home *** CD-ROM | disk | FTP | other *** search
- How to Box your own Conference Calls!
-
- Black Bart showed how to start a conference call thru an 800 exchange, and I
- will now explain how to start a conference call in a more orthodox fashion,
- the 2600 HZ. tone.
-
- Firstly, the phone company has what is called switching systems. There are
- several types, but the one we will concern ourselves with, is ESS (Electronic
- Switching System). If your area is zoned for ESS, do NO start a conference call
- via the 2600 HZ. tone, or Bell Security will nail your ass! To find out if you
- are under ESS, call your local business office, and ask them if you can get
- call waiting/forwarding, and if you can, that means that you are in ESS country
- and conference calling is VERY, VERY dangerous! Now, if you are not in ESS, you
- will need the following equipment:
-
- An Apple Cat II Modem
- A copy of TSPS 2 or Cat's Meow
- A touch tone fone line
- and a touch tone fone. (true tone)
- Now, with TSPS 2, do the following:
-
- RUN TSPS 2
- Chose option 1
- Chose option 6
- Chose sub-option 9
-
- Now type:
-
- 1-514-555-1212 (Dashes are not needed)
-
- Listen with your handset, and as soon as you hear a loud 'Click', then type
-
- $
-
- To generate the 2600 HZ. tone. This obnoxious tone will continue for a few
- seconds, then listen again and you should hear another loud 'Click'.
-
- Now Type:
-
- KM2130801050S
-
- Where 'K' = KP Tone
- 'M' = Multi Frequency Mode
- 'S' = S Tone
-
- Now listen to the handset again, and wait until you hear the 'Click' again.
- Then type:
-
- KM2139752975S
-
- Where 2139751975 is the number to bill the conference call to. Note: 213-975-
- 1975 is a disconnected number, and I strongly advise that you only bill the
- call to this number, or the Fone Company will find out, and then...
-
- Remember, conference calls are itemized, so if you do bill it to an enemy's
- number, he can easily find out who did it and he can bust you!
-
- You should now hear 3 beeps, and a short pre-recorded message. From here on,
- everything is all menu driven.
-
- Conference Call Commands
- ---------- ---- --------
-
- From the '#' Mode:
-
- ! = Call a number
- 6 = Transfer control
- 7 = Hangs up the conference call
- 9 = Will call a conference operator
-
- Stay away from 7 and 9! If for some fucked up reason an operator gets on-line,
- hang up! If you get a busy signal after KM2130801050S, that means that the
- teleconferencing line is temporarily down. Try later, preferably from 9AM to
- 5PM week days, since conference calls are primarily designed for business
- people.
- THE LEECH
-
-