home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
BBS
/
DWNSRT57.ZIP
/
DOWNSORT.CFG
< prev
next >
Wrap
Text File
|
1993-06-24
|
20KB
|
384 lines
;
; ██▐███ █▐███ ██ ██ ██▐███ ██▐████ █▐███ ██▐███ ██▐████
; ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ▐██
; ██ ██ ██ ██ ██ █ ██ ██ ██ ██▐████ ██ ██ ██▐███ ▐██
; ██ ██ ██ ██ ██ █ ██ ██ ██ ██ ██ ██ ██ █ ▐██
; ██▐███ █▐███ █▐███ ██ ██ ██▐████ █▐███ ██ ██ ▐██
; (font 2)
;
;
; ▄▀▀▀▄ ▄▀▀▀▄ █▄ █ █▀▀▀▀ ▀█▀ ▄▀▀▀▄ █ █ █▀▀▀▄ ▄▀▀▀▄ ▀▀█▀▀ ▀█▀ ▄▀▀▀▄ █▄ █
; █ █ █ █▀█▄█ █▄▄ █ █ ▄▄ █ █ █▄▄▄▀ █▄▄▄█ █ █ █ █ █ ▀▄█
; ▀▄▄▄▀ ▀▄▄▄▀ █ ▀█ █ ▄█▄ ▀▄▄▄▀ ▀▄▄▄▀ █ ▀▄▄ █ █ █ ▄█▄ ▀▄▄▄▀ █ █
; (font 1)
;
;
; █▀▀▀▀▀▀ █ █ █▀▀▀▀▀▀
; █▄▄▄▄▄▄ █▄ █▄ █▄▄▄▄▄▄
; ██ ██ ██ ██
; ██ ██ ██▄▄▄▄▄ ██▄▄▄▄▄
; (font 3)
; (font 4 is reverse video of 3)
;
; ┌─────────────────────────────────────────────────────────────────────────┐
; │ Sample Configuration File for DOWNSORT by Rob Hamerling │
; └─────────────────────────────────────────────────────────────────────────┘
;
; NOTES: Leading blanks are skipped.
; Lines with '%', '*' or ';' as first non-blank character are
; considered to contain comments only. So are empty lines and
; lines with a valid keyword, but without any parameter.
;
; ! Don't put a comment string after a parameter specification !
;
;
; AreaDat: Complete file-specification of your 'AREA.DAT'
; -------
; AREA.DAT is made by MAXIMUS' SILT(P) with -a or -x
; option the path is normally specified in MAX.CTL
; with the option AreaDat in Session Section.
; With the AreaDat you may specify any file that has
; the SILT(P)-format. For example you may make a special
; file for running DOWNSORT with a subset (selection)
; of the normal MAXIMUS file-area's.
; This might be useful for special usergroups.
; Another reason may be the memory usage of DOWNSORT
; under DOS. If you hit the boundary: make a subset.
; Standard OS/2 / DOS naming applies.
AreaDat area5124.dat
; AreaINclude Select area's to be INCLUDED in the reports.
; AreaEXclude Select area's to be EXCLUDED from the reports.
; ----------- Specify 1..9 character areanames to indicate which areas
; have to be INcluded or EXcluded. The selection applies to
; all areanames starting with the same characters (may be a
; GROUP of areas!). The selection is case-INsensitive.
; Use ONLY ONE operation: either AreaINclude or AreaEXclude!
; If all your selections do not fit on a single line
; (max 255 characters) take as many lines as you like.
; In total you may specify a maximum of 200 area's.
; Separate the areanames with one or more BLANKS.
; NOTE: A high area-privilege may overrule AreaINclude!
* AreaEXclude F
* AreaINclude F1 F2 F3
; AreaOrder Order in which areas have to be sorted.
; Selection can be: K[eep] - Keep order of AREA.DAT
; A[lpha] - Alphabetic order of areaname
; G[roup] - Group order
; I[nclude] - order of areaINclude (above)
; Specify one of these orders (first letter is sufficient).
; 'Group'-order is a special sorting sequence for area names
; consisting of a group of letters followed by digits.
; See the documentation for details.
; Default: Group-order (also with invalid specifications)
AreaOrder Group
; TitleFont: Reference number of the BLOCK-font you want for your Title.
; ---------
; Valid numbers: 1 .. Simple font (5x6 pattern)
; 2 .. Pseudo-Stencil Font (7x10 pattern)
; 3 .. ROBoComputer Font (7x8 pattern)
; 4 .. Reversed Video RoboComp (7x8 pattern)
;
; NOTE: The fonts are based on the US-codepage (437).
; This will also work properly for 860 (Portugese),
; 863 (Canadian-French) and 865 (Nordic).
; If codepage 850 (Multilingual) is active, the pattern
; will be adapted a little, see if you like it or not.
; The differences apply mainly to Font2.
;
; The heading of this file shows font 2, 1 and 3 respectively.
TitleFont 2
; Title: Short string that will be displayed in BLOCK-characters
; ----- on top of all FileLists (except BBS-list).
; You may specify this parameter also on the xxxFileList
; parameter.
; The BLOCK fonts are 'proportional', the following number of
; characters will generally fit on a line:
;
; FontTitle 1 maximum characters: 13
; " 2 .. 4 " " 8
;
; No more than 20 characters are accepted as input.
;
; If Title isn't specified, it will be DOWNSORT by default.
; Not all characters are supported, and that may vary with
; the font itself. All fonts support:
;
; - UPPER case A..Z
; - LOWER case a..z , but will be translated to UPPER case
; - Digits 0..9
; - - (hyphen), blank
;
; In addition fonts 1 and 2 support the following characters:
;
; _ * - | . [ ] ( ) / \
;
; Not-supported characters are displayed as blank.
; The '~'-character (tilde) may be used as required blank,
; the '`'-character (reverse quote) as half width blank.
Title `DownSort
; PreTitle Lines to be displayed immediately before the BLOCK-title.
; -------- The lines will be copied asis, however leading blanks are
; skipped, no wrapping or truncation will be applied for
; 'long' lines, '~' (tilde) characters are translated to
; blanks. You may specify 20 PreTitles, excess is ignored.
; Empty PreTitle lines are ignored and not counted.
; There is no default pretitle.
; To create empty lines in your header specify a PreTitle
; with a tilde.
PreTitle ~
PreTitle ~~~~~~~<═════:═════ p r e - t i t l e ═════:═════>
PreTitle ~
; SubTitle Lines to be displayed immediately below the BLOCK-title.
; -------- Maximum 20 SubTitles are accepted, and exactly the
; same rules apply as for PreTitle.
;
SubTitle ~
SubTitle ~~~~~~~<═════&═════ s u b - t i t l e ═════&═════>
SubTitle ~ Overview of downloadable files on this magnificent Board
SubTitle ~ Node number 9.999/99, modemspeeds: V.99/V.99bis
SubTitle ~~~~~~~<═════════════════════════════════════════>
SubTitle ~
; BottomLine Lines to be displayed at the end of the filelist.
; ---------- Maximum 20 BottomLines are accepted, and exactly the
; same rules apply as for PreTitle and Subtitle.
;
BottomLine ~
BottomLine ~~~~~~~<═══════ b o t t o m : t i t l e ═════════>
BottomLine ~
BottomLine ~~~~~~~<═══ How do you like DOWNSORT, folks? ════>
BottomLine ~
; MaxNewFiles Limit the number of file entries in BBS-list and NEW-list(s).
; ----------- It specifies the actual number of file entries that may
; appear in NewFileList and BBSFileList.
; If you specify more than one privilege for NewFileList,
; then each list will contain (max) the MaxNewFiles number
; of file entries, but the collection of each may differ due
; to privilege considerations.
; Individual values for BBS-list and NEW-list may be specified
; on the corresponding xxxFileList line (see below)
; Optionally the value may be followed by a single letter.
; In stead of the number of files, the list will then be
; limited by the age of the files to be included:
; in days (D), weeks (W) or Months (M).
MaxNewFiles 3W
; NonDupEXT Suppress reporting as 'duplicate' if 2 files with equal
; --------- filenames but unequal extensions are defined as 'pair'.
; 5.7 The example specification below has the effect that files of
; 5.7 any pair "xyz.SDA" and "xyz.SDN" ("xyz": any filename) will
; 5.7 not be listed in DupFileList.
; 5.7 - Files with equal filename AND equal extension will
; 5.7 still be reported as duplicate even when the extension
; 5.7 is one of a 'NonDupEXT' pair!
; 5.7 - Multiple extensions must be specified in as many pairs as
; 5.7 can be formed (3 extension 3 pairs; 4 ext. 6 pairs; etc)
; 5.7 (e.g: for Nodelists: DAT EXT DAT IDX EXT IDX).
; 5.7 Multiple pairs can be specified on a line, and multiple lines
; 5.7 can be specified: in total up to 100 pairs will be accepted.
; 5.7 Default: no suppression
NonDupEXT SDN SDA
; OrphanDesc Description text of Orphan files.
; NotFoundDesc Description text of files without description in FILES.BBS.
; ------------ The description will replace the default hard-coded text.
; Up to 45 characters may be specified.
; The '~' (tilde) character will not be translated here!
OrphanDesc ~~~~~ !!!! Orphelin !!!! ~~~~~
NotFoundDesc +++ Ce fichier défie toute description! +++
; OfflineDesc When a filespecification is found in FILES.BBS but not
; ----------- in the corresponding download directory, this text replaces
; the filesize and date (right aligned).
; Up to 14 characters are accepted.
OfflineDesc -- archived --
; AVAstrip You may wish to strip off AVATAR graphics characters from
; -------- the contents of your FILES.BBS files.
; Specify 'No' to deactivate stripping (default is 'Yes').
; ==> Works ONLY for COMMENT LINES in ALL- and IPF-lists, and
; remember: comments are only listed with KEEPSEQ (no sort).
AVAstrip Yes
; ======================================================================
; Above were the parameters with a global effect: applicable to all
; lists or to the execution mode of DOWNSORT.
; Below follow list-specific parameters, which might override some of
; the settings of the global parameters.
; Leave this sequence: first global, then specific parameters!
; ======================================================================
;
; xxxFileList: Create one or more File lists of type 'xxx'.
;
; xxx ───┐ ┌──────────── TWIT
; v │┌─────────── DISGRACE ┌─ FileName of the list
; ┌── ORP ││┌────────── LIMITED │ (without extension,
; ┌── BBS │││┌───────── NORMAL │ maximum 8 characters)
; ┌── NEW ││││┌──────── WHORTY │
; ┌── ALL │││││┌─────── PRIVIL │
; ┌── GBL ││││││┌────── FAVORED │
; ┌── DUP │││││││┌───── EXTRA │ ┌─ Additional options for
; ┌── IPF ││││││││┌──── CLERK │ │ each list individually:
; ┌── IP2 │││││││││┌─── ASSISTSYSOP │ │
; ┌── OK ││││││││││┌── SYSOP │ │ -W - Wrap Description
; ┌── EMI │││││││││││┌─ HIDDEN │ │ -T - Truncate Descr.
; │ ││││││││││││ │ │ -A - Alpha sort on name
; │ ││││││││││││ │ │ -D - Date sort
; │ ││││││││││││ │ │ -K - Keep FILES.BBS seq
; │ ││││││││││││ │ │ -If - Include_filespec
; │ ││││││││││││ ┌─────────┘ │ nnnP - max number of entries
; │ ││││││││││││ │ │ -Fn - Title font (0..4)
; │ ││││││││││││ │ │ -X - eXcl priv in headers
; v ││││││││││││ v v
; ═══─═══════ vvvvvvvvvvvv ════════ ════════════════════════════════
; xxxFileList TDLNWPFECASH FileName Option-1 Option-2 . . . Option-n
;
; If just xxxFileList is specified, the Level by default will be SYSOP
; and the filename will be DOWNSORT.
;
; For NEW-, GBL-, ALL-, IPF-, OK- and EMI-List up to 10 privilege letters
; can be specified and for each character a separate list-file will
; be generated with the following extension:
; NewFileList: N~p
; AllFileList: A~p
; IpfFileList: I~p
; GblFileList: G~p
; OKFileList: O~p
; EmiFileList: E~p
; where 'p' is the privilege character.
; For the BBS- and DUP-list only 1 privilege character will be accepted.
; The default filename (DOWNSORT) for each list can be overridden
; with the [optional] third parameter on the xxxFileList line.
;
; Additionally the following parameters may be specified (in any sequence).
;
; nnn[P] Limit the number of file-entries to a maximum of 'nnn':
; - for BBS-list and NEW-list the max size of the list
; - for IPF-list the maximum size of a VIEW-page
; If followed by Period-indicator ('d', 'w' or 'm') the list is
; limited not by number, but by file-AGE in Days, Weeks or Months.
; NOTE: the Period-indicator is not valid for IPF-lists.
;
; -A Selects Alphabetic sort on filename
; -D Selects sort on Date/Time of the file
; -K Keep sequence of files in FILES.BBS
; (ALL- and IPF-list, and newly generated FILES.BBS files).
;
; -T Causes Truncation of long descriptions (to about 50 characters)
; so that only 1 line will appear per file-entry.
; -W Causes Wrapping of long descriptions: the report will contain
; as many lines as needed for the complete description.
;
; -L Long list format:
; - OK-file: explicit filenames in stead of wildcards (PATH\*.*)
; - not applicable to other lists except FILFilePath (see below)
;
; -If Include userfile (f = file-spec) just behind the block-title
; (if any). The file is included without any translation, so beware
; of special characters and effects like formatting (text-float) in
; the IPF- and IP2-list!
; NOTEs: - does not apply to BBS-, DUP- and ORP-FileLists.
; - BBSFileList includes DOWNSORT.HDR and DOWNSORT.TRL
;
; -X eXclude privilege indications in NEW-, ALL-, IPF- and GBL-lists.
;
; -Fn ListTitle font. Choose for 'n': 1, 2, 3 or 4 (default is 2).
; See some samples of the fonts in the top of this file.
; If '0' (zero) specified, then NO BLOCK TITLE will be generated.
;
; If an asterisk (*) is used as parameter value character, the hardcoded
; default value will be used. If you specify mutually exclusive
; options (-A or -D) or (-T or -W), then the last value on the line
; will be effective.
;
; NOTES 1. For ORP-fileList the privilege parameter does not apply.
; ----- 2. Invalid or not-recognised sub-parameters will be ignored
; without warning!
; 3. You may specify only 1 line for each list-type.
AllFileList s Down_All -k -W -f4 -IDownsort.Inc
BBSFileList s Down_Bbs 3w -d -w -F1
DupFileList s Down_Dup -w -F4
GblFileList s Down_Gbl -a -t -F3 -IDownsort.Inc
IpfFileList s Down_Ipf 200 -a -F3
Ip2FileList s Down_Ip2 200 -a -F3
NewFileList s Down_New 2m -a -t -f2
EmiFileList s Down_Emi 22 -d -w -IDownsort.inc
OKFileList s Down_OKE -l -IDownsort.Mag
OrpFileList * Down_Orp -a -w -f4
; NOTE: The IPF-list has the format of an INPUT-file for the
; Information Presentation Facility Compiler (IPFC), which is
; part of the IBM OS/2 Program Development Toolkit and equivalent
; MicroSoft package. This inputfile has to be processed by this
; compiler. For the sample above with the command:
; IPFC DOWN_IPF.I~P /INF
; Be sure to have the file DOWNSORT.BMP in the default directory and
; set the IPFC environment-variable (e.g. SET IPFC=D:\TOOLKT13\IPFC).
; IPFC will produce a file called DOWN_IPF.INF, which is ready
; to be viewed with the command:
; VIEW DOWN_IPF
; See the Toolkit documentation for details of IPFC.
; IPFC is not distributed with the DOWNSORT package!
;
; IP2FileList has the OS/2 2.0+ IPF format, you will need IPFC
; of the OS/2 2.0+ toolkit!
; ======================================================================
; FILFilePath Specifications for the "FILES.BBS"-type of output.
; ----------- - First parameter is privilege selection flag. Specify '*'
; to get all files, even the newly uploaded ones.
; - Second parameter is [optional] specification of
; destination directory of newly generated Files.BBS files.
; Use the format: drive:\directory\
; If destination path is specified, the output filename will
; 5.7 be "FILES.ac", extension will be the first 3 characters of
; 5.7 areaname. However when 'long' areanames are present (>3 char),
; 5.7 the output-file will be called "areaname.BBS".
; If not specified the MAXIMUS path specification will be
; used (ListFile parameter if used in Maximus' AREA.CTL
; otherwise the Download directory).
; - Many but not all flags as defined for the 'real' lists
; apply to the FILES.BBS-output of Downsort, for example:
; - TITLE is not applicable to FILES.BBS
; - file-description will be kept on a single line, not
; wrapped or truncated, even if longer than 240 characters.
; - Entries can be sorted, but then you will loose your
; comments (if any): -K (Keep Sequence) is default.
; 5.7 - The -L (LONG) means here: include file size and file date.
; - Avatar codes will be kept unchanged.
FILFilePath s \c2\downsort\filesbbs\ -a -X -l -idownsort.inc -F4
;
; ═════════════════════════════════════════════════════════════════
;
; Commandline parameters may supply additional options, and may
; (partly) override the specifications in this configuration file.
; Consider this file as your customised default setting for DOWNSORT,
; and use commandline parameters only to make other lists on the fly.
; For the reports there is nothing that you can specify with commandline
; parameters, that you cannot specify in this configuration file!
;