home *** CD-ROM | disk | FTP | other *** search
/ ftp.wwiv.com / ftp.wwiv.com.zip / ftp.wwiv.com / pub / DOOR / CAM-M145.ZIP / CAM-MAIL.DOC < prev    next >
Text File  |  1994-05-24  |  112KB  |  1,961 lines

  1.                               TABLE OF CONTENTS
  2. DISCLAIMER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
  3.  
  4. LICENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
  5.  
  6. REGISTRATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
  7.  
  8. INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
  9.  
  10. CAM-MAIL SETUP MANAGER CMSetUp.EXE. . . . . . . . . . . . . . . . . . .   7
  11.       BULLETIN SCANNING . . . . . . . . . . . . . . . . . . . . . . . .   7
  12.       COMPRESSION . . . . . . . . . . . . . . . . . . . . . . . . . . .   9
  13.       DOWNLOAD LIMITS . . . . . . . . . . . . . . . . . . . . . . . . .  10
  14.       NEW FILE SCANNING . . . . . . . . . . . . . . . . . . . . . . . .  11
  15.       MISCELLANEOUS PATHS . . . . . . . . . . . . . . . . . . . . . . .  13
  16.       PROTOCOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
  17.  
  18. FORCING CONFERENCE SCANNING . . . . . . . . . . . . . . . . . . . . . .  18
  19.  
  20. FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
  21.  
  22. COMMAND LINE SWITCHES 1 . . . . . . . . . . . . . . . . . . . . . . . .  20
  23.  
  24. COMMAND LINE SWITCHES 2 . . . . . . . . . . . . . . . . . . . . . . . .  21
  25.  
  26. CRC SYSTEM MANAGER. . . . . . . . . . . . . . . . . . . . . . . . . . .  23
  27.  
  28. USER SYSTEM MANAGER . . . . . . . . . . . . . . . . . . . . . . . . . .  24
  29.       Edit User Flags . . . . . . . . . . . . . . . . . . . . . . . . .  25
  30.       Scan Flags. . . . . . . . . . . . . . . . . . . . . . . . . . . .  30
  31.       Registration Flags. . . . . . . . . . . . . . . . . . . . . . . .  30
  32.       NetWork Names Configuration . . . . . . . . . . . . . . . . . . .  32
  33.       Defining NetWork Conferences (Individually) . . . . . . . . . . .  33
  34.       Defining NetWork Conferences (By Range) . . . . . . . . . . . . .  34
  35.  
  36. ECHOING MAIL BETWEEN BBS's. . . . . . . . . . . . . . . . . . . . . . .  36
  37.  
  38. NET MANAGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36
  39.       File Locations. . . . . . . . . . . . . . . . . . . . . . . . . .  36
  40.       Archivers . . . . . . . . . . . . . . . . . . . . . . . . . . . .  37
  41.       NetWork Options . . . . . . . . . . . . . . . . . . . . . . . . .  38
  42.       NetWork Definitions . . . . . . . . . . . . . . . . . . . . . . .  39
  43.       Conference Configuration. . . . . . . . . . . . . . . . . . . . .  41
  44.       EXPORT.EXE. . . . . . . . . . . . . . . . . . . . . . . . . . . .  43
  45.       IMPORT.EXE. . . . . . . . . . . . . . . . . . . . . . . . . . . .  44
  46.  
  47. PRESCANNING MAIL PACKETS. . . . . . . . . . . . . . . . . . . . . . . .  45
  48.       PRESCAN.EXE . . . . . . . . . . . . . . . . . . . . . . . . . . .  45
  49.  
  50. LOCALCAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46
  51.  
  52. PROMPT EDITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48
  53.  
  54. ACKNOWLEDGEMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . .  49
  55.  
  56. TECNICAL HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
  57.  
  58. OTHER SOFTWARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53
  59.      If you are wondering why you should buy Cam-Mail over any other Mail Door,
  60. simply look at the FEATURES and how FAST the mail door runs.  Cam-Mail comes
  61. complete with the Mail-Door, Prescanning Packets, Prompt Editor, Setup/User
  62. Manager, Local Manager, and most importantly, a Net Manager for echoing mail
  63. between BBS's.  If you look at the commercial QWK Doors, you will be paying $70
  64. or more (As you will have to pay extra $$ for the Net Manager).
  65.  
  66. DISCLAIMER
  67.  
  68.       This software is provided without any guarantee, either expressed
  69.       or implied.  All responsibilities for its use rest with the user
  70.       of the software and not the author.
  71.  
  72.       Cam-Mail software and this document are (C) Copyright 1991, 1992 by
  73.       Cam DeBuck Software.  All rights reserved World Wide.
  74.  
  75. LICENSE
  76.  
  77.       Cam-Mail is not in the Public Domain.  Cam-Mail is not free.
  78.       Non-registered users are granted a limited, 30-day license to
  79.       determine whether or not the program meets their needs.
  80.       Continued use of Cam-Mail beyond the 30-day evaluation time
  81.       period requires registration of the program.  Use of non-
  82.       registered copies of Cam-Mail beyond the original evaluation
  83.       period is strictly prohibited.
  84.  
  85.       No one may modify Cam-Mail for any reason, in any way, including
  86.       but not limited to decompiling-compiling, patching,
  87.       disassembling, or reverse engineering the program.
  88.       Cam-Mail may be copied and distributed to others, subject to the
  89.       above restrictions and the following:
  90.  
  91.              * Cam-Mail must be copied in unmodified form, including the
  92.                file containing this license information.
  93.              * Complete Cam-Mail documentation and Online Help must be
  94.                included.
  95.              * No copying fee of any type may be assessed other than basic
  96.                charges for the cost of the copying medium.
  97.              * Cam-Mail may not be distributed with any other software or
  98.                hardware product(s) without the express written permission
  99.                of Cam DeBuck Software.
  100.  
  101.       Sysops (bulletin board SYStem OPerators) may make Cam-Mail
  102.       available for downloading by their users as long as all above
  103.       conditions are met.
  104.  
  105.       Commercial Distributors of Public Domain, ShareWare, or User-
  106.       Supported software may distribute Cam-Mail subject to the above
  107.       conditions only after obtaining specific written permission from
  108.       Cam DeBuck Software and filling out a registration form for
  109.       upgrade notifications.  This condition supersedes any and all
  110.       previous agreements.
  111.                                       REGISTRATION
  112.                      Cam-Mail (For FAST .QWK's) Door v1.45
  113.  
  114.  ****You can Register Online with a credit card as well by calling our BBS!****
  115.                     **** ALL ORDERS ARE SHIPPED OUT ***
  116.      Your registration includes one year of support on our BBS, which allows you
  117. to access any BETA files that are not available to the general public and access
  118. to all of our files/conferences on the BBS.  Once your registration has expired,
  119. you have the option of renewing your support for another year (Renewal is $10.00
  120. for one year).
  121.  
  122. All information must be PRINTED CLEARLY, EXACTLY the way you want it to show up.
  123.  
  124. Sysop Name:___________________________________________
  125.   BBS Name:___________________________________________
  126.  BBS Phone:___________________________________________
  127. Home Phone:___________________________________________(For my Use Only)
  128. Work Phone:___________________________________________(For my Use Only)
  129.   BBS City:___________________________________________
  130. BBSID Code:________________(8 letters Max).  This is the name of your QWK & REP
  131.  
  132. Registration is welcomed by     : personal check or money order.
  133. Registration is also welcomed by: VISA, MasterCard, Diners Club, Carte Blanche,
  134. or JCB cards.
  135.  
  136. Enclosed is $30.00   Registered Version of Cam-Mail v1.45 (5 1/4" Diskette)
  137. Enclosed is $31.00   Registered Version of Cam-Mail v1.45 (3 1/2" Diskette)
  138.  
  139. [ ] Check/Money Order    [ ] Visa    [ ] MasterCard    [ ] Diners Club
  140. [ ] Carte Blanche        [ ] JCB
  141.  
  142.   If using a Credit Card, please fill out the credit card information.
  143.  
  144. Card Number:__________________________________Expiration Date:_________________
  145.  
  146. Card Holder's Signature REQUIRED:______________________________________________
  147.  
  148. Shipping Address:______________________________________________________________
  149.  
  150. _______________________________________________________________________________
  151.  
  152. _______________________________________________________________________________
  153. All orders should be payable to:
  154.  
  155.   Cam DeBuck Software
  156.   P.O. Box 19
  157.   Springville, Utah  84663
  158.   USA
  159.  
  160. *Note, all funds must be in U.S. Dollars!
  161. *DO NOT SEND CASH -- Please use a Personal Check or Money Order!
  162.  
  163. CAM-MAIL INSTALLATION
  164.  
  165.      First, let's make this short and simple.  Follow the instructions
  166. explicitly and nothing can go wrong:
  167.  
  168. 1)  Take ALL nodes down.
  169. 2)  Go into your PCB directory and run PCBSM.EXE
  170. 3)  Go into      D User Info File Maintenance
  171. 4)  Go into      C Add/Update Third Party Application
  172. 5)  Enter Name of Third Party Application? CAM-MAIL
  173. 6)       Version: 1
  174. 7)   Static Size: 60
  175. 8)  Dynamic Size: 1
  176. 9)       KeyWord: MAIL
  177. 10) Press PGDN to begin!
  178.  
  179. 11) At this point you can bring up all your nodes if you would like.
  180.  
  181. 12) Go into your PCB directory and run PCBSETUP.EXE
  182.  
  183. 13) Edit your DOORS.LST file in which conference you have your doors and add the
  184.     door by the name of:  MAIL  (Create USERS.SYS is Yes, Shell = NO)
  185.  
  186. 14) That's it for the PCBoard side of the installation.  Now let's go install
  187.     the door itself.
  188.  
  189. 15) Create a directory called:  \CAM-MAIL  (I suggest from the root directory,
  190.     but it not necessary).  All defaults are setup using the directory
  191.     \CAM-MAIL.
  192.  
  193. 16) Change to the directory you just created and unzip the CAM-M110.ZIP file.
  194.  
  195. 17) Create several directories called:
  196.        \CAM-MAIL\FILES
  197.        \CAM-MAIL\BLTS
  198.        \CAM-MAIL\HELP
  199.        \CAM-MAIL\OFFLINE
  200.     Or if you prefer to use different paths, the CMSetUp will create the new
  201.     paths for you after editing the fields.
  202.  
  203. 18) Run CMSetup and go into E Misc Paths
  204.  
  205. 19) Change the Paths if Necessary and select the Work Drive.
  206.     Be sure CMSM asks you to create the directories to avoid any problems.
  207.  
  208. 20) Select C Download Limits
  209.  
  210. 21) First, a tidbit of information.  As of this writing most Off-Line
  211.     Readers only allow 200 messages per conference.  Please keep that in
  212.     mind when selecting the number of messages per conference. However, for
  213.     NetMail Systems, you can have as many messages as you'd like.
  214.  
  215. 22) It is up to you to select the number of messages the user can
  216.     download per conference and per QWK Packet (Total Messages).
  217.     I personally believe that you should set the number of messages per
  218.     conference to 200 for each Connect Rate.
  219.  
  220.      Connect Rate      Msgs Per Conf    Msgs Per Packet
  221.  
  222.               300                200                200
  223.              1200                200                400
  224.              2400                200                600
  225.              4800                200                800
  226.              9600                200               1000
  227.             14400                200               1000
  228.  
  229. 23) If you have any special security levels (Such as friends or NetMail
  230.     systems) you will probably want to use the Security Specific area for
  231.     these security levels.  The Security Specific area will override the
  232.     Default settings no matter in what Baud Rate they call.  This comes
  233.     in very handy for anybody that you want to give NetStatus to if you're
  234.     acting as a HUB.  This way you won't have to go into this program
  235.     to update their NetStatus flag (The door will automatically do it for
  236.     you).  I have no suggestions for any numbers in this area as it will
  237.     vary for each BBS System.
  238.  
  239. 24) Number of *.QWK's for Upload Credit?  Use this area if you wish to give
  240.     users upload credits for upload QWK packets.
  241.  
  242. 25) UNZIP the HELPMENU.ZIP into your \CAM-MAIL\HELP Directory.
  243.  
  244. ***  ANYTHING BEYOND THIS POINT IS OPTIONAL AND MAY NOT BE REQUIRED ***
  245.  
  246.                      CAM-MAIL SETUP MANAGER CMSetUp.EXE
  247.  
  248. BULLETIN SCANNING
  249.  
  250. This command allows you to choose the Conferences from which the new bulletins
  251. will be scanned and placed into the User's .QWK packet.
  252.  
  253. NOTE: CMSetup.EXE creates a file (If you have bulletins scanned for a particular
  254.       conference) called CAMBxxx (where xxx is the conference number).  I had
  255.       a slight problem previously with people having the same names actual
  256.       bulletin names.  Be sure you don't have this problem by using a
  257.       different path to the Bulletin Files (I suggest the CAM-MAIL directory).
  258.  
  259. 1)  Go into (A) Bulletin Scanning.  Please note, depending on the number of
  260.     conferences that you have, it might take a little bit for CMSM to setup
  261.     the conference information for the bulletins.
  262.  
  263.       STEP 1: Select Conference(s) from those that show up on the new menu on
  264.       your screen.  Hit RETURN.  Another menu will appear on the right side if
  265.       you have any bulletins in this conference.
  266.  
  267.       STEP 2: Select the Bulletin(s) you want to scan for by pressing the RETURN
  268.       key.  A check mark will appear by the bulletins that you have selected.
  269.       To turn a bulletin OFF (after selecting one), use the RETURN key once
  270.       again.
  271.  
  272.       STEP 3: Hit the ESC key to return to the conference area.  A check mark
  273.       will  appear in any conference where you have selected a bulletin.  Note
  274.       that the check marks will disappear when you try to rerun the program.
  275.       This does not mean that your selections have been erased.
  276.  
  277.      An example of the menu is on the next page:
  278. ╔═════════════════════════════════════════════════════════════════════════════╗
  279. ║                        Select New Bulletin Scanning                         ║
  280. ║                                                                             ║
  281. ║       Description of Directory Contents         Scan                        ║
  282. ║       ═══════════════════════════════════       ════                        ║
  283. ║  1)   D:\PCB-STAT\BLT1                           Yes                        ║
  284. ║  2)   D:\PCB\GEN\BLT2                            Yes                        ║
  285. ║  3)   D:\PCB\GEN\BLT3                            No                         ║
  286. ║  4)   D:\PCB\GEN\BLT4                            No                         ║
  287. ║  5)   D:\PCB-STAT\BLT5                           No                         ║
  288. ║                                                                             ║
  289. ║  ESC=Exit   F10=Mark/UnMark For Scanning                                    ║
  290. ╚═══════════════════════════════ F1 ═ Help ═══════════════════════════════════╝
  291.  
  292. COMPRESSION
  293.  
  294.       This command gives you the option to choose the methods of compressing the
  295.       files for the user.  The most dominant method is PKZip.  It was already
  296.       installed in Archive #1 as a default.
  297.  
  298.       STEP 1: Find an empty archive and Name it.
  299.       STEP 2: Add an archive Letter.
  300.       STEP 3: Exit the program and create 2 batch files:
  301.  
  302.                  CAMZIPx.BAT            (Where x is the Archive Letter)
  303.                  CAMUZIPx.BAT           (Where x is the Archive Letter)
  304.  
  305.       CAMZIPx.BAT has 2 parameters passed to it:
  306.  
  307.                  %1 - Path/Name of the .QWK Packet
  308.                  %2 - The Files to be Archived
  309.  
  310.       CAMUZIPx.BAT has 3 parameters to it:
  311.  
  312.                  %1 - The Path/Name of the REP Packet
  313.                  %2 - The File to be UnArchived
  314.                  %3 - The Path of the WORK Directory
  315.                        (a trailing "\" is not included)
  316.  
  317.      An example of the menu looks like this:
  318.  
  319. ╔═════════════════════════════════════════════════════════════════════════════╗
  320. ║                               Cam-Mail v1.45                                ║
  321. ║                                                                             ║
  322. ║ #1  Archiver Name   : PKZip                                                 ║
  323. ║     Archiver Letter : Z                                                     ║
  324. ║                                                                             ║
  325. ║ #2  Archiver Name   :                                                       ║
  326. ║     Archiver Letter :                                                       ║
  327. ║                                                                             ║
  328. ║ #3  Archiver Name   :                                                       ║
  329. ║     Archiver Letter :                                                       ║
  330. ║                                                                             ║
  331. ║ #4  Archiver Name   :                                                       ║
  332. ║     Archiver Letter :                                                       ║
  333. ║                                                                             ║
  334. ║ #5  Archiver Name   :                                                       ║
  335. ║     Archiver Letter :                                                       ║
  336. ║                                                                             ║
  337. ╚═══════════════════════════════ F1 ═ Help ════ Caps: OFF  Num: OFF  Ins: OFF ╝
  338.  
  339. DOWNLOAD LIMITS
  340.  
  341.       This command sets the limits to the amount of Downloading that can be done.
  342. The Messages per Conference amount limits the number of messages from a single
  343. conference that can be downloaded.  The Messages per Packet represents the TOTAL
  344. number of messages that can be downloaded from all the conferences.  These limits
  345. are for NEW USERS and also work as default totals for any user. When a user Logs
  346. On has a specifically set up Security level, the second listing of Messages per
  347. Conference and Packet are limited accordingly.
  348.  
  349.      An example menu looks like this:
  350.  
  351. ╔═════════════════════════╣ Cam-Mail System Manager ╠═════════════════════════╗
  352. ║                                                                             ║
  353. ║  ╒═╣ Download Limits ╠════════════════════════════════════════════════════╕ ║
  354. ║  │                                                                        │ ║
  355. ║  │ Default: Connect Rate  Msgs Per Conf   Msgs Per Packet                 │ ║
  356. ║  │                 300            200               200                   │ ║
  357. ║  │                1200            200               400                   │ ║
  358. ║  │                2400            200               600                   │ ║
  359. ║  │                4800            200               800                   │ ║
  360. ║  │                9600            200              1000                   │ ║
  361. ║  │               14400+           200              1200                   │ ║
  362. ║  │ Security:  Msgs Per Conf  Msgs Per Packet                              │ ║
  363. ║  │   0                0               0                                   │ ║
  364. ║  │   0                0               0                                   │ ║
  365. ║  │   0                0               0                                   │ ║
  366. ║  │   0                0               0                                   │ ║
  367. ║  │   0                0               0                                   │ ║
  368. ║  │                                                                        │ ║
  369. ║  │  Number of *.QWK's for Upload Credit (0 = NONE) : 0                    │ ║
  370. ║  │                                                                        │ ║
  371. ║  │                                                                        │ ║
  372. ║  │                                                                        │ ║
  373. ║  ╘════════════════════════════════════════════════════════════════════════╛ ║
  374. ║                                                                             ║
  375. ╚═════════════════════════════════════════════════════════════════════════════╝ NEW FILE SCANNING
  376.  
  377.       The CMSetup.EXE creates a file called CAMFxxx (where xxx is the conference
  378. number).  Be sure that the names for your actual DIR files are different.  [You
  379. may want to use Cam-Mail for that solution.]  I had slight problem previously
  380. with people having the same names for their actual DIR files.  Be sure you don't
  381. have this problem by using a different path to the New Files Directory.  The path
  382. to your New Files Directory (Defined in CMSetup) should point to a directory off
  383. of your CAM-MAIL Directory.
  384.  
  385.  
  386.       STEP 1: Go into (D) Files Scanning.  Please note, depending on the number
  387.       of conferences that you have, it might take a little bit for CMSetup to
  388.       setup the conference information for the File Listings.
  389.  
  390.       STEP 2: Select a Conference(s) that you wish to have Directories Scanned
  391.       and hit RETURN (These are your DIRxx files).
  392.  
  393.       A) Another menu will pop up on the side if you have any DIR's in
  394.          this conference.
  395.       B) Now select the DIR you want to scan for by pressing the RETURN
  396.          key. A check mark will appear by DIR's that you have selected.
  397.          To turn a DIR off (after selecting one), use the RETURN key
  398.          once again.
  399.       C) In most cases you will only want to select DIR's that are updated
  400.          on a Daily, Weekly, or Monthly Basis.  This would definitely
  401.          include your Upload Directory.
  402.  
  403.  
  404.       STEP 3: Hit the ESC key to return to the conference area.  A check mark
  405.       will appear in any conference where you have selected a bulletin to scan.
  406.       Note that the check marks will disappear when you try to rerun CMSetup.
  407.       This does NOT mean your selections have been erased.
  408.  
  409.      An example of the menu is on the next page:
  410. ╔═════════════════════════════════════════════════════════════════════════════╗
  411. ║                          Select New File Scanning                           ║
  412. ║                                                                             ║
  413. ║       Description of Directory Contents         Scan                        ║
  414. ║       ═══════════════════════════════════       ════                        ║
  415. ║  1)   Amateur radio programs.                    No                         ║
  416. ║  2)   Archive utilities, ZIP, PAK, etc.          No                         ║
  417. ║  3)   Assembly & C programs & related.           No                         ║
  418. ║  4)   Astronomy programs & files.                No                         ║
  419. ║  5)   Programs for the AT only.                  No                         ║
  420. ║  6)   Batch file generators, builders etc        No                         ║
  421. ║  7)   Bulletin board phone number lists.         No                         ║
  422. ║  8)   Bulletin board news items. (Text)          No                         ║
  423. ║  9)   PCBoard BBS utilities and items.           No                         ║
  424. ║ 10)   RBBS system and utility files.             No                         ║
  425. ║ 11)   All other public domain BBS systems        No                         ║
  426. ║ 12)   Business programs and related files        No                         ║
  427. ║ 13)   Chemistry programs and files.              No                         ║
  428. ║ 14)   Children's games & educational.            No                         ║
  429. ║ 15)   Color monitor only programs.               No                         ║
  430. ║ 16)   Communications programs.                   No                         ║
  431. ║ 17)   Recent Uploads                             Yes                        ║
  432. ║                                                                             ║
  433. ║  ESC=Exit   F10=Mark/UnMark For Scanning                                    ║
  434. ╚═══════════════════════════════ F1 ═ Help ═══════════════════════════════════╝
  435.  
  436. MISCELLANEOUS PATHS
  437.  
  438.   Path to PCBOARD.DAT    - This is the Directory for the PCBOARD.DAT file.
  439.                            All of the Cam-Mail utilities (Export, Import,
  440.                              UserSM, LocalCam, and Prescan) will use the
  441.                            PCBOARD.DAT from this path (i.e. C:\PCB).
  442.   Path to HELP Files     - This is the path for the Cam-Mail HELP files and NOT
  443.                            the PCBoard HELP files.  This should be in your Cam-
  444.                              Mail Directory (i.e. C:\CAM-MAIL\HELP).
  445.   Path to OFFLINE Files  - This is the Directory where PRESCAN.EXE places the
  446.                               .QWK files (i.e. C:\CAM\MAIL\OFFLINE).
  447.   Path to Bulletin Files - This is the path where CMSetup will
  448.                               store its Config files for Bulletin Information
  449.                            (i.e. C:\CAM-MAIL\BLT).
  450.   Path to New Files      - This is the path where CMSetup will store its Config
  451.                            files for New Files Information (i.e. C:\CAM-
  452.                            MAIL\FILES)
  453.   Path/Name of NEWUSER  -  This is the PATH/NAME of the NEWUSER file.  When a
  454.                            caller for the first time opens the door, this file
  455.                            will be displayed to them.  You can modify this file
  456.                            to fit your needs.  (i.e. C:\CAM-MAIL\HELP\NEWUSER).
  457.  Path of CRC Files       - This is where the CRCSM.EXE program will create the
  458.                            Duplicate checking files.  (i.e. C:\CAM-MAIL)
  459.  Path to NET file(s)     - This is where the NETSM.EXE program will create the
  460.                            files that it uses. (i.e. C:\CAM-MAIL\NET)
  461.  Drive LETTER of Work DIR - This is the DRIVE Letter that you wish the CAM-MAIL
  462.                            program to create a temporary work directory.  This
  463.                            work directory will be created off the ROOT directory
  464.                            and will be called \MWORK@NODE@ (Where @NODE@
  465.                            represents the Node Number).
  466.  Path to QWK files       - This is the directory where CAM-MAIL.EXE will create
  467.                            QWK packets when using the door locally.  This should
  468.                            point to the same directory that you have setup your
  469.                            Offline Reader to look for the QWK packets.
  470.  Path to REP files       - This is the directory where CAM-MAIL.EXE will look
  471.                            for the .REP file when uploading the .REP file in
  472.                            local mode.  This should point to the same directory
  473.                            that you have setup your Offline Reader to store your
  474.                            .REP files.
  475.  
  476.      An example of the menu is on the next page:
  477. ╔═════════════════════════════════════════════════════════════════════════════╗
  478. ║                               Cam-Mail v1.45                                ║
  479. ║                                                                             ║
  480. ║ Path to PCBOARD.DAT            : D:\PCB\                                    ║
  481. ║ Path to HELP Files             : C:\CAM-MAIL\HELP\                          ║
  482. ║ Path to OFFLINE Files          : C:\CAM-MAIL\OFFLINE\                       ║
  483. ║ Path to Bulletin Config Files  : C:\CAM-MAIL\BLT\                           ║
  484. ║ Path to NewFiles Config Files  : C:\CAM-MAIL\FILES\                         ║
  485. ║ Path to CRC Files              : C:\CAM-MAIL\CRC\                           ║
  486. ║ Path to NET Files              : C:\CAM-MAIL\NET\                           ║
  487. ║ Path to LOCAL QWK Files        : C:\CAM-MAIL\QWK\                           ║
  488. ║ Path to LOCAL REP Files        : C:\CAM-MAIL\REP\                           ║
  489. ║ Path/Name of NEWUSER File      : C:\CAM-MAIL\HELP\NEWUSER                   ║
  490. ║                                                                             ║
  491. ║ Drive LETTER of WORK Directory : F                                          ║
  492. ║                                                                             ║
  493. ╚═══════════════════════════════ F1 ═ Help ════ Caps: OFF  Num: OFF  Ins: OFF ╝
  494.  
  495. PROTOCOLS
  496.  
  497.                                   INTERNAL
  498.  
  499.      You have the option of turning the Internal Protocols ON or OFF.  I suggest
  500. that you leave them all ON.
  501.  
  502.      An example of the menu looks like this:
  503.  
  504. ╔═════════════════════════════════════════════════════════════════════════════╗
  505. ║                               Cam-Mail v1.45                                ║
  506. ║                                                                             ║
  507. ║   Protocol Name: Xmodem (Checksum)        Protocol Name: Xmodem (CRC)       ║
  508. ║ Protocol Letter: X                      Protocol Letter: C                  ║
  509. ║         Enable : Y                              Enable : Y                  ║
  510. ║                                                                             ║
  511. ║   Protocol Name: 1K-Xmodem                Protocol Name: 1K-Xmodem/G        ║
  512. ║ Protocol Letter: O                      Protocol Letter: F                  ║
  513. ║         Enable : Y                              Enable : Y                  ║
  514. ║                                                                             ║
  515. ║   Protocol Name: Ymodem Batch             Protocol Name: Ymodem/G Batch     ║
  516. ║ Protocol Letter: Y                      Protocol Letter: G                  ║
  517. ║         Enable : Y                              Enable : Y                  ║
  518. ║                                                                             ║
  519. ╚═══════════════════════════════ F1 ═ Help ════ Caps: ON   Num: OFF  Ins: OFF═╝
  520.  
  521.                                   EXTERNAL
  522.  
  523.       You can have up to 10 different External Protocols.
  524.  
  525. In the UPPER LEFT HAND CORNER is the DEFAULT protocol for NEW USERS.  I suggest
  526. that you have Zmodem in this position.  If this is your first   installation,
  527. it has already been done for you.
  528.  
  529.       STEP 1: Find a blank protocol and add a protocol name
  530.  
  531.       STEP 2: Enter the protocol letter
  532.  
  533.       STEP 3: The ARQ option should be set to YES  if this protocol requires an
  534.       Error Correcting Modem (MNP or such).  Protocols such as Ymodem-G and
  535.       Xmodem-G require Error Correcting Modems and have been installed as
  536.       Internal Protocols.
  537.  
  538.       STEP 4: Exit the Cam-Mail SetUp.  Be sure to SAVE the information.
  539.       Then create 2 batch files:
  540.  
  541.                  CAMRx.BAT   (where x is the Protocol Letter)
  542.                  CAMSx.BAT   (where x is the Protocol Letter)
  543.  
  544.     Both of these files work exactly as PCBoard does for external Protocols.
  545.     Please see your PCBoard documentation on how to implement these. If you
  546.     already have some PCBoard external Protocols, simply copy over your
  547.     PCBRx.BAT and PCBSx.BAT and rename them appropriately.  Cam-Mail will work
  548.     just fine with these.  In case you don't have your PCBoard manual handy
  549.     here are what each % value represents:
  550.  
  551.       %1 - Com Port Number
  552.       %2 - PC to Modem Speed (DTE)
  553.       %3 - Path/Name of File to Transfer
  554.       %4 - Connect Speed displayed by PCBoard to the Caller
  555.       %5 - Carrier Speed
  556.       %6 - Path to the WORK directory (For Bi-Directional Protocols)
  557.  
  558. Now UNZIP the HELPMENU.ZIP into your HELP directory that you specified in
  559. the CMSM.EXE program.  Be sure that you put the NEWUSER file in the proper
  560. directory.
  561.  
  562.      An example of the menu is on the next page:
  563. ╔═════════════════════════════════════════════════════════════════════════════╗
  564. ║                               Cam-Mail v1.45                                ║
  565. ║                                                                             ║
  566. ║ Protocol Name  : Zmodem                 Protocol Name  :                    ║
  567. ║ Protocl Letter : Z                      Protocl Letter :                    ║
  568. ║ MNP Connect    : N                      MNP Connect    : N                  ║
  569. ║                                                                             ║
  570. ║ Protocol Name  :                        Protocol Name  :                    ║
  571. ║ Protocl Letter :                        Protocl Letter :                    ║
  572. ║ MNP Connect    : N                      MNP Connect    : N                  ║
  573. ║                                                                             ║
  574. ║ Protocol Name  :                        Protocol Name  :                    ║
  575. ║ Protocl Letter :                        Protocl Letter :                    ║
  576. ║ MNP Connect    : N                      MNP Connect    : N                  ║
  577. ║                                                                             ║
  578. ║ Protocol Name  :                        Protocol Name  :                    ║
  579. ║ Protocl Letter :                        Protocl Letter :                    ║
  580. ║ MNP Connect    : N                      MNP Connect    : N                  ║
  581. ║                                                                             ║
  582. ║ Protocol Name  :                        Protocol Name  :                    ║
  583. ║ Protocl Letter :                        Protocl Letter :                    ║
  584. ║ MNP Connect    : N                      MNP Connect    : N                  ║
  585. ║                                                                             ║
  586. ╚═══════════════════════════════ F1 ═ Help ════ Caps: ON   Num: OFF  Ins: OFF ╝
  587.  
  588.  
  589. FORCING CONFERENCE SCANNING
  590.  
  591.   If you wish to FORCE users to scan a particular conference here's what you
  592. need to do:
  593.  
  594.   1)  First create a file called FORCExxx (Where xxx represents the security
  595.       level of the users) in the Cam-Mail directory.
  596.  
  597.   2)  In this file you need to add the conference number followed by a ';'
  598.       and the type of conference scan.  You can have up to 25 Forced
  599.       Conferences.  Example:
  600.  
  601.         0;A
  602.         5;Y
  603.         10;B
  604.  
  605.      The above example will force the user to scan 3 conferences:
  606.  
  607.          Conference #0 (Scans All Messages and exports them)
  608.          Conference #5 (Scans for only messages to the USER)
  609.          Conference #10 (Scans for messages to ALL and the USER)
  610.  
  611. CAM-MAIL FILES
  612.  
  613. If you are running a Multi-Node BBS please be aware that you MUST make ALL
  614. .BAT and your .EXE files in the Cam-Mail directory as READ-ONLY.  You do this by
  615. using the ATTRIB file.  Once you have everything setup, go into your CAM-MAIL
  616. directory and type:
  617.  
  618.     ATRRIB +r *.BAT
  619.     ATRRIB +r *.EXE
  620.  
  621. This will prevent share violations on the BATCH files.  Now all you need to do
  622. is make your MAIL batch file to load the door.  There several command line
  623. switches which need to be passed to Cam-Mail.
  624.  
  625. IMPORTANT:  You NEED to run the CAM-MAIL.EXE in the CAM-MAIL directory.  DO
  626.             NOT run it from your PCB directory.
  627.  
  628.                                 CAM-MAIL.EXE COMMAND LINE SWITCHES 1
  629.  
  630. Here is the information for the command line switches that NEED to be passed
  631. to CAM-MAIL.EXE:
  632.  
  633. CAM-MAIL.EXE Path_To_PCB_Directory BiosWrites(YES/NO) Optionals
  634.  
  635. Examples:
  636.  
  637.   CAM-MAIL.EXE C:\PCB NO
  638.  
  639. This would tell Cam-Mail that your PCBoard Directory is at C:\PCB and that you
  640. do not want Bios Writes.
  641.  
  642.   CAM-MAIL.EXE C:\PCB YES G
  643.  
  644. This would tell Cam-Mail that your PCBoard Directory is at C:\PCB and that you
  645. do want Bios Writes and that you want to override the configuration Work Drive
  646. to the G Drive.
  647.  
  648. Please note that the first TWO switches are necessary and need to be in order.
  649. The other ones are options.  I had some Beta Testers who had different Ram Disks
  650. on each Node so they needed a way to override the configuration work drive.
  651.  
  652.                     CAM-MAIL.EXE COMMAND LINE SWITCHES 2
  653.  
  654. NOTE:  There are several extra options for maintaining your Mail Door.  These are
  655.        as follows:
  656.  
  657.  
  658.          Letter    - The RAM DRIVE Letter to use for a WORK Drive.
  659.          /CFG:name - If you want to use a separate configuration file for each
  660.                      node, replace name with the name of the config file.
  661.          /DUPON    - Force Duplicate Checking (Be sure you run CRCSM.EXE)
  662.          /NETCONF  - If you are a HUB and have NODES calling you, you can have
  663.                      Cam-Mail so they will only be able to access conferences
  664.                      that they have NetStatus in.
  665.          /NOCHECK  - If you run a LOT of conferences, you may want to use this
  666.                      option.  When Cam-Mail loads for a user, it normally checks
  667.                      for any Public Conferences that the user is not registered
  668.                      in.  If you have a LOT of conferences, then can take a
  669.                      minute or two.  Some users don't like waiting.  By adding
  670.                      this switch, the door will skip the initialization process
  671.                      of checking for public conferences.
  672.          /NOTIME   - Do Not charge user time for using the door.
  673.          /NOWINDOW - The BOX Window will be disabled for External Shells
  674.          /READ     - If you want the door to update the READ flag on a message
  675.                      (if the message is addressed to the user) when a user
  676.                      downloads a QWK packet, then use this option.  Otherwise,
  677.                      the READ flag is not updated until they upload a REPLY to
  678.                      the message.
  679.          /WORK:xxx - If you do not want your WORK Directory to be off of the
  680.                      ROOT Directory, you can specify a different PATH.  This is
  681.                      a very TRICKY switch.  DO NOT give the DRIVE Letter and :\
  682.                      as the Path.  A VALID example looks like this:
  683.  
  684.                        CAM-MAIL.EXE C:\PCB NO /WORK:CAM-MAIL\WORK
  685.  
  686.                      If you have any difficulties with this switch, please give
  687.                      us a voice call and we will get things working for you.
  688.  
  689.   These switches MUST follow the other command line switches.  Here is an
  690. example of how to use three optional switches:
  691.  
  692.   CAM-MAIL.EXE C:\PCB NO Z /DUPON /NOWINDOW
  693.  
  694.   This would use your ram disk designated as Drive Z, force duplicate checking,
  695. and will use No Windows for external shells.  MAIL BATCH FILE
  696.  
  697.      It's very important that your MAIL batch file is configured properly.  If
  698. it isn't, it is possible that the door will not work properly, and it is possible
  699. that you will get sharing violations if you run a multi-node BBS.
  700.  
  701.      The BATCH file is as follow:
  702.  
  703.   REM - DO NOT REMOVE this SET DSZLOG= line
  704.   SET DSZLOG=ZLOG%PCBNODE%
  705.  
  706.   CD \CAM-MAIL
  707.   if exists %DSZLOG% then DELETE %DSZLOG%
  708.  
  709.   CAM-MAIL.EXE %PCBDRIVE%%PCBDIR% NO
  710.   %PCBDRIVE%
  711.   CD %PCBDIR%
  712.   BOARD.BAT
  713.  
  714.  
  715. CAM-MAIL CRC SYSTEM MANAGER
  716.  
  717. Once installed the Cam-Mail system provides a way to stop users from uploading
  718. duplicate messages.  Depending on the number of messages imported everyday, you
  719. may need to run this program on a weekly basis.  I suggest every two weeks.
  720.  
  721.   The ONLY thing that is necessary for this program is to make sure you
  722. have defined your CRC PATH in the CMSetUp.EXE program.  The CRCSM.EXE should go
  723. in your CAM-MAIL directory.
  724.  
  725.  
  726.   This program creates 2 files and Cam-Mail will create one more additional file:
  727.  
  728.    CAMCRC     -  Created by CRCSM.EXE
  729.    CAMCRC.OFS -  Created by CRCSM.EXE
  730.    CAMCRC.NEW -  Created by CAM-MAIL.EXE
  731.  
  732.  
  733. NOTE:  Cam-Mail CREATES and USES only these THREE files to check for duplicate
  734.        checking.  This insures that no WASTED space goes to creating
  735.        a lot of CRC files and also that the speed is quite efficient to satisfy
  736.        anybody.
  737.  
  738.  
  739. CAM-MAIL USER SYSTEM MANAGER
  740.  
  741.      The USERSM.EXE is a very powerful program that works with the CAM-MAIL.EXE
  742. program.  It will allow you to edit your USERS records for Cam-Mail and it will
  743. also allow you to Add any NetWork names of your choice (Up to 48).  By setting
  744. up the mail door using specific NetWork names, this will allow you users to
  745. easily select conferences of their choice by a specific NetWork.
  746.  
  747.      Since you are the Sysop of your BBS, you do NOT have to define any
  748. NetWorks.  The setting up of NetWorks is simply makes your life easier.  If you
  749. are a HUB for a specific NetWork and have NODES that will be calling you for
  750. mail,  With a few simply KeyStrokes they will automatically have NETSTATUS
  751. in NetWork conferences of your choice.   And if the user has not been in the
  752. door before, their conference flags will automatically be set to.  You may find
  753. this useful to ensure that they download mail in conferences that are REQUIRED
  754. to take.
  755.  
  756.      That's the basic general information.  Now let's do some work and see what
  757. we can come up with.
  758.  
  759.      Below you will find an example of the first screen that will be shown to
  760. you when you invoke the USERSM.EXE program.  The program is divided into four
  761. different areas (labeled A through D).  You can move to these specific areas
  762. by using the arrow keys on your keyboard and hitting return, or you can simply
  763. enter the LETTER of that specific area that you want to run.
  764.  
  765.  
  766. ╔═════════════════════════════════════════════════════════════════════════════╗
  767. ║                        Cam-Mail v1.45 User Manager                          ║
  768. ║                     Copyright (C) 1994 Cam DeBuck Software                  ║
  769. ║                                                                             ║
  770. ║   ╓────────────────────────────────────────────────────────────────────╖    ║
  771. ║   ║                        Cam-Mail Main Menu                          ║    ║
  772. ║   ║────────────────────────────────────────────────────────────────────║    ║
  773. ║   ║               A  Edit User Flags                                   ║    ║
  774. ║   ║               B  NetWork Names                                     ║    ║
  775. ║   ║               C  NetWork Conference (Individual)                   ║    ║
  776. ║   ║               D  NetWork Conference (Range)                        ║    ║
  777. ║   ║                                                                    ║    ║
  778. ║   ║                                                                    ║    ║
  779. ║   ║                                                                    ║    ║
  780. ║   ║                                                                    ║    ║
  781. ║   ║                                                                    ║    ║
  782. ║   ║                                                                    ║    ║
  783. ║   ║                                                                    ║    ║
  784. ║   ║                                                                    ║    ║
  785. ║   ║                                                                    ║    ║
  786. ║   ║                                                                    ║    ║
  787. ║   ║                                                                    ║    ║
  788. ║   ║                                                                    ║    ║
  789. ║   ╙ Use arrow keys to move - Press Enter to Select - Press ESC to Exit ╜    ║
  790. ╚═════════════════════════════════════════════════════════════════════════════╝ (A) Edit User Flags
  791.  
  792.      There are THREE screens that will be shown to you depending on the KEY
  793. that you hit.  Below is the default screen that comes up.
  794.  
  795. ╔═════════════════════════════════════════════════════════════════════════════╗
  796. ║                        Edit User Record (Net Info)     Record     2 of   681║
  797. ║                                                                             ║
  798. ║ Name        : CAM DEBUCK                   Used Door Before (YES)           ║
  799. ║                                            Alt-F  Find a user name          ║
  800. ║ Net Status               : N               Alt-T  Jump to the Top record    ▒
  801. ║ Net ID Number            :     2           Alt-B  Jump to the Bottom record ▒
  802. ║ OffLine Packets          : N               REP's Uploaded  :      9         ▒
  803. ║ Offline Packet Name      : DEBUCK          QWK's Downloaded:     24         ▒
  804. ║ Users ALIAS Name         :                                                  ▒
  805. ║                                                                             ▒
  806. ║ Send WELCOME File        : Y                                                ▒
  807. ║ Send NEWS File           : Y                                                ▒
  808. ║ Send GOODBYE File        : Y                                                ▒
  809. ║ Send New BLTS            : Y            Max Msgs Per Conference  :     0    ▒
  810. ║ Send New UPLOADS         : Y            Total Msgs Per QWK       :     0    ▒
  811. ║                                                                             ▒
  812. ║ Update Mail Waiting Flag : Y            Create NDX files for QWK : Y        ▒
  813. ║ Use Color QWK Packets    : Y            Expert Mode              : Y        ▒
  814. ║ Duplicate Checking On    : Y            Send Replies with QWK    : Y        ▒
  815. ║ Protocol Letter          : Y                                                ▒
  816. ║                                                                             ║
  817. ║ Press ALT-A to Add to NetWork,  Press F2 to rotate between different views  ║
  818. ║ ESC=Exit    PgDn=Forw    PgUp=Back    Ctrl-PgDn=Forw20    Ctrl-PgUp=Back20  ║
  819. ╚═════════════════════════════════════════════════════════════════════════════╝
  820.  
  821.  
  822.   Below is a description of all the options in the DEFAULT screen:
  823.  
  824.               Net Status:  Set this to YES if a user will be ECHOING mail
  825.                            between YOUR BBS and the USERS BBS.  The Net ID
  826.                            Number works in conjunction with this feature.  The
  827.                            users Scan Flags (Described Later) must also be set
  828.                            for each conference.  You can use this field to
  829.                            temporarily disable NetStatus if the user is
  830.                            uploading too many duplicate messages.  Once they
  831.                            fix their duplicate message problem, simply turn
  832.                            this feature back on and they will be able to echo
  833.                            mail.
  834.  
  835.            Net ID Number:  This Number should NEVER be set to 0 or 1 and no
  836.                            two users should have the SAME Number.  Each user
  837.                            that has NetStatus should have a unique number.  I
  838.                            suggest that their Users Record Number be used.
  839.                            Never give YOU (The Sysop) Net Status.  There's
  840.                            no need for it and you will only cause yourself
  841.                            problems.
  842.  
  843.          Offline Packets:  This feature works in conjunction with the
  844.                            PRESCAN.EXE program.  By setting this to YES, you
  845.                            can create a QWK packet for your user in your
  846.                            nightly event.  You mush also give the user a
  847.                            unique Offline Packet Name (Described Below).
  848.  
  849.      Offline Packet Name:  This is an 1 to 8 letter packet name (NEVER give
  850.                            an extension of ".QWK").  It must be a valid
  851.                            DOS filename.
  852.  
  853.         Users ALIAS Name:  This works in conjunction with the Users SCAN flags
  854.                            (Describe in detail later).  The Users SCAN flags
  855.                            options must contained the letter "L" (Which stands
  856.                            for alias) in a specific conference.  Some networks
  857.                            allow users to have a name that is NOT REAL.  By
  858.                            using this feature, the user can use an alias in a
  859.                            specific conference, yet he/she will still be using
  860.                            their real name in all of the other conferences.
  861.  
  862.        Send WELCOME File:  This will send the WELCOME file in their QWK
  863.                            packets.  This is the opening screen that is
  864.                            displayed to them when they first log onto the BBS.
  865.                            If a user has NetStatus, this should usually be set
  866.                            to NO since (most likely) they won't be using an
  867.                            off-line reader to read the mail.  This file will
  868.                            be sent EVERY TIME (Regardless of the DATE/TIME on
  869.                            the file).
  870.  
  871.           Send NEWS File:  This will send the NEWS file in their QWK packets.
  872.                            If a user has NetStatus, this should usually be set
  873.                            to NO since (most likely) they won't be using an
  874.                            off-line reader to read the mail.  This file will
  875.                            be sent EVERY TIME (Regardless of the DATE/TIME on
  876.                            the file).
  877.  
  878.        Send GOODBYE File:  This will send the GOODBYE file in their QWK
  879.                            packets.  This is displayed to the user when they
  880.                            log off the BBS (Not all BBS's have a GOODBYE file).
  881.                            This file is usually called SCRIPT0 in PCBSetup.
  882.                            If a user has NetStatus, this should usually be set
  883.                            to NO since (most likely) they won't be using an
  884.                            off-line reader to read the mail.  This file will
  885.                            be sent EVERY TIME (Regardless of the DATE/TIME on
  886.                            the file).
  887.  
  888.            Send New BLTS:  If you have defined any Bulletins for scanning
  889.                            (Use CMSETUP.EXE to defined New Bulletins), Cam-Mail
  890.                            will scan for new bulletins (Checking the DATE/TIME
  891.                            on the file vs. their Last Date/Time on the BBS).  If
  892.                            a new Bulletin is found, it will be inserted in
  893.                            their QWK packets.  If the Bulletin file uses
  894.                            PCBoard Color Codes, Cam-Mail will add ANSI ESCAPE
  895.                            sequences if they have the "Use COLOR in QWK
  896.                            packets" set to Yes.
  897.  
  898.         Send New UPLOADS:  If you have defined any DIR files for scanning
  899.                            (Use CMSETUP.EXE to defined New Files), Cam-Mail
  900.                            will scan for new files (Checking the DATE/TIME
  901.                            on the file vs. their Last Date/Time scanning for
  902.                            files).  If a new files is found, it will be
  903.                            inserted in their QWK packets.  Color DIR files
  904.                            is not supported.
  905.  
  906.  Max Msgs Per Conference:  This describes the maximum number of messages the
  907.                            user wants to download in each conference.  If this
  908.                            value is set to 0, then Default Settings are used
  909.                            for their CONNECT speed (Allowing them the maximum
  910.                            number of messages you have defined in CMSETUP.EXE).
  911.                            The user can never download more than the DEFAULT
  912.                            settings for his CONNECT speed.  This insures
  913.                            that you won't run out of DISK Space.
  914.  
  915.       Total Msgs Per QWK:  This describes the maximum number of messages the
  916.                            user wants to download for each QWK packet.  If this
  917.                            value is set to 0, then Default Settings are used
  918.                            for their CONNECT speed (Allowing them the maximum
  919.                            number of messages you have defined in CMSETUP.EXE).
  920.                            The user can never download more than the DEFAULT
  921.                            settings for his CONNECT speed.  This insures
  922.                            that you won't run out of DISK Space.
  923.  
  924. Update Mail Waiting Flag:  When a user uploads a REP file, they have the option
  925.                            to update the recipients Mail Waiting Flags.  If
  926.                            the user sets this to Yes, then the recipient of
  927.                            the message will be notified when they log on that
  928.                            they have mail waiting in a specific conference.
  929.                            This slows down the inserting message process.
  930.                            Users with NetStatus should have this set to NO so
  931.                            they can get on and off as fast as possible to
  932.                            reduce their phone bill (If calling long distance).
  933.  
  934.    Use Color QWK Packets:  This will add ANSI ESC sequences to the callers
  935.                            QWK packet for certain files.  This ONLY works
  936.                            if you are using PCBoard Color Codes in your BLT,
  937.                            GOODBYE, WELCOME and NEWS files.  Some readers do
  938.                            not support the PCBoard Color codes and may not
  939.                            support ANSI Escape sequences.    Duplicate Checking On:  When a user uploads a REP file, they have the option
  940.                            to check to see if they are uploading duplicate
  941.                            messages.  This insures that users won't have to
  942.                            read their messages twice.  The Sysop may FORCE this
  943.                            option in the mail door by using the /DUPS command
  944.                            line switch when invoking CAM-MAIL.EXE (Which is
  945.                            describe somewhere else in this documentation).
  946.  
  947.          Protocol Letter:  This is the Protocol Letter that the user is using
  948.                            to download/upload their QWK/REP files.
  949.  
  950. Create NDX Files for QWK:  Some readers have the ability to create the .NDX
  951.                            files if they don't exist.  By setting this option
  952.                            to NO, they can spend less time in downloading a QWK
  953.                            packet.  If a user has NetStatus, the .NDX files
  954.                            will NOT be created regardless of this setting.
  955.  
  956.              Export Mode:  This is whether or not the user is in export mode.
  957.                            By setting this value to YES, the Opening Screen
  958.                            will NOT be displayed, along with all of the other
  959.                            MENUS.
  960.  
  961.    Send Replies with QWK:  When a user uploads his/her REP packet, they have
  962.                            the option of sending these messages in their QWK
  963.                            packet.  Users with NetStatus will NOT be sent
  964.                            their own messages regardless of what this option
  965.                            is set to.
  966.  
  967.  
  968.  By pressing the F2 key, this next screen will be displayed:
  969.  
  970. ╔═════════════════════════════════════════════════════════════════════════════╗
  971. ║                      Edit User Record (Conferences)    Record     1 of   681║
  972. ║                                                          Page     1 of     7║
  973. ║ Name        : CAM DEBUCK                                                    ║
  974. ║(Flags) A=All Mail  B=YOUR & ALL Mail  Y=YOUR Mail  N=NetStatus  R=Rcvr Only ║
  975. ║        L=Alias     E=NonEcho Allowed                                        ▒
  976. ║ Num   Conference     Flags  Net Work   Num   Conference     Flags  Net Work ▒
  977. ║───── ─────────────   ─────  ────────  ───── ─────────────   ─────  ──────── ▒
  978. ║    0 Main Board    : A      Local        15 KMail         :        U'NI-Net ▒
  979. ║    1 Svalvards     : A      Local        16               :        U'NI-Net ▒
  980. ║    2 PCB-Deposit   : A      Local        17               :        U'NI-Net ▒
  981. ║    3 Excalibur     :        Local        18 Movies        :        U'NI-Net ▒
  982. ║    4 Camster       :        Local        19 ProComm       :        U'NI-Net ▒
  983. ║    5 Cam-Mail      :        Local        20 Courier       :        U'NI-Net ▒
  984. ║    6 Sysop         :        U'NI-Net     21 TeenClub      :        U'NI-Net ▒
  985. ║    7 EzReader      : L      U'NI-Net     22               :        U'NI-Net ▒
  986. ║    8 MarkMail-Rnet :        U'NI-Net     23               :        U'NI-Net ▒
  987. ║    9               :        U'NI-Net     24               :        U'NI-Net ▒
  988. ║   10 TeleCommuting :        U'NI-Net     25 Media         :        U'NI-Net ▒
  989. ║   11 RoboComm      :        U'NI-Net     26 FastGraph     :        U'NI-Net ▒
  990. ║   12               :        U'NI-Net     27               :        U'NI-Net ▒
  991. ║   13               :        U'NI-Net     28               :        U'NI-Net ║
  992. ║   14 PCBSysop      :        U'NI-Net     29 CamSoft       :        U'NI-Net ║
  993. ║ ESC=Exit    PgDn=Forw    PgUp=Back    F2=Toggle Back to Normal Mode         ║
  994. ╚═════════════════════════════════════════════════════════════════════════════╝
  995.  
  996.  
  997.      The screen above is the conference registration and scan flags.  By
  998. registration flags, I mean whether or not the user has Net Status, Receiver
  999. Only Status, Alias Status, or Non-Echo Status in a specific conference.  By
  1000. scan flags, I mean which type of Mail Scanning I should do.
  1001.  
  1002.  
  1003. Scan Flags
  1004.  
  1005.      There are three types of Mail Scanning that can be done for each user.
  1006. Only ONE of these scan types can be done for each user.  They are described
  1007. below:
  1008.  
  1009.        A =  This means that CAM-MAIL.EXE should scan for mail since the user
  1010.             was last on.  This is all the mail that the user has access to
  1011.             (Meaning security wise).
  1012.  
  1013.        B =  This means that CAM-MAIL.EXE should scan for mail that is addressed
  1014.             to the User and mail that is addressed To: "ALL".  This type of
  1015.             scan flag can be useful for conferences like the ForSale conference
  1016.             where all they will be interested in is mail to them and messages
  1017.             that are addressed to "ALL".
  1018.  
  1019.        Y =  This means that CAM-MAIL.EXE should scan for mail that is
  1020.             addressed to the User.
  1021.  
  1022. Registration Flags
  1023.  
  1024.      There are four types of registration flags.  A user can have all four of
  1025. these flags set.  They are described below:
  1026.  
  1027.        E =  This means that a user with NetStatus can receive mail that does
  1028.             not have ECHO Status.  This may be necessary if for some reason
  1029.             your program that you are using is not setting the ECHO status
  1030.             for your messages that you are importing.
  1031.  
  1032.        L =  This will allow users to have an Alias in a specific conference
  1033.             (If you have defined their Alias name in the default screen).
  1034.             Some networks allow users to have an alias in specific conferences.
  1035.             This can come in handy if you have users who need this feature.
  1036.  
  1037.        N =  This will allow the user to Echo Mail between BBS's.  This should
  1038.             only be set if you want them to echo mail.  "Net Status" must also
  1039.             be turned on (with the appropriate Net ID number) in order for this
  1040.             to work.
  1041.  
  1042.        R =  This will allow the user to download Receiver-Only messages.  This
  1043.             may come in handy if a user is a conference Moderator or if the
  1044.             user is echoing mail and the network allows Receiver-Only messages.
  1045.             One such NetWork that allows receiver-only messages is RIME.
  1046.  
  1047.  
  1048.         The third screen that can be displayed is the NetWork Name screen.  This
  1049. is pretty much the GENERIC screen that will pop up in several areas.  Depending
  1050. which area of the program you are in, it will do certain things.  To activate
  1051. this screen in the Users Editor Area, simply press the ALT-A keys
  1052. simultaneously.  BEFORE using this feature, be sure you have gone into the
  1053. NetWork Names and the NetWork Conferences (Individual or Range) from the Main
  1054. Menu and defined all of your NetWorks that you are carrying for each conference.
  1055. These other features are described further down in this manual.  The below menu
  1056. will then come up (These are just examples and will most likely not look like
  1057. the ones you have defined):
  1058.  
  1059. ╔═════════════════════════════════════════════════════════════════════════════╗
  1060. ║                        Cam-Mail v1.45 User Manager                          ║
  1061. ║                     Copyright (C) 1994 Cam DeBuck Software                  ║
  1062. ║                                                                             ║
  1063. ║   ╓────────────────────────────────────────────────────────────────────╖    ║
  1064. ║   ║                           Network Names                            ║    ║
  1065. ║   ║────────────────────────────────────────────────────────────────────║    ║
  1066. ║   ║  1) Local               2) U'NI-Net            3)                  ║    ║
  1067. ║   ║  4)                     5)                     6)                  ║    ║
  1068. ║   ║  7)                     8)                     9)                  ║    ║
  1069. ║   ║ 10)                    11)                    12)                  ║    ║
  1070. ║   ║ 13)                    14)                    15)                  ║    ║
  1071. ║   ║ 16)                    17)                    18)                  ║    ║
  1072. ║   ║ 19)                    20)                    21)                  ║    ║
  1073. ║   ║ 22)                    23)                    24)                  ║    ║
  1074. ║   ║ 25)                    26)                    27)                  ║    ║
  1075. ║   ║ 28)                    29)                    30)                  ║    ║
  1076. ║   ║ 31)                    32)                    33)                  ║    ║
  1077. ║   ║ 34)                    35)                    36)                  ║    ║
  1078. ║   ║ 37)                    38)                    39)                  ║    ║
  1079. ║   ║ 40)                    41)                    42)                  ║    ║
  1080. ║   ║ 43)                    44)                    45)                  ║    ║
  1081. ║   ║ 46)                    47)                    48)                  ║    ║
  1082. ║   ╙ Use arrow keys to move - Press Enter to Select - Press ESC to Exit ╜    ║
  1083. ╚═════════════════════════════════════════════════════════════════════════════╝
  1084.  
  1085.  
  1086.      You have two options at this point.  Either Press the ESC key to abort
  1087. this, or move the arrow keys and select the NetWork of your choice in which you
  1088. want to give the user certain privileges.  This feature will only work in
  1089. two aspects:
  1090.  
  1091.         1) The user has NetStatus and you want to give them NetStatus in all of
  1092.            the NetWork conferences that you defined (this depends on whether or
  1093.            not you have given NetStatus in the configuration area for the
  1094.            conferences).
  1095.  
  1096.         2) The user has never been in the Cam-Mail door and you wish to select
  1097.            conferences for them using the defaults that you have defined.
  1098.  
  1099. NetWork Names Configuration
  1100.  
  1101.      If you are carrying 1 or more NetWorks, it will be to you and your Users
  1102. benefit if you define your NetWorks that you are carrying.  From the Main Menu
  1103. and hit the B key.  This will bring up the NetWork Names menu.  You can at this
  1104. point Modify an existing NetWork Name or create a new one by moving to the next
  1105. BLANK conference Name and hitting the <Enter> key.  You should ALWAYS have at
  1106. least ONE NetWork name defined since everybody will always have LOCAL conferences
  1107. (The Main Board would be considered a Local conference in most cases).  The
  1108. following Menu will be displayed when you have selected a NetWork to Edit:
  1109.  
  1110. ╔═════════════════════════════════════════════════════════════════════════════╗
  1111. ║                                NetWork Name                                 ║
  1112. ║                             Default Information                             ║
  1113. ║ NetWork Name : U'NI-Net                                                     ║
  1114. ║ NetWork Abrv : UN                                                           ║
  1115. ║                                                                             ║
  1116. ║ Select Alias Status for New User : N                                        ║
  1117. ║                                                                             ║
  1118. ║ Select Conference for New User.. : N                                        ║
  1119. ║                                                                             ║
  1120. ║   If you answered Yes to the above question, you will need to specify       ║
  1121. ║   the type of SCAN FLAG when scanning for New Messages:                     ║
  1122. ║                                                                             ║
  1123. ║       (A = All Messages  B = ALL and YOUR Messages  Y = YOUR Messages ONLY) ║
  1124. ║                                                                             ║
  1125. ║ Scan Flag Type for New User..... : A                                        ║
  1126. ║                                                                             ║
  1127. ║   The next three questions will refer ONLY to those who have NET STATUS     ║
  1128. ║                                                                             ║
  1129. ║ Allowed to Echo NON-ECHO Msgs... : N                                        ║
  1130. ║ Allowed to Echo RCV-ONLY Msgs... : N                                        ║
  1131. ║ Allowed to have Net Status...... : N                                        ║
  1132. ║                                                                             ║
  1133. ║                                                                             ║
  1134. ╚═════════════════════════════════════════════════════════════════════════════╝
  1135.  
  1136.  
  1137.      The above menu are the DEFAULTS to use when defining Conferences by
  1138. RANGE or INDIVIDUALLY.
  1139.  
  1140.      If you wish to give a the default conference ALIAS status when defining
  1141. Conferences by RANGE or INDIVIDUALLY, set this option to YES.  In most cases
  1142. you will want to set this NO (Unless a specific NetWork allows ALIAS status
  1143. in all conferences).
  1144.  
  1145.      The next prompt is whether or not the conference(s) should be set for
  1146. New Users.  This will ONLY work if the user has never been in the door.  You
  1147. will then need to select the type of SCAN (The next prompt) that should be
  1148. set for the user.  In most cases this will be the A flag.
  1149.  
  1150.      The last three prompts will only work for users have NetStatus.  This is
  1151. where it gets a bit tricky.  Although we say it works for users who have
  1152. NetStatus, this function still works in conjunction with defining Conferences
  1153. by RANGE or INDIVIDUALLY.  Remember these are DEFAULT settings.  If you are
  1154. a HUB for a specify NetWork, you should at least set the Net Status prompt to
  1155. Yes.  The other two default prompts will vary according to the network that
  1156. you are in.  In most cases these will be set to NO.
  1157.  
  1158.  
  1159. Defining NetWork Conferences (Individually)
  1160.  
  1161.      Once you have define all of your NetWorks, you will want to define each
  1162. conference.  You can do this Individually or you can do it by a RANGE of
  1163. conferences (See Conferences (Range)).  You will find that defining conferences
  1164. by RANGE will be much easier when initially setting up the door.  However, when
  1165. you start expanding your conference selection to your users, you will find that
  1166. it might be easier defining conferences individually.  An example screen is
  1167. shown below:
  1168.  
  1169. ╔═════════════════════════════════════════════════════════════════════════════╗
  1170. ║                         Edit NetWork Conferences                            ║
  1171. ║                                                          Page     1 of     7║
  1172. ║(Flags) Select ONE of [A=All Mail  B=YOUR & ALL Mail  Y=YOUR Mail]           ║
  1173. ║(Flags) Select ANY of [L=Alias E=NonEcho N=Net Status R=Rcvr Only U=Newuser] ║
  1174. ║                                                                             ║
  1175. ║ Num   Conference     Flags  Net Work   Num   Conference     Flags  Net Work ║
  1176. ║───── ─────────────   ─────  ────────  ───── ─────────────   ─────  ──────── ║
  1177. ║    0 Main Board    :        Local        15 KMail         : AN     U'NI-Net ║
  1178. ║    1 Svalvards     :        Local        16               : AN     U'NI-Net ║
  1179. ║    2 PCB-Deposit   :        Local        17               : AN     U'NI-Net ║
  1180. ║    3 Excalibur     :        Local        18 Movies        : AN     U'NI-Net ║
  1181. ║    4 Camster       :        Local        19 ProComm       : AN     U'NI-Net ║
  1182. ║    5 Cam-Mail      :        Local        20 Courier       : AN     U'NI-Net ║
  1183. ║    6 Sysop         : AN     U'NI-Net     21 TeenClub      : AN     U'NI-Net ║
  1184. ║    7 EzReader      : AN     U'NI-Net     22               : AN     U'NI-Net ║
  1185. ║    8 MarkMail-Rnet : AN     U'NI-Net     23               : AN     U'NI-Net ║
  1186. ║    9               : AN     U'NI-Net     24               : AN     U'NI-Net ║
  1187. ║   10 TeleCommuting : AN     U'NI-Net     25 Media         : AN     U'NI-Net ║
  1188. ║   11 RoboComm      : AN     U'NI-Net     26 FastGraph     : AN     U'NI-Net ║
  1189. ║   12               : AN     U'NI-Net     27               : AN     U'NI-Net ║
  1190. ║   13               : AN     U'NI-Net     28               : AN     U'NI-Net ║
  1191. ║   14 PCBSysop      : AN     U'NI-Net     29 CamSoft       : AN     U'NI-Net ║
  1192. ║ ESC=Exit    PgDn=Forw    PgUp=Back    F2=Change NetWork Name & Flags        ║
  1193. ╚═════════════════════════════════════════════════════════════════════════════╝
  1194.  
  1195.      In order to use this feature, simply move the cursor to the conference
  1196. that you wish to Edit.  You can change flags or you can specify a different
  1197. NetWork by pressing the F2 key.  When pressing the F2 key the NetWork Names
  1198. Menu will come up.  Select the NetWork by using the arrow keys to select the
  1199. NetWork and then press the <Enter> key (Use the ESC Key to abort).  You will then
  1200. be brought back to the previous screen and the NetWork Name and flags will be
  1201. changed.
  1202.  
  1203. Defining NetWork Conferences (By Range)
  1204.  
  1205.      As you will notice, the screen defined below is almost exactly the same
  1206. as the one regarding Conferences Individually selected.  This is because there
  1207. needs to be a way to change the scan and registration flags for these conferences
  1208. (In case you don't want to use the Default settings that you setup previously for
  1209. this network).  Below is a sample screen:
  1210.  
  1211. ╔═════════════════════════════════════════════════════════════════════════════╗
  1212. ║                            Conferences Selection                            ║
  1213. ║                                 (By RANGE)                                  ║
  1214. ║ NetWork Name: Local                                                         ║
  1215. ║                                                                             ║
  1216. ║ Starting Conference Number :     0    Local                                 ║
  1217. ║ Ending Conference Number   :     0    Local                                 ║
  1218. ║                                                                             ║
  1219. ║ Select Alias Status for New User : N                                        ║
  1220. ║ Select Conference for New User.. : N                                        ║
  1221. ║ Scan Flag Type for New User..... : A  (A = All  B = ALL/YOUR  Y = YOUR)     ║
  1222. ║                                                                             ║
  1223. ║ The next three questions will refer ONLY to those who have NET STATUS       ║
  1224. ║                                                                             ║
  1225. ║ Allowed to Echo NON-ECHO Msgs... : N                                        ║
  1226. ║ Allowed to Echo RCV-ONLY Msgs... : N                                        ║
  1227. ║ Allowed to have Net Status...... : N                                        ║
  1228. ║                                                                             ║
  1229. ║ The type of RANGE that you can use will have different affects.  Add will   ║
  1230. ║ append any flags that you have set to YES.  Delete will remove any flags you║
  1231. ║ have set to YES.  New will start from scratch and turn on flags set to YES. ║
  1232. ║                                                                             ║
  1233. ║ Type of RANGE [Add, Delete, New] : N                                        ║
  1234. ║      Press the F2 Key to Change the NetWork Name,  Press PgDn to Begin      ║
  1235. ╚═════════════════════════════════════════════════════════════════════════════╝
  1236.  
  1237.  
  1238.      Defining NetWork Conferences by Range is fairly easy.  First, press the
  1239. F2 key to bring up the NetWork Names Menu.  Select the NetWork Name by using the
  1240. Arrow Keys and then press the <Enter> Key (Use the ESC key if you want to Abort
  1241. the process).  The NetWork Name will then change (Assuming you selected a
  1242. different NetWork Name).  The Default values will then be loaded in.  If you wish
  1243. to change any of these values, do so now.
  1244.  
  1245. Move the Cursor to the TYPE of RANGE.  You have three different options:
  1246.  
  1247.        1) Add    - This will append any existing flags for each conference that
  1248.                    have been Set to YES for each option.
  1249.  
  1250.        2) Delete - This will Delete any existing flags for each conference that
  1251.                    have been Set to YES for each option.
  1252.  
  1253.        3) New    - This will remove any existing flags in each conference and
  1254.                    will then add any options that have been set to Yes.
  1255.  
  1256. Once you have everything configuration properly, press the PgDown Key.
  1257. You will then have the option of continuing with the procedure or aborting.
  1258.  
  1259. ECHOING MAIL BETWEEN BBS's
  1260.  
  1261.       If you wish to echo messages between you and another BBS, this section
  1262. pertains to you.  There are 3 EXE files (NETSM.EXE, IMPORT.EXE, EXPORT.EXE) that
  1263. you will be working with for proper installation and processing messages to and
  1264. from the BBS's.  The setup/installation program is called NETSM.EXE.  This is
  1265. where you will define the conferences to echo and what type of echoing you will
  1266. be doing.  The other 2 files will deal with exporting and importing your
  1267. messages. Let's get started.
  1268.  
  1269. CAM-MAIL NET MANAGER
  1270.  
  1271.     Go into your Cam-Mail directory and run NETSM.EXE.  You will see the
  1272. following screen pop up:
  1273.  
  1274. ╔════════════════════════════════════════════════════════════════════════╗
  1275. ║                   Cam-Mail v1.45 Net Manager                           ║
  1276. ║              Copyright (C) 1994 Cam DeBuck Software                    ║
  1277. ║                                                                        ║
  1278. ║ ╓────────────────────────────────────────────────────────────────────╖ ║
  1279. ║ ║                        Cam-Mail Main Menu                          ║ ║
  1280. ║ ║────────────────────────────────────────────────────────────────────║ ║
  1281. ║ ║               A  File Locations                                    ║ ║
  1282. ║ ║               B  Archivers                                         ║ ║
  1283. ║ ║               C  NetWork Options                                   ║ ║
  1284. ║ ║               D  NetWork Definitions                               ║ ║
  1285. ║ ║               E  Conference Configuration                          ║ ║
  1286. ║ ║                                                                    ║ ║
  1287. ║ ╙ Use arrow keys to move - Press Enter to Select - Press ESC to Exit ╜ ║
  1288. ╚════════════════════════════════════════════════════════════════════════╝
  1289.   You will first need to go into (A) File Locations.  The following screen
  1290. will pop up:
  1291.  
  1292. ╔═════════════════════════════════════════════════════════════════════════════╗
  1293. ║                              File Locations                                 ║
  1294. ║                         Cam-Mail v1.45 Net Manager                          ║
  1295. ║                                                                             ║
  1296. ║ Work Directory... : C:\WORK\                                                ║
  1297. ║                                                                             ║
  1298. ╚═════════════════════════════════════════════════════════════════════════════╝
  1299.  
  1300.   Select a path that you want the export/import programs to use for a temporary
  1301. work directory to process the files.  These programs will only delete the files
  1302. they use.  Any other files in this directory will not be touched.
  1303.  
  1304.   ESC out of this area and go into (B) Archivers.  The following screen will
  1305. come up:
  1306.  
  1307. ╔═════════════════════════════════════════════════════════════════════════════╗
  1308. ║                                  Archive                                    ║
  1309. ║                         Cam-Mail v1.45 Net Manager                          ║
  1310. ║                                                                             ║
  1311. ║ Archiver Name.... : PKZip                                                   ║
  1312. ║ Arc Command...... : PKZip %1 %2                                             ║
  1313. ║ UnArch Command... : PKUNZip %1 %2 %3                                        ║
  1314. ║                                                                             ║
  1315. ║ Archiver Name.... :                                                         ║
  1316. ║ Arc Command...... :                                                         ║
  1317. ║ UnArch Command... :                                                         ║
  1318. ║                                                                             ║
  1319. ║ Archiver Name.... :                                                         ║
  1320. ║ Arc Command...... :                                                         ║
  1321. ║ UnArch Command... :                                                         ║
  1322. ║                                                                             ║
  1323. ║ Archiver Name.... :                                                         ║
  1324. ║ Arc Command...... :                                                         ║
  1325. ║ UnArch Command... :                                                         ║
  1326. ║                                                                             ║
  1327. ╚═════════════════════════════════════════════════════════════════════════════╝
  1328.  
  1329.   The PKZip info will not pop up, but use this as a guide to setting up PKZip.
  1330. Here is a description of the following % signs that are used:
  1331.  
  1332.   On the ARC command line:
  1333.  
  1334.      %1  - The PATH/NAME of the .QWK/.REP file to be Archived.
  1335.      %2  - The PATH/NAME of the file to be inserted into the Archive.
  1336.  
  1337.   On the UNARC command line:
  1338.  
  1339.      %1  - The PATH/NAME of the .QWK/.REP file to be Uncompressed.
  1340.      %2  - The NAME of the file to extracted.
  1341.      %3  - The PATH to the Work Directory (A trailing \ is included).
  1342.  
  1343.   The archivers are numbered 1 through 4.  This info will be needed later on.
  1344. If you wish to add any other Archivers at this point, please do so and then
  1345. continue on with the documentation.
  1346.  
  1347.   ESC out of here and go back to the main area.
  1348.  
  1349.   Next select (C) NetWork Options.  These are the DEFAULT options to use when
  1350. creating a NetWork Definition file for the conference information.  The
  1351. following screen will pop up:
  1352.  
  1353. ╔═════════════════════════════════════════════════════════════════════════════╗
  1354. ║                              Default Options                                ║
  1355. ║                         Cam-Mail v1.45 Net Manager                          ║
  1356. ║                                                                             ║
  1357. ║ Export Only if ECHO Message  : Y                                            ║
  1358. ║ Check for Duplicate Messages : Y                                            ║
  1359. ║                                                                             ║
  1360. ╚═════════════════════════════════════════════════════════════════════════════╝
  1361.  
  1362.   Export Only if ECHO message means to only export messages if they have an
  1363. 'ECHO' message status on it.  When leaving a message in an Echo Conference via
  1364. PCBoard, the user is asked if he/she wants to ECHO this message.  This is where
  1365. the Export Only if ECHO message comes in.
  1366.  
  1367.   Check for Duplicate Messages refers to Checking for duplicate messages when
  1368. importing a .QWK file.  Some people may not want to check for duplicate
  1369. messages in certain conferences so this was added. There is a command line
  1370. switch in the IMPORT.EXE (/DUPS) which forces all conferences to be checked
  1371. for duplicate messages (Just for your information at this point).
  1372.  
  1373.   IMPORTANT:  In order for Duplicate Checking to work you need to run the
  1374.              CRCSM.EXE program. See the CRCSM.DOC on how to operate.
  1375.  
  1376.   ESC out of here to get back to the Main Area.
  1377.  
  1378.   Next hit (D)  NetWork Definitions.  The following screen will pop up:
  1379.  
  1380. ╔═════════════════════════════════════════════════════════════════════════════╗
  1381. ║                         Cam-Mail v1.45 Net Manager                          ║
  1382. ║               Copyright (C) 1991-1994  Cam DeBuck Software                  ║
  1383. ║                                                                             ║
  1384. ║   ╓────────────────────────────────────────────────────────────────────╖    ║
  1385. ║   ║                        Network Definitions                         ║    ║
  1386. ║   ║────────────────────────────────────────────────────────────────────║    ║
  1387. ║   ║  1) SALTAIR             2)                     3)                  ║    ║
  1388. ║   ║  4)                     5)                     6)                  ║    ║
  1389. ║   ║  7)                     8)                     9)                  ║    ║
  1390. ║   ║ 10)                    11)                    12)                  ║    ║
  1391. ║   ║ 13)                    14)                    15)                  ║    ║
  1392. ║   ║ 16)                    17)                    18)                  ║    ║
  1393. ║   ║ 19)                    20)                    21)                  ║    ║
  1394. ║   ║ 22)                    23)                    24)                  ║    ║
  1395. ║   ║ 25)                    26)                    27)                  ║    ║
  1396. ║   ║ 28)                    29)                    30)                  ║    ║
  1397. ║   ║ 31)                    32)                    33)                  ║    ║
  1398. ║   ║ 34)                    35)                    36)                  ║    ║
  1399. ║   ║ 37)                    38)                    39)                  ║    ║
  1400. ║   ║ 40)                    41)                    42)                  ║    ║
  1401. ║   ║ 43)                    44)                    45)                  ║    ║
  1402. ║   ║ 46)                    47)                    48)                  ║    ║
  1403. ║   ╙ Use arrow keys to move - Press Enter to Select - Press ESC to Exit ╜    ║
  1404. ╚═════════════════════════════════════════════════════════════════════════════╝
  1405.  
  1406.   Note that SLEEPY will not come up.  This is just my configuration that I use
  1407. on my BBS and for an example for you.
  1408.  
  1409.   You can have a total of 48 different NetWork Definitions.  If you need more
  1410. than 48 NetWork definitions please let me know. (But I doubt anybody will at
  1411. this point in time as I don't even know of 48 networks that exist).
  1412.  
  1413.   The NetWork definition will be an 8 character filename.  All Mail doors have
  1414. a NetWork ID that can be up to 8 characters in length.  Contact your HUB for
  1415. the NetWork Definition that he/she uses.
  1416.  
  1417.   If you know your HUB's NetWork Definition hit the ENTER key.  The following
  1418. menu will pop up, otherwise discontinue use of this program as it will not
  1419. benefit you until you are echoing mail through another BBS.
  1420.  
  1421. ╔═════════════════════════════════════════════════════════════════════════════╗
  1422. ║                               NetWork Info                                  ║
  1423. ║                         Cam-Mail v1.45 Net Manager                          ║
  1424. ║ Net ID (Hubs QWK/REP Name: SALTAIR    Archiver....... : 1                   ║
  1425. ║ Your Sysop Name.. : CAM DEBUCK                                              ║
  1426. ║ Hubs Sysop Name.. : DAVID TERRY                                             ║
  1427. ║ Your Tag Line #1  : U'NI-net ■ CamSoft Inc. ■ Springville UT ■ 801-489-3558 ║
  1428. ║ Hubs Tag Line #1  : U'NI-net ■ Clark Development Company ■ Murray, UT       ║
  1429. ║ Your Tag Line #2  :                                                         ║
  1430. ║ Hubs Tag Line #2  :                                                         ║
  1431. ║ Your Tag Line #3  :                                                         ║
  1432. ║ Hubs Tag Line #3  :                                                         ║
  1433. ║ Your Tag Line #4  :                                                         ║
  1434. ║ Hubs Tag Line #4  :                                                         ║
  1435. ║ Your Tag Line #5  :                                                         ║
  1436. ║ Hubs Tag Line #5  :                                                         ║
  1437. ║ Your Tag Line #6  :                                                         ║
  1438. ║ Hubs Tag Line #6  :                                                         ║
  1439. ║ Your Tag Line #7  :                                                         ║
  1440. ║ Hubs Tag Line #7  :                                                         ║
  1441. ║ Your Tag Line #8  :                                                         ║
  1442. ║ Hubs Tag Line #8  :                                                         ║
  1443. ║ Your Tag Line #9  :                                                         ║
  1444. ║ Hubs Tag Line #9  :                                                         ║
  1445. ╚═════════════════════════════════════════════════════════════════════════════╝
  1446.  
  1447.   1 - Enter in the Name of the NetWork Definition.
  1448.   2 - Select the Archiver to use (A Number 1 - 4).
  1449.   3 - Enter your Sysop Name to use when exporting messages.  Any message that
  1450.       has SYSOP in the to/from field will be translated to this name.
  1451.   4 - Enter your Hub's Sysop Name to use when importing messages.  Any message
  1452.       that has SYSOP in the to/from field will be translated to this name.
  1453.   5 - Enter in your Tag Line to use when exporting messages.  Most NetWorks
  1454.       have some kind of a standard to use.  For example, the U'NI-net needs
  1455.       to look like this:  U'NI-net ■ BBS Name ■ City
  1456.   6 - Enter in your Hub's Tag Line to use when importing messages. Most
  1457.       NetWorks have some kind of a standard to use.  For example, the
  1458.       U'NI-net needs to look like this:  U'NI-net ■ BBS Name ■ City
  1459.   7 - OPTIONAL INFORMATION:  If your HUB that you are calling has several
  1460.       different NetWorks to choose from and you are carrying more than one
  1461.       NetWork you will need to specify the other TagLines.  You are allowed
  1462.       to specify a different TagLine for each conference that you are echoing.
  1463.       A maximum of 9 taglines are available at this point.  If you echo more
  1464.       than 9 networks from the same HUB, please contact me and I'll modify the
  1465.       code to have more NetWork TagLines.
  1466.  
  1467.   Hit ESC TWICE to get back to the Main Area.
  1468.  
  1469.   Hit (E) Conference Configuration.  The following menu will pop up:
  1470.  
  1471.   NOTE:  Conference Configuration will ONLY WORK if you have selected a
  1472.          NetWork definition.  You do this by going into D NetWork Def.
  1473.          and hitting the ENTER key on the NetWork that you want to modify.
  1474.  
  1475. ╔═════════════════════════════════════════════════════════════════════════════╗
  1476. ║                         Cam-Mail v1.45 Net Manager                          ║
  1477. ║               Copyright (C) 1991-1994  Cam DeBuck Software                  ║
  1478. ║                                                                             ║
  1479. ║   ╓────────────────────────────────────────────────────────────────────╖    ║
  1480. ║   ║                     Conference Configurations                      ║    ║
  1481. ║   ║────────────────────────────────────────────────────────────────────║    ║
  1482. ║   ║    0) Main Board          1) Svalvards           2) PCB-Deposit    ║    ║
  1483. ║   ║    3)                     4)                     5) Cam-Mail       ║    ║
  1484. ║   ║    6) Sysop               7) EzReader            8) MarkMail-Rnet  ║    ║
  1485. ║   ║    9)                    10) TeleCommuting      11) RoboComm       ║    ║
  1486. ║   ║   12)                    13)                    14) PCBSysop       ║    ║
  1487. ║   ║   15) KMail              16)                    17)                ║    ║
  1488. ║   ║   18) Movies             19) ProComm            20) Courier        ║    ║
  1489. ║   ║   21) TeenClub           22)                    23)                ║    ║
  1490. ║   ║   24)                    25) Media              26) FastGraph      ║    ║
  1491. ║   ║   27)                    28)                    29) CamSoft        ║    ║
  1492. ║   ║   30)                    31)                    32) UNI-HUB        ║    ║
  1493. ║   ║   33)                    34)                    35)                ║    ║
  1494. ║   ║   36) UNINET             37) NetNews            38) SH-ADMIN       ║    ║
  1495. ║   ║   39)                    40) Tech               41) DosTips        ║    ║
  1496. ║   ║   42) HardWare           43) ShareWare          44) Consulting     ║    ║
  1497. ║   ║   45) Assembly           46) Basic              47) C-Language     ║    ║
  1498. ║   ╙ Use arrow keys to move - Press Enter to Select - Press ESC to Exit ╜    ║
  1499. ╚═════════════════════════════════════════════════════════════════════════════╝
  1500.   Note that the following conferences will not pop up, but rather your
  1501.   conferences.
  1502.  
  1503.   Next Select a conference that you want to ECHO.  Hit RETURN and the following
  1504.   screen will pop up:
  1505.  
  1506. ╔═════════════════════════════════════════════════════════════════════════════╗
  1507. ║                     Edit SALTAIR NetWork Conferences                        ║
  1508. ║ Conference Name :  Main Board    (0)                                        ║
  1509. ║                                                                             ║
  1510. ║ Host Conf #     :     0    Conf Name : N/A                                  ║
  1511. ║ Export/Import   : N                                                         ║
  1512. ║ Your Tag Line # : 1                                                         ║
  1513. ║ Hubs Tag Line # : 1                                                         ║
  1514. ║                                                                             ║
  1515. ║ Echo Msgs Only     : Y                                                      ║
  1516. ║ Echo Privvate Msgs : N                                                      ║
  1517. ║ Duplicates         : Y                                                      ║
  1518. ║ Msg Pointer        : 9999999 Low :       1  High :     612                  ║
  1519. ║                                                                             ║
  1520. ║ ESC=Exit    PgDn=Forw    PgUp=Back    Ctrl-PgDn=Forw20    Ctrl-PgUp=Back20  ║
  1521. ╚═════════════════════════════════════════════════════════════════════════════╝   First you will need to know the number of your HUB's conference that matches
  1522. this conference.  Under Host Conf # enter in this number.  Answer Yes to
  1523. the Export/Import prompt.  Select the appropriate Tag Line NUMBER (1-9).
  1524.  
  1525.   NOTE:  Unless you have the Export/Import set to Yes, the conference will not
  1526.          be imported/exported during the process of the .REP/.QWK files.
  1527.  
  1528.   The last four fields are up to you.  The first three are options, the last
  1529. field is the pointer that keeps track of where mail should be exported from in
  1530. each conference.
  1531.  
  1532. Echo Msgs Only refers to echo messages to your HUB that only have an ECHO STATUS
  1533. in the MSGS file.
  1534.  
  1535.   Duplicates refers to check for duplicates when importing messages.  If you
  1536. wish to check for duplicate in ALL conferences that are imported you can
  1537. use the command line switch /DUPS (works with only IMPORT.EXE).  This will be
  1538. discussed later in the documentation with the IMPORT.EXE program.
  1539.  
  1540.   Echo Private Messages will echo any messages that have a status of PRIVATE.
  1541. This means that they are RECEIVER-ONLY messages in PCBoard and are addressed to
  1542. a specific person.  Most QWK type networks do NOT support Private Mail.  This
  1543. options should normally be set to NO.
  1544.  
  1545.   Msg Pointer is the last read message pointer for the EXPORT.EXE program.
  1546. Once you run the EXPORT.EXE, all messages will be reset to the Highest
  1547. Message Pointer.  The High/Low conference numbers are shown on the screen
  1548. for your convenience.  You can modify the Msg Pointer if you need to for some
  1549. reason.
  1550.  
  1551.   Repeat the following steps for any other conferences that you will be
  1552. setting up.  A very simple procedure.
  1553.  
  1554.   NOTE:  When creating the conference information, All Last Message Pointers
  1555.          are set to 9999999.  This is a SAFE number to use so no messages
  1556.          are exported on your first run.  The Msg Pointers will then be
  1557.          set to the Highest Message number in each conference.
  1558.  
  1559.   After you have edited all of your conference information, select/create
  1560. another network definition if you are echoing through more than one BBS.  Then
  1561. just edit the new conference information until you are finished with all
  1562. networks.
  1563.  
  1564.   That's it for the NETSM.EXE program.
  1565.  
  1566. CAM-MAIL EXPORT.EXE
  1567.  
  1568.   The EXPORT.EXE program can only be passed one parameter.  This is the
  1569. network definition name (8 letters max).  This will be the EXACT name that
  1570. you used in the D  NetWork Definitions via NETSM.EXE.
  1571.  
  1572.   First, make sure that your WORK directory that you specified in NETSM.EXE
  1573. exists.  If it doesn't, create this directory.  Otherwise the program will
  1574. not work.
  1575.  
  1576.   At the DOS command line type:
  1577.  
  1578.    EXPORT NetDefinition Options
  1579.  
  1580.   The program will then process any new messages that need to be exported.
  1581. EXPORT.EXE will create your .REP file in your .REP directory that you
  1582. specified in the CMSetUp.EXE program (E  Misc Paths).
  1583.  
  1584.   If a previous .REP file exists, EXPORT will unzip this file and append
  1585. any new messages to this file.
  1586.  
  1587.   OPTIONS
  1588.  
  1589.       /LOG - This will let you know what was processed during Export. The name
  1590.              of the LOG file will be the name of your Net ID plus .LOG.  This is
  1591.              the ONLY option that you should be using when you are officially
  1592.              exporting mail.
  1593.  
  1594.       /TOP - This will TOP the All of your conferences for the High Message
  1595.              Number.  Only use this when you are first intialization a particular
  1596.              network.  Meaning, after you have everything setup properly use this
  1597.              option.
  1598.       /BUILDREP - This allows the building of a REP file that only contains the
  1599.              conferences you want to be echoing from your HUB.  This will not
  1600.              affect your Last Message Read pointers inside the door or in Export.
  1601.              Be aware that this will NOT EXPORT any new messages, but merely
  1602.              create a REP packet that contains a bunch of messages that say ADD
  1603.              this conference for scanning.  See below for an example of what
  1604.              happens.
  1605.  
  1606.       /MAILDOOR:name - This works in conjunction with the /BUILDREP switch.  The
  1607.              :name represents the name of the Mail Door your HUB SYSOP is using.
  1608.              The Default setting is CAM-MAIL.  Here's what happens when you use
  1609.              the /BUILDREP and /MAILDOOR:QMAIL settings.  One Message for each
  1610.              conference you're echoing is created like this:
  1611.  
  1612.                    TO: QMAIL
  1613.                  FROM: CAM-MAIL
  1614.                  SUBJ: ADD
  1615.  
  1616.              Basically, all you're doing is configuring your hubs door OFFLINE. CAM-MAIL IMPORT.EXE
  1617.  
  1618.   When you have downloaded a .QWK file from your HUB and the .QWK file is in
  1619. your .QWK directory (Which you specified in the CMSM.EXE program) you will
  1620. want to run IMPORT.EXE to import the messages into the correct conferences.
  1621. IMPORT will automatically create a file called DUPS.LOG.  This file contains the
  1622. percentage of duplicate messages that were found.  IMPORT create a file called
  1623. CRC.DAT.  If IMPORT starts hanging this indicates that the CRC.DAT file is
  1624. corrupted.  DELETE IT IMMEDIATELY.
  1625.  
  1626.   The IMPORT.EXE has one parameter passed to it along with 2 optional
  1627. parameters:
  1628.  
  1629.   IMPORT NetDef Options
  1630.  
  1631.       /SYSOP      -  Any mail that is address to your REAL name will be converted
  1632.                      to SYSOP.
  1633.       /DUPS       -  Force duplicate checking in ALL conferences.
  1634.       /MAILFLAGS  -  Turn on Mail Waiting Flags when importing messages.
  1635.                      If you use the /FLAGMAIL option, you will no longer
  1636.                      need to use PCBNET.EXE.  Free up save HD space <grin>.
  1637.       /KILLQWK    -  Will Kill your .QWK file after importing.
  1638.       /LOG        -  This lets you know what was processed during Import. The
  1639.                      name of the LOG file will be the name of your Net
  1640.                      Definition plus .LOG.
  1641.  
  1642.  
  1643.   Once you figure out which options you want to use (I suggest all of them)
  1644. use the IMPORT program as defined above.
  1645.  
  1646.   That's it.  Very simple and easy to use.  Once you have it all configured
  1647. add the EXPORT/IMPORT programs to your EVENT.SYS file and let everything
  1648. be automated.
  1649.  
  1650.                           PRESCANNING MAIL PACKETS
  1651.  
  1652. CAM-MAIL PRESCAN.EXE
  1653.  
  1654.    What exactly is the PRESCAN.EXE file?  This file will enable you to
  1655. create .QWK packets for users during your Event.  This is very useful if
  1656. you are a HUB for a particular Echo NetWork (U'NI-net, ILink, Intelec, etc.)
  1657. as you can PreScan Packets for all of your NODES that call you, which will save
  1658. them on-line time and reduce their phone bill.
  1659.  
  1660.       The number one purpose of prescanning packets, as far as I can see, is to
  1661.       save money for long distance callers and to free up on-line time.
  1662.  
  1663.    How do I enable the PRESCAN.EXE?  First, you need to go into the USERSM.EXE
  1664. program.  Select A (Edit Users Flags).  Use the ALT-F command to find a user
  1665. which you wish to prescan packets.  Move the cursor to OffLine Packets and put
  1666. a 'Y' in there.  Move down to the next line (Packet Name) and select a unique
  1667. packet name.  I suggest the first 8 letters of the Users Last Name.  Each user
  1668. needs to have a different packet name.  Repeat these steps for each user you want
  1669. to prescan packets for.
  1670.  
  1671.    The next step is to go into your PCB directory where you will be running the
  1672. PRESCAN.EXE file.  Once in this PCB directory, copy from your CAM-MAIL
  1673. directory these files: CAMZIPx.BAT and CAMUZIPx.BAT files.  If you are like me
  1674. you will only have the CAMZIPZ.BAT and CAMUZIPZ.BAT files.
  1675.  
  1676.    You're probably wondering why you just can't run the PRESCAN.EXE from your
  1677. CAM-MAIL directory.  The problem is that when PRESCAN calls the PCB145.EXE file,
  1678. PCBoard expects to find your PCBOARD.DAT and your PCBPROT.DAT files.  That is
  1679. why the program runs in the PCB directory.
  1680.  
  1681.    The last and final step is to modify your EVENT.SYS file and add these lines
  1682. to it:
  1683.  
  1684.     CD \PCB
  1685.     \CAM-MAIL\PRESCAN.EXE \CAM-MAIL
  1686.  
  1687. Notice that the \CAM-MAIL command line parameter is the path to my
  1688. CAM-MAIL directory (Where CAM-MAIL.EXE, CAM-MAIL.KEY, and CAMMAIL.CFG is
  1689. located).
  1690.  
  1691. One important note:  Make sure that your OFFLINE directory exists, otherwise
  1692. no .QWK packets will be created. (This is defined in CMSetUp.EXE.)
  1693.  
  1694.   PRESCAN.EXE creates a log file called PRESCAN.LOG in the current directory.
  1695. PRESCAN will create a new file if it doesn't exist, otherwise, it will append
  1696. any information to it.
  1697.  
  1698. CAM-MAIL LOCALCAM
  1699.  
  1700.     The purpose of Localcam is to create a QWK packet or insert a REP file as
  1701.     easily as possible during your event.
  1702.  
  1703.   Command Line Parameters:
  1704.  
  1705.     There are a total of 7 command line parameters that can be passed to the
  1706.     program.  You MUST use 6 of the 7.  Here's a list and a description:
  1707.  
  1708.     Required commands
  1709.  
  1710.       PCB:xxx    - This is the DRIVE/PATH to your PCBoard Directory that you
  1711.                    wish to use.  You MUST include the DRIVE letter.
  1712.       FNAME:xxx  - This is the First Name of the user.
  1713.       LNAME:xxx  - This is the Last Name of the user.
  1714.       PWRD:xxx   - This is the Password of the user.
  1715.  
  1716.     Optional commands (One of the two must be used or both)
  1717.  
  1718.       REP        - Tells the program that you want to get a QWK file.
  1719.       QWK        - Tells the program that you want to insert a REP file.
  1720.       DOOR:xxx   - Tells the program to override the default door name.
  1721.                    The default is MAIL (Which is the KEY name via PCBSM).
  1722.                    If you installed the door with a different name, then you
  1723.                    will need to use this command so PCBoard will create the
  1724.                    USERS.SYS file.
  1725.  
  1726.  How is works:
  1727.  
  1728.     The program will create your QWK packet in the directory defined in the
  1729.     CMSetUp.EXE program ((E)  Misc Paths  Path to QWK files).  The door will look
  1730.     for your REP file defined in the CMSetUp.EXE ((E)  Misc Paths  Path to REP).
  1731.  
  1732.  How to Use:
  1733.  
  1734.     Be sure you run the LOCALCAM.EXE in your CAM-MAIL directory.  The program
  1735.     will automatically change to your PCB directory in order to create the
  1736.     USERS.SYS and PCBOARD.SYS.  Please note that the program requires that you
  1737.     have a PCB145.EXE (Somewhere in a Path or in the PCB directory), and that
  1738.     the name of the door is called MAIL (This is the command that is used to
  1739.     open the door via PCBoard itself).  If you are unsure of how you installed
  1740.     the Cam-Mail Door, go into PCBSM ((D)  Users Info File Maintenance).  Then
  1741.     Select ((B)  List Installed Third Party Application).  It then should have
  1742.     something like:
  1743.  
  1744.       TPA:  CAM-MAIL   Ver: 1   Static: 60   Dynamic: 1   Key: MAIL
  1745.             ^^^^^^^^                                            ^^^^
  1746.  
  1747.     The KEY should be MAIL and the TPA should be CAM-MAIL.
  1748.  
  1749.     Here are a couple of examples that you can use:
  1750.  
  1751.       LOCALCAM.EXE PCB:D:\PCB FName:CAM LName:DeBuck Pwrd:Unknown QWK
  1752.  
  1753.         The above example will run the Cam-Mail Door and will create a QWK
  1754.         packet if any new messages are found.  The QWK packet will be created
  1755.         in the directory defined in the CMSM program.
  1756.  
  1757.       LOCALCAM.EXE PCB:D:\PCB FName:CAM LName:DeBuck Pwrd:Unknown REP
  1758.  
  1759.         The above example will run the Cam-Mail Door and will insert your REP
  1760.         packet if it can be found in your REP directory.  Your REP file will
  1761.         automatically be deleted once inserted.
  1762.  
  1763.       LOCALCAM.EXE PCB:D:\PCB FName:CAM LName:DeBuck Pwrd:Unknown QWK REP
  1764.  
  1765.         The above example will run the Cam-Mail Door and will insert your REP
  1766.         packet if it can be found in your REP directory.  Your REP file will
  1767.         automatically be deleted once inserted.  It will also create a QWK
  1768.         packet if any new messages are found.  The QWK packet will be created
  1769.         in the directory defined in the CMSM program.  Please note that the
  1770.         REP file is processed first, and then the QWK packet.
  1771.  
  1772. CAM TEXT PROMPT EDITOR
  1773.  
  1774.      The MKCAMTXT.EXE program allows you to modify all of the prompts that are
  1775. used in the CAM-MAIL.EXE program.  This allows for Multi-Lingual operation.  If
  1776. you need to have multi-lingual prompts, simple create a file called CAMTEXT.XXX
  1777. (Where XXX is the langauge extension defined in PCBSet for the language),
  1778. otherwise simply edit the CAMTEXT file for normal operations.  An example of the
  1779. program is shown below:
  1780.  
  1781.  
  1782. ╒═════════════════════════════════════════════════════════════════════════════╕
  1783. │                        CAMTEXT File Generator/Editor                        │
  1784. ╘═════════════════════════════════════════════════════════════════════════════╛
  1785. ╒════════════════════════════════════════════════════════╕
  1786. │Enter filename to edit/create: CAMTEXT                  │
  1787. ╘════════════════════════════════════════════════════════╛
  1788. ╒═════════════════════════════════════════════════════════════════════════════╕
  1789. │   Record No.:  71           Record Length:  79                              │
  1790. ├─────────────────────────────────────────────────────────────────────────────┤
  1791. │A) All Mail in   Y) Only Mail addressed   B) Your personal and               │
  1792. │@X09A) All Mail in   @X0DY) Only Mail addressed   @X0AB) Your personal and   │
  1793. │@X09A) All Mail in   @X0DY) Only Mail addressed   @X0AB) Your personal and   │
  1794. ╘═════════════════════════════════════════════════════════════════════════════╛
  1795. ┌─────────────────────────────────────────────────────────────────────────────┐
  1796. │     <ESC>       = Save & Quit.          <F2>        = Text-Search.          │
  1797. │     <F3>        = New Record Number.    <F4>        = Restore Default.      │
  1798. │     <Up>        = Back 1 record.        <Dn>        = Ahead 1 record.       │
  1799. │     <PgUp>      = Back 10 records.      <PgDn>      = Ahead 10 records.     │
  1800. │     <Ctrl-PgUp> = Begin. of file.       <Ctrl-PgDn> = End of File.          │
  1801. │     <F5>        = Update Ansi Window                                        │
  1802. └─────────────────────────────────────────────────────────────────────────────┘
  1803. ╒═════════════════════════════════════════════════════════════════════════════╕
  1804. │                      (C) Copyright Cam DeBuck Software 1991, 1992           │
  1805. ╘═════════════════════════════════════════════════════════════════════════════╛
  1806.  
  1807.  
  1808.  
  1809. ACKNOWLEDGEMENTS
  1810.  
  1811. First, let me thank those persons who are responsible for the .QWK
  1812. format (although, the information on the format is scarce):
  1813.  
  1814.   Mark Herring - The original author of the QMail Door for PCBoard.
  1815.   Clark Development Company, Inc. - Author of PCBoard Bulletin Board.
  1816.  
  1817.      If you would like to register this door, please check the next page for
  1818. information on how to register.  Fill out the form and mail it back to me.
  1819.  
  1820. The door has not been crippled in any way other than the fact that your IDCODE
  1821. is DEMO.QWK and DEMO.REP until you register.  Other than that, the door has not
  1822. been crippled.  It will work on non-standard comports in the ShareWare version
  1823. as well.
  1824.  
  1825. Please, I ask you to support the ShareWare concept if you continue to use the
  1826. door more than 30 days to evaluate the door.  If you do not register the door
  1827. within 30 days, please take it down and discontinue its use.  Many HOURS and
  1828. MONTHS have gone into making this the BEST ShareWare Mail Door available.
  1829. Registration is only $30.00 compared to the $50.00 commercial ones.  You will
  1830. find that his door is a COMPLETE packet with NetWork support and has everything
  1831. one needs to echo messages between BBSs.
  1832.  
  1833. If you run into any problems with the door, please let me know.  You can reach
  1834. me via my BBS at (801)489-8905 [v.32bis] or (801) 489-3558 [HST DS 16.8K].
  1835.  
  1836.  
  1837.      A big Thank You goes to those people who helped Beta Test All versions of
  1838. the software.  Without you, Cam-Mail v1.45 would of never of gotten this far.
  1839.  
  1840. Special Thanks go to the following people for registering the Door before
  1841. its release:
  1842.  
  1843. Chuck Seyboldt               Mike Labbe            Wade Edwards
  1844. Gordon Huyck                 Ron Brandt            Ernie Johnson
  1845. Russell Jackson              Chet Wilkinson        Eric Lundberg
  1846. Ken Hedgecock                Terry Raley           Reginald A. Hirsch
  1847. Ira Kemp                     John Stewart          Roger Sligar
  1848. Bruce Haefemeyer             Michael Sussell       John W. Zerkel
  1849. Rick Cann                    Jon Orten             Hans Gether
  1850. Jack Daugherty               Bob Allen             Rich Little
  1851. Jonathan Hart                Ada Kirkman           Lance Williams
  1852. Gary Groeller                Frank M. Lerner       Jim Wall
  1853. Dan Smith                    John Huner            Jeff Grant
  1854. Mark Pruitt                  Gary Smith            David Keener
  1855. Peter Booras                 Len Hult              Gary Meeker
  1856.                              Ted De La Mare
  1857.  
  1858. And one other Special Thanks to those who have supported Cam-Mail and the
  1859. ShareWare concept:
  1860.  
  1861. WordPerfect Corporation      Matej Kersevan        Peter Booras
  1862. Chris Long                   Bob Chapman           Gary Smith
  1863. Gary Phelps                  David Tisinai         Jeff Grant
  1864. Bob Simpson                  Mike Reid             Mark Pruitt
  1865. Michael Griffin              Bill Wahlstrom        Dan Smith
  1866. Harry R. Bragdon             Gene Newcomb          John Huner
  1867. Fifth Generation             Steven H. Lin         Jim Wall
  1868. Systems                      Steve Prater          Frank M. Lerner
  1869. James Lewis                  James Wall            Gary Groeller
  1870. Charles Sea                  Eugene R. Hysner      Lance Williams
  1871. Phil Gottfredson             Michael Walter        Ada Kirkman
  1872. David R. Sader               Spencer Greenwald     Johnathan Hart
  1873. Bobby Guilbeau               Don Paul Jones        Rich Little
  1874. Carlos Honorato              Guy Kowalski          Bob Allen
  1875. David Muench                 Peter Wadsworth       Jack Daugherty
  1876. Phil Geiger                  David Todd            Hans Gether
  1877. Bob Neal                     Sean & Stanley Truman Jon Orten
  1878. Tim Sawyer                   Uwe J. Jildesheim     Rick Cann
  1879. Rod L. Renner                Gardiner Jones        John W. Zerkel
  1880. Hal Wald                     Steven Cain           Michael Sussell
  1881. Gerry Schechter              Kevin Raihala         Bruce Haefemeyer
  1882. Dave Dennett                 Howard Belasco        Roger Sligar
  1883. Dave Pletsch                 Paul Gamber           Ira Kemp
  1884. Dwight Dawson                David Whipp           John Stewart
  1885. Daryl Stogner                Don Grillo            Terry Raley
  1886. Barly Redsar                 Walt Benson           Reginald A. Hirsch
  1887. Duffy Groener                Michael Scribner      Ken Hedgecock
  1888. Eric Horn                    Dave Klein            Eric Lundberg
  1889. Clifford B. Deans            Roger Messer          Chet Wilkinson
  1890. Jim Stein                    Dusan Golubic         Russell Jackson
  1891. Mike Perkins                 Greg Duvall           Ernie Johnson
  1892. TDF Telecom                  Ray Herold            Ron Brandt
  1893. Fred Korevec                 Cindy Duryea          Gordon Huyck
  1894. Jim Dirkes                   Irve Towers           Wade Edwards
  1895. Ken Wilson                   Paul Gonya            Mike Labbe
  1896. Tim Meade                    Francis Selje         Chuck Seyboldt
  1897. Michael Dodge                Adam Shiffman         Russell Townsend
  1898. John Hodal                   John Dodson           Please note that there are
  1899. Allen Stone                  Alvin Combs           other people who names are
  1900. Steve Williams               Wichita State         not listed that have helped
  1901. Pete Schenk                  University            make Cam-Mail the best mail
  1902. Norm Henke                   Mike Weixler          door for PCBoard.
  1903. Lee Harden                   Bill Pankenier
  1904. Marty Shannon                Hung X. Le
  1905. Doug Moore                   Jim Tamburrino
  1906. Brian J. Marx                Jim Sanders
  1907. Rick Morris                  Dave Parks
  1908. Danny Walker                 Dennis Moon
  1909. Charles R. Lekowski          Mario Diaz
  1910. James Sharrer                Owen Hawkins
  1911. Bob Gage                     Joe Pagnossin
  1912. Tom Carroll                  Tony McClenny
  1913. Ricky Schradin               George Silberstern
  1914. Russell Hardenburgh          Charles Shapiro
  1915. Edward Owen                  Gary Bouchard
  1916. Mike Olah                    William L.
  1917. Bob Charles                  Schoenbachler
  1918. Information                  George Clifford
  1919. Management/EOUSA             Don Mackai
  1920. Glenise Gleaton              Darryl Kwasny
  1921. Ray Collado                  Joe Berardelli
  1922. Robert Seely                 Darin Ramey
  1923. Ken Schatzle                 Ted de la Mare
  1924. Yan Wolf                     Larry Stevenson
  1925. Steve Clifford               David Keener
  1926. Ray Clemmer                  Len Hult
  1927.                              Gary Meeker
  1928.  
  1929. TECNICAL HELP
  1930.  
  1931.   VOICE Business Hours:
  1932.  
  1933.      Saturday-Monday - CLOSED
  1934.      Tuesday-Friday  - 1pm to 6pm
  1935.  
  1936.      If you need technical assistance or would like to purchase a copy of
  1937.      Cam-Mail, please give us a voice call at:
  1938.  
  1939.         (801) 489-4878 [Tuesday-Friday 1pm-6pm]
  1940.  
  1941.      We accept Visa, MasterCard, Diners Club, and JCB Cards.
  1942.  
  1943.      You can also call our BBS 24 hours a day at:
  1944.  
  1945.        (801)489-8905 [HST DS 16.8K]  Node 1
  1946.        (801)489-3558 [HST DS 16.8K]  Node 2
  1947.  
  1948. OTHER SOFTWARE
  1949.  
  1950.      We also have several other programs that you might be interested in.  The
  1951. lastest versions can always be downloaded from our BBS in file directory #1:
  1952.  
  1953.       Cam-Mail    A QWK/REP Door for PCBoard 14.5 or PCBoard 15.x
  1954.       PCB-Deposit A time/byte deposit door for PCBoard.
  1955.       Svalvards   A Dungeons & Dragons Door.  Awesome!
  1956.       Cams-CRC    An Upload processor for ZIP/GIF files.  FAST!!
  1957.       PCB-Net     Updates Mail Waiting Flags for people echoing mail.
  1958.       TaskForce   A space adventure trading game.  MultiNode!
  1959.       DCCD        The Deluxe Credit Card Door for Subscription/Products.
  1960.       Camster     The best offline mail reader.
  1961.