home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
UPCHECK
/
PCBUT142.ZIP
/
PCBULT14.DOC
< prev
next >
Wrap
Text File
|
1993-12-03
|
76KB
|
2,078 lines
╔══════════╗╔═════════╗╔═════════╗ ╔════╗ ╔════╗╔════╗ ╔══════════╗
╚╗ ╔═══╗ ║║ ╔════╗ ║╚╗ ╔═══╗ ╚╗╚╗ ╔╝ ╚╗ ╔╝╚╗ ╔╝ ║ ╔═╗ ╔═╗ ║
║ ║ ║ ║║ ║ ╚═╝ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ╚═╝ ║ ║ ╚═╝
║ ╚═══╝ ║║ ║ ║ ╚═══╝ ║ ║ ║ ║ ║ ║ ║ ║ ║ TM
║ ╔══════╝║ ║ ║ ╔═══╗ ║ ║ ║ ║ ║ ║ ║ ║ ║
║ ║ ║ ║ ╔═╗ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ╔═╗ ║ ║
╔╝ ╚╗ ║ ╚════╝ ║╔╝ ╚═══╝ ╔╝ ║ ╚═══╝ ║ ╔╝ ╚═══╝ ║╔╝ ╚╗
╚════╝ ╚═════════╝╚═════════╝ ╚═════════╝ ╚═════════╝╚════╝
UPLOAD FILE TESTING AND CONVERSION UTILITY FOR PCBOARD v14.x - 15.x
Copyright 1993 by FeatherNet Software, Inc. All Rights Reserved
FeatherNet Software, Inc.
PCBULT Upload File Testing and Conversion Utility
Version 1.42
Documentation Revision 1.42a
For the IBM-PC XT/AT and 100% Compatibles
Copyright (c) 1993 FeatherNet Software, Inc.
Fast Support
(813) 249-8322 Voice : M-F 9-5 Eastern
(813) 249-8422 BBS : 24 Hours a Day!
PCBULT - PAGE 2
Information in this manual is subject to change without notice &
does not constitute or represent a commitment on the part of
FeatherNet Software, Inc. The Software, documentation, and all
information described in this document is furnished under agree-
ment or nondisclosure agreement and may be used or copied only in
accordance with the terms of the agreement. It is against the law
to copy the Software and/or documentation except as specifically
stated in the license or nondisclosure agreement.
(c) 1993 FeatherNet Software, Inc. All Rights Reserved.
FeatherNet Software, Inc. is a U.S. Corporation based in Florida.
PCBULT and all other FeatherNet Software products are proudly
designed, programmed, and supported in the
United States of America.
PCBULT, FeatherNet PRO!, and FeatherNet are trademarks (TM) of
FeatherNet Software, Inc.
PCBoard is a reg. trademark of Clark Development Co., Inc.
All other trademarks which may be used within this document,
whether directly or indirectly, are the property of their
respective owners. Their use in this documentation does not
suggest or constitute an attempt by FeatherNet Software, Inc.
to claim them as their own, nor does FeatherNet Software, Inc.
specifically endorse or suggest the use of these products or
services.
PIRATING IS STEALING! If someone gives you their registration
code and you decide to run the Software with it, remember, all
of us here at FeatherNet Software do this for a living and when
you or others steal our hard work, one of our children may have
just gone without a new pair of shoes or may not have seen the
dentist because of your thoughtlessness. We provide quality
products at a great price, if you do not feel this is the case,
please do not use the Software!
PCBULT - PAGE 3
╔═══════════════════════════════════════════════════════════════╗
║ TABLE OF CONTENTS ║
╚═══════════════════════════════════════════════════════════════╝
INTRODUCTION................................................ 4
COPYRIGHT NOTICE............................................ 5
LICENSE AGREEMENT........................................... 6
LIMITED WARRANTY............................................ 9
SHAREWARE DISTRIBUTION...................................... 10
REQUIRED PRE-CONDITIONS..................................... 11
INITIAL SETUP............................................... 12
CREATING OR EDITING A CONFIGURATION FILE.................... 13
COMMAND LINE OPTIONS FOR PCBULCFG........................... 14
USING PCBULCFG - PCBULT'S CONFIGURATION EDITOR.............. 15
SAVING TO CONFIGURATION..................................... 22
MINIMUN .GIF RESOLUTION & COLORS YOU WILL ALLOW UPLOADED....
SETTING UP PCBTEST.BAT...................................... 23
OPERATION OF PCBULT......................................... 24
RUNNING PCBULT FROM THE LOCAL CONSOLE....................... 24
REGISTRATION OF PCBULT...................................... 25
SUPPORT..................................................... 25
UPGRADES.................................................... 26
REGISTRATION AGREEMENT FORM................................. 27
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 4
╔═══════════════════════════════════════════════════════════════╗
║ INTRODUCTION ║
╚═══════════════════════════════════════════════════════════════╝
PCBULT will test archives for integrity, Scan for virus' using
any scan utility, such as McAfees SCAN.EXE (or other quality
virus detection utilities), and will optionally test your .GIF
files for integrity and ensure files meet your age requirements.
Among some of the major features of this product we draw your
attention to the following;
* Identifies and processes all ZIP, ARJ, LHA, GIF and TD0
files regardless of the actual file extension. This
includes Self- Extracting archives.
┌─────────────────────────────────────────────────────────────┐
│ IF More archive types are desired we will add them. The │
│ above are generally considered the main stream archive and │
│ file types. │
└─────────────────────────────────────────────────────────────┘
* Supports the use of FILE-ID.DIZ and DESC.SDI description
files in an archive. PCBULT will replace the description
with the contents of FILE_ID.DIZ or DESC.SDI respectively.
* Moves all Virus Infected programs into a Virus Holding
Directory the Sysop has defined.
* Will save descriptions of rejected files in the current
conference's PRIVATE upload description file.
* Will delete all files names located in a text file if
those names appear in the archive.
* Optionally will test .GIF and .TD0 files for integrity
using the file tester available for Teledisk'd files
(TDCHECK.EXE). GIF testing is performed internally.
* Optionally limit .GIF resolution and colors.
* Optionally Inserts the number of files in the archive,
Oldest file date and Newest file date into the
file description. Adds .GIF resolution to .GIF file
descriptions (1st line if possible or last line/new line).
* PCBULT will optionally SWAP itself to EMS, XMS or DISK
when running the archive and swap utilities to make as
much room as possible available for these programs. When
swapped, PCBULT will leave a 2k Kernel in DOS Ram.
* Includes an easy to use and informative configuration
program. (PCBULCFG.EXE)
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 5
╔═══════════════════════════════════════════════════════════════╗
║ INTRODUCTION - Continued ║
╚═══════════════════════════════════════════════════════════════╝
* Allows the SysOp to append a 7 line display file to the
PCBULT caller display information screen.
* IS in NO WAY CRIPPLED or KEYED! PCBULT is 100% function-
able as recieved.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 6
╔═══════════════════════════════════════════════════════════════╗
║ COPYRIGHT NOTICE ║
╚═══════════════════════════════════════════════════════════════╝
PCBULT Upload File Tester and Converter with all of it's
Associated materials are copyright (c) 1993 by FeatherNet
Software, Inc. All rights reserved. PCBULT(tm) is a trademark
owned and protected by FeatherNet Software, Inc. This document
is copyright (c) 1993 by FeatherNet Software, Inc.
The look, see, feel, and structure of this program is uniquely
designed and any similarity between it and any other program is
unintentional.
PCBULT shall under no circumstances be considered in the Public
Domain. FeatherNet Software, Inc. holds and protects all copy-
rights on it's products. Copying, duplicating, selling, or
otherwise, in any way distributing the registered version of any
of FeatherNet Software, Inc.'s products is a violation of the
law.
If you are currently TESTING the SHAREWARE version, you may do
so for a REASONABLE period (30 days and no longer is considered
reasonable) after which time you should register the program or
discontinue its use. If you continue to run the shareware
version longer than thirty (30) days you shall be considered in
violation of FeatherNet Software, Inc. copyright and in violation
of the law.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 7
╔═══════════════════════════════════════════════════════════════╗
║ LICENSE AGREEMENT ║
╚═══════════════════════════════════════════════════════════════╝
IMPORTANT! Please read this entire section before you run this
SHAREWARE version of PCBULT. By running the Software you
acknowledge your agreement to the terms of this license.
DEFINITIONS;
The term "Software" as used in this license agreement, the dis-
claimer, and (c) copyrights notice, all within this documentation
means the FULL SYSTEM AND ALL UTILITY COMPUTER PROGRAMS con-
tained in the distribution archive, together with any upgrades or
updates subsequently supplied by FeatherNet Software, Inc.
The term "Author" as used in this license agreement, the dis-
claimer, and (c) copyright notice, all within this documentation
means FeatherNet Software, Inc. and it's principal officers.
The term "User" as used in this license agreement, the dis-
claimer, and (c) copyright notice, all within this documentation
means the person or entity that has licensed the Software for
use. (You! The SYStem OPerator.)
The term "Copies" means the actual copies of any portion of or
all of the Software, including back-ups, updates, merged or par-
tial copies permitted hereunder or subsequently supplied by
FeatherNet Software, Inc.
The term "Associated Materials" means all the printed materials
provided in this package or subsequently supplied by FeatherNet
Software, Inc. for use with the Software. This also applies to
any unprinted ASCII files which may appear on the diskette(s)
with last minute release notes or other Associated information.
PERMITTED USES;
You may use the Software on a single computer or on multiple
computers that are connected via a physical cable to the same
network server. This is specifically includes single computers
and local area networks (LANS) connected without the use of
telephony or modulation/demodulation (MODEM) equipment. The
use of this software on a Wide Area Network (WAN), specifically
those networks connected using Satellite, Radio, or Telephony
Carrier is prohibited under this license but may be obtained
under other licenses offered by FeatherNet Software, Inc.
You may install the Software onto a semi-permanent storage device
(a hard disk drive or floptical diskette drive). You may make
one working copy of the Software. If the working copy becomes
corrupted and/or will not longer work properly, the User is
granted permission to make another single copy of the Software
diskette(s) after the original working copy is destroyed.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 8
╔═══════════════════════════════════════════════════════════════╗
║ LICENSE AGREEMENT - Continued ║
╚═══════════════════════════════════════════════════════════════╝
This license gives you certain limited rights to use the
Software. You do not become an owner of the Software.
FeatherNet Software, Inc. retains title to all the Software,
Copies, and Associated Materials. In addition, you agree to use
reasonable care to protect the Software from unauthorized use,
reproduction, distribution, or publication. All rights not
specifically granted in this license are reserved by FeatherNet
Software, Inc. You are granted a personal non-exclusive, non-
transferable license to use the enclosed program and document-
ation solely for your own internal needs on one central proces-
sing unit or network of physically connected computers. You
assume the entire responsibility for the selection of the program
to achieve your intended results, and for the installation, use
and results obtained from the program.
YOU MAY;
Use PCBULT, it's documentation, and related materials on a single
computer system or on a network of physically connected computers
of your belonging. If you wish to run the program on more than
one computer not connected to a network, you must request a multi
user license.
Copy the program for back-up and archive purposes only, or copy
the program to other computers of your belonging for use on a
network of physically connected computers.
Upload copies of PCBULT SHAREWARE VERSION ONLY to any BBS
provided that you upload the *COMPLETE* SHAREWARE package. By
"complete", we mean that all programs, including documentation,
must be included in the package. By "SHAREWARE PACKAGE", we
mean that you may *NOT* include any type of registration key
file or registration number that you may have obtained from ANY
SOURCE.
YOU MAY NOT;
Sub-license, assign, or transfer your rights under this agree-
ment. You agree not to transfer the PCBULT Software, or the
materials supplied, in any form to any person without the prior
written consent of FeatherNet Software, Inc.
Reproduce, transmit, transcribe, store in any information
retrieval system, or translate into any foreign language or
computer language, in any form, PCBULT, any of it's accompanying
programs or materials, including The PCBULT documentation.
Rent, lease, sub-license, or transfer The Software, Copies,
Associated Materials or your rights under this license, without
first gaining the prior written consent of FeatherNet Software,
Inc. Alter, decompile, disassemble, or reverse engineer the
Software.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 9
╔═══════════════════════════════════════════════════════════════╗
║ LICENSE AGREEMENT - Continued ║
╚═══════════════════════════════════════════════════════════════╝
Remove, obscure, alter, or cause to be hidden the FeatherNet
Software, Inc. copyright and/or trademark.
DURATION;
This agreement is effective from the day you start running the
Software. Your license continues for the period of twenty years
or until you return the Software, Copies, and Associated material
to FeatherNet Software, Inc., whichever comes first.
If you breach your agreement, we can terminate this license by
notifying you in writing. You will be required to return all
Software, Copies and Associated Materials. We may also, at that
time, choose to enforce any other legal rights.
GENERAL;
This agreement represents our entire understanding and agreement
regarding the use of the Software, Copies, and Associated
Materials and supersedes any prior purchase order, communi-
cations, advertising, or representations.
This license may only be modified in a written amendment signed
by an officer of FeatherNet Software, Inc. If any provision of
this agreement shall be unlawful, void, or for any reason
unenforceable, it shall be deemed severable from, and shall in no
way affect the validity or enforceability of the remaining
provisions of this agreement. This agreement shall be governed
by FLORIDA law. You acknowledge that you have read every
provision of this contract. By running the Software you
acknowledge that you have read and agree to this contract.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 10
╔═══════════════════════════════════════════════════════════════╗
║ LIMITED WARRANTY ║
╚═══════════════════════════════════════════════════════════════╝
FeatherNet Software, Inc. warrants to the ORIGINAL LICENSEE of a
registered FeatherNet product that the program diskette(s) on
which the program is recorded will be free from defects in
materials and workmanship under normal use and service for the
period of ninety (90) days from the date of delivery as evidenced
by a copy of your receipt. FeatherNet Software, Inc. states unto
you that the entire liability and your exclusive remedy shall be
replacement of the diskette(s) not meeting FeatherNet Software,
Inc.'s Limited Warranty if returned to FeatherNet Software, Inc.
during the ninety (90) day period. FeatherNet Software, Inc. can
accept no responsibility due to bad archives or other distrib-
ution methods in which you may have obtained this Software.
Except for the forgoing, this product is provided "as is" without
warranty of any kind. The entire risk as to the results and per-
formance of the program is assumed by you. FeatherNet Software,
Inc. does not warrant, guarantee, or make any representations re-
garding the use of, results of, merchantability or fitness for a
particular use of the product. Should the program prove defec-
tive, you, (and under no circumstances FeatherNet Software, Inc.
or any of it's dealers) assume the entire cost of all necessary
servicing, repair or correction. Furthermore, FeatherNet
Software, Inc. does not warrant, guarantee, or make any represen-
tations regarding the use of, or the results of the use of the
software in terms of correctness, accuracy, reliability, current-
ness, or otherwise; and you rely on the program and results
solely at your own risk. FeatherNet Software, Inc. will not be
liable for any damages, including but not limited to system
damage, service, repair, correction, loss of profit, lost savings
or any other incidental, consequential, or special damages of any
nature whatsoever resulting from the use or inability to use this
software.
Your continued use of this Software and any Associated Materials
confirms your intention to abide by the licensing agreement and
your understanding of the limited warranty.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 11
╔═══════════════════════════════════════════════════════════════╗
║ SHAREWARE DISTRIBUTION ║
╚═══════════════════════════════════════════════════════════════╝
The SHAREWARE version of PCBULT, PCBULT SW v1.42 may be copied
freely and distributed globally within the following guidelines;
All software must be distributed intact, including programs,
utilities, and documentation and must not have been altered in
anyway, whatsoever. You may NOT insert a BBS Ad or any other
advertising (commercial in nature or not) file into the archive.
You are authorized to include a "ZIP comment" which displays only
as the archive is being opened.
Clubs and user groups are authorized to charge a nominal fee not
to exceed $7.50 for the distribution of PCBULT v1.42 or any other
FeatherNet Software program.
Commercial Shareware Distributors, to include, but not neces-
sarily limited to, Mail Order Houses, Commercial BBSes, and/or
CD-ROM disc authors, may distribute PCBULT or any other
FeatherNet Software program and are authorized to charge a
nominal fee not to exceed $7.50 for the distribution ONLY AFTER
NOTICE IS GIVEN IN WRITING to FeatherNet Software, Inc. of your
intention to do so. Distribution of any FeatherNet software via
physical media must be labeled such that at least 20% of the
label states in a clearly worded manner that the software that is
contained on the media is Shareware. Failure to properly label
the media or notify FeatherNet Software of your intention to use
our product confirms your agreement to pay FeatherNet Software,
Inc. the sum of $10,000 or 1% of the Gross Profits gained in the
distribution of the media, which ever is greater. It is agreed
that this will be your payment to FeatherNet Software for the use
of it's software.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 12
╔═══════════════════════════════════════════════════════════════╗
║ REQUIRED PRE REQUIREMENTS ║
╚═══════════════════════════════════════════════════════════════╝
PCBULT REQUIRES the following to run;
* PCBoard v14.x or v15.x.
* An operating system to run under. This operating system
may be MS/PC DOS v3.1+, OS/2 v2.1+, DR DOS v5.0+.
(This has NOT been tested under a NOVELL environment as
of this revision. If you are running under NOVELL and
are running PCBULT, please let us know so that we can
inform other users.
* An INTEL or 100% INTEL Compatible processor (80386-SX
or faster is recommended) on a 100% compatible mother-
board is mandatory.
* Approximately 40K of RAM is utilized by the program
while operating * Any 100% IBM clone will run
FeatherNet's PCBULT
PCBULT RECOMMENDS the following;
* A machine with a large (1 MB min.) disk cache be used
for optimum performance. A 2 MB or larger RAM disk can
also dramatically increase your performance while
running PCBULT.
┌────────────┐
│ IMPORTANT! │
└────────────┘
If you are operating in a Network environment ensure SHARE is
loaded prior to starting PCBULT! This will prevent the error
'PERMISSION DENIED' during network file access. Place an
entry in your 'AUTOEXEC.BAT' file to load SHARE at boot-up.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 13
╔═══════════════════════════════════════════════════════════════╗
║ INITIAL SETUP ║
╚═══════════════════════════════════════════════════════════════╝
Create a directory on your hard drive to run PCBULT in. This may
be exist on any hard drive attached to your system, though if you
are running on a network, you should consider running PCBULT from
a hard drive on your network server.
This documentation assumes that you have a basic knowledge of
your operating system.
Example: C: (Substitute your drive and directory for
CD\PCB those in the example in needed)
MD PCBULT
CD PCBULT
This puts you in your new PCBULT subdirectory. Copy your PCBULTxx
archive in this directory and unarchive it. The original release
file was released in ZIP format and is used here in the examples.
Example: COPY C:\PCBULTxx.ZIP C:\PCB\PCBULT\PCBULTxx.ZIP
PKUNZIP -d PCBULTxx
This will unarchive all the PCBULT files. You may now delete the
".ZIP" file from this subdirectory.
NOTE: MAKE SURE THAT YOU HAVE A *COPY* OF THE PCBULTxx ARCHIVE IN
CASE YOU NEED TO START OVER.
At this point you should also make sure that PCBULT.EXE and
PCBULCFG.EXE are in your PATH. You can do this in three ways.
(1) Place the files in a directory that is in your PATH=
statement.
(2) Add this directory to your PATH=statement.
(3) 'SET PCBULT=(current path)' and 'SET PCBULCFG=(current path)'
NOTE: PCBoard v15.0 automatically creates and uses the
'SET PCBDAT=' statement.
PCBoard v14.+ users MUST use the 'SET PCBDAT='
(You probably have already done this for another
program but in case you haven't, you should make
an entry in your AUTOEXEC.BAT or BOARD.BAT that
points to the PCBoard.dat file.
Examples; SET PCBDAT=C:\PCB\PCBOARD.DAT
SET PCBDAT=C:\PCB\NODE1\PCBOARD.DAT
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 14
╔═══════════════════════════════════════════════════════════════╗
║ INITIAL SETUP - Configuration ║
╚═══════════════════════════════════════════════════════════════╝
YOUR REGISTRATION NUMBER looks at TWO things;
1) The SYSOP NAME you enter in the PCBULCFG editor MUST be the
same as you registered PCBULT.
2) The BBS NAME that you registered with MUST match the BBS name
that is found in your PCBOARD.DAT file!
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 15
╔═══════════════════════════════════════════════════════════════╗
║ CREATING A CONFIGURATION FILE ║
╚═══════════════════════════════════════════════════════════════╝
Run "PCBULCFG.EXE" to create or edit a configuration file.
PCBULCFG will look for an existing configuration file based on
the name you enter and if not it does not find it, PCBULCFG will
create a configuration file by that name.
Enter "PCBULCFG <config filename>"
PCBULT will default to PCBULT.CFG in no filename is given.
Example: PCBULCFG PCBULT.CFG
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 16
╔═══════════════════════════════════════════════════════════════╗
║ COMMAND LINE OPTIONS ║
╚═══════════════════════════════════════════════════════════════╝
When running PCBULCFG.EXE the file PCBULCFG.HLP should be in one
of two locations:
(1) In the Directory from which PCBULCFG.EXE was started;
(2) In the directory in which the .CFG file resides or will be
created.
You MUST include a complete path and filename to the .CFG file
when starting PCBULCFG.EXE.
Example:
Starting PCBULT in the C:\PCB\PCBULT directory.
The PCBULCFG.HLP file is in the directory; C:\PCB\PCBULT
A normal command-line to run PCBULCFG and create or re-
edit the CFG file named "PCBULT.CFG" would be:
PCBULCFG C:\PCB\PCBULT\PCBULT.CFG
Remember that PCBULCFG.HLP "MUST" be in either the directory
where the .CFG file is located or in the directory from which you
run PCBULCFG.EXE, in this case the C:\PCB\PCBULT directory.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 17
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor ║
╚═══════════════════════════════════════════════════════════════╝
PCBULCFG now has built in help. Simply press your "F1" key and a
comprehensive help screen will be shown to you about the the item
currently chosen. This should assist you in getting PCBULT setup
very quickly with a minimal of brain damage. Below are questions
that appear and some information on each.
┌─────────────────────┐
│ SYSOP'S (YOUR) NAME │
└─────────────────────┘
This should be the name PCBULT is or will be registered. This
must be the name you entered in the PCBOARD.DAT file as SysOp.
┌────────────────────┐
│ BBS NODE DIRECTORY │
└────────────────────┘
Enter the BBS NODE directory path for this configuration file.
This is the directory where the .BAT file to start the BBS
is located (normally "BOARD.BAT").
Example Directory: C:\PCB or C:\PCB\NODE3
┌─────────────────────────┐
│ PCBULT "WORK" DIRECTORY │
└─────────────────────────┘
This "MUST" be a unique directory which is used by no other
programs. The files PCBULT places in this WORK directory are
routinely deleted. It "MUST NOT" be the work directory for
PCBoard BBS as all files within this directory are deleted for
each file that is tested.
┌────────────┐
│ IMPORTANT! │
└────────────┘
The WORK directory WITH the path "MUST" be at least 5 charact-
characters in length and MUST be in the format: "C:\WORKDIR"
Example: C:\1 <- This would be incorrect
C:\TEMP <- This would be acceptable
In most cases your PATH would include enough characters before
entering your temporary directory name.
NOTE: If running more than one node, EACH node MUST
have a separate WORK directory.
SAMPLE Work Directory: C:\PCBULT\WORK or C:\PCBULT\WORK1
┌───────────────────────────┐
│ VIRUS "HOLDING" DIRECTORY │
└───────────────────────────┘
Enter a HOLD directory for PCBULT to move files into which
have been determined to contain a virus by the scan utility.
This directory should "NOT" be the same as the HOLD directory
for other rejected files.
Example Virus Hold Directory: C:\PCB\FILES\VIRUSED
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 18
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - CONTINUED ║
╚═══════════════════════════════════════════════════════════════╝
┌─────────────────────────────────────┐
│ LOCATION OF PKZIP.EXE & PKUNZIP.EXE │
└─────────────────────────────────────┘
Enter ONLY THE PATH and NOT the complete path and filename.
Example archive directory path: C:\PCBPATH\
┌──────────────────────┐
│ ACCEPT ZIP ARCHIVES? │
└──────────────────────┘
Enter a "Y" if you will accept these archives.
Enter a "N" if you do not want to accept these files.
All PKZIP archived files will be tested and scanned prior to
being moved to the appropriate HOLD directory if you do not
want to accept files of this archive format.
NOTE: Self-extracting PKZIP archives which have the .EXE file
extensions are also tested and scanned.
┌─────────────────────┐
│ LOCATION OF LHA.EXE │
└─────────────────────┘
Enter ONLY THE PATH and NOT the complete path and filename.
Example archive directory path: C:\PCBPATH\
┌──────────────────────┐
│ ACCEPT LHA ARCHIVES? │
└──────────────────────┘
Enter a "Y" if you will accept these archives.
Enter a "N" if you do not want to accept these files.
All LHA archive files will be tested and scanned prior to
being moved to the appropriate HOLD directory if you do not
want to accept files of this archive format.
NOTE: Self-extracting LHA archives which have the "EXE"
extensions are also tested and scanned.
┌─────────────────────┐
│ LOCATION OF ARJ.EXE │
└─────────────────────┘
Enter ONLY THE PATH and NOT the complete path and name of the
file.
Example archive directory path: C:\PCBPATH\
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 19
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - CONTINUED ║
╚═══════════════════════════════════════════════════════════════╝
┌──────────────────────┐
│ ACCEPT ARJ ARCHIVES? │
└──────────────────────┘
Enter a "Y" if you will accept these archives.
Enter a "N" if you do not want to accept these files.
All ARJ archive files will be tested and scanned prior to
being moved to the appropriate HOLD directory if you do not
want to accept files of this archive format.
Example archive directory path: C:\PCBPATH\
┌─────────────────────┐
│ ACCEPT GIF UPLOADS? │
└─────────────────────┘
Enter a "Y" if you will accept these archives.
Enter a "N" if you do not want to accept these files.
All ".GIF" files will be tested prior to being moved to the
appropriate "HOLD" directory if you do not desire to accept
.GIF files.
┌──────────────────────────────────┐
│ PATH AND FILENAME OF TDCHECK.EXE │
└──────────────────────────────────┘
You MUST enter the COMPLETE PATH AND NAME of the TDCHECK
program! Leave this line blank if you do NOT want to test
uploads created using the TELEDISK program.
Example path and filename: C:\PCBPATH\TDCHECK.EXE
┌─────────────────────────────────┐
│ ACCEPT TELEDISK (.TD0) UPLOADS? │
└─────────────────────────────────┘
Enter a "Y" if you will accept these archives.
Enter a "N" if you do not want to accept these files.
NOTE: All .TD0 files will be tested and moved to the approp-
riate HOLD directory if you do not desire to accept
these files.
┌────────────────────────────────────────┐
│ LOCATION AND NAME OF YOUR SCAN PROGRAM │
└────────────────────────────────────────┘
It doesn't matter which scan utility you use as long as it is
a quality virus detection scanning utility.
Example scan path and filename: C:\PCBPATH\SCAN.EXE
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 20
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - CONTINUED ║
╚═══════════════════════════════════════════════════════════════╝
┌──────────────────────────────┐
│ SCAN COMMAND LINE PARAMETERS │
└──────────────────────────────┘
You may leave this line blank if you have no special command
line parameters.
PCBULT only adds the /A and /SUB parameters. You should
normally also add /NOMEM /NOEXPIRE /NOPAUSE and /NOBREAK.
┌──────────────────────────┐
│ SWAP TO EMS, XMS OR DISK │
└──────────────────────────┘
PCBULT uses about 40k of RAM. Some archive utilities use
300k of ram when in the archive mode. If your memory situation
is critical and you have enough EMS or XMS available, it is
recommended that you DO SWAP testing uploads. IF you do not
have EMS or XMS, you can swap to disk which only takes a
couple of seconds when testing archives.
The exact SWAP method used is determined by PCBULT.
┌──────────────────────────────────────────┐
│ OLDEST FILE DATE YOU WILL ACCEPT IN DAYS │
└──────────────────────────────────────────┘
All files within an uploaded archive are examined for the date
stamp. If ANY file has a date stamp OLDER than the number of
days you enter the OVERAGE file count is incremented. If the
percentage of OVERAGED files is greater than the number you
specify in the configuration item below, the uploaded file is
rejected. These files WILL still be scanned for virus. The
maximum number of days allowed is 9999.
Example entry: 180
In this example, all files more than 180 days will be added to
the OVERAGE count.
┌───────────────────────────────────────────────────────────────┐
│ ENTER THE MAXIMUM PERCENTAGE OF OLDER FILES YOU "WILL" ACCEPT │
└───────────────────────────────────────────────────────────────┘
For example, if 199201 (January 1992) is your old age limit
and the uploaded archive has 20 files and you allow 20% of
them to exceed the old age restraints, then no more than 4
files in the archive can be older than 199201.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 21
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - CONTINUED ║
╚═══════════════════════════════════════════════════════════════╝
┌───────────────────────────────────────┐
│ ACCEPT non ZIP/ARJ/LHA/GIF/TD0 FILES? │
└───────────────────────────────────────┘
If you answer "Y" to the above question, files which are not
of the archive formats supported (ARJ, GIF, LHA, TD0 or ZIP )
would be Passed and Scanned only. This will allow any file
extension to be uploaded to your BBS.
Enter an "N" to restrict uploads to the archive formats you
have chosen earlier in the configuration.
┌─────────────────────────────────────────────┐
│ PATH AND FILENAME OF FILE TO ADD TO UPLOADS │
└─────────────────────────────────────────────┘
This may be an Advertisement for your BBS or any file you
desire for that matter. Leave this line blank if NO file is
to be added to the new archive.
Example: C:\PCBPATH\MYBBS.COM
** PRESS <F2> TO TOGGLE TO THE SECOND PAGE OF INFORMATION NOW!
┌──────────────────────────────────────────────────────┐
│ PATH AND FILENAME OF FILE WITH FILENAMES TO "DELETE" │
└──────────────────────────────────────────────────────┘
This "MUST" be a text file with only one name per line in
UPPERCASE. This is convenient for deleting unwanted BBS ads
and other "nuisance" files. A beginning file is included.
Leave blank if no files are to be deleted.
Example: C:\PCB\PCBULT\BADFILES.LST
┌────────────────────────────────────────────┐
│ SERIAL PORT BASE ADDRESS (IF NON-STANDARD) │
└────────────────────────────────────────────┘
If you will be using the "STANDARD" Port Address for COM Ports
1 or 2 then you may skip this question.
Examples: &h3F8
&h2F8
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 22
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - CONTINUED ║
╚═══════════════════════════════════════════════════════════════╝
┌──────────────────────────────────────────┐
│ SERIAL PORT IRQ NUMBER (IF NON-STANDARD) │
└──────────────────────────────────────────┘
If you will be using a "STANDARD" IRQ for COM ports 1 or 2
then you may skip this question.
NOTE: You may use any IRQ numbered 1 - 7 on XT class machines
or 1 - 15 and above on AT machines provided the IRQ is not
SHARED by another device. Each serial port "MUST" use a unique
IRQ. Cold boot if you specify an IRQ which cannot be used.
Example: 4 (for COM Port #1)
┌────────────────────────────────────┐
│ CREATE A FILE_ID.DIZ FROM UPDESC.x │
└────────────────────────────────────┘
If you select "Y", PCBULT will use the description the user
entered for an uploaded file and make a file_id.diz file, then
add it to the archive if a FILE_ID.DIZ or DESC.SDI can not be
found when tested..
Enter "N" if you do NOT wish to CREATE a FILE_ID.DIZ.
┌───────────────────────────────────────────────┐
│ ENTER AN ARCHIVE TYPE TO CONVERT ALL FILES TO │
└───────────────────────────────────────────────┘
PCBULT will extract ALL files from an uploaded archive
(including recursed directories).
After scanning, the file(s) will be re-archived with this
default IF the "CONVERT TO" archive type is different than
that which was used on the uploaded file.
┌──────────────────────────────────────┐
│ CONVERT FILES OTHER THAN ZIP/ARJ/LZH │
└──────────────────────────────────────┘
Selecting "Y" will cause *ALL* files uploaded to be converted
to the specified default archive type. This assumes that you
have the necessary archive programs in your path for PCBULT to
use in converting the upload.
┌─────────────────────────────────────────────┐
│ PATH AND FILENAME OF A ZIP/ARJ COMMENT FILE │
└─────────────────────────────────────────────┘
Enter the path and file name to a file to be inserted into the
archive and displayed when the file is unZIPped/unARJed.
Example: C:\PCBPATH\LOGO.TXT
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 23
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - CONTINUED ║
╚═══════════════════════════════════════════════════════════════╝
┌────────────────────────────────────┐
│ PATH AND FILENAME OF A FOOTER FILE │
└────────────────────────────────────┘
PCBULT will attempt to control screen output of lines 19
through 25 for the footer file, therefore limit this file to
"7" screen lines to avoid the screen scrolling.
NOTE: You should have 2 files! (1) An ASCII one whose path and
filename you should enter above and (2) an ANSI file
which *MUST* have a "G" appended to the name entered
above. DO NOT ADD A FILENAME EXTENTION (.XXX)
Example: C:\PCB\PCBULT\FOOTER(Include a FOOTERG file for ANSI)
┌─────────────────────────────────┐
│ YOUR PCBULT REGISTRATION NUMBER │
└─────────────────────────────────┘
You MUST enter "000" if PCBULT is not yet registered.
When you register you should keep a few things in mind. The
software will verify the code you place here in two ways;
1: The SYSOP NAME you enter in the PCBULCFG editor MUST be
the same as you registered PCBULT.
2: The BBS NAME that you registered with MUST match the BBS
name that is found in your PCBOARD.DAT file!
┌─────────────────────────────────────────────────────────────┐
│ ADD NUMBER OF FILES RECEIVED, OLDEST/NEWEST TO DESCRIPTION? │
└─────────────────────────────────────────────────────────────┘
PCBULT counts the total number of files in an uploaded
archive, including all files in imbedded archives and those
which might be in recursed sub-directories. If you enter "Y"
for this item, PCBULT will make an entry in the file
description stating the number of files, the newest file
date in the archive and the oldest file date found in the
archive. If you answer "N" then PCBULT will skip this and the
line will not be added.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 24
╔═══════════════════════════════════════════════════════════════╗
║ USING PCBULCFG - The PCBULT Configuration Editor - Continued ║
╚═══════════════════════════════════════════════════════════════╝
┌──────────────────────────────────────────────────────────┐
│ MINIMUM .GIF RESOLUTION & COLORS ALLOWED - Continued │
└──────────────────────────────────────────────────────────┘
PCBULT will limit the actual resolution and number of colors
you will allow uploaded to your BBS.
If you wish to limit these factors you must enter the resolu-
tion and colors, seperating the numbers with a small "x". It
is "VERY" important that you do NOT place any spaces within
this field!
Example: 640x480x256
Leave this field blank if you do now wish to limit your .GIF
file resolutions and colors.
PRESS THE <ESC> KEY TO EXIT THE EDITOR/ENTER THE SAVE SCREEN.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 25
╔═══════════════════════════════════════════════════════════════╗
║ SAVING THE CONFIGURATION FILE ║
╚═══════════════════════════════════════════════════════════════╝
(S)ave the configuration, (C)ontinue Editing or (A)bort (S/c/a)?
Enter a "S" to SAVE the configuration file and QUIT the config-
uration editor.
Enter a "C" to go back into the editor and make more changes or
review the information you entered.
Enter a "A" to abort. No information will be saved.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 26
╔═══════════════════════════════════════════════════════════════╗
║ SETTING UP PCBTEST.BAT ║
╚═══════════════════════════════════════════════════════════════╝
You must make the appropriate changes or entries in your
'PCBTEST.BAT' file to run PCBULT. This is a simple procedure as
as PCBULT's configuration file has in it most of the information
needed.
The base command line for PCBULT is as follows;
PCBULT [path to config file][config file name] %1 %2 %3
A sample "PCBTEST.BAT" file to run PCBULT is:
@ECHO OFF
C:\PCB\PCBULT\PCBULT C:\PCB\ULT\PCBULT1.CFG %1 %2 %3
You can also facilitate the use of a single batch file on a
multinode system by using the following;
In your "BOARD.BAT" file: SET NODE=1 (Or whatever node you are
running)
Save each PCBULCFG file with it's node number on the end;
Example: PCBULT1.CFG
PCBULT15.CFG
In your "PCBTEST.BAT" file add a %NODE% to the end of your
PCBULT.CFG filename.
Example: PCBULT C:\PCB\PCBULT\PCBULT%NODE%.CFG %1 %2 %3
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 27
╔═══════════════════════════════════════════════════════════════╗
║ OPERATION OF PCBULT ║
╚═══════════════════════════════════════════════════════════════╝
PCBULT reads the configuration file (PCBULT1.CFG in the samples)
and determines the node directory where PCBOARD.SYS is located.
┌───────────────────────────────────────────────────────────┐
│ WARNING WARNING WARNING WARNING WARNING WARNING │
│ WARNING WARNING WARNING WARNING WARNING │
│ WARNING WARNING WARNING WARNING WARNING WARNING │
└───────────────────────────────────────────────────────────┘
The files in the work directory specified for PCBULT in the
configuration file for PCBULT are "ALL DELETED". Ensure this
WORK DIRECTORY is "ONLY" used by PCBULT. The BBS work directory
MUST NOT be specified as the PCBULT work directory. Additionally,
the PCBULT work directory may have recursed sub-directoried
created during file extraction & scanning. These sub-directories
and the PCBULT work directory are all KILLED by PCBULT prior to
it's termination. Then the PCBULT work directory is recreated.
If you do not allow a particular archive format or want to just
restrict acceptable uploads to a particular archive format use
the "Y" or "N" as indicated above to ALLOW or NOT ALLOW an
archive type.
All extensions or archive formats NOT ALLOWED will be tested if
they are in a supported archive format.
All files - ALLOWED OR NOT - are SCANNED for Virus infection.
Files found having virus are moved to the Virus hold directory.
Files not allowed are left in the current conference PRIVATE
upload directory.
The swap to EMS/XMS/Disk works fine with PCBULT for users of
MS/PC-DOS and OS/2. If you have enough memory you do not need to
Swap PCBULT.
Each and every BBS Node *MUST* have a separate configuration file
and work directory.
Ensure you rectify any missing file warnings received when
running PCBULCFG.
If you find this program worthwhile, please REGISTER it! It's
only $20.00
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 28
╔═══════════════════════════════════════════════════════════════╗
║ RUNNING PCBULT FROM THE LOCAL CONSOLE ║
╚═══════════════════════════════════════════════════════════════╝
For local operation outside the BBS, use the normal command line
syntax followed by a " /L"
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 29
╔═══════════════════════════════════════════════════════════════╗
║ TIPS & TROUBLESHOOTING ║
╚═══════════════════════════════════════════════════════════════╝
1) CONSTANTANT VIRUSED FILES
If you are experiencing problems with all your files failing
viruses, set this selection to No "IF" you are already
swapping PCBoard.
2) PCBOARD'S TEMPORARY WORK DIRECTORY
If you are using (or updating to) v1.1, you may not be
concerned with the following information.
It seems that PCBoard will allow certain locations within
their setup program to be entered incompletely.
The particular location we were concerned with was "Location
of Temporary Work Files:" locaed in the PCBSetup program
under (B) File Locations, (A) System Files & Directories.
PCBoard allows TWO different options as to how this directory
may be setup:
PCBoard allows you to enter either a TEMP DIR NAME with
TRAILING BACKSLASH (assumes it is under the current directory,
normally the NODE directory) "OR" the FULL PATH and TEMP DIR
NAME with TRAILING BACKSLASH.
Their examples:
┌──────────────────────────────────────────────────────┐
│ WORK\ <-- subdirectory off current directory │
│ F:\WORK1\ <-- ram drive, work location for node 1 │
└──────────────────────────────────────────────────────┘
┌───────────────────────────────────────────────────────────┐
│ * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * │
└───────────────────────────────────────────────────────────┘
If you are using v1.0, you "MUST" use the second method in
their examples with PCBULT.
THE FULL PATH and TEMP DIRECTORY NAME WITH TRAILING BACKSLASH!
Example: C:\PCB\PCBTEMP\
PCBoard will temporarily write the file UPDESC.(NODE#) to this
directory.
PCBULT is passed the PATH and FILENAME with the %3 variable in
the PCBTEST.BAT file. If you do not pass the FULL PATH of this
directory, PCBULT v1.00 will NOT import the FILE_ID.DIZ or
DESC.SDI nor will it WRITE a FILE_ID.DIZ if that option is
specified.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 30
╔═══════════════════════════════════════════════════════════════╗
║ TIPS & TROUBLESHOOTING - Continued ║
╚═══════════════════════════════════════════════════════════════╝
3) SCAN PROGRAM SPECIFIED IN PCBULT
If you wish to use SCAN.EXE (by McAffee) but DO NOT wish to
use our default parameters, rename it to another name and
then call it by that name with your command line parameters
specified.
Example: SCAN!.EXE instead of SCAN.EXE
NOTE: The next version will NOT have built in command
parameters for SCAN.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 31
╔═══════════════════════════════════════════════════════════════╗
║ REGISTRATION OF PCBULT ║
╚═══════════════════════════════════════════════════════════════╝
Many thousands of hours and tremendous effort have been invested
in FeatherNet Software's programs to make them as user-friendly,
dependable, and flexible as possible. If you do choose to
continue to use PCBULT as your Upload File Test package of choice
please show your appreciation for a quality product by
registering it.
To register PCBULT and become one of an ever growing number of
PCBoard SysOps utilizing this powerful, versatile, yet most
affordable Upload Test package, fill out and mail the licensing
agreement found on the LAST page of this documentation.
Registration will DISABLE the addition of the "Tested by
PCBULT v1.42 [Unregistered]" line added into your UPDESC file
(DIR file) after each file is processed.
By registering PCBULT you are supporting the most affordable and
'support oriented' marketing system existing in the software
industry today, the SHAREWARE concept.
REGISTRATION of PCBULT is only $20.00* for the full package (or
$25.00* with a quality set of bound, laser printed documentation)
and 1 years voice and BBS support.
REGISTRATION is easy! Just fill out the registration form found
on the LAST page of this documentation and send it with your
check or money order (US FUNDS ONLY) to;
FeatherNet Software
P.O. Box 260666
Tampa, FL 33685-0666
(813) 249-8422 [BBS/Fax]
(813) 249-9322 [Voice]
* Plus shipping and handling. Florida residents please add
applicable State and County Sales Tax. All prices are
subject to change without prior notice. Please also note
that there will be a $20.00 fee for returned checks as
applicable under Florida state law.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 32
╔═══════════════════════════════════════════════════════════════╗
║ SUPPORT FOR PCBULT ║
╚═══════════════════════════════════════════════════════════════╝
FeatherNet Software, Inc. offers some of the most comprehensive
support available to it's users. We offer you advantages that
other small time BBS authors only dream of! Non-registered users
may take advantage of the Unregistered support conference for
questions and answers on the FeatherNet HQ BBS system.
Registered users have the advantage of both Voice and Data
support via an expert Technical Support staff here at FeatherNet
Software, Inc.
We also monitor the PCBNET, PCBOARD, and SHAREWARE Fido Net Echos
on the Fido BackBone
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 33
╔═══════════════════════════════════════════════════════════════╗
║ UPGRADES FOR PCBULT ║
╚═══════════════════════════════════════════════════════════════╝
PCBULT upgrades will be available on the following schedule;
All upgrades (except free bug fixes) include one (1) year free
Technical support as outlined above.
Bug Fixes x.x"X" FREE
(User downloads from the FeatherNet HQ BBS)
Minor Upgrades x."X"x $ 3.00 (1,2)
(User downloads from the FeatherNet HQ BBS)
(FeatherNet Software mails upgrade to you) $ 8.00 (1,2,3)
Major Upgrade "X".xx $13.00 (1,2,3)
(FeatherNet Software mails upgrade to you)
1 - Plus shipping and handling.
2 - Florida residents must add State and County sales tax as
applicable.
3 - Add $5 for new printed documentation.
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝
PCBULT - PAGE 34
╔═══════════════════════════════════════════════════════════════╗
║ REGISTRATION AGREEMENT ║
╚═══════════════════════════════════════════════════════════════╝
Date: ___/___/19____
I, _________________________________, hereby apply for a license
to operate the following FeatherNet Software, Inc. product.
QTY DESCRIPTION PRICE EXTENDED
─── ──────────────────────────────────── ─────── ────────
[ ] FeatherNet PCBULT v1.42 Upload Tester $ 20.00 ________
[ ] FeatherNet PCBULT v1.42 W/Manual $ 25.00 ________
[ ] 1 Year Access to FeatherNet HQ BBS (FREE w/above) $ 35.00
Add Florida State and County Sales Tax (If applicable) ________
SHIPPING & HANDLING FOR EACH W/MANUAL W/O MANUAL
───────── ──────────
[ ] U.S. MAIL or U.P.S. GROUND $ 5.00 $ 3.00 ________
[ ] U.P.S. ORANGE (Third Day) $ 15.00 $ 10.00 ________
[ ] U.P.S. BLUE (Second Day) $ 20.00 $ 15.00 ________
[ ] U.P.S. RED (Over Night) $ 25.00 $ 20.00 ________
Total U.S. Funds submitted ________
I understand that the registration fee entitles me to free bug
fixes until the next MINOR release and that any bug fixes must be
downloaded at my expense from the FeatherNet HQ BBS. Furthermore,
as a registered SysOp, I understand that I will have continuous
use of the FeatherNet HQ BBS free of charge for a period of one
year.
THE FOLLOWING INFORMATION IS MANDATORY TO PROCESS YOUR ORDER.
PLEASE MAKE SURE ALL INFORMATION IS TYPED OR PRINTED CLEARLY AS
SOME INFORMATION IS USED TO PROCESS YOUR FEATHERNET PRO!
REGISTRATION CODE!
┌──────────────────────────────────────────────────────────────┐
│ │
│ NAME: _____________________________________ │
│ │
│ STREET ADDRESS: _____________________________________ │
│ │
│ CITY, ST, ZIP CODE: _____________________________________ │
│ │
│ DAYTIME PHONE (V): ( ) ______ - ________ │
│ │
│ EVENING PHONE (V): ( ) ______ - ________ │
│ │
│ BBS PHONE LINE (D): ( ) ______ - ________ │
│ │
│ BBS NAME: _____________________________________ │
│ │
│ DISKETTE TYPE DESIRED: 1.44 3.5" [ ] or 1.2 5.25" [ ] │
└──────────────────────────────────────────────────────────────┘
Signed: _________________________
╔═══════════════════════════════════════════════════════════════╗
╚═══════════════════════════════════════════════════════════════╝