home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
BBS
/
LOD421B.ZIP
/
GAME.CTL
< prev
next >
Wrap
Text File
|
1995-04-26
|
6KB
|
146 lines
;Door Control file
;-----------------
;
;Sysopfirst: Specifies the first name of the sysop as it will be shown to
; the users.
;
;SysopLast: Specifies the last name of the sysop as it will be shown to
; the users.
;
;BBSName: Specifies the name of the bbs as it will be shown to users.
;
;Mono: Will disable color on the local side. (Necessary if you are
; running a monochrome system)
;
;BBSType: Specifies the type of bbs software under which this door program
; will be run. Valid bbs types include:
;
; LOCAL - Always log on as local user
; SYSOP - Always log on as sysop
; RBBS - Rbbs-Pc version 16.1+ (uses DORINFOx.DEF)
; QUICK - Quickbbs; Uses DORINFOx.DEF (same as above)
; PCB12 - Pcboard version 12 (note: see COMPORT note below)
; PCB14 - Pcboard version 14
; WWIV - WWIV bbs (uses chain.txt)
; PHOENIX - Phoenix bbs
; WILDCAT - Wildcat bbs (only versions before WC 3.0!!)
; DOORSYS - Any bbs using door.sys (WC 3.0, Gap, etc)
; SPITFIRE - Spitfire bbs system (SFDOORS.DAT)
; 2AM - 2AM-bbs (jumper.dat)
;
;ComPort: For bbs types that do not have the com-port contained in their
; door information files (such as PCBOARD-12), you will have to
; specify the com-port. Simply put the port number (i.e. 1,2,etc)
; not the whole word COM1.
;
;LockBaud: This will specify a locked baud rate. If you specify this
; parameter, then no matter what the bbs software says, this
; baud rate will be used. [NOTE: You can also specify the locked
; baud rate using /Bxxxx from the command line]
;
;Internal: Selecting this option will cause doordriver to use it's internal
; buffered comm routines. If you do not have a fossil, it is a good
; idea to use this option.
;
;Oldinternal:Starting with version 3.60, I added some revised comm routines
; which are now used under the "Internal" keyword. However, if these
; new routines don't work, then you may use the "oldinternal"
; keyword to select the older routines.
;
;Maxtime: The maxtime parameter will allow you to specify a maximum time
; per session that a user may be in the door. (i.e. if you
; specified 30 minutes, then if the user had 60 mins left, he could
; only play for 30 mins)
;
;Status: Specify "ON" if you wish the status line to appear at the bottom
; of "OFF" if you wish it to be disabled.
;
;Statfore: The foreground color of the status line (default 0)
;
;Statback: The background color of the status line (default 7)
;
;Color1: Tells doordriver to select ANSI graphics when a "1" is passed
; in the graphics parameter of the DORINFOx.DEF. From what I
; understand, FORCE and QUICKBBS require this option set although
; RBBS should not.
;
;NODIRECT: This will turn off direct video writing. If you are using
; desqview and LOD interferes with your other applications, then
; you may wish to uncomment this line.
;
;NOAUTOMAINT: By Default, LOD will perform maintenance when the first user
; logs on each day. Thus, the /M maintenance switch is not
; necessary. However, if you want to control the maintenance
; runs, then you may uncomment this switch and use the
; traditional /M command line option to force maintenance.
;
;ANSIRANK: Specifies the name of the file where ANSI rankings will be
; placed.
;
;ASCIIRANK: Specifies the name of the file where ASCII rankings will be
; placed.
;
;MAXTIME: Specifies the maximum time per day for each user in minutes.
; Defaulted to unlimited.
;
;TIMESLICE: (For Dos REAL mode only) Tells LOD to attempt to determine the
; multitasker in use and release timeslices while LOD is waiting.
; Should improve system performance under desqview.
;
;NOSHUTDOWN: Disables shutdown and/or deinitialization of serial routines
; upon exit of LOD. Use with caution.
;
SYSOPFIRST SCOTT
SYSOPLAST BAKER
BBSNAME THE NOT-YET-NAMED BBS
;
; ::::------- Put your bbs type here! Select from those listed above
; ::::
; \/\/
BBSTYPE RBBS
;
; If you are using a bbs type that doesn't provide the com
; ::-------- port num in it's door information file (such as pcb-12),
; \/ then uncomment this line and put your com port here.
;COMPORT 1
;
; ::------ If you are using a locked com port, then you may wish to
; \/ un-comment and use this line.
;LOCKBAUD 38400
;
;
; ::-------- Uncomment this if you DO NOT want to use a fossil driver.
; \/ (I recommend using a fossil if at all possible)
;INTERNAL
;
; ::-------- If you insist on not using a fossil driver, and INTERNAL
; :: above doesn't work, then try the following instead. (Note,
; \/ you may use INTERNAL or OLDINTERNAL, but NOT both)
;OLDINTERNAL
;
; Uncomment this line if you are running a monochrome
; ::-------------- system on the local side.
; \/
;MONO
;
STATUS ON
STATFORE 0
STATBACK 7
; Uncomment this if LOD doesn't give color output to users
; ::-------------- who have color (ansi) selected.
; \/
;COLOR1
;
;NODIRECT
;
;NOAUTOMAINT
;
ANSIRANK LODRANK.ANS
;
ASCIIRANK LODRANK.ASC
;
;MAXLODTIME 60
;
;TIMESLICE