home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
BBS
/
CL14S23C.ZIP
/
CALLS.CNF
next >
Wrap
Text File
|
1992-10-19
|
10KB
|
294 lines
;
; Configuration file for CALLS v14s23c.
; Anything following ";" is a comment.
; Keywords may appear in any order.
; Default values will be used for keywords not specified in the config file.
;
;full name of caller input file (or NUL) - Default = CALLER
INFILE C:\PCB\MAIN\CALLER
;output file to produce - Default = BLT99
OUTFILE C:\PCB\GEN\BLT11
;input file of a Header to precede report - Default = NUL
;HEADER C:\PCB\GEN\BLT11.HD
;file for saved history information (or NUL) - Default = CALLS.SAV
SAVEFILE CALLS.SAV
;file for outputting any unknown line for study (or NUL) - Default = NUL
UNKNOWNFILE UNKNOWN.TXT
;include all unknown lines in unknown file - Default = YES
UNKNOWNREPORT YES
;include all Junk lines in unknown file - Default = NO
;junk lines are those recognized by CALLS and skipped over.
JUNKREPORT YES
;include all Catchall lines in unknown file - Default = NO
;Catchall lines are those recognized by CALLS in the Catchall routine which
;picks up lines missed by the normal scan (some just have to be done this way)
CATCHALLREPORT YES
;include all Door lines in unknown file - Default = NO
DOORREPORT NO
;number of nodes to scan (1=single node mode) - Default = 1
NODES 1
;list of nodes (in order of desired scan, NODES should equal the number of
;nodes included in the list. If no list provided then all nodes will be
;scanned from 1 to NODES)
;NODES 3
;NODELIST 5 3 1
;list of reports to produce from the following list - ANSTBCXO!RPDEVU^-F=GY1Y2Y3Y4Y5Y6Y7Y8#HIJKLQ&M
;
; A - system statistics B - graphic modes
; C - baud rates D - hourly usage
; E - conferences joined F - bulletins read
; G - doors opened H - download protocols
; I - download efficiency J - upload protocols
; K - upload efficiency L - batch sizes
; M - files downloaded N - security statistics
; O - security level counters P - connect type analysis
; Q - free downloads *Not PCB* R - Minutes used by Security
; S - Sysop Statistics T - User Statistics
; U - User Messages V - Conf Messages
; W - Event Report X - Language Report
; Y - Door Report Z - insert a blank line
; @ - insert a @MORE@ prompt $ - insert a @PAUSE@ prompt
; % - insert a @WAIT@ prompt * - insert a @CLS@
; ! - Last Called In Report # - Message Statistics
; = - Time Spent in Doors Report ^ - User Uploads
; - - Callers Hanging Up & - Caller ID Report
;
; Door Reports are followed by number
; 1 - InstaReg 2 - PCBVerify
; 3 - Callback 4 - Depository
; 5 - MailDoor (Generic) 6 - QMail
; 7 - MarkMail 8 - User Definable
;
REPORTS *ANZSTZBCDXO!RPEVU^-F=GY1ZY2Y3ZY4Y5ZY6Y7ZY8#HIJKL&MW%
;Exclude accumulation of Data for graph reports - Default - None
;Allowable entries are (CEFLOPQRUVWXY!=^-&)
;REPORTEXCLUDE Y
;Action to perform after each section
;Allowable entries are (Z@$%*)
REPORTACTION Z%*
;Type of report to output, ASCII, ANSI, BOTH or PCBOARD - Default - BOTH
REPORTTYPE PCBOARD
;peak hours to report
; 1 2
; 012345678901234567890123
PEAK YNNNNNNNNNNNNNNNNYYYYYYY
;shorten graph to just percentage used - Default = no
;NO/YES/or the minumum percent to start at
SHORTENGRAPH 50
;full name of Sysop or SYSOP
SYSOPNAME GARY MEEKER
;First Name to Exclude from stats (RNET.EXE is always excluded)
; up to 10 entries are allowed (this is not for USER names!)
;EXCLUDENAME RNET.EXE
;Full User Name to exclude from stats (User Messages Left, Uploads and
; Caller Hungup Reports). Up to 50 entries are allowed.
; Adding '*' as first character of name will flag User as a NetUser.
;EXCLUDEUSER GARY MEEKER
;Conferences to exclude from stats (Bulletins Left, Conferences Joined and
; Conference messages left) Up to 50 entries are allowed.
;EXCLUDECONFERENCE 12
;Security Levels to exclude from stats (Number of Calls and Hours Used)
; Up to 50 entries are allowed.
;EXCLUDESECLEVEL 120
;Door to exclude from stats (Doors Opened and Time Spent in Doors)
; Up to 50 entries are allowed.
EXCLUDEDOOR REMOTE
;Label given to the Doors that are excluded. - Default = Unlisted
;NONDOORNAME Unlisted
;Area Code for CALLER ID Report. If matched then is considered a Local Call.
AREACODE 404
;Save filenames & counts in the history information file YES (default) or NO
FILENAMES YES
;File mask of files to be ignored completely, wildcards allowed
; up to 10 entries are allowed (wildcard '#' matches any digit)
FILTERFILES *.GIF
FILTERFILES *.TIF
FILTERFILES *.PIC
FILTERFILES #####?.ZIP
FILTERFILES #####?.CAP
;number of "User Messages Left" to report
MAXUSERS 30
;number of "User Uploads" to report
MAXUL 30
;number of "Callers Hanging Up" to report
MAXHANGUP 30
;number of "Conference Messages Left" to report
MAXMSGS 20
;number of "free downloads" to report
MAXFREE 10
;maximum number of conferences to report
MAXCONF 20
;maximum number of bulletins to report
MAXBLT 20
;maximum number of doors to report
MAXDOOR 20
;maximum number of batch sizes to report
MAXBATCH 5
;minimum d/l's to include a file in report
MINDL 2
;redefine protocol names
PROTOCOL A Ascii (Non-Binary)
PROTOCOL X Xmodem (Checksum)
PROTOCOL C Xmodem (CRC)
PROTOCOL O 1K-Xmodem (Ymodem)
PROTOCOL F 1K-Xmodem-G(Ymodem/G)
PROTOCOL Y Ymodem (PCB Batch)
PROTOCOL G Ymodem/G(PCB Batch)
PROTOCOL D Ymodem (DSZ Batch)
PROTOCOL H Ymodem/G(DSZ Batch)
PROTOCOL Z Zmodem (DSZ Batch)
PROTOCOL N None
;redefine Door Names - (I,V,C,D,G,Q,M,U)
;corresponds to report - Y(1,2,3,4,5,6,7,8)
;
; A '/' may be used to seperate Mulitple Door Names for the Same Door
; (Note: No spaces allowed) ie. DOOR I INSTAREG/RENEW
;
DOOR I INSTAREG
DOOR V VERIFY
DOOR C CALLBACK/CALLME
DOOR D DEPOSIT
DOOR G MAIL
DOOR Q QMAIL4
DOOR M MM-2/MM2/MARKMAIL
DOOR U REGISTER
;Text to be added before the Security Level - Default = Level
SECLABEL Security Level
;Text to be added before the Security Level - Default = ''
;if blank then line will not be printed
NOSECLABEL No Security Level
;Maximum item length for variable length items - Default = 20
; (variable length items are defined by ITEMLEN of -1)
;
;ITEMMAX 25
;Item length for graphs, If set to -1 then will be set to longest item
;ITEMLEN C 10
;ITEMLEN P -1
;Report Label for Generic Mail Door - Default = Your Mail Door
;Report Label for User Definable Mail Door - Default = Any Door
;REPORTTITLE A Here's a Title
REPORTTITLE Y5 Cam-Mail Door
REPORTTITLE Y8 Register Door
;redefine User Definable Door Text - (1-20)
;DEFDOOR 1 FIND THIS TEXT
;
; If not defined then the entry will not be scanned for regardless of
; DEFDOORTYPE or DEFREPORT entry. If defined then the text will be
; scanned for anywhere in the line. Order of variables can be important.
;
DEFDOOR 1 ADJUSTED
DEFDOOR 2 CARRIER LOST
DEFDOOR 3 KEYBOARD TIMEOUT
;redefine User Definable Door Variable Type - (1-20)
;DEFDOORTYPE 1 1
;
; When DEFDOOR is defined:
; Bit 2 means Carrier lost, Doesn't count if Door Logged User Off
; Bit 4 means Door Logged User Off
; Bit 8 means Line contains HH:MM entry to stop Door Timing
;
; When DEFREPORT is NOT defined:
; Assigning a 1 means show ' ....................... '
; Assigning a -1 means show ' '
;
DEFDOORTYPE 1 1
DEFDOORTYPE 2 2
DEFDOORTYPE 3 1
;redefine User Definable Door Report Text - (1-20)
;DEFREPORT 1 Found the text
;
; If not defined then the entry will not be Reported, unless DEFDOORTYPE
; is defined in which case a blank entry will be reported.
;
DEFREPORT 1 Security Level Adjusted
DEFREPORT 2 Caller Dropped Carrier
DEFREPORT 3 Keyboard Timeouts
;Include Refused to Register and Access Denied - Refused Registration
REFUSEDREG NO
;redefine Language Names - 20 characters max - (1 - 30)
;LANGUAGE 5 Three Stooges (5)
LANGUAGE 1 English [Default](1)
LANGUAGE 2 Southern Style (2)
LANGUAGE 3 Three Stooges (3)
;define how event time is reported
; EVENTMODE OFF disables calculation of event duration.
; EVENTMODE BUSY calculates event duration and accounts for it
; as 'busy' time (i.e. the system was in use during this time).
; EVENTMODE IDLE calculates event duration and accounts for it
; as 'idle' time (i.e. the system was NOT in use during this time).
EVENTMODE BUSY
;define how Sysop chat time is reported
; CHATMODE OFF disables calculation of Sysop chat duration.
; CHATMODE BUSY calculates Sysop chat duration and accounts for it
; as 'busy' time (i.e. the system was in use during this time).
; CHATMODE IDLE calculates Sysop chat duration and accounts for it
; as 'idle' time (i.e. the system was NOT in use during this time).
CHATMODE IDLE
;define how Node chat time is reported
; NODEMODE OFF disables calculation of Node chat duration.
; NODEMODE BUSY calculates Node chat duration and accounts for it
; as 'busy' time (i.e. the system was in use during this time).
; NODEMODE IDLE calculates Node chat duration and accounts for it
; as 'idle' time (i.e. the system was NOT in use during this time).
NODEMODE IDLE
;Enable filtering of Modem return data - Default = ON
RINGFILTER ON
;Enable filtering of CONNECT from Modem return data - Default = OFF
CONNECTFILTER ON