home *** CD-ROM | disk | FTP | other *** search
-
- *^**^**^**^**^**^**^**^**^**^*
- * Motorola Cellular Software *
- * Instructions for Versions *
- * #1 and 2 *
- * Written By Task Man *
- * of the HIGH TECH HOODS *
- ******************************
-
- Ok well, I guess you have the Motorola Software that's why your reading this.
- Now let me stress to you this is for Versions 1 & 2.
-
- **Check which version you are using! Version #1 Software WILL NOT change
- phones with software versions higher than 9122!!
-
- **Version #2 (HTH-V2.EXE) will do ALL the New Phones with software later than
- 9122.
-
- So don't fuck up and hook up a new phone to the old software!!
-
- Now if you need the Hook Up instructions for the phones you should be able to
- get it the same place you got DownLoaded this file OR you can get it from
- The New York Hack Exchange BBS (718) 379-4702. The New York Hack Exchange is
- the only BBS that will get the Software & Updates before any other BBS.
-
- Following the directions, attach the phone to the cables. Make sure the phone
- is powered off, because the software will turn it on and begin reading the
- programed information.
- Once the phone is attached to the programming cables, and there is adequate
- power source (remember, don't turn the phone on) hit "ENTER" on your keyboard
- Now you'll get another box that will ask you the type of phone that you are
- programming.
-
- If you are programming a Motorola "FLIP" also known as the 550 line, of a
- Micro Tac portable, select "M"
-
- If you are programming an 8000 series, also known as the "Brick","Classic"
- or "Ultra Classic" then select "H"
-
- If you are programming any installed , bag or transportable Motorola phone
- then select "C"
-
- If you have established a successful connection, then the screen will let
- you know, and then using the tab key and arrow keys, you may select certain
- fields for editing. The most important fields are obviously the ESN and the
- MIN fields, with the "AID" used for the Home System I.D.
-
- Now you can type over the information you want changed, but remember to
- copy the original info. somewhere just in case you have to restore the phone
- back.
-
- The AOIC is usually the last number of your phone number, preceded by a
- Zero.
-
- If you don't become connected, the screen will tell you. Check your cables,
- your power source, and possibly your printer port.
-
- The following computers have trouble running the software:
- I.B.M.'s (The real ones not the clones)
- Compaq
- and 486's with over 25Mhz clock speed.
- Certain ports do not have the correct output, so if you are sure that your
- wiring is correct, move the software to another computer and try again.
-
- After the phone is successfully programmed the menu will say disconnect
- phone. Now you are ready to use your phone!!
-
- Remember, voltage is critical in programming phones. The cable MUST be built
- exactly as diagrammed, and the voltage supplied must be within the specified
- tolerance.
-
- NEVER REMOVE THE PHONE WHEN IT IS CALCULATING CHECK SUMS, OR BEING READ. THIS
- MAY PERMANENTLY DAMAGE THE PHONE BEYOND REPAIR.
-
- If you have any problems at all just leave me E-MAIL on:
- THE NEW YORK HACK EXCHANGE BBS (718) 379-4702 in the States
- OR THE HACK FACTORY +44PRIVATE in the U.K.
-
- Greets go to The RAVEN, V2 will work I did the Mods. myself! Even though it
- still has the 1991 file date!!
- Greets to Video Vindacator, I love your Mitsubishi File! I'll drop you a line
- soon. Leave me your Internet address on the Hack Exchange. P.S. where's
- Ersokose!?!
- LOOK FOR MORE CELLULAR SHIT FROM H.T.H.!!
-
- THE PUNISHER *HTH-UK*
-
-
-
-
-