home *** CD-ROM | disk | FTP | other *** search
- ==Phrack Inc.==
-
- Volume One, Issue Eight, Phile #6 of 9
-
- COMPUSERVE INFO
- ---------------
- Compiled and
- Related by:
- Morgoth and Lotus
- -----------------
-
- Since its rather humble beginnings in Dublin, Ohio some years ago,
- Compuserve, or CIS, as it will be referred to in this article, has grown to
- become the largest entertainment/public user oriented system in the country.
- This file is divided into two parts. The first is how to get your own CIS ID
- number, and make it last a relatively long time. This part may seem like old
- hat to some of you out there. The second part is information on what to do
- once you are on the system...tricks and tips to keep you out of trouble, or
- cause trouble.
- A Compuserve identification number is divided into two parts; a project
- number and a programmer number. An example would be 70007,1460. This ID is
- what you will be known by at all times on the system. When you log on, you
- will also be prompted for a password, in addition to your user ID. The
- password is divided into two words, kept apart by a separator (-,:,.,etc). The
- password may be any two words the user desires, including garbage, which makes
- gaining an ID by hacking the password almost, if not totally, impossible.
- The most popular, and about the only way left, of gaining an ID is by buying
- what the system calls a snapak. These are the little goodies you see in the
- store in the introductory packets. With this, you can gain access to most, but
- not all of the system.
- The first ID, or the "intro" ID will last about a week, at which time,
- Compuserve automatically changes the password, and sends the new one to you via
- the US Postal service. This is a key point to the ID scam. You MUST have
- valid Credit Card information to be able to continue using the ID. I have
- heard of intro IDs going bad in a matter of 2 or 3 days due to having non-valid
- credit card info. So you need to set up a location to which your second
- password can be mailed. This second password should last about a month,
- depending on how much credit the CC holder has on his card.
- When applying credit to a Visa or Mastercard, Compuserve will submit the
- charges about once a week. If you run up about $500 in connect charges, and
- the credit card cannot hold it, the ID will go bad. This is the most common
- way for an account to run out.
- Your first password has some limits. Due to hackers using snapaks,
- Compuserve has installed a system which prohibits IDs without the second
- password from entering any type of game online. This ranges from the
- ever-popular MegaWars, to YGI, all the way down to Casino. This is one reason
- why the second password is so important.
- If more than one person will be using the account, which is usually the
- case,
- there are also some limits to be observed. The same ID can no longer enter the
- CB simulator more than once. If it is tried, the message "exceeding job limit"
- will occur, and you will be taken back to the prior menu. The same ID can go
- into a SIG at the same time, but both people cannot enter COnference mode while
- on the SIG. The best way to talk to another user who is on the same ID is to
- go into any forum, say CBMART, and have one of them enter COnference mode.
- There, the two users can use the /SEN command to relay messages between the SIG
- and COnference. This is kind of complicated, but it is the only way. Also,
- anytime the message "exceeding job limit" goes to your screen, the people at
- CIS put a small "red mark" by your name. If it occurs too frequently, they
- look into the situation to find out if more than one person may be using the
- same ID.
- Special IDs -- Ok, now that you are on Compuserve, what should you look out
- for? As mentioned before, the user ID is divided into [project
- number,programmer number] format. The Programmer number is of no importance,
- but the Project number is. Some of the ones you should be aware of while
- online are:
-
- 70000,xxxx Compuserve Security
- 70003,xxxx Compuserve Employee
- 70004,xxxx Same as above
- 70005,xxxx Radio Shack demo account
- 70006,xxxx Customer service, or "Wizard" number (see below)
- 70007,xxxx Complimentary account
- 76703,xxxx SIG SysOp, or Forum Info Provider
-
- While on CB, look out for the 70000 IDs, and especially the 70006, or
- "wizard" numbers. The Wizard ids have some very special functions. The main
- one is called autogag, or /GAG. This allows the bearer of this ID to banish
- any user from the system, in a way. What it actually does is to keep the
- /GAGged person out of everyone's view. They will not show up on the /ust list,
- and anything they type will not show up on anybody else's screen. Kind of like
- a mute button on a television. The Chief of CIS security is Dan Pisker, and on
- CB he uses the handles "Dan'l", or "Ghost", with a 70000 id.
- Monitoring -- This is a very popular subject with the users of Compuserve,
- but when broken down, it is quite simple. CIS is capable of monitoring
- ANYTHING that is said on the system. This doesn't mean that they do, however.
- For /TALK to be monitored in a Forum or on CB, CIS must first have a court
- order...it is supposedly as illegal as tapping a phone line. This has been
- done before to catch some major hackers on the system. /SEN in a SIG is not
- supposedly monitorable....the status on it is the same as on /TALK. /SCR mode
- on CB or on a SIG is definitely monitorable, especially if the the /SCR key is
- typed on open channel. Keep /SCR conversations to a minimum. As far as
- anything else goes, anything said on open channel is quite definitely seen by
- SOMEBODY in the big chair up in Ohio. It would not surprise me at all if they
- hire people to go through CB Transcripts every day to look for that kind of
- thing. Also, when you are in COnference mode in a SIG, always check the
- /STAtus of the channel. If /STA EVER returns that there are more people on the
- channel you are on than the /USERS function does, then you can rest assured
- that the channel is being monitored.
- Nodes -- When you log on through CIS, you are going through a node. The
- node
- takes the form of 3 letters, designating the site of the computer through which
- you are connecting through Compuserve. An example would be "NYJ" (New York
- City). There are some special nodes you should know about, though.
- Tymnet - Anybody logging on through Tymnet will be assigned one of these
- nodes - QAI, QAJ, QAK, QAC, QAM, QAN, QAO, QCA, QCB, QCC, QCE, QCF, QCH. This
- cannot identify where you are calling from, just that you are logging in
- through the Tymnet network.
- Telenet - QBA, QBC, QBD, QBG, QBF, QEN, QEI, QEP.
- Also, another special node would be DB- (DBA, DBB, DBC, etc), which means
- that the user is logging on from Compuserve's Headquarters in Dublin.
- The way to tell what node somebody is in is by typing /UST on either CO
- mode
- onBU SIG, or CB...the result is like this....
- Job User Id Ch. Node Handle
- --- ---------- --- ---- ------
- 1) 12 70003,1295 17 CSG Red Leather
- 2) 133 70006,1293 1s BAF Surf's Up!
- 3) 69 76703,1211 Tlk BOO JOE CUFFS
- 4) 22 70000,1959 30* DBA Pig
- Now, you can tell something specific about each of these four people based
- on
- the info given above. Red is in Columbus, Ohio, and is on Channel 17. She is
- also a Compuserve Employee. Surf is in Bakersfield, California, and is a
- Customer service personnel. He is also using /SCRamble. Joe is in Talk, is a
- sysop on a SIG, and is in Boston, Massachusetts. This is the format for Talk
- on CB. Pig is on talk in a SIG, and is a security personnel from Dublin, Ohio.
- The format for showing if somebody is in /Talk is different on a SIG than in
- regular CB. Also, the /SEN command is not implemented on CB.
- Have fun with this...hope it helps. Distribute the file however you want,
- but make sure the credits stay at the bottom.
-
- (c) 1986 Morgoth/Lotus
-
- ==============================================================================
-