home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HaCKeRz KrOnIcKLeZ 3
/
HaCKeRz_KrOnIcKLeZ.iso
/
chibacity
/
comlocks.doc
< prev
next >
Wrap
Text File
|
1996-04-23
|
1KB
|
29 lines
How to Pick Master Combination Locks
1st number:
Get out any of the Master locks so you know what's going on. The
handle part (the part that springs open when you get the
combination), pull on it, but not enough so that the knob won't
move. While pulling on it turn the knob to the left until it
won't move any more. Then add 5 to this number. Congradulations,
you now have the 1st number.
2nd number:
Ok, spin the dial around a couple of times, then go to the 1st
number you got, then turn it to the right, bypassing the 1st
number once. WHEN you have bypassed. Start pulling the handle and
turning it. It will eventually fall into the groove and lock.
While in the groove pull on it and turn the knob. If it is loose
go to the next groove; if it's stiff you got the second number.
3rd number:
After getting the 2nd, spin the dial, then enter the 2 numbers,
then after the 2nd, go to the right and at all the numbers pull
on it. The lock will eventually open if you did it right. If
can't do it the first time, be patient, it takes time.