home *** CD-ROM | disk | FTP | other *** search
- Telenet The Secret Exposed...
-
- For years, people and myself, have offtend tried to"work telenet unto acoma..
- With no success, for the pest few years, i have gathered data, and final
- know the system, its faults, capabilities, and errors.
- This really sxould be in a text, file, but. i wish this information, to
- be reserved for the few users on this system.
-
- before i start. here are a few basic commands, to get famialir with:
-
- Execution syntax of command function
- ------------------------------------------------------------------------
-
- Connetc c (sp) Connects to a host (opt)
-
- Status stat Displays network port add
-
- Full-Duplex full network echo
-
- Half-Duplex half Termnial echo
-
- Mail
- or
- Telemail mail telemail telemail
-
- set Parmaters set (sp) 2:0,3:2 Select Pad Parameters
-
- Read Paramaters par? par?(sp)2:0,3:2 display pad
-
- Set and read
- Paramaters set?(sp)2:0,3:2
-
- escape @ escape from data modew
-
- File Trasnfer dtape Prepares network for bulk
-
- continue cont
-
- disconnect bye or d
-
- hang up hangup
-
- terminial term(sp)d1 Set TERM
-
- test
-
- test(sp)char
-
-
- test(sp)echo
-
-
- test(sp)triangle
-
-
- this is the end of the commands, view next msg for useage:
-
- Trap and pipe x.25 prot. (telenet)...
-
- Pleasse note this is a very difficult transaction... The following
- flow chart, will only work on a machine with atleast 10 Mhz..
- However, an account on a unix, with cu capabilities will also work..
-
- Package networking, is exactly what it means..
- before, i go into detail, let me give you and over view...
-
-
-
- -------------
- Host
- -------------
- !
- !
- !
- !
- -----------------
- telenet, remote
- $ divertor, and
- pacakge.
- ------------------
- !
- !
- ---------------------
- ! ! ! !
- ! ! ! !
- u u u u
- s s s s
- e e e e
- r r r r
- s s s s
-
- If you notice carefully, there is online to the host and 4 users.
- That is how its packaged, for instance the first 100 mills. will be
- from user on then two etc.. The way telenet can tell which is user
- is which, is simply by the time. Time is of the essense. data is
- constantly been packed, anywhere from 100 mils. to 760 mils.
- The trick to trap tapping and piping, a lead off of telenet, is to have
- as system running four proccewss and the same time, and have a master prgm.
- that switch's at the appropriate delays... As you can see this is
- where a 10 Mhz + system, is needed.
-
- On the host end.
-
- The host end consists of three things..
-
- 1) 9600 baud modem
-
- 2) a dedicated telcue line
-
- 3) a network pad..
-
- I doubt know one needs a lesson on the first two, but lets take a look
- at telenets, "weakest" link..
-
- Network Pad
- ----------
-
- There are three types of network pads a 4 pad 12 pad and 32 pad
- They really do not make a diffrence, it only changes the amount
- of users, capable of using on line..
-
- example. if you have a 4 network pad. you system will be able to handle
- four users from telenet etc...
-
- The network pad is Such a piece of"shit you have know idea..
-
- All parameters are set remotly by a telenet eng..
-
- This is important...
-
- If the pad is every shutoff all parameters are lost.. and an eng. must
- reload the pad.. (again, this is done remotly)
-
- to give you a small ifea, of$the amount of programing in thms pad
- (which i might add has over 2 megs of internal RAM)
- for an eng. to upload it ct 9600 bps.. it took approx 38 mins.
-
- The Pad is not a computer, if ytou think about it though, if your
- traveling at 1200 on telenet, your actually travling at 9600 and
- back to 1200.. when x.25 is unpacked..
-
- How is the pad set remotly..
-
- lets take an example...
-
- c 2122
-
- now c 2122 /(?this is an example)
-
- ha four nodes its a siml divester to the next node. however you can
- specify, the node you want
-
- c"212.01
- c 212.02
- etc....
-
- nodes can also"be stated as 2122a is the same as "2122.01
- and 2122.03 is the same as 2122c
-
- Now that we know how to access the indiv. nodes. let me show you a small
- secret...
-
- Theres a programing node.. so an eng. can upload, to your network pad..
-
- every address has it...
- it always ends in 99
-
- so, if i wanted to trap and tap c 2122
-
- i would enter c 2122.99
-
- you would get a connected.. but is you notice nothin happens..
-
- at this point do not touch any keys.. a wrong key stroke, will
- most likely alert someone to your tampering..
- (dont forget, all network pads have a direct alarm signle.. so follow my
- directions to the t...
-
- enter in :
-
- @
-
- with out a return.. you should get telenet
- @
-
- if you dont give it a min. then hit return. your actually there.
- but the prompt, just didnt print..
- ok..
-
- Now type
-
- set 15:0
-
- when entered.. hold 15 secs.. for a time delay..
-
- then type in cont
-
- to continue, with the host you brokg from.....
-
- you will get a message:
-
- TP3005 DEBUG PORT V5.37.03
- >
-
-
-
- your now, directly accessed the network pad..
-
-
- Please note some of these have passwords:
- However
- if your prompted for a password, of if nothing happens:
- telenet has two standard passwords:
- superman
- represeting a male tech.
- and
- $ wonderwomen
- repre. a woman tech..
- when in your prompt is$allways a greater than sign:
- >
-
- type the following:
-
- 7FDS
- HIT RETURN
-
- youll get a responce: $ E 01
-
- NOW TYPE IN:
- L7FE,L,A2,R2,D
-
- then youll get a message: R 00A626 8805
-
- now enter ing: 40588
-
- YOUR RESPONCE WILL BE : E 01
-
- write now you should open atleast a 640K buffer.....
-
- now type in > R0589
-
- YOULL GET A WHOLE LIST OF DATA THAT IS CURRENTLY CROSSING THE PADS
- DUPLX.
- ON LINE WILL LOOK LIKE THIS:
-
-
-
- R 00A625 06805FF17068703 1287100230050540 0000000000000000 FF020101000000
-
- ■"&]%%+f! ! )19AIQYai
-
-
-
- It seems that not many of you know that Telenet is connected to about 80
- computer-networks in the world. No, I don't mean 80 nodes, but 80 networks
- with thousands of unprotected computers. When you call your local Telenet-
- gateway, you can only call those computers which accept reverse-charging-calls.
- If you want to call computers in foreign countries or computers in USA which
- do not accept R-calls, you need a Telenet-ID. Did you ever notice that you can
- type ID XXXX when being connected to Telenet? You are then asked for the
- password. If you have such a NUI (Network-User-ID) you can call nearly every
- host connected to any computer-network in the world. Here are some examples:
- 026245400090184 is a VAX in Germany (Username: DATEXP and leave mail for
- CHRIS !!!)
- 0311050500061 is the Los Alamos Integrated computing network (One of the
- hosts connected to it is the DNA (Defense Nuclear Agency)!!!)
- 0530197000016 is a BBS in New Zealand
- 024050256 is the S-E-Bank in Stockholm, Sweden (Login as GAMES !!!)
- 02284681140541 CERN in Geneva in Switzerland (one of the biggest nuclear
- research centers in the world) Login as GUEST
- 0234212301161 A Videotex-standard system. Type OPTEL to get in and
- use the ID 999_ with the password 9_
- 0242211000001 University of Oslo in Norway (Type LOGIN 17,17 to play
- the Multi-User-Dungeon !)
- 0425130000215 Something like ITT Dialcom, but this one is in Israel !
- ID HELP with password HELP works fine with security level 3
- 0310600584401 is the Washington Post News Service via Tymnet (Yes, Tymnet
- is connected to Telenet, too !) ID and Password is: PETER
- You can read the news of the next day !
-
- The prefixes are as follows:
- 02624 is Datex-P in Germany
- 02342 is PSS in England
- 03110 is Telenet in USA
- 03106 is Tymnet in USA
- 02405 is Telepak in Sweden
- 04251 is Isranet in Israel
- 02080 is Transpac in France
- 02284 is Telepac in Switzerland
- 02724 is Eirpac in Ireland
- 02704 is Luxpac in Luxembourg
- 05252 is Telepac in Singapore
- 04408 is Venus-P in Japan
- ...and so on... Some of the countries have more than one packet-switching-
- network (USA has 11, Canada has 3, etc).
-
- OK. That should be enough for the moment. As you see most of the passwords
- are very simple. This is because they must not have any fear of hackers. Only
- a few German hackers use these networks. Most of the computers are absolutely
- easy to hack !!!
- So, try to find out some Telenet-ID's and leave them here. If you need more
- numbers, leave e-mail.
- I'm calling from Germany via the German Datex-P network, which is similar to
- Telenet. We have a lot of those NUI's for the German network, but none for
- a special Tymnet-outdial-computer in USA, which connects me to any phone #.
-
- CUL8R, Mad Max
-
- PS: Call 026245621040000 and type ID INF300 with password DATACOM to get more
- Informations on packet-switching-networks !
-
- PS2: The new password for the Washington Post is KING !!!!
-
-