provide the name and address of where they obtained the software from in order to gain this assistance. This will let us go back to that company if they are distributing an older version and it helps us track who is distributing the program. The number is manned (by a human) from 6:00 to 9:00 PM EST, all other hours by an answering machine. ******************* Unicorn Software Support conferences exist on the following BBSs: ** The Kokomo BBS: 317-457-9100 ** The RoadHouse BBS: 317-784-2147 (FIDONET 1:231/290) Both BBSs allow first time downloads and will always have the latest versions of Unicorn's software. Unicorn Software programs are available via "File Request" from The RoadHouse BBS (1:231/290). You can FREQ the magic name "UNICORN" from 1:231/290 for information on Unicorn Programs and their FREQable "magic" names.) ******************* Also, we monitor the Shareware conference on the following networks: RIME, Intelec, NANet, MediaNET, and NAPNet. The regional hub for RIME in Indiana (IBM-NET) will upload any of Unicorn's files to the net on request: ** IBM-Net BBS: 317-882-5575 The regional hub for Intelec, NAPNet, and MedaiNet will upload any of Unicorn's files to the net on request: ** Media Net 317-547-6204 ******************* All of Unicorn's programs are also available through the Shareware Distribution Network (SDN), and may be downloaded from any SDN location. The Central Indiana SDN contact point is: ** Someplace BBS 317-353-9981 (FIDONET 1:231/120) ******************* The above listed BBSs will always have the latest versions within hours of release. Additionally, these BBSs have proven to be reliable and worth the cost of every minute of connect time. Even if you are not looking for our latest versions: Give Them A Call! Unicorn Software Limited is in no way associated with or part of J.P. Software and is not qualified to answer technical questions concerning 4DOS. Questions about 4DOS should be addressed directly to J.P. Software at 617-646-3975 or by mail at PO Box 1470 E. Arlington, MA 02174 Other Unicorn Programs: All programs are MSDOS compatible, run on 256K RAM, use IBM graphics/laser printers, mono or colour monitor, and can operate on one/two or hard DiZk drives (except DayMaster which requires a hard or high density drive). The User can set the colours, printer codes, and default data drive. There are no 'crippled' features or options. The only difference between the shareware and registered versions is the lack of 'plea' screens on the registered version and the clarity of the Users conscience. The *Master Series AlbumMaster - To help you catalog your Albums and assist you in printing catalogs, listings and labels for the front of the Album. There are entries for Album Number, Title, Artist, and up to 12 Tunes on each side as well as Category and 3 User defined fields. The User can also define three entries for use as producer, writer, opinions etc. The program will hold up to 9999 Albums (depending on DiZk space) and can be used to find even a single song. It will also produce a list of every Tune you have in addition to the regular catalogs. Multiple data field Finds! and User designed listing make this a must have for audiophiles. CassetteMaster - To help you catalog your cassette tapes and assist you in printing catalogs, listings and inserts for the case and front of the tape. There are entries for Tape Number, Title, Artist, and up to 14 Tunes on each side as well as Category. The User can also define three entries for use as producer, writer, opinions etc. The program will hold up to 9999 Tapes (depending on DiZk space) and can be used to find even a single song. It will also produce a list of every Tune you have in addition to the regular catalogs. The case inserts not only print all the tunes, artist, and title but the User defined info as well. Find! and Criteria print option make this very useful for the 'home recorder' or the 'store bought' cassette tape user. VideoMaster - To help you catalog your video tapes and assist you in printing catalogs, standard and User customized listings and labels for the spine and front of the tape. There are entries for Tape Number, Title, Rating, Start Point, Star, Co Star, three User defined entries and a seven line Synopsis as well as Category. You can find any tape by any field. The system will handle up to 9999 entries, depending on DiZk space. The program can handle up to 5 titles per tape, great for the home video buff. PostCardMaster - The program will help you compose post cards and maintain addresses on DiZk. Then you may retrieve either listings of the addresses and cards, address labels, 3X5 cards, 4X6 post cards or Roladex cards. The primary purpose of the program is to print post cards, and address them for you. Post cards cost 1/3 the price of a letter and in some cases are equally as good ie meeting notices, invitations, change of address. This program is a replacement for an earlier Unicorn program released in 1984 called FORWARD2. DayMaster - The program provides User with trivia, birthdays, anniversaries for a particular date, but also allows User to include their own information for any date. It also gives a quote for the day, and informs User of any reminders (Weekly/Daily/Monthly/Single/Annual/Range Of Dates) the User might have. All of this can take place at boot up or any other time User activate the program. The data file contains over 2500 historical events and quotes. {$20} CDMaster - To help you catalog your CDs and assist you in printing catalogs, listings and labels for the case and front of the CD. There are entries for CD Number, Title, Artist, and up to 24 Tunes as well as Category and 3 User defined fields. The program will hold up to 9999 CDs (depending on DiZk space) and can be used to find even a single song. It will also produce a list of every Tune you have in addition to the regular catalogs and case inserts. Find! option locates CDs by any of the data fields or by a User defined mix of data fields. The OMNI* Series OMNIDiZk - A DiZk cataloger and labeling utility. Features: Reads a floppy into memory and lets you save the data (The saving is optional); Print out 4 X 1 7/16 or 3 X 15/16 labels as well as catalogs; Perform Find! searches on any files that you have saved; Print lists of every file in the data file; Allow complete Updates of DiZks or of just the title info; Let you enter a 23 character title, 3 character code and two lines of remarks up to 52 characters each; Let you set the printer codes to match your printer; you can also set the colours, and select the data and read drives. OMNIDay - Handles up to 10 Users with PassCode protection for privacy, optional encryption of data with 10,000 possibilities per User automatic entry of text date line and a full function text editor to handle entries. The data file is dynamic (only as large as entries) and can be located on any drive. Entries can be from 1 to 5000 lines with the ability to change history (Alter Entry) and the ability to make history vanish (Erase Entry). The Reminisce feature allows user to 'thumb' through entries or they can print out the entire opus or selected dates. User: defines printer codes, names data file, sets screen colours, names the opus and enters their name into program for use on screen and in reports. The Comp* Series CompUser - It is a rated cyclopedia with the names, addresses and phone numbers of shareware distributors, hardware companies, authors, computer clubs, BBSs and more. Almost 4000 entries are in the complete database and it is updated almost daily with revisions being mailed out every 90 days. The program creates, edits & prints post cards, address labels and more. It will also import new data and allow the user to change the data in the file. Great for clubs (looking for authors and distributors), shareware authors (looking for markets), shareware libraries (looking for authors), BBS Users (looking for new BBSs) and the average Comp{ter}User (looking for all of the above). All entries are rated A,B,C,D, or F for size of operation and the way that they conduct business. This alone makes it worthwhile because Users can avoid poorly rated businesses that have historical problems and lack good customer service. To get any of the above titles check with your favourite Shareware dealer or do one of the following: 1. Send three blank formatted DiZks per title to Unicorn and we'll copy it off. {Each title takes one DiZk the extra DiZks cover P&H} 2. Send $3 to Unicorn per title and we'll take care of the rest. Enjoy! Charles P. Schell IV 2.50 Quik Info key added Fixed A Bug In The Update Mode 2.60 File Structure changed to make the system 23% faster.{Based on tests done with an 8088 using a data file of 100 DiZks.} 1 15/16" X 2 3/4" labels added. Upgrade from previous versions to 2.60 added. Data file now fully relational. DiZk Swaping Added reducing RAM requirement by 258K. Added compatibility utility program for users of QEMM and other extended memory managers. 2.70 Added Date formats of the world. Released 5/15/91 Made all backgrounds textured and redesigned all menus. Added a point and shoot command to omit specific files from the catalog during Add or File Update options; while still changing the DESCRIPT.ION file on the idzk. Upgrade from previous versions to 2.70.