home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
PROTOCOL
/
PROTOCL.ZIP
/
PROTO018.TXT
< prev
next >
Wrap
Text File
|
1992-01-30
|
16KB
|
402 lines
From: Chris Albertsen Area: Protocols
To: Mike Ward 8 Jan 92 02:18:16
Subject: External Protocols UpdReq
Hey Mike,
Are you using the Opus Jmodem in your Protocal.ctl?
Chris
--------------= Brought to you compliments of Plastic Tower =---------------
From: Colin Wheat Area: Protocols
To: Mike Tayeb 5 Jan 92 11:50:06
Subject: External Protocol Problems UpdReq
MT> Thanks for your help with installing HS/Link.
MT> I don't understand what the part that says @%x:HSLink%K.Ctl does.
From the HS/Link Documentation:
@FILELIST Transmit list of files contained in FILELIST to remote
computer. This is used when you want to make a long
list of files in advance, then transmit them all with a
single command. It is also used by BBS programs to
produce long batches of downloads.
Maximus translates %x to the current drive letter, and %K to the task number
in Hex.
MT> Also, if I omit all the %K parameters in the entry for HS/Link
MT> in Protocol.Ctl, it should make no difference in the operation
MT> since I am not running more than one node right?
That's correct. It should work for you as is though.
Regards.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Melvain Donyes Area: Protocols
To: Patrick Siglin 2 Jan 92 11:33:56
Subject: Re: External Protocol UpdReq
Hi Patrick...
A quick quote from your message of 27-Dec-91:
MD>> Better question is, "Why would you want to?" :-)
PS> To put in Dsz so I can take advantage of Mobyturbo SO THERE! 8-)
Oh! Sorry, I hadn't thought of that... :-)
Melvain
--------------= Brought to you compliments of Plastic Tower =---------------
From: Brian Hampson Area: Protocols
To: All 6 Jan 92 17:49:36
Subject: Bimodem external protocol UpdReq
OK....here's the scenario....with the present entry in protocol.ctl for
Bimodem, there is NO description passed for the file, since it is using the
DSZ style log...There exists a way in Bimodem to create a binary log file
containing the description.
Here's what I would like to see...a simple quick (dirty and ugly if need be)
little util that will read the binary log (as laid out in the Bimodem docs)
then write a DSZ style log WITH a description included. This would be a
WONDERFUL thing.
Thanks,
B.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Glenn Wilser Area: Protocols
To: Billy Cash 31 Dec 91 04:50:08
Subject: External Protocol UpdReq
PS> How do you get rid of the internal zmodem?
MD> Better question is, "Why would you want to?" :-)
---
MAX -xz (other command line paramiters)
Glenn
--------------= Brought to you compliments of Plastic Tower =---------------
From: Thomas Mackie Area: Protocols
To: Scott Dudley 8 Jan 92 05:30:18
Subject: User ID Change UpdReq
Sorry for the delay in getting back.. But I seem to have found what was
causing Max to randomly change a users identity after completing a file
transfer..Well.. it seems that Max will grab hold of an old RESTAR??.BBS file
if there is one laying around, and think that is the current users ID. I
don't currently have any external protocols added. Only the original,
supplied with Max protocols are inplace.. All I do now, is make sure these
RESTAR?? are deleted after each caller.. END OF PROBLEM...
Hope this helps you find a solution.. Thanks for the great Max!
--------------= Brought to you compliments of Plastic Tower =---------------
From: Ed Henry Area: Protocols
To: All 9 Jan 92 01:52:14
Subject: Hyperprotocol UpdReq
Several users have requested that I make Hyperprotocol available to them.
I have obtained the archive hyp11e.zip, but if anyone can help I need the
entries for the protocol.ctl as well as special .bat files or anything else
necessary. Thanks in advance.
Ed
--------------= Brought to you compliments of Plastic Tower =---------------
From: Barry Corlazzoli Area: Protocols
To: Steve Hughes 9 Jan 92 01:48:58
Subject: Hyperp protocol.ctl UpdReq
> ever come across any
> bug minor or major. Until now I've never heard of any
> and my users have never reported any, they love it.
As a matter of fact, I don't know them either! I just HEARD this through
certain echoe's and friends etc...
-> Barry Corlazzoli <-
--------------= Brought to you compliments of Plastic Tower =---------------
From: Leo Vildosola Area: Protocols
To: Tristan Young 8 Jan 92 01:08:00
Subject: MAXIMUS & Protocols UpdReq
TY>Can anyone send me their PROTOCOL.CTL file with the following definitions:
TY>Super Zmodem
The following Protocol definition is the one I use and I don't see why
it would not work for others.
___ SZmodem Protocol Definition
Protocol SZmodem
Type Batch
LogFile DSZ%K.Log
ControlFile SZmodem.Ctl
DownloadCmd command /c SZXfer DSZ%K.Log SZ @SZmodem.Ctl
UploadCmd command /c SZXfer DSZ%K.Log RZ %v
DownloadString %s
UploadString
DownloadKeyword z
UploadKeyword Z
FilenameWord 10
DescriptWord 0
End Protocol
___
The respective batch file SZXfer.Bat is as follows:
--- SZXfer.Bat
@Echo off
REM SZmodem upload/download batch file
Set Dszlog=%1
c:\Szmodem\SZMODEM /CFGPATH /NOLOG /DL c:\Szmodem\ %2 %3
Set Dszlog=
___
The above batch file overrides any necessary setup done with SZConfig.
The version of SZmodem I'm using is 1.60 but I have used the same batch
file since 1.41. The only thing that I would suggest you do is place
the directory where your SZmodem.Cfg can be found... Anyway I hope this
helps. G'd day!
X LeO X
___
X SLMR 2.1 X I'd go on welfare, but I'm not used to living that well!!
--------------= Brought to you compliments of Plastic Tower =---------------
From: Leo Vildosola Area: Protocols
To: Barry Carter 8 Jan 92 01:08:02
Subject: Gymodem UpdReq
BC>Protocol Gymodem
BC> Type Batch
BC> Type Opus
BC> LogFile Gymodem%K.Log
BC> ControlFile Gymodem%K.Ctl
BC> DownloadCmd Gymodem.Exe Gymodem%K.Ctl
BC> -p%p -b19200 -t%k -m%d -f%D -r%t
BC> UploadCmd Gymodem.Exe Gymodem%K.Ctl
BC> -p%p -b19200 -t%k -m%d -f%D -r%t
BC> DownloadString Send %s
BC> UploadString Get %s
BC> DownloadKeyword Sent
BC> UploadKeyword Got
BC> FilenameWord 1
BC> DescriptWord 4
BC> End Protocol
I have never set up this protocol but I know what your problem is.
Whenever Maximus gets the wrong info about the logfile it gives
this mnessage. The only way to fix this is to give it the write info
about the position of your 'words'. Let me take a look at one of the
log files and I'll tell you exactly what is wrong... Another thing is
that you may prefer to creatre a batch file for the call. Also, try
placing the Send and Get command words in the Downloadcmd/Uploadcmd and
leave the DownloadString as %s. Take out the %s from the UploadString
unless you really need it. If you would have placed a copy of a log
file a could help a lot more... G'd day!
X LeO X
___
X SLMR 2.1 X I'd go on welfare, but I'm not used to living that well!!
--------------= Brought to you compliments of Plastic Tower =---------------
From: Mike Ward Area: Protocols
To: Chris Albertsen 9 Jan 92 01:09:00
Subject: External Protocols Rec'd UpdReq
+---------
CA| Are you using the Opus Jmodem in your Protocal.ctl?
+---------
No.
___
X PQ-Under-Trial 2.15 X
--------------= Brought to you compliments of Plastic Tower =---------------
From: Lawrence Sullivan Area: Protocols
To: Sir Roric 10 Jan 92 11:35:46
Subject: Re: Bad up loads UpdReq
SR> as you can see her downloading works just fine. She has
SR> used a couple of different protocols but all result in
SR> aborts due to to many errors. I know this is probably
SR> not a Maximus problem but I hav absolutly no idea on
When I first converted from 1.02 to 2.00, I had a user who had just about the
opposite problem. He could upload, which he did and that was great. But
when he tried to download, it would timeout. I'd logged onto Max remotely
and tested the protocols both ways. That wasn't the problem.
It turned out that he hadn't created the directory that he'd setup his comm
program for (to receive the downloads into).
I dunno... ...wish them luck!
Larry
--------------= Brought to you compliments of Plastic Tower =---------------
From: Joshua Lee Area: Protocols
To: Ken Thompson 11 Jan 92 15:44:14
Subject: Bimodem .GT. HS-Link UpdReq
In a message of <Jan 09 23:50> Ken Thompson (3:712/532) writes:
KT> On the MAX side of things - yes - but I've seen too many users go
KT> mad trying to get Bi running
I've heard that HS-LINK is alot easier to setup than Bimodem, although it
doesn't support a few features. I haven't run it before though. (Anyone in
net 109 got this program?) I assume it works with Maximus in the new
protocol.ctl file.
JBL
--------------= Brought to you compliments of Plastic Tower =---------------
From: Leo Vildosola Area: Protocols
To: Ed Henry 11 Jan 92 01:11:04
Subject: Hyperprotocol UpdReq
EH>Several users have requested that I make Hyperprotocol available to them.
EH>I have obtained the archive hyp11e.zip, but if anyone can help I need the
EH>entries for the protocol.ctl as well as special .bat files or anything else
EH>necessary. Thanks in advance.
EH>Ed
Protocol.Ctl I use is as follows:
Protocol HyperProtocol
Type Batch
LogFile Hyperp.Log
ControlFile Hyperp.Ctl
DownloadCmd command /c Hyper %P %W SEND @Hyperp.Ctl
UploadCmd command /c Hyper %P %W RECEIVE %V
DownloadString %s
UploadString
DownloadKeyword
UploadKeyword Saved
FilenameWord 2
DescriptWord 0
End Protocol
A sample batchfile is as follows:
@Echo Off
BNU /Q
HYPERP @HYPER.TXT PORT:%1 BAUD:%2 %3 %4
BNU /C
Note that you need the FOSSIL disabled while using the protocol.
A sample copy of HYPER.TXT is as follows:
COMPRESS:OFF
SUSPEND:ON
HANDSHAKE:RTS/CTS
TIMESTAMP:OFF
LOGFILE:HYPERP.LOG
DISPLAY:OFF
OVERWRITE:ON
On all our testing, we have determined the following 'must have':
- Usage of 'Saved' as the UploadKeyword do to the nature of the
Hyperp.Log. It contains more than one line of information totally
useless to Maximus.
- We had to have SUSPEND:ON at both ends for the system not to crash. I
don't know why this is since we both have fairly discent systems.
- DISPLAY:OFF is a must for unattended BBS use. The reason for this is
that if you exclude this parameter you will have to be there to 'press
a key' after all the Xfers.
Hope this helps you and I hope that you do have the same version of
Hyperp I have. Or maybe even a later version. BTW, the contents of
HYPER.TXT can be put in the command line if your version does not
support it. G'd day!
BTW, if you need any more help, you know where to find me.
X LeO X
___
X SLMR 2.1 X You didn't say what you said I said you said
--------------= Brought to you compliments of Plastic Tower =---------------
From: Steve Hughes Area: Protocols
To: Scott Dudley 12 Jan 92 19:25:34
Subject: PROTOCOL.MAX UpdReq
Hi Scott,
A query please.
I run a network system using max.exe etc on every drive/node. I've
noticed that I can silt from a different max.ctl on each drive and produce a
custom max.prm for each drive/node. However, I seem to produce protocol.max
only on my max system drive. This is screwing up my external protocols
because I think they are being fed parameters from this file (does this sound
reasonable ?).
I cannot run max.exe etc. from only one drive because I need different
modem init strings etc. Is there another way to solve this protocol.max
problem ?
Cheers Steve.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Scott Dudley Area: Protocols
To: Steve Hughes 13 Jan 92 00:41:08
Subject: PROTOCOL.MAX UpdReq
SH> max.prm for each drive/node. However, I seem to produce
SH> protocol.max only on my max system drive. This is
SH> screwing up my external protocols because I think they
SH> are being fed parameters from this file (does this
SH> sound reasonable ?).
The external protocol driver will always read from protocol.max. Do you need
a different set of protocols for each node or something?
SH> I cannot run max.exe etc. from only one drive
SH> because I need different modem init strings etc. Is
SH> there another way to solve this protocol.max problem ?
How are init strings related to this?
--------------= Brought to you compliments of Plastic Tower =---------------
From: Ed Henry Area: Protocols
To: Leo Vildosola 13 Jan 92 22:41:34
Subject: Hyperprotocol UpdReq
EH>Several users have requested that I make
EH>Hyperprotocol available to them.
EH>I have obtained the archive hyp11e.zip, but if
EH>anyone can help I need the
Thanks for the help Leo..Hope it works as well for me as it does you.
Ed
--------------= Brought to you compliments of Plastic Tower =---------------
From: Ervin Jay Area: Protocols
To: Bill Drake 13 Jan 92 01:13:08
Subject: Mail downloading UpdReq
On 01-11-92 Bill Drake wrote to Joshua Lee...
BD> BD>> Hi, Scott. Thanks for the reply. Is there a possibility of
adding
BD> BD>> ASCII download capability to Max2? Is this terribly difficult?
Find a file called OATE_100.ZIP and add the ASCII protocol to the
Protocol.CTL file.......instant Ascii downloads.
Cheers Erv...
... OFFLINE 1.34 * CAUTION:I brake for Bauds (If I see 'em)
--------------= Brought to you compliments of Plastic Tower =---------------
From: Bill Drake Area: Protocols
To: Ervin Jay 16 Jan 92 11:23:28
Subject: Mail downloading UpdReq
EJ> Find a file called OATE_100.ZIP and add the ASCII protocol to the
EJ> Protocol.CTL file.......instant Ascii downloads.
EJ> Cheers Erv...
Thanks Erv - will begin the hunt.
EJ>... OFFLINE 1.34 * CAUTION:I brake for Bauds (If I see 'em)
Hmmm. Do you brake for the shapely, curvaceous V.42bis/V.32bis ones only,or
do you brake for the frumpy 1200/2400 bps non-error-correcting ones as well?
Inquiring minds want to know... ;-)
<smirk>
Bill