home *** CD-ROM | disk | FTP | other *** search
/ The Hacker's Encyclopedia 1998 / hackers_encyclopedia.iso / hacking / voice / audexvp.txt < prev    next >
Encoding:
Text File  |  2003-06-11  |  19.2 KB  |  433 lines

  1. AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDE
  2. UDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX
  3. DEX-                                                                    DEX-
  4. EX-A                        HACKING GUIDE TO THE                        EX-A
  5. X-AU                                                                    X-AU
  6. -AUD                         AUDEX VOICE POWER                          -AUD
  7. AUDE                                                                    AUDE
  8. UDEX                             WRITTEN BY                             UDEX
  9. DEX-                                                                    DEX-
  10. EX-A                      --==>> CRAZYBYTE <<==--                       EX-A
  11. X-AU                                                                    X-AU
  12. -AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUD
  13. AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDE
  14. UDEX                                                                    UDEX
  15. DEX-                    CALL SIN CITY: +32-3-8252274                    DEX-
  16. EX-A                                                                    EX-A
  17. X-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AU
  18. -AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUDEX-AUD
  19.  
  20.  
  21.  
  22.  
  23. /\/--> DISCLAIMER <--\/\
  24. ------------------------
  25. Ohooh... I'm scared as shit so I accept no responsibility for any actions
  26. taken by readers... blahblah NOOOOOOO...
  27. This text is written with the intention that readers of this text hack
  28. Audex Voice Power vmb's, and I sure as hell hope that as from now on every
  29. fucking Audex Voice Power in the galaxy gets abused by hackers.
  30.  
  31.  
  32.  
  33.  
  34. /\/--> INTRODUCTION <--\/\
  35. --------------------------
  36. The Audex Voice Power is the predecessor of the Audex we all know just under
  37. the name Audex today. There aren't that much of this older system around,
  38. but the few I found were fucking easy to hack. And again: vmb's are fun to
  39. have, you can trade them for xxx (fill this in), they lower your phone
  40. bill,... (you've heard this shit before).
  41. Anyway, lets get down to business...
  42.  
  43.  
  44.  
  45.  
  46. /\/--> IDENTIFYING THE AUDEX VOICE POWER VMB <--\/\
  47. ----------------------------------------------------
  48. Well, you can't recognize them from the first greeting, but the greeting
  49. will probably contain the usual 'press the ext. of the person you want to
  50. reach' and the (special for Audex Voice Power) 'if you want to transfer
  51. using names instead, press the pound (#) key'.
  52. To REALLY be sure it's an Audex Voice Power: press *7, if it responds with:
  53. 'Welcome to Audex Voice Power, please enter extension and # sign' you've
  54. got yourself an easy-to-hack Audex Voice Power vmb.
  55.  
  56.  
  57.  
  58.  
  59. /\/--> LOGGING IN <--\/\
  60. ------------------------
  61. Press *7, you are asked to enter your box number, these are can be 3 or 4
  62. digits, but I haven't found a mixture of the two on one system so far.
  63. After you've entered the box number, press #, enter your password and press
  64. # again. If you entered and incorrect box number or password, it will say
  65. 'Login incorrect, please try again,...'. On the systems I found you could
  66. try 4 times to login before you get disconnected. When you get disconnected
  67. it will say: 'Contact administrator for help, please disconnect... goodbye'.
  68.  
  69.  
  70.  
  71.  
  72. /\/--> FINDING A VALID BOX AND PASSWORD <--\/\
  73. ----------------------------------------------
  74. The boxes are grouped, and they will usually be in 2XX or 2XXX. The default
  75. password is the same as the box number, just like on allmost all other VMB
  76. systems.
  77.  
  78. There are two easy ways to find boxes (and one difficult, and another one
  79. if you really want a box but had extremely bad luck):
  80.  
  81. 1. On the two systems I'm using right now, the attendant-extension (0)
  82.    has 0 as password, and on one of those two, the options at the login-menu
  83.    have also got the same password as their extension number (1 for xxx, 2
  84.    for yyy,...). So first thing to do is trying 0 -> 9, if you can't get in
  85.    with these, read 2.
  86.  
  87. 2. So you couldn't get in by trying extensions 0 -> 9.
  88.    Most systems have a directory where you can transfer to people's
  89.    extensions by entering the first letters of their last name.
  90.    To find the directory, just listen to the first greeting you hear when
  91.    you call the VMB. (you know, 'welcome to xxx... if you need assistance
  92.    press 0, otherwise press the extension of...'). Usually you have to
  93.    press # at the login menu. Now, when you enter the directory option,
  94.    the system will respond with: 'Please enter the last name of the person
  95.    you want to reach'. Don't enter a complete name, just press 5 or somtehing
  96.    and the # sign. By the way: lots of VMB systems have some sort of
  97.    directory, and allmost every VMB system I found had users with last names
  98.    'Smith' or 'Jones' (some popular names in the US, and characters from a
  99.    stupid TV series). Well, lets continue with Audex Voice Power. After you've
  100.    pressed #, the system will say 'to select blahblah press x' and will
  101.    start saying names. Now a lot of users also say their box number, so
  102.    a lot of these names will be like 'John Doe, extension xxxx'. Just
  103.    write these down. If you found how many digits the box numbers are,
  104.    and where they are grouped, hang up and call again.
  105.    Now start trying the box numbers you just found, you probably will get
  106.    in using the box number as password the 2nd or 3rd time you call, since
  107.    a lot of people don't use their VMB's, or don't know shit about it, so
  108.    haven't changed their password.
  109.  
  110. 3. Couldn't get in with one of the above methods ? Never happened to me,
  111.    but I guess it's possible. Here's what I would do in such a situation.
  112.    Don't use the login (*7) options to scan for boxes because then you don't
  113.    even know if it's a valid box. Just transfer to them from the main menu,
  114.    so you know how much digits the boxes are, and where they're located
  115.    (since they 'live' in groups). There's a 90% chance the boxes are located
  116.    in 2xx(x). If you entered an invalid box number, it will first try to
  117.    transfer you, and then it will say something like 'your transfer couldn't
  118.    be completed'. Since you don't have to press # after entering an extension
  119.    to transfer to, it's possible that f.e. after pressing only one digit you
  120.    will get transfered (read point 1 of this paragraph). When you've located
  121.    an area that contains lots of valid extensions, try to hack a box in that
  122.    area with the login (*7) option.
  123.  
  124. 4. Still didn't find a box ??? Well, the best thing you could do in this
  125.    case is bullshit to the operator. If you couldn't find the area that
  126.    contains the boxes, and there's no directory, ask her for the extension
  127.    of f.e. Smith and say you don't know anything else about this Smith.
  128.    If bullshitting the operator didn't work either, just try to transfer to
  129.    an extension, and ask the person that picks up the phone for their
  130.    password. You could say that you're from maintenance, and are installing
  131.    a new option in the boxes so that people are able to use outside lines
  132.    from within their boxes or something.
  133.  
  134. 5. You still couldn't get a box ? Well, give up on this system and scan for
  135.    another VMB system. I NEVER found a system I couldn't get a box after
  136.    about ten minutes using the method in points 1 and 2 so you are trying to
  137.    hack a system that has allready been badly abused by hackers or otherwise
  138.    you are EXTREMELY dumb.
  139.  
  140.  
  141.  
  142.  
  143. /\/--> OK, YOU'RE IN A BOX, WHAT NOW ??? <--\/\
  144. ------------------------------------------------
  145. Well, use press 2 to listen to the messages, but only listen to the dates they
  146. were created. So press # every time to skip to the next message.
  147. If it contains new messages from 3 months ago, then it means that the legit
  148. user didn't use his box in 3 months. You can safely listen to the messages
  149. and use this box without the risk of loosing it in 2 days.
  150. If it contains no messages it could be possible that the user checks the VMB
  151. regulary, or that it has never been used in which case you got yourself a
  152. good box again. There's no quick way to find out if it's unused or often used
  153. in this case, just use this box to scan for other ones (look below), or check
  154. regulary if there are new messages and if they get deleted afterwards.
  155.  
  156.  
  157.  
  158.  
  159. /\/--> SCANNING FOR OTHER BOXES <--\/\
  160. ---------------------------------------
  161. There are different ways of scanning for other boxes, but the quickest is
  162. the following:
  163. First choose option 5 from the main menu, then press 1 to create a
  164. distribution list. You will be asked for an ID for the list, just press 1
  165. or something followed by #. Now start entering box numbers, followed by #.
  166. If the box is valid, the system will respond with the name of the owner, or
  167. when you're lucky, the system will sa: 'Extension xxx', in which case you
  168. should write the number down because you've got a 99% chance this is an
  169. unused box. If the box is not valid, the system will say 'Extension xxx not
  170. valid'. When you've collected some numbers, press *# and then *3 to delete
  171. the list. Now hang up, call again and try what boxes have the same passwords
  172. as their box numbers.
  173.  
  174.  
  175.  
  176.  
  177. /\/--> OPTIONS AND COMMANDS <--\/\
  178. ----------------------------------
  179. From the main menu you've got the following options:
  180.  
  181. 1.  Record a message
  182. 2.  Listen to messages
  183. 3.  Administer name or greeting
  184. 5.  Administer password and distribution lists
  185. 6.  Change outcalling info (INTERESTING)
  186. *8. Transfer to another extension
  187.  
  188.  
  189.  
  190. 1. RECORDING MESSAGES : 
  191.  
  192.       You will hear a beep, record your message after the beep. When
  193.       finished recording, press 1. Now you've got the following options:
  194.  
  195.          21: Re-record : Your message will be deleted and you can record
  196.                          it again.
  197.  
  198.          23: Playback  : Just as it says: your just-recorded message will
  199.                          be played back.
  200.  
  201.          *3: Delete    : Your message will be deleted
  202.  
  203.          *#: Approve   : Now enter the boxes you wish to send your message
  204.                          to, followed by #. When finished type *#. To delete
  205.                          the last entry (box), type *3.
  206.  
  207.  
  208. 2. LISTENING TO MESSAGES :
  209.  
  210.       When there are no messages, you will go back to the main menu.
  211.       Otherwise you will hear the date and time the actual message was
  212.       delivered, and the name (if specified) of the sender.
  213.       Options:
  214.  
  215.          0 : Listen : Listen to actual message
  216.              While listening you can use these commands:
  217.                2 : Rewind message. If you press it again you will go to
  218.                    the previous message.
  219.                3 : Pause. Press 3 again to continue playing.
  220.                5 : Rewind and play
  221.                6 : Goto end of message
  222.  
  223.          # : Skip   : go to next message
  224.  
  225.          *3: Delete : actual message will be deleted
  226.  
  227.          1 : Respond/forward message
  228.                1 : Reply      : Send an answer to the sender
  229.                2 : Forward    : Record a comment before the message and send
  230.                                 it to someone else.
  231.                4 : Record new : Record a new message. This does exactly the
  232.                                 same as option 1 from the main menu.
  233.  
  234.  
  235. 3. ADMINISTERING OF NAME AND GREETING :
  236.  
  237.       This submenu will enable you to record name and greeting, and to
  238.       specify what greeting will be used.
  239.       Options:
  240.  
  241.          1 : Greeting : The message that will be heard whenever someone
  242.                         wants to leave a message in your box.
  243.                1 : Record : Record after the beep the greeting that should
  244.                             be played. Press 1 to end recording.
  245.                2 : Listen : Listen to your greeting.
  246.                *#: Select which greeting should answer.
  247.                      9 : Personal greeting.
  248.                      6 : Standard system greeting.
  249.  
  250.          2 : Name     : The message that is heard when someone sends or
  251.                         reveices messages to/from your box.
  252.                0 : Listen : Listen to name.
  253.                1 : Record : Record name.
  254.   
  255.  
  256. 5. CREATING DISTRIBUTION LISTS AND CHANGING YOUR PASSWORD :
  257.  
  258.       Distribution lists are used when you regulary need to send messages to
  259.       several people, and don't want to waste time with typing all their
  260.       boxes.
  261.  
  262.          1 : Create : Creates a new distribution list. First you will be
  263.                       asked for an ID for the list. Now enter f.e. 1 followed
  264.                       by #. You can now enter a box number followed by #,
  265.                       repeat this untill you inputed all the box numbers for
  266.                       the distribution list. If you entered a wrong number,
  267.                       just press *3 to delete the last entry. When finished
  268.                       press *#.
  269.  
  270.          2 : Scan   : With this option all distribution lists ( If you got
  271.                       any ) will be said, and after saying the ID of the
  272.                       list, you've got the following options:
  273.                *3: Delete : Delete this distribution list.
  274.                # : Skip   : Go to the next distribution list.
  275.  
  276.          3 : Review : This option will allow you to change other users' or
  277.                       your own distribution lists. First enter the box number
  278.                       followed by #, or for your own box, just press #.
  279.                       Now enter the ID of the distribution list followed
  280.                       by #. The system will say how much entries there are in
  281.                       the list, and name them one by one, giving you the
  282.                       following options after naming each entry:
  283.                # : Skip   : Go to the next box.
  284.                *3: Delete : Delete this box.
  285.                1 : Add    : Add a box.
  286.                *#: Quit   : Stop review of the entries in the list.
  287.  
  288.          4 : Change PW : Enter your new password followed by #. After
  289.                          entering it, you have to enter it again followed
  290.                          by # to check if you didn't enter it wrong the
  291.                          first time. The password can be 1 till 9 digits.
  292.                          If you just press # when you're asked to enter it,
  293.                          no passwords will be assigned to your box.
  294.  
  295.  
  296. 6. CHANGE OUTCALLING INFORMATION :
  297.  
  298.       The outcalling option is quite fun. Not everyone is allowed to do it,
  299.       but if you find boxes allowing outcalling, you can use them to call
  300.       friends, boards or even alliance... I wouldn't suggest putting your
  301.       own number there, but it would be quite fun that when someone calls
  302.       you up using the VMB (on a tollfree number ???), and you don't answer,
  303.       he can leave a message and stuff...
  304.  
  305.       Options:
  306.  
  307.          1 : Change  : Enter the number your calls should be transfered to,
  308.                        followed by #. To exit press *#.
  309.  
  310.          3 : Info    : Will give you instructions on how to enter the number
  311.                        with option 1. If you want to insert a pause in the
  312.                        dial string, use * to pause for 4 seconds. If your
  313.                        number needs to be ended with a #, start your dialing
  314.                        string with ##. Normally you can't end with a #
  315.                        because if you do that, the system thinks that it's
  316.                        the end of the dialing string. This is usefull for
  317.                        pagers and other stuff (use your imagination).
  318.  
  319.          6 : Disable : Turn outcalling off.
  320.  
  321.          9 : Period  : Specify the outcalling period.
  322.                1 : Outcalling allowed during the system administration hours.
  323.                    F.e.: Only between 8 AM and 6 PM.
  324.                2 : Outcalling allowed 24 hours a day.
  325.  
  326.  
  327.  
  328.  
  329. /\/--> GREETINGS <--\/\
  330. -----------------------
  331. And last but not least some greetings to:
  332. (A-Z to avoid 'why did ya put X before me ?')
  333.  
  334.  
  335. Analog:        Forget that I told you to kick off Flaming Chaos as a CO.
  336.                Making a new BBS proggy ?
  337.  
  338. Apollo:        Hope your exams are better than mine... nice talking to ya
  339.                over the VMB.
  340.  
  341. A.R.U.P.:      For having such a nice and virgin Audex Voice Power VMB.
  342.  
  343. Cops (the):    FUCK OFF !!! I EXTREMELY HATE ALL COPS... I WOULD KILL ALL
  344.                COPS IF I HAD THE CHANCE (same goes for all kind of security
  345.                personnel and the endless amount of lamers on this planet).
  346.  
  347. Donald Duck:   Where R you ? Is your girlfriend SO interesting ? We miss
  348.                your expertise...
  349.  
  350. Einstein:      You're lame and you know it. Hah, I puke on guys like you.
  351.                I'm not a violent guy, but I swear I'll smash your head when
  352.                I ever meet you.
  353.  
  354. Flaming Chaos: Sorry I offended you dude, but I didn't know about that '|',
  355.                so I thought the message was specifically written for me.
  356.  
  357. Invalid Media: Quite nice board... too bad you had to make it codefree.
  358.  
  359. Jules:         Your board is OK, but why is it down so much ?
  360.  
  361. Larry:         You're a lamer and your problem is that you won't admit it.
  362.  
  363. Oink:          Hmmm... so you agree that HP3000's are Boooring... Unixes are
  364.                1000 times more phun...
  365.  
  366. Ralph:         Been fucking around on the nets lately ???
  367.  
  368. Sintax:        Happy now that I put some greets in ? Don't you ever get bored
  369.                of CIS ?
  370.  
  371. Slycath:       Nice texts, continue your good work...
  372.                btw: I LUV Robbie Robot... (and his frog puppet)
  373.  
  374. Predat0r:      Your board is the living proof that a board doesn't need an
  375.                HST to be one of the best.
  376.  
  377. Thor:          How is army ? Why don't you do something usefull while you're
  378.                there and look for their computer dialups (if they're using
  379.                any (hehe)).
  380.  
  381. Trap Zer0:     Nice texts about the VMB's. Getting active again ?
  382.  
  383. Vinny:         You probably won't read this, hehe... your handle is with 'V'
  384.                so you're last... anyways, THANKS for everything you 'teached'
  385.                me, THANKS for the job you can get me, GOOD LUCK with the PC.
  386.  
  387. ???:           To all guys who call me when I'm sleeping: FUCK OFF.
  388.  
  389.  
  390. And... to all guys I forgot and also the few cool guys I know among all the
  391. lamers in the lame Amiga scene. Only greets here to guys I know involved
  392. in HPA, this will be the first and the last time I put up such a greetings
  393. list...
  394.  
  395.  
  396.  
  397.  
  398. /\/--> RECOMMENDED READING <--\/\
  399. ---------------------------------
  400.  - All texts about Night Ranger, he's the VMB expert.
  401.  - Texts about Aspen and Cindi systems written by Slycath.
  402.  - Texts about the IADS and Message Centers by Trap Zer0.
  403.  - Ofcourse all texts written by me (hehe).
  404.  
  405.  
  406.  
  407.  
  408. /\/--> OTHER TEXTS WRITTEN BY ME <--\/\
  409. ---------------------------------------
  410.  - Unix command overview
  411.  - Hacking Meridian Mail
  412.  - HP3000 quick command reference
  413.  
  414.  
  415.  
  416.  
  417. /\/--> TEXTS TO WATCH OUT FOR <--\/\
  418. -------------------------------------
  419.  - Maybe a text about the IADS coz I think it's the best VMB ever made.
  420.  - Text about Audex (the new Audex Voice Power system).
  421.  - Probably some texts about hacking Unix or the MPE XL or V OS on HP3000's.
  422.  
  423.  
  424.  
  425.  
  426. L8R ALLIG8R
  427.  
  428. User CRAZYBYTE ending interactive session at 17:02.
  429.  
  430. NO CARRIER
  431.  
  432.  
  433.