home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
PPPBCKP
/
SRC
/
SRC15B91.ZIP
/
WATTSRC.ZIP
/
README
< prev
next >
Wrap
Text File
|
1992-07-08
|
31KB
|
894 lines
Waterloo TCP
Installation Notes
by Erick Engelke
Introduction Introduction
TCP/IP is not a program, it is a set of protocols which have
been implemented on many machines. All machines running an
implementation of TCP/IP and connected to the world wide
Internet are capable of communicating with each other.
There are several popular non-commercial TCP/IP
implementations for MS-DOS computers. Each offers special
features but with varied drawbacks. I don't believe there
is a clear choice of one implementation for all needs, but
users are free to pick the best or most useful applications
from each offering.
These notes describe the various applications available
today. Please remember that the applications are free
software, you may use them and pass them on to others, but
there is no warranty and the support is very limited. You
also may not sell the included programs.
Installation Installation
Waterloo TCP only works if you have a packet driver, a
special program which allows your network interface card to
talk with the Waterloo TCP applications.
Thanks to some very generous people, particularly Russell
Nelson, you probably will not have to buy a packet driver.
If you are using Ethernet hardware you can probably find
free packet drivers for your cards via anonymous ftp to
sun.soe.clarkson.edu in the pub/drivers subdirectory. ____________________ ___________
Waterloo TCP only supports Class 1 drivers. Officially
these are called Ethernet class drivers, but many other
types of networks have drivers which make them emulate
Ethernet hardware. For example, any Novell system using IPX
or any IBM compatible Token Ring network can be made to act
like Ethernet. Even serial lines (SLIP) emulate Ethernet if
you use Michael Martineau's ETHERSLIP driver available by
anonymous ftp from owl.nstn.ns.ca in in.coming/etherslip. ______________ ___________________
To start using Waterloo TCP software you will need to get it
configured. There are two options, using BOOTP or a
configuration file.
If you think you may have a BOOTP server on your local
subnet, copy the file TCPINFO.EXE into a new subdirectory
and run the command TCPINFO. It may take a few seconds.
After a maximum of 30 seconds, TCPINFO should tell you if it
could get configured via BOOTP. If it could not, or BOOTP
is too slow, you will have to use a configuration file.
You will probably want a configuration file anyways, as it
allows some extra things which are not inherent in BOOTP.
Waterloo TCP lets you use a config file, and pick up extra
things from BOOTP.
If you don't really know what you are doing, continue on
with this section and make a config file.
First you will need some important information from you
local TCP/IP guru. Do not merely guess, these values must
be correct or you may do some damage and get yourself on the
death threat list from your local network people.
IP address (eg. 4.1.2.23)
my_ip = ______.______.______.______
local subnet mask (eg. 255.255.254.0, never 255.255.255.255)
netmask = ______.______.______.______
local gateway (eg. 4.1.2.1)
gateway = ______.______.______.______
primary name server (eg. 129.97.128.1)
nameserver = ______.______.______.______
alternate name servers (up to 9 more if so desired)
just keep repeating this line with new addresses.
nameserver = ______.______.______.______
name domains list, (eg. UWaterloo.ca or edu)
d o m a i n s l i s t =
__________________________________________________
These values must be placed in a file called WATTCP.CFG.
Below is a sample copy, remember, do not use my values, get
the correct ones!
print="using sample configuration" # sample comment
print="contact local network guru for more details"
my_ip=129.97.176.99
netmask=255.255.254.0 # sample comment
nameserver=129.97.128.24 ; sample comment
nameserver=129.97.128.196 # alt nameserver
nameserver=129.97.128.1 # 3rd nameserver
gateway=129.97.176.1
domainslist="uwaterloo.ca"
The rules are simple, directive=value.
If quotes are not used in the value field, the value will be
terminated by the start of a comment or by a newline, and
all white space (spaces and tabs) are removed.
If you specify quotes around the value, only a second set of
quotes or a newline will end the value field and comments
must be preceded by an end quote mark. Whitespace is
preserved inside quotes.
Place the WATTCP.CFG file in the same subdirectory as the
TCP application programs. If the file is not found there
the programs automatically look for the file in the current
subdirectory of the current disk. Failing that, a message
will be displayed but the program will not necessarily
abort.
You may override the above directory choices by explicitly
setting the path in an environment variable.
eg. set wattcp.cfg=n:\internet
The environment variable is checked first, and if it is
defined that configuration file is used. This is
particularly useful on installations where the software is
located on a fileserver, but individual workstations will
need separate configuration files.
Testing Testing
First, to ensure that you entered all the parameters
correctly, run TCPINFO. It will list all system constants.
If one or more of them seem incorrect, check your spelling
in the WATTCP.CFG file.
Next we will test the PING command to see that everything
works and asks another computer if it is up. The first
argument to PING is the name of the other computer. The
second argument is the number of retries. Since your guru
supplied the ip address of a gateway, we will first try
that.
ping 129.97.128.1 5 don't use 129.97.128.1,
use your gateway's IP
address
This will generate five attempts. You should have more than
0 % success. Otherwise your gateway is down or your ip
address or gateway is wrong.
If you had success, try pinging the ip address of your
nameserver.
eg. ping 129.97.128.196 5
Now check your nameserver by trying to resolve the name of a
local machine. Near me is a machine named 'cupid'.
ping cupid 5
If that did not work, your various nameserver entries are
incorrect, your gateway or network mask is incorrect, your
nameservers did not want to provide name service, or you did
not specify a valid name.
These tests will help your guru figure out what might be
wrong.
Applications Applications
TCPINFO TCPINFO
Displays the current Ethernet/TCP configuration. It is
useful for testing spelling and contents of files and
for determining ethernet addresses.
PING PING
PING [-d|/d] [-s|/s] hostname [attempts]
You have already seen PING described briefly in the
installation section. PING will not generate more than
one request per second, it also attempts to block
broadcast attempts.
PING can be used in a debugging mode (-d or /d).
eg. PING -d 129.97.128.1
If you do not specify the number of attempts to be
made, only one attempt will be made.
eg. PING 129.97.128.196
Specifying /s will ping the other machine once per
second for a very long time.
eg. PING -s 129.97.128.196
COOKIE COOKIE
COOKIE [host]
eg. COOKIE
COOKIE conehead.uwaterloo.ca
Print a witty saying from one of the cookie servers.
DAYTIME DAYTIME
Print the time of day using TCP
DAYTIME host
eg. DAYTIME 129.97.128.1
DAYTIME watmath.uwaterloo.ca
If the host supports TCP based DAYTIME text services,
the time of day will be displayed as a text string.
See also NTIME
FINGER FINGER
Determine user or system information
FINGER [user]@host
eg. FINGER erick@sunee.uwaterloo.ca
FINGER @sunee.uwaterloo.ca
Finger returns the remote computer's information on a
particular user.
If no user is specified, FINGER will return the names
of currently logged users on that machine.
LPR LPR
Spool print jobs
LPQ LPQ
Query the print queue
Run these commands with no arguments for the exact
syntax. Check to see that the appropriate host
privileges are extended to the pc.
An explanation beyond this is beyond the scope of
this brief document, see your local UNIX guru with
HOSTS.LPR or whatever s/he feels is
appropriate.
NTIME NTIME
Set DOS time from the Network.
NTIME host [addminutes]
NTIME contacts the host and requests the current time.
Computers are supposed to respond with the number of
seconds since Jan 1, 1900 GMT. Many simply return the
current time adjusted to the daylight savings time and
time zone. I allow you to specify addminutes if you
need to add or subtract a certain number of minutes to
the returned time.
I was considering using a DST conversion algorithm but
have not yet done so.
TCPPORT TCPPORT
Treat the serial port as a TCP connection
TCPPORT host port "program options"
Host is the name or ip address of the remote computer
and port is the TCP port number on that computer.
You may specify the terminal emulation desired by
setting the environment variable
set tcpterm=termtype
eg. set tcpterm=vt102
See the section on TCPPORT below
REXEC REXEC
Execute the following command on a remote host
REXEC host [user [pass]] cmd
The "cmd" command will be executed on the remote
computer. If you fail to specify either the password
or the userid, you will be prompted for them.
eg. rexec hq.iraq "ls -l"
rexec hq.iraq saddam "ls -l"
rexec hq.iraq saddam white_flag_of_victory "ls"
REXEC does not do terminal interpretation, you may wish
to have NANSI.SYS loaded to provide the necessary
emulation. Waterloo TCP REXEC is good when you wish to
redirect output to a file.
Other WATTCP Programs Other WATTCP Programs
The above programs are relatively simple demonstrations of
the capabilities of the WATTCP TCP/IP kernal. Advanced
programs are usually distributed separately as they tend to
be updated in a different schedule from the kernal
libraries.
MSKERMIT 3.11 MSKERMIT 3.11
One of the first popular uses for WATTCP was its
ability to make communication programs such as MSKERMIT
act like TELNET facilities. So overwhelming was the
number of requests that MSKERMIT 3.11 now includes a
derivative of the WATTCP kernal and the TCPPORT
application.
TELNETD TELNETD
The next most popular use is easily TELNETD, a program
which allows you to TELNET into your pc and control it
using any TELNET program on any computer platform.
TELNETD can be found via anonymous ftp to
sunee.uwaterloo.ca in pub/wattcp/telnetd.zip.
Using Communications Programs with TCPPORT Using Communications Programs with TCPPORT
You may wish to use a terminal communication program rather
than TELNET. Waterloo TCP makes this very easy to do with
its TCPPORT program. Now that TCPPORT is built into
MSKermit I don't really have a good example, but here goes:
Start by creating a configuration file which tells your com
program to use the BIOS ports rather than hardware. Then
create a batch file which looks like:
TNCOMM.BAT
echo off
tcpport %1 23 "c:\comm"
Here I was assuming you kept comm.exe in the root of C: and
tcpport could be found somewhere in the path. Now you can
easily TELNET to any host by typing:
TNCOMM host
eg. TNCOMM 129.97.128.1
or TNCOMM watmath.uwaterloo.ca
After you log off, Waterloo TCP returns the characters
forming [??Host closed connection??] or some similar
message. You simply need to exit your com program. Exiting
kermit without logging off will simply close the connection
and typically log you off.
You may select a specific terminal emulation which TCPPORT
should try to run by setting the tcpterm environment
variable before running tcpterm:
eg. set tcpterm=vt102
Advanced WATTCP.CFG Options Advanced WATTCP.CFG Options
This section is useful once you have determined that
Waterloo TCP actually works for you.
Including Sub-Config Files
You may wish to use a combination of generic WATTCP.CFG
file and a smaller sub-config file which will be
located on the user's private subdirectory. Any
command which can be placed in the main config file may
also be placed (or replaced) in the sub-command file.
eg.
include = c:\local.cfg
After the subcommand file is parsed, Wattcp returns to
the main config file. The depth of this system is
limited by the number of file handles and the stack
size.
If the subcommand file cannot be found, an error
message will be printed. To allow for the possible,
but not-essential existance of a file (i.e., include it
if it is there, but don't complain otherwise) you may
simply prepend the filename with a question mark.
eg.
include = ?c:\local.cfg
IP Addresses
Most network administrators would prefer to not have
many copies of the configuration file, but rather a
single file from which everyone can be easily
configured.
As demonstrated above, Waterloo TCP normally accepts
the ip number from within the WATTCP.CFG file.
BOOTP
Many sites prefer to use BOOTP, a standard protocol
which requests the user's ip address and other
information from a BOOTP server.
To use BOOTP, you must specify the name 'bootp':
my_ip = bootp
in the config file. This will broadcast the request on
the local subnet. You may specify a specific BOOTP
server which need not be on the same subnet, by using:
bootp = host
eg. bootp = 129.97.128.1
The default timeout value is 30 seconds. You may
change that by using:
bootpto = seconds
eg. bootpto = 50
If no WATTCP.CFG file is found, Waterloo TCP programs
always resort to BOOTP.
ETHERNET to IP Table
Another option currently exists, I allow multiple IP
numbers in WATTCP.CFG with each one being tied to a
particular Ethernet address. If your Ethernet address
is found in list, your IP address will be assigned.
ETHIP=ethaddr,ipaddr
eg. ETHIP=00:01:2F:BC:44:33,128.252.35.4
In this case, the machine with Ethernet address
00:01:2F:BC:44:33 would be assigned the ip address
128.252.35.4. Note that Ethernet addresses are
hexadecimal with intermediate colons, ip addresses are
dotted decimal, and I use a comma to separate the two.
Also, since Waterloo TCP removes white space, you may
place a space between any of the fields if you don't
use quotes, and you may end the line with a comment
describing where the station lives or to whom it
belongs.
You can quickly find the Ethernet address of a station
by running the TCPINFO command.
Subnets
The Internet is comprised of many, many subnets. There
are several protocols normally used to help computers
reach computers on other subnets.
Most PC based TCP kernals depend on routing tables to
manage the possible routes, so I elected to use that
strategy.
A routing table exists in memory with a current
capacity for 12 different routes. Each route must
specify a gateway, an optional destination subnet, and
then an optional subnet mask.
gateway = gate_ip [, subnet [, subnet_mask ]]
eg. gateway = 129.97.176.1 # default
eg. gateway = 129.97.176.2, 129.97.0.0, 255.255,0,0
The first example shows how a default gateway is
created. A default gateway is used if no other choices
exist.
The second example shows how to specify a gateway for a
particular subnet. In this example, whenever the 'top'
16 bits are 129.97, that gateway will be used.
Yes, you need not always specify the mask, but it is
necessary for class B subnets, so I simply suggest that
you always do specify the mask.
You may specify the same gateway several times with
different routes.
Non-contiguous subnet bits are supported.
To check your configuration and to see the precedence
of gateways, run TCPINFO.EXE.
Host Name
Some applications will wish to know your PC's name, a
short textual name. This may be set with the
WATTCP.CFG line:
hostname = name
eg. hostname = mole
Notice that you do not specify the domain, that is
found from the domain string.
Timeouts
Most Waterloo TCP programs have a specified timeout
value between activity before a timeout error occurs.
For example, the maximum response time to an open
request before the connection is given up should be
reasonably long so that distant connections will be
usable, but short enough that the user will not believe
the computer has hung.
Applications may specify their own timeout value, but
if they chose to use the system default (all my
applications do), the default value may be set from the
WATTCP.CFG file.
SOCKDELAY=seconds
eg. SOCKDELAY=40
The default value is 30 seconds. A smaller value is
unwise, but larger values may be necessary for
particularly bad connections.
Maximum Segment Size
If you understand MSS and know what you would like, you
can change it:
MSS=bytes
eg. MSS=512
Cookie Server
You may specify a cookie server in the WATTCP.CFG file
with the line:
cookie = server
eg. cookie = 129.97.128.1
eg. cookie = sunee.uwaterloo.ca
Up to 10 separate cookie servers may be added. TCPINFO
will list them all. BOOTP will also add cookie
servers.
BOOTP Features and Limitations
BOOTP is not the greatest method of configuration. In
fact there is currently a committee looking at
implementing its successor.
Waterloo TCP programs will automatically get many
configuration parameters from the BOOTP server if those
values are returned:
IP address
subnetmask
gateway (only one will be added)
nameservers (all supplied will be added)
cookieservers (all supplied will be added)
hostname
The domain name cannot be specified currently. Of the
gateways, only one is recorded by Waterloo TCP as they
do not indicate subnets or anything else useful.
Notes: Notes:
The most up-to-date versions of these files, their sources,
and new programs are available on Sunee.uwaterloo.ca by
anonymous FTP. Check out pub/wattcp.
All executables there are copyrighted but are freely
available for use and non-commercial distribution.
The library files which do the actual tcp communications are
also there. They too are copyrighted, but may be used in
commercial and non-commercial work. You are free to do as
you choose. If you intend to program with this package, I
would highly recommend the developers manual described
below.
Developers may wish to join the Waterloo TCP mailing list,
join by mailing to:
wattcp@Development.Watstar.UWaterloo.ca
The programmers manual includes examples, a full reference
of the approximately 50 functions, notes on conversions from
UNIX. The cost is $40 ($US if you live in USA, $Cdn if you
live in Canada. $40 US for anywhere else. Make check or
money order payable to :
Erick Engelke
1010-130 Lincoln Rd.
Waterloo, Ont., Canada
N2J-4N3
The proceeds are entirely used to offset the cost of my
manuals and software costs necessary for improving the
package. The next step is Windows DLL's, but I cannot
afford everything I need to do that.
I have mentioned the public domain CUTCP and NCSA programs
which do an excellent job of TELNET, RSH with VT100
emulation, and much more. You may wish to compare the
programs and use the ones which work best for you.
For their executables, use anonymous ftp to:
omnigate.clarkson.edu 128.153.4.2 for CUTCP
and ???? 128.174.20.50 for NCSA
I hope that this distribution helps you in some way, and I'd
like to thank the contributors,
Bruce Campbell who wrote the original program from
which tcpport was derived. He also wrote the DOS
network I log onto every morning.
Tim Krauskopf's NCSA Name Domain code was used to
develop Waterloo TCP's resolve function.
Edmund J. Sutcliffe donated a good portion of BOOTP.
Jim Martin made a lot of extensions to Edmund's BOOTP
work and was influential in the new nameserver and
new gateway code as well as the COOKIE stuff.
Jason Dent found some bugs and helped optimize WATTCP's
performance.
Dean Roth found some low level bugs and greatly
improved the FTP program.
Although countless others have given me good ideas and
noticed an incorrect line here or there, but none
have been more thorough or helpful than Tarjei
Jensen.
If you would like to add your name to the programmers
list, send me a copy of your program and I'll gladly
include it in the distribution with full credit.
Erick Engelke
Erick@development.watstar.uwaterloo.ca
Waterloo TCP Architect
July 8, 1992
