home *** CD-ROM | disk | FTP | other *** search
/ ftp.wwiv.com / ftp.wwiv.com.zip / ftp.wwiv.com / pub / BBS / CIL20KTA.ZIP / CIL20KIT.DOC < prev    next >
Text File  |  1992-10-22  |  13KB  |  332 lines

  1.  
  2.                    
  3.                           CIL20KIT # 1
  4.                      
  5.               by Rob Brown a.k.a. "The Speed Merchant"
  6.  
  7. This is a kit that allows you to quickly add 20 externally driven protocols, 
  8. several Shells, interface for editors, file managers, TSR and run-time file 
  9. taggers to Cedar Island Link. CIL is a DOS, DV, or Windows communications 
  10. program with AWESOME mouse support. Even run CIL in a small (Virtualized) 
  11. window in DesqView or Windows 3.1, and the RODENT still works !!! CIL20KIT
  12. allows Color or Mono. NOTE : the COLOR version requires ANSI services, as
  13. in ANSI.sys, the MONO version does not.
  14.  
  15. This KIT, as well as some of the protocols and programs use the
  16. environment extensively ! You should have around 200 bytes of
  17. environment space free. The SHELL statement in config.sys is used 
  18. to set the environment. I recommend /E:1024, although a lot less 
  19. is ok. The DOS default is not enough !
  20.  
  21. Cedar Island Link - Cedar Island Software by Mike Caughran
  22.  
  23. Current version of Cedar Island Link : CILNK252.ZIP.
  24.  
  25. If you haven't seen Cedar Island Link you are missing one of the best 
  26. treats in on-line communications.
  27.  
  28. A Mouse is not required for CIL, it is NICE !
  29.  
  30. (See KITFILES.LST for a quick listing of files included in this kit.)
  31.  
  32. ══════════════════════════════════════════════════════════════════════════
  33.  
  34. How to set up :  If you have all desired files this could take 4 or
  35.                  5 minutes !
  36.  
  37. Copy either KITCOLOR.BAT or KITMONO.BAT to the EXTUPx.BAT or
  38. EXTDOWNx.BAT you desire to use for CILINK. DO NOT use EXTUP4.BAT
  39. or EXTDOWN4.BAT for this KIT !!! The "4" bats do not shell to EMS,
  40. XMS, or DISK, so there will not be enough memory to use the KIT.
  41. Either 1, 2, or 3 is OK. You only need to use ONE of the availble
  42. EXTERNALx.bat Options for the KIT. The BATs that are called by KIT
  43. allow user selected upload or dowload !!!
  44.  
  45. Copy to another name, I use EXTDOWN2.BAT and 2.BAT. If I shell
  46. using the F10 - U - DOS Shell option in CIL, it is easier to
  47. type 2 than to type EXTDOWN2 to activate the kit.
  48.  
  49. 1. Copy all files in KIT to the CILINK directory.
  50.  
  51. 2. Copy KITCOLOR.BAT or KITMONO.BAT to the EXTERNALx.bat you
  52.    desire and also an easy to type name like 2.bat. Remember
  53.    if you use 2 names and change one, copy that one to the
  54.    other name !
  55.  
  56. 3. Edit SETS.BAT, self explanantory. Use CIEDIT or any editor
  57.    that saves in ACSII format.
  58.  
  59. 4. For simple setup, put all desired drivers and support files
  60.    in the CILINK directory. You can use a directory on the PATH,
  61.    however you may experience problems if you are not familiar
  62.    with setting protocols to run from the non-default directory.
  63.  
  64. 5. For the protocols listed below that have a setup routine as
  65.    SZCONFIG.EXE or HSCONFIG.EXE, run them before using. All of
  66.    those with a setup are EZ ! These are :
  67.  
  68.   MPT - MPTSET.EXE       HS/Link - HSCONFIG.EXE
  69.   SZ  - SZCONFIG.EXE     Bi-modem has different ones.
  70.  
  71.   (The other protocols need no setup !)
  72.  
  73. Note : You can edit SETS.BAT and even the name(s).bat you
  74.        used while in the KIT !
  75.  
  76. Note : If you have a High Speed Modem , no fancy UART, a
  77.        SLOW computer AND if you get errors using TMODEM,
  78.        ZMAX, or Zmodem ITC, then and only then, edit the
  79.        TBOTH.BAT, ZMAXBOTH.BAT, ZITCBOTH.BAT. What to do
  80.        is easy and is at the top of the bat file. AGAIN
  81.        only if ERRORS occur !!! If you have a real fast
  82.        setup, you can tweak ZMAX by altering the -S
  83.        parameter in the ZMAXBOTH.BAT file, description
  84.        of cahnge is in the file.
  85.  
  86. Note : Non-REGISTERED DSZ/GSZ do not allow DOWNLOAD paths for any
  87.        supported protocols except the Xmodem-k and Xmodem flavours.
  88.        Edit DSZBOTH.BAT and GSZBOTH.BAT to allow DOWNLOADS to end
  89.        up where you want. This is near the end of file ! REGISTERED
  90.        DSZ/GSZ users do not do this !
  91.  
  92. .............       (represents lines before driver name)
  93. .............       (represents lines before driver name)
  94. C:                   ; Drive you want
  95. CD\DOWNLOAD          ; Directory you want Downloads to end up in.
  96. %CIL%\DSZ p %P speed %LR% ha both rz -rrm %ZDL%
  97. C:                   ; Drive where CILINK is
  98. CD\CILINK            ; Directory where CILINK is.
  99. :END
  100. EXIT
  101.  
  102. DSZBOTH.BAT, GSZBOTH.BAT, ZYMOBOTH.BAT, GYMOBOTH.BAT, ZYMGBOTH.BAT,
  103. GYMGBOTH.BAT, ZXKGBOTH.BAT, and GXKGBOTH.BAT may all be altered
  104. this way....
  105.  
  106. You can also use this with DSZTERM.BAT  (DSZTRMMO.BAT is Mono verson)
  107. and GSZTERM.BAT (GSZTRMMO.BAT is mono version) to allow downloads
  108. where you want. If you have REGISTERED DSZ or GSZ, edit the TERM bats
  109. mentioned above and add %ZDL% on end on command line. I could not
  110. include these or you because the terminal aborts if called with
  111. unsupported parameters. You might also add 8g as in -rrm8g to the
  112. -rrm already on the command line to support ANSI graphics (only
  113. REGISTERED DSZ/GSZ).
  114.  
  115. I use the DSZ Terminal as a quick way to dial out for mail and
  116. files. Term requires only 80K and you can run the entire kit
  117. from DOS if you want, do not need to be in CIL to use !
  118.  
  119. ══════════════════════════════════════════════════════════════════════════  
  120.  
  121. Quick list of recommended programs, many others can be used ! Many
  122. of them are available in other than the ZIP format. Descriptions
  123. follow this quick list.
  124.  
  125. HSL113C4.ZIP or newer.
  126.  
  127. DSZxxxx.zip GSZxxxx.zip of 1990 or newer (05-03-92 versions are out)
  128.  
  129. SZMOD200.ZIP and SZSUP200.ZIP verified as latest version 10-18-92.
  130.  
  131. TMOD720.ZIP or newer TMOD900.ZIP verified as latest version 10-18-92.
  132.  
  133. ZMAX320.ZIP or newer.
  134.  
  135. ZMOD1310.ZIP or newer. Verified as latest version 10-18-92.
  136.  
  137. MPT110.ZIP or newer.
  138.  
  139. BIMOD124.ZIP or newer.
  140.  
  141. TAGIT11.ZIP or newer. Verified as latest version on 10-18-92.
  142.  
  143. TAG160.ZIP or newer (Virtually required !)
  144.  
  145. FATG30.ZIP or newer. Verified as latest version on 10-18-92.
  146.  
  147. TAGGER37.ZIP or newer. Verified as latest version on 10-18-92.
  148.  
  149. HSLSHELL.ZIP 1.0 or newer.
  150.  
  151. There are many other protocols, shells, and taggers that could be easily
  152. added to this kit.
  153.  
  154. ══════════════════════════════════════════════════════════════════════════
  155.  
  156. Protocols supported directly by this KIT :
  157.  
  158.  
  159. DSZ/GSZ  - by Omen Technology. Zmodem, Ymodem-g, True Ymodem,
  160.            Xmodem-1K-g (Qmodem), Xmodem-1K, Xmodem CRC, Xmodem
  161.            OVER TRUSTER (DSZ only), and Omen Terminal mode.
  162.            Actually slower than most of the others supported
  163.            by this kit. No setup required.
  164.  
  165. HS/Link  - by Sam Smith. High Speed Bi-Directional protocol with
  166.            CHAT function. If sending and receiving as the same
  167.            time this is the fastest. Also very fast in a single
  168.            direction. Look for HS113C5.zip or later. Run
  169.            HSCONFIG.exe to setup, EZ !.
  170.  
  171. Bi-Modem - Includes calling BAT for those that already use
  172.            Bi-Modem. Pretty fast at 2400 to 9600 Baud. Look
  173.            for BIMOD124.zip or later.
  174.  
  175. Tmodem   - Tmodem by International TeleCommunications. Faster
  176.            than DSZ/GSZ with better error correction. If you
  177.            need a protocol for speed on bad lines use this !
  178.            Supports Tmodem 7.20 up. TMOD900.zip is last version
  179.            as of 10-21-92. No setup required.
  180.  
  181. Z ITC    - Zmodem by International TeleCommunications. Faster
  182.            than DSZ/GSZ, supports Turbo mode, compatible with
  183.            DSZ/GSZ and SZ. with excellent error correction.
  184.            No setup required.
  185.  
  186. Super Z  - Super Zmodem (SZ) by Scott Baker. Faster than DSZ/GSZ,
  187.            and allows DOS work and you can CHAT or play games
  188.            while transferring files. Compatible with DSZ/GSZ and
  189.            many other Zmodem implementations. SZMOD200.zip with
  190.            SZSUP200.zip is last known version. Run SZCONFIG.exe
  191.            to setup, EZ !
  192.  
  193. ZMAX    - Zmodem implementation by Mike Bryeans. Not compatible
  194.           with DSZ/GSZ, however very FAST with good error
  195.           correction. Can be used in non-streaming mode for
  196.           good speed on noisey lines (setup here is streaming
  197.           yet can easily be changed, just add -A to command line).
  198.           No setup required. Last known version is ZMAX320.zip.
  199.  
  200.  
  201. MPT    - Mpt by Matthew Thomas. Exceptional speed and error
  202.          correction. Last known version MPT110.zip. Run
  203.          MPTSET.exe to setup, EZ !
  204.  
  205. 9 other protocols are easily added using the ?BOTH.BAT files.
  206. i.e. DBOTH.BAT or EBOTH.BAT.
  207.  
  208. All the protocols that allow Auto-resume, keep aborts, over-write
  209. files, and use @files.lst have those features enabled by this KIT.
  210. -g protocols require an MNP modem. A 16550AFN UART or Intelligent
  211. equivalent UART is desired for High Speed Modems and/or Multi-
  212. Tasking, although not absolutely required.
  213.  
  214.  
  215. ────────────────────────────────────────────────────────────────────────
  216.  
  217. Shells directly supported : (2 additional shells are easily added)
  218.  
  219. HSLSHELL - by Roger Kirchoff. Shell for HS/Link, can tag files,
  220.            edit HSLFILES.LST, del list, start HS/Link. HSLSHELL.zip
  221.            is last known version. Run HSLSHELL and select (S) settings,
  222.            edit as needed then exit to save. Mine is :
  223.  
  224.            C:\CILINK\HSLINK @HSLSHELL.LST -P1
  225.  
  226.            (Don't change the default HSLSHELL.LST, you can
  227.             copy this to files.lst or copy files.lst to
  228.             hslshell.lst from within the kit.)
  229.  
  230. TAGFILE  - by Tom Hansen. Upload or Download with Zmodem, Ymodem-g,
  231.            True Ymodem, HS/Link, Bi-Modem, and one user defined
  232.            protocol. Allows upload file tagging editing, DOS
  233.            shell, and can even add file descriptions to Zips.
  234.            Also includes DIRN.exe which is used as the default
  235.            Quick Tagger in this KIT. Last known version is
  236.            TAG160.zip. Edit DGS.DEF to use, mine is :
  237.  
  238.            files.lst            ; set this as KIT default !
  239.            ha both sz
  240.            sb
  241.            handshake both sb -k
  242.            -@ -NV -UC:\DOWN -S4096
  243.            /I BIMOD1.LOG
  244.            C:\DOWN\
  245.            MPT.EXE P1 S @C:\CILINK\FILES.LST
  246.            MPT Batch
  247.            c:\cilink\ciedit.exe
  248.            1
  249.            57600
  250.            COM
  251.            Y
  252.  
  253. ────────────────────────────────────────────────────────────────────────────
  254.  
  255.  
  256. TSR file taggers directly supported ( you can use others.)
  257.  
  258. TAGIT  - by Tim O'Pry of Micro Business Consultants. Last know version
  259.          TAGIT11.ZIP (this is my favorite). Allows on-line and off line
  260.          file tagging with options to read or write to file. Hot key
  261.          is ALT SPACEBAR and uses 18K memory.
  262.  
  263.          TAGIT /S  ; loads and turns off beeps
  264.          CILINK    ; run CIL
  265.          TAGIT /U  ; Unload
  266.  
  267.  
  268. TAGGER - by E. J. Blayer. Online and off line tagging for uploads
  269.          and downloads with good Mouse support. ALT Z is default
  270.          hot keys, can be user defined. TAGGER37.zip is last
  271.          known version. Also allows block and cut, usefull
  272.          for online meesaging and other functions.
  273.  
  274.          TAGGER CILINK   ; loads TAGGER and CILINK
  275.                            When you exit CILINK, TAGGER will unload.
  276.  
  277. FILETAG - by Gasner & Associates. Online and Offline tagging for
  278.           uploads and downloads. Default hot keys are ALT Z, can
  279.           be user defined. Allows read and write to file with
  280.           file edit. LAst know version is FTAG30.zip. Run
  281.           FTCONFIG.exe and set data directory to CILINK dir, i.e
  282.           C:\CILINK.
  283.  
  284.           FILETAG /L   ; loads
  285.           CILINK       ; run CIL
  286.           FILETAG /U   ; unloads
  287.  
  288.  
  289. Note : A directory listing of any desired path can be performed
  290.        while in the KIT. You can also use the TSR file taggers
  291.        to Mark meesages during a quick scan and use the file
  292.        tagger to recall those you want to read. I use this on
  293.        BBS's that do not support (or if I don't use) a QWK
  294.        mail door.
  295.  
  296. ─────────────────────────────────────────────────────────────────────────
  297.  
  298. Other functions :  (many can be altered or easily added.)
  299.  
  300. ? Help   - Configure your own help screens.
  301.  
  302. EDITOR   - CIEDIT is used by default, can use any you like.
  303.  
  304. File Mgr - I use Norton Commander, use any you desire.
  305.  
  306. Memory   - DOS 5.0's MEM /C, can change easily.
  307.  
  308. Memory Tool - I use QEMM's MFT (Manifest), alter as you need.
  309.  
  310. Copy     - Copy FILES.LST to HSLSHELL.LST and the reverse.
  311.  
  312. Show Environment, edit the SETS.BAT, even edit the BAT file
  313. you choose to name the KITCOLOR.bat or KITMONO.BAT. If you
  314. accidently hit an un-supported key stroke, you are shown
  315. what key you hit and returned to menu for a proper option.
  316. Besides the 9 user defined protocol options, and the other
  317. options already mentioned, there are 8 more user defined
  318. options available.
  319.  
  320.  
  321. Enjoy,
  322.  
  323.     Rob Brown   a.k.a. "The Speed Merchant"
  324.  
  325.  
  326. Contact via RIME, ILink, NaNet, Intelec, FIDO and other
  327. Echos/Nets, usually in the COMM, DesqView, Windows, or
  328. any conference dealing with Networks.
  329.  
  330.  
  331.  
  332.