Hackers Toolkit v2.0

home *** CD-ROM | disk | FTP | other *** search

/ Hackers Toolkit v2.0 / Hackers_Toolkit_v2.0.iso / HTML / archive / Unix / HOWTOs / DOS-TO-L < prev next >

Wrap

Text File | 1999-11-04 | 53KB | 1,981 lines

From DOS/Windows to Linux HOWTO By Guido Gonzato, guido@ibogfs.cineca.it v1.2.2, 31 October 1997 This HOWTO is dedicated to all the (soon to be former?) DOS and Win- dows users who have just taken the plunge and decided to switch to Linux, the free UNIX clone. Given the similarities between DOS and UNIX, the purpose of this document is to help the reader translate his or her knowledge of DOS and Windows into the Linux environment, so as to be productive ASAP. ______________________________________________________________________ Table of Contents 1. Introduction 1.1 Is Linux Right for You? 1.2 It Is. Tell Me More 1.3 For the Impatient 2. Files and Programs 2.1 Files: Preliminary Notions 2.2 Symbolic Links 2.3 Permissions and Ownership 2.4 Translating Commands from DOS to Linux 2.5 Running Programs: Multitasking and Sessions 2.6 Running Programs on Remote Computers 3. Using Directories 3.1 Directories: Preliminary Notions 3.2 Directories Permissions 3.3 Translating Commands from DOS to Linux 4. Floppies, Hard Disks, and the Like 4.1 Managing Devices 4.2 Backing Up 5. What About Windows? 6. Tailoring the System 6.1 System Initialisation Files 6.2 Program Initialisation Files 7. A Bit of Programming 7.1 Shell Scripts: .BAT Files on Steroids 7.2 C for Yourself 8. The Remaining 1% 8.1 Using tar & gzip 8.2 Installing Applications 8.3 Tips You Can't Do Without 8.4 Useful Programs and Commands 8.5 Common Extensions and Related Programs 9. The End, for Now 9.1 Copyright 9.2 Disclaimer ______________________________________________________________________ 1. Introduction 1.1. Is Linux Right for You? You want to switch from DOS/Windows to Linux? Good idea, but beware: it might not be useful for you. IMHO, there is no such thing as ``the best computer'' or ``the best operating system'': it depends on what one has to do. That's why I don't believe that Linux is the best solution for everyone, even if it's technically superior to many commercial OS's. You're going to benefit immensely from Linux if what you need is sw for programming, the Internet, TeX... technical sw in general, but if you mostly need commercial sw, or if you don't feel like learning and typing commands, look elsewhere. Linux is not (for now) as easy to use and configure as Windows or the Mac, so be prepared to hack quite a bit. In spite of these warnings, let me tell you that I'm 100% confident that if you belong to the right user type you'll find in Linux your computer Nirvana. It's up to you. And remember that Linux + DOS/Windows can coexist on the same machine, anyway. Prerequisites for this howto: I'll assume that o you know the basic DOS commands and concepts; o Linux, possibly with X Window System, is properly installed on your PC; o your shell---the equivalent of COMMAND.COM---is bash; o you understand that this guide is only an incomplete primer. For more information, please refer to Matt Welsh's ``Linux Installation and Getting Started'' and/or Larry Greenfield's ``Linux User Guide'' (sunsite.unc.edu:/pub/Linux/docs/LDP). This howto replaces the old ``From DOS to Linux --- Quick!'' mini- howto. Also note that, unless specified, all information in this work is aimed at bad ol' DOS. There's a section about Windows, but bear in mind that Windows and Linux are totally different, unlike DOS which is sort of a UNIX poor relation. 1.2. It Is. Tell Me More You installed Linux and the programs you needed on the PC. You gave yourself an account (if not, type adduser now!) and Linux is running. You've just entered your name and password, and now you are looking at the screen thinking: ``Well, now what?'' Now, don't despair. You're almost ready to do the same things you used to do with DOS, and many more. If you were running DOS instead of Linux, you would be doing some of the following tasks: o running programs and creating, copying, viewing, deleting, printing, renaming files; o CD'ing, MD'ing, RD'ing, and DIR'ring your directories; o formatting floppies and copying files from/to them; o mending your AUTOEXEC.BAT and CONFIG.SYS; o writing your own .BAT files and/or QBasic and/or C/Pascal programs; o the remaining 1%. You'll be glad to know that these tasks can be accomplished under Linux in a fashion similar to DOS. Under DOS, the average user uses very few of the 100+ commands available: the same, up to a point, holds for Linux. A few things to point out before going on: o first, how to get out. To quit Linux: if you see a text mode screen, press CTRL-ALT-DEL, wait for the system to fix its innards and tell you everything is OK, then switch off the PC. If you are working under X Window System, press CTRL-ALT-BACKSPACE first, then CTRL-ALT-DEL. Never switch off or reset the PC directly: this could damage the file system; o unlike DOS, Linux has built-in security mechanisms, due to its multiuser nature. Files and directories have permissions associated to them, and therefore some cannot be accessed by the normal user; (see Section ``Permissions''). Only the user whose login name is ``root'' has the power. (This guy's the system administrator. If you work on your own PC, you'll be root as well.) DOS, on the contrary, will let you wipe out the entire contents of your hard disk; o you are strongly encouraged to experiment, play, try by yourself: it surely won't hurt. If you need help, you can do the following: o to get some help about the ``internal commands'' of the shell, type help; o to get help on a command, type man command that invokes the manual (``man'') page pertinent to command. Alternatively, type info command that invokes, if available, the info page pertinent to command. Info is a hypertext-based documentation system, perhaps not intuitive to use at first. Finally, you may try apropos command or whatis command pressing then `q' to exit; o most of the power and flexibility of UNIX comes from the simple concepts of redirection and piping, more powerful than under DOS. Simple commands can be strung together to accomplish complex tasks. Do use these features! o conventions: <...> means something that must be specified, while [...] something optional. Example: $ tar -tf <file.tar> [> redir_file] file.tar must be indicated, but redirection to redir_file is optional. o from now on ``RMP'' means ``please read the man pages for further information''. 1.3. For the Impatient Want to strike out? Have a look at this: DOS Linux Notes ------------------------------------------------------------------------------ BACKUP tar -Mcvf device dir/ completely different CD dirname\ cd dirname/ almost the same syntax COPY file1 file2 cp file1 file2 ditto DEL file rm file beware - no undelete DELTREE dirname rm -R dirname/ ditto DIR ls not exactly the same syntax DIR file /S find . -name file completely different EDIT file vi file I think you won't like it emacs file this is better jstar file feels like dos' edit FORMAT fdformat, mount, umount quite different syntax HELP command man command same philosophy MD dirname mkdir dirname/ almost the same syntax MOVE file1 file2 mv file1 file2 ditto NUL /dev/null ditto PRINT file lpr file ditto PRN /dev/lp0, /dev/lp1 ditto RD dirname rmdir dirname/ almost the same syntax REN file1 file2 mv file1 file2 not for multiple files RESTORE tar -Mxpvf device different syntax TYPE file less file much better WIN startx poles apart! If you need more than a table of commands, please refer to the following sections. 2. Files and Programs 2.1. Files: Preliminary Notions Linux has a file system---meaning by that ``the structure of directories and files therein''---very similar to that of DOS. Files have filenames that obey special rules, are stored in directories, some are executable, and among these most have command switches. Moreover, you can use wildcard characters, redirection, and piping. There are only a few minor differences: o under DOS, file names are in the so-called 8.3 form; e.g. NOTENOUG.TXT. Under Linux we can do better. If you installed Linux using a file system like ext2 or umsdos, you can use longer filenames (up to 255 characters), and with more than one dot in them: for example, This_is.a.VERY_long.filename. Please note that I used both upper and lower case characters: in fact... o upper and lower case characters in file names or commands are different. Therefore, FILENAME.tar.gz and filename.tar.gz are two different files. ls is a command, LS is a mistake; o Windows 95 users will want to use long file names under Linux, of course. If a file name contains spaces (not recommended but possible), you must enclose the file in double quotes whenever your refer to it. For example: $ # the following command makes a directory called "My old files" $ mkdir "My old files" $ ls My old files bin tmp Some characters shouldn't but can be used: some are !*$&. I won't tell you how, though. o there are no compulsory extensions like .COM and ..EXE for programs, or .BAT for batch files. Executable files are marked by an asterisk '*' at the end of their name when you issue the ls -F command. For example: $ ls -F I_am_a_dir/ cindy.jpg cjpg* letter_to_Joe my_1st_script* old~ The files cjpg* and my_1st_script* are executable---``programs''. Under DOS, backup files end in .BAK, while under Linux they end with a tilde as hidden. Example: the file .I.am.a.hidden.file won't show up after the ls command; o DOS program switches are obtained with /switch, Linux switches with -switch or --switch. Example: dir /s becomes ls -R. Note that many DOS programs, like PKZIP or ARJ, use UNIX-style switches. You can now jump to Section ``Translating Commands from DOS to Linux'', but if I were you I'd read on. 2.2. Symbolic Links UNIX has a type of file that doesn't exist under DOS: the symbolic link. This can be thought of as a pointer to a file or to a directory, and can be used instead of the file or directory it points to; it's similar to Windows 95 shortcuts. Examples of symbolic links are /usr/X11, which points to /usr/X11R6; /dev/modem, which points to either /dev/cua0 or /dev/cua1. To make a symbolic link: $ ln -s <file_or_dir> <linkname> Example: $ ln -s /usr/doc/g77/DOC g77manual.txt Now you can refer to g77manual.txt instead of /usr/doc/g77/DOC. Links appear like this in directory listings: $ ls -F g77manual.txt@ $ ls -l (various things...) g77manual.txt -> /usr/doc/g77/DOC 2.3. Permissions and Ownership DOS files and directories have the following attributes: A (archive), H (hidden), R (read-only), and S (system). Only H and R make sense under Linux: hidden files start with a dot, and for the R attribute, read on. Under UNIX a file has ``permissions'' and an owner, who in turn belongs to a ``group''. Look at this example: $ ls -l /bin/ls -rwxr-xr-x 1 root bin 27281 Aug 15 1995 /bin/ls* The first field contains the permissions of the file /bin/ls, which belongs to root, group bin. Leaving the remaining information aside (Matt's book is there for that purpose), remember that -rwxr-xr-x means, from left to right: - is the file type (- = ordinary file, d = directory, l = link, etc); rwx are the permissions for the file owner (read, write, execute); r-x are the permissions for the group of the file owner (read, execute); (I won't cover the concept of group, you can survive without it as long as you're a beginner ;-) r-x are the permissions for all other users (read, execute). This is why you can't delete the file /bin/ls unless you are root: you don't have the write permission to do so. To change a file's permissions, the command is: $ chmod <whoXperm> <file> where who is u (user, that is owner), g (group), o (other), X is either + or -, perm is r (read), w (write), or x (execute). Examples: $ chmod u+x file this sets the execute permission for the file owner. Shortcut: chmod +x file. $ chmod go-wx file this removes write and execute permission for everyone but the owner. $ chmod ugo+rwx file this gives everyone read, write, and execute permission. # chmod +s file this makes a so-called ``setuid'' or ``suid'' file---a file that everyone can execute with its owner's privileges. Typically, you'll come across root suid files. A shorter way to refer to permissions is with numbers: rwxr-xr-x can be expressed as 755 (every letter corresponds to a bit: --- is 0, --x is 1, -w- is 2, -wx is 3...). It looks difficult, but with a bit of practice you'll understand the concept. root, being the so-called superuser, can change everyone's file permissions. There's more to it---RMP. 2.4. Translating Commands from DOS to Linux On the left, the DOS commands; on the right, their Linux counterpart. COPY: cp DEL: rm MOVE: mv REN: mv TYPE: more, less, cat Redirection and plumbing operators: < > >> | Wildcards: * ? nul: /dev/null prn, lpt1: /dev/lp0 or /dev/lp1; lpr - EXAMPLES - DOS Linux --------------------------------------------------------------------- C:\GUIDO>COPY JOE.TXT JOE.DOC $ cp joe.txt joe.doc C:\GUIDO>COPY *.* TOTAL $ cat * > total C:\GUIDO>COPY FRACTALS.DOC PRN $ lpr fractals.doc C:\GUIDO>DEL TEMP $ rm temp C:\GUIDO>DEL *.BAK $ rm *~ C:\GUIDO>MOVE PAPER.TXT TMP\ $ mv paper.txt tmp/ C:\GUIDO>REN PAPER.TXT PAPER.ASC $ mv paper.txt paper.asc C:\GUIDO>PRINT LETTER.TXT $ lpr letter.txt C:\GUIDO>TYPE LETTER.TXT $ more letter.txt C:\GUIDO>TYPE LETTER.TXT $ less letter.txt C:\GUIDO>TYPE LETTER.TXT > NUL $ cat letter.txt > /dev/null n/a $ more *.txt *.asc n/a $ cat section*.txt | less Notes: o * is smarter under Linux: * matches all files except the hidden ones; .* matches all hidden files; *.* matches only those that have a '.' in the middle, followed by other characters; p*r matches both `peter' and `piper'; *c* matches both `picked' and `peck'; o when using more, press SPACE to read through the file, `q' or CTRL- C to exit. less is more intuitive and lets you use the arrow keys; o there is no UNDELETE, so think twice before deleting anything; o in addition to DOS < > >>, Linux has 2> to redirect error messages (stderr); moreover, 2>&1 redirects stderr to stdout, while 1>&2 redirects stdout to stderr; o Linux has another wildcard: the []. Use: [abc]* matches files starting with a, b, c; *[I-N,1,2,3] matches files ending with I, J, K, L, M, N, 1, 2, 3; o there is no DOS-like RENAME; that is, mv *.xxx *.yyy won't work. You could try this simple script; see Section ``Shell Scripts'' for details. ___________________________________________________________________ #!/bin/sh # ren: rename multiple files according to several rules if [ $# -lt 3 ] ; then echo "usage: ren \"pattern\" \"replacement\" files..." exit 1 fi OLD=$1 ; NEW=$2 ; shift ; shift for file in $* do new=`echo ${file} | sed s/${OLD}/${NEW}/g` mv ${file} $new done ___________________________________________________________________ Beware: it doesn't behave like DOS REN, as it uses ``regular expres- sions'' that you still don't know. Shortly, if you simply want to change file extensions, use it as in: ren "htm$" "html" *htm. Don't forget the $ sign. o use cp -i and mv -i to be warned when a file is going to be overwritten. 2.5. Running Programs: Multitasking and Sessions To run a program, type its name as you would do under DOS. If the directory (Section ``Directories'') where the program is stored is included in the PATH (Section ``System Initialisation''), the program will start. Exception: unlike DOS, under Linux a program located in the current directory won't run unless the directory is included in the PATH. Escamotage: being prog your program, type ./prog. This is what the typical command line looks like: $ command -s1 -s2 ... -sn par1 par2 ... parn < input > output where -s1, ..., -sn are the program switches, par1, ..., parn are the program parameters. You can issue several commands on the command line: $ command1 ; command2 ; ... ; commandn That's all about running programs, but it's easy to go a step beyond. One of the main reasons for using Linux is that it is a multitasking os---it can run several programs (from now on, processes) at the same time. You can launch processes in background and continue working straight away. Moreover, Linux lets you have several sessions: it's like having many computers to work on at once! o To switch to session 1..6: $ ALT-F1 ... ALT-F6 o To start a new session without leaving the current one: $ su - <loginname> Example: $ su - root This is useful, for one, when you need to mount a disk (Section ``Floppies''): normally, only root can do that. o To end a session: $ exit If there are stopped jobs (see later), you'll be warned. o To launch a process in foreground: $ progname [-switches] [parameters] [< input] [> output] o To launch a process in background, add an ampersand '&' at the end of the command line: $ progname [-switches] [parameters] [< input] [> output] & [1] 123 the shell identifies the process with a job number (e.g. [1]; see below), and with a PID (123 in our example). o To see how many processes there are: $ ps -a This will output a list of currently running processes. o To kill a process: $ kill <PID> You may need to kill a process when you don't know how to quit it the right way... ;-). Sometimes, a process will only be killed by either of the following: $ kill -15 <PID> $ kill -9 <PID> In addition to this, the shell allows you to stop or temporarily sus- pend a process, send a process to background, and bring a process from background to foreground. In this context, processes are called ``jobs''. o To see how many jobs there are: $ jobs here jobs are identified by their job number, not by their PID. o To stop a process running in foreground (it won't always work): $ CTRL-C o To suspend a process running in foreground (ditto): $ CTRL-Z o To send a suspended process into background (it becomes a job): $ bg <job> o To bring a job to foreground: $ fg <job> o To kill a job: $ kill <%job> where <job> may be 1, 2, 3, ... Using these commands you can format a disk, zip a bunch of files, compile a program, and unzip an archive all at the same time, and still have the prompt at your disposal. Try this with DOS! And try with Windows, just to see the difference in performance. 2.6. Running Programs on Remote Computers To run a program on a remote machine whose IP address is remote.bigone.edu, you do: $ telnet remote.bigone.edu After logging in, start your favourite program. Needless to say, you must have an account on the remote machine. If you have X11, you can even run an X application on a remote computer, displaying it on your X screen. Let remote.bigone.edu be the remote X computer and local.linux.box be your Linux machine. To run from local.linux.box an X program that resides on remote.bigone.edu, do the following: o fire up X11, start an xterm or equivalent terminal emulator, then type: $ xhost +remote.bigone.edu $ telnet remote.bigone.edu o after logging in, type: remote:$ DISPLAY=local.linux.box:0.0 remote:$ progname & (instead of DISPLAY..., you may have to write setenv DISPLAY local.linux.box:0.0. It depends on the remote shell.) Et voila! Now progname will start on remote.bigone.edu and will be displayed on your machine. Don't try this over a ppp line though, for it's too slow to be usable. 3. Using Directories 3.1. Directories: Preliminary Notions We have seen the differences between files under DOS and Linux. As for directories, under DOS the root directory is \, under Linux / is. Similarly, nested directories are separated by \ under DOS, by / under Linux. Example of file paths: DOS: C:\PAPERS\GEOLOGY\MID_EOC.TEX Linux: /home/guido/papers/geology/mid_eocene.tex As usual, .. is the parent directory, . is the current directory. Remember that the system won't let you cd, rd, or md everywhere you want. Each user starts from his or her own directory called dir is /home/guido. 3.2. Directories Permissions Directories, too, have permissions. What we have seen in Section ``Permissions'' holds for directories as well (user, group, and other). For a directory, rx means you can cd to that directory, and w means that you can delete a file in the directory (according to the file's permissions, of course), or the directory itself. For example, to prevent other users from snooping in /home/guido/text: $ chmod o-rwx /home/guido/text 3.3. Translating Commands from DOS to Linux DIR: ls, find, du CD: cd, pwd MD: mkdir RD: rmdir DELTREE: rm -R MOVE: mv - EXAMPLES - DOS Linux --------------------------------------------------------------------- C:\GUIDO>DIR $ ls C:\GUIDO>DIR FILE.TXT $ ls file.txt C:\GUIDO>DIR *.H *.C $ ls *.h *.c C:\GUIDO>DIR/P $ ls | more C:\GUIDO>DIR/A $ ls -l C:\GUIDO>DIR *.TMP /S $ find / -name "*.tmp" C:\GUIDO>CD $ pwd n/a - see note $ cd ditto $ cd ~ ditto $ cd ~/temp C:\GUIDO>CD \OTHER $ cd /other C:\GUIDO>CD ..\TEMP\TRASH $ cd ../temp/trash C:\GUIDO>MD NEWPROGS $ mkdir newprogs C:\GUIDO>MOVE PROG .. $ mv prog .. C:\GUIDO>MD \PROGS\TURBO $ mkdir /progs/turbo C:\GUIDO>DELTREE TEMP\TRASH $ rm -R temp/trash C:\GUIDO>RD NEWPROGS $ rmdir newprogs C:\GUIDO>RD \PROGS\TURBO $ rmdir /progs/turbo Notes: 1. when using rmdir, the directory to remove must be empty. To delete a directory and all of its contents, use rm -R (at your own risk). 2. the character '~' is a shortcut for the name of your home directory. The commands cd or cd ~ will take you to your home directory from wherever you are; the command cd ~/tmp will take you to /home/your_home/tmp. 3. cd - ``undoes'' the last cd. 4. Floppies, Hard Disks, and the Like 4.1. Managing Devices You have never thought about it, but the DOS command FORMAT A: does a lot more work than it seems. In fact, when you issue the command FORMAT it will: 1) physically format the disk; 2) create the A:\ directory (= create a filesystem); 3) make the disk available to the user (= mount the disk). These three steps are addressed separately under Linux. You can use floppies in MS-DOS format, though other formats are available and are better---the MS-DOS format won't let you use long filenames. Here is how to prepare a disk (you'll need to start a session as root): o To format a standard 1.44 meg floppy disk (A:): # fdformat /dev/fd0H1440 o To create a filesystem: # mkfs -t ext2 -c /dev/fd0H1440 To create an MS-DOS filesystem, use msdos instead of ext2. Before using the disk, you must mount it. o To mount the disk: # mount -t ext2 /dev/fd0 /mnt or # mount -t msdos /dev/fd0 /mnt Now you can address the files in the floppy. When you've finished, before extracting the disk you must unmount it. o To unmount the disk: # umount /mnt Now you can extract the disk. Obviously, you have to fdformat and mkfs only unformatted disks, not previously used ones. If you want to use drive B:, refer to fd1H1440 and fd1 instead of fd0H1440 and fd0 in the examples above. All you used to do with A: or B: is now done using /mnt instead. Examples: DOS Linux --------------------------------------------------------------------- C:\GUIDO>DIR A: $ ls /mnt C:\GUIDO>COPY A:*.* $ cp /mnt/* /docs/temp C:\GUIDO>COPY *.ZIP A: $ cp *.zip /mnt/zip C:\GUIDO>A: $ cd /mnt A:>_ /mnt/$ _ If you don't like this mounting/unmounting thing, use the mtools suite: it's a set of commands that are perfectly equivalent to their DOS counterpart, but start with an `m': i.e., mformat, mdir, mdel, and so on. They can even preserve long file names, but not file permissions. Use these commands as you'd use the DOS commands and rest in peace. Needless to say, what holds for floppies also holds for other devices; for instance, you may want to mount another hard disk or a CD-ROM drive. Here's how to mount the CD-ROM: # mount -t iso9660 /dev/cdrom /mnt This was the ``official'' way to mount your disks, but there's a trick in store. Since it's a bit of a nuisance having to be root to mount a floppy or a CD-ROM, every user can be allowed to mount them this way: o as root, do the following: ~# mkdir /mnt/a: ; mkdir /mnt/a ; mkdir /mnt/cdrom ~# chmod 777 /mnt/a* /mnt/cd* ~# # make sure that the CD-ROM device is right ~# chmod 666 /dev/hdb ; chmod 666 /dev/fd* o add in /etc/fstab the following lines: /dev/cdrom /mnt/cdrom iso9660 ro,user,noauto 0 0 /dev/fd0 /mnt/a: msdos user,noauto 0 0 /dev/fd0 /mnt/a ext2 user,noauto 0 0 Now, to mount a DOS floppy, an ext2 floppy, and a CD-ROM: $ mount /mnt/a: $ mount /mnt/a $ mount /mnt/cdrom /mnt/a, /mnt/a:, and /mnt/cdrom can now be accessed by every user. Remember that allowing everyone to mount disks this way is a gaping security hole, if you care. 4.2. Backing Up Now that you know how to handle floppies etc., a couple of lines to see how to do your backup. There are several packages to help you, but the very least you can do for a multi-volume backup is (as root): # tar -M -cvf /dev/fd0H1440 dir_to_backup/ Make sure to have a formatted floppy in the drive, and several more ready. To restore your stuff, insert the first floppy in the drive and do: # tar -M -xpvf /dev/fd0H1440 5. What About Windows? The ``equivalent'' of Windows is the graphic system X11. Unlike Windows or the Mac, X11 wasn't designed for ease of use or to look good, but just to provide graphic facilities to UNIX workstations. These are the main differences: o while Windows looks and feels the same all over the world, X11 doesn't: it's much more configurable. X11's overall look is given by a key component called ``window manager''; there are many you can choose from. The most common are fvwm, basic but nice and memory efficient, fvwm2-95 and The Next Level that give X11 a Windows 95--like taste, plus several others. Some look really beautiful; o your window manager can be configured so as a window acts as in, er, Windows: you click on it and it comes to foreground. Another possibility is that it comes to foreground when the mouse is located on it. This feature (``focus'') and many others can be altered by editing one or more configuration files. Read the docs of your window manager; o X applications are written using special libraries (``widget sets''); as several are available, applications look different. The most basic ones are those that use the Athena widgets (2--D look; xdvi, xman, xcalc); others use Motif (netscape), others still use Tcl/Tk, XForms, Qt and what have you. Some---not all---of these libraries provide roughly the same look and feel as Windows; o so much for the look of X11, but what about the feel? Unfortunately, all applications behave differently. For instance, if you select a line of text using the mouse and press BACKSPACE, you'd expect the line to disappear, right? This doesn't work with Athena--based apps, but it does with Motif, Qt, and Tcl/Tk ones; o scrollbars, resizing, and iconisation: these, too, depend on the window manager and the widget set. Too many different things to mention here, just a couple of points. When using Athena--based apps the scrollbars are better moved with the central button. If you don't have a three--button mouse, try pressing the two buttons together; o applications don't have an icon by default, but they can have many. It depends on the window manager. The desktop is called ``root window'', and you can change its appearance with apps like xsetroot or xloadimage; o the clipboard can only contain text, and behaves strange. Once you've selected text, it's already copied to the clipboard: move elsewhere and press the central button. There's an application, xclipboard, that provides for multiple clipboard buffers; o drag and drop is an option, and is only available if you use X applications that support it. To save memory, it's better to use applications that use the same libraries, but this is difficult to do in practice. There's a project called the K Desktop Environment that aims at making X11 look and behave as coherently as Windows; it's currently in early beta stage but, believe me, it's awesome. It's going to put Windows' interface to shame. Point your browser to http://www.kde.org. 6. Tailoring the System 6.1. System Initialisation Files Two important files under DOS are AUTOEXEC.BAT and CONFIG.SYS, which are used at boot time to initialise the system, set some environment variables like PATH and FILES, and possibly launch a program or batch file. Under Linux there are several initialisation files, some of which you had better not tamper with until you know exactly what you are doing. I'll tell you what the most important are, anyway: FILES NOTES /etc/inittab don't touch for now! /etc/rc.d/* ditto If all you need is setting the $PATH and other environment variables, or you want to change the login messages or automatically launch a program after the login, have a look at the following files: FILES NOTES /etc/issue sets pre-login message /etc/motd sets post-login message /etc/profile sets $PATH and other variables, etc. /etc/bashrc sets aliases and functions, etc. /home/your_home/.bashrc sets your aliases + functions /home/your_home/.bash_profile or /home/your_home/.profile sets environment + starts your progs If the latter file exists (note that it is a hidden file), it will be read after the login and the commands in it will be executed. Example---look at this .bash_profile: ______________________________________________________________________ # I am a comment echo Environment: printenv | less # equivalent of command SET under DOS alias d='ls -l' # easy to understand what an alias is alias up='cd ..' echo "I remind you that the path is "$PATH echo "Today is `date`" # use the output of command 'date' echo "Have a good day, "$LOGNAME # The following is a "shell function" ctgz() # List the contents of a .tar.gz archive. { for file in $* do gzip -dc ${file} | tar tf - done } # end of .profile ______________________________________________________________________ $PATH and $LOGNAME, you guessed right, are environment variables. There are many others to play with; for instance, RMP for apps like less or bash. 6.2. Program Initialisation Files Under Linux, virtually everything can be tailored to your needs. Most programs have one or more initialisation files you can fiddle with, often as a .prognamerc in your home dir. The first ones you'll want to modify are: o .inputrc: used by bash to define keybindings; o .xinitrc: used by startx to initialise X Window System; o .fvwmrc: used by the window manager fvwm. A sample is in: /usr/lib/X11/fvwm/system.fvwmrc; o .Xdefault: used by rxvt, a terminal emulator for X, and other programs. For all of these and the others you'll come across sooner or later, RMP. 7. A Bit of Programming 7.1. Shell Scripts: .BAT Files on Steroids If you used .BAT files to create shortcuts of long command lines (I did a lot), this goal can be attained by inserting appropriate alias lines (see example above) in profile or .profile. But if your .BATs were more complicated, then you'll love the scripting language made available by the shell: it's as powerful as QBasic, if not more. It has variables, structures like while, for, case, if... then... else, and lots of other features: it can be a good alternative to a ``real'' programming language. To write a script---the equivalent of a .BAT file under DOS---all you have to do is write a standard ASCII file containing the instructions, save it, then make it executable with the command chmod +x <scriptfile>. To execute it, type its name. A word of warning. The system editor is called vi, and in my experience most new users find it very difficult to use. I'm not going to explain how to use it, because I don't like it and don't use it, so there. See Matt Welsh's ``Linux installation...'', pag. 109. (You had better get hold of another editor like joe, jed or emacs for X.) Suffice it here to say that: o to insert some text, type 'i' then your text; o to quit vi whithout saving, type ESC then :q! o to save and quit, type ESC then :wq Writing scripts under bash is such a vast subject it would require a book by itself, and I will not delve into the topic any further. I'll just give you an example of shell script, from which you can extract some basic rules: ______________________________________________________________________ #!/bin/sh # sample.sh # I am a comment # don't change the first line, it must be there echo "This system is: `uname -a`" # use the output of the command echo "My name is $0" # built-in variables echo "You gave me the following $# parameters: "$* echo "The first parameter is: "$1 echo -n "What's your name? " ; read your_name echo notice the difference: "hi $your_name" # quoting with " echo notice the difference: 'hi $your_name' # quoting with ' DIRS=0 ; FILES=0 for file in `ls .` ; do if [ -d ${file} ] ; then # if file is a directory DIRS=`expr $DIRS + 1` # DIRS = DIRS + 1 elif [ -f ${file} ] ; then FILES=`expr $FILES + 1` fi case ${file} in *.gif|*jpg) echo "${file}: graphic file" ;; *.txt|*.tex) echo "${file}: text file" ;; *.c|*.f|*.for) echo "${file}: source file" ;; *) echo "${file}: generic file" ;; esac done echo "there are ${DIRS} directories and ${FILES} files" ls | grep "ZxY--!!!WKW" if [ $? != 0 ] ; then # exit code of last command echo "ZxY--!!!WKW not found" fi echo "enough... type 'man bash' if you want more info." ______________________________________________________________________ 7.2. C for Yourself Under UNIX, the system language is C, love it or hate it. Scores of other languages (FORTRAN, Pascal, Lisp, Basic, Perl, awk...) are also available. Taken for granted that you know C, here are a couple of guidelines for those of you who have been spoilt by Turbo C++ or one of its DOS kin. Linux's C compiler is called gcc and lacks all the bells and whistles that usually accompany its DOS counterparts: no IDE, on-line help, integrated debugger, etc. It's just a rough command-line compiler, very powerful and efficient. To compile your standard hello.c you'll do: $ gcc hello.c which will create an executable file called a.out. To give the executable a different name, do $ gcc -o hola hello.c To link a library against a program, add the switch -l<libname>. For example, to link in the math library: $ gcc -o mathprog mathprog.c -lm (The -l<libname> switch forces gcc to link the library /usr/lib/lib<libname>.a; so -lm links /usr/lib/libm.a). So far, so good. But when your prog is made of several source files, you'll need to use the utility make. Let's suppose you have written an expression parser: its source file is called parser.c and #includes two header files, parser.h and xy.h. Then you want to use the routines in parser.c in a program, say, calc.c, which in turn #includes parser.h. What a mess! What do you have to do to compile calc.c? You'll have to write a so-called makefile, which teaches the compiler the dependencies between sources and objects files. In our example: ______________________________________________________________________ # This is makefile, used to compile calc.c # Press the <TAB> key at appropriate positions! calc: calc.o parser.o <TAB>gcc -o calc calc.o parser.o -lm # calc depends on two object files: calc.o and parser.o calc.o: calc.c parser.h <TAB>gcc -c calc.c # calc.o depends on two source files parser.o: parser.c parser.h xy.h <TAB>gcc -c parser.c # parser.o depends on three source files # end of makefile. ______________________________________________________________________ Save this file as makefile and type make to compile your program; alternatively, save it as calc.mak and type make -f calc.mak, and of course RMP. You can invoke some help about the C functions, that are covered by man pages, section 3; for example, $ man 3 printf There are lots of libraries available out there; among the first you'll want to use are ncurses, to handle textmode effects, and svgalib, to do graphics. If you feel brave enough to tackle X programming, get XForms ( ftp://bloch.phys.uwm.edu/pub/xforms) and/or one of the many libraries that make writing X programs a breeze. Have a look at http://www.xnet.com/~blatura/linapp6.html . Many editors can act as an IDE; emacs and jed, for instance, also feature syntax highlighting, automatic indent and so on. Alternatively, get the package rhide from sunsite.unc.edu:/pub/Linux/devel/debuggers/. It's a Borland IDE clone, and chances are that you'll like it. 8. The Remaining 1% 8.1. Using tar & gzip Under UNIX there are some widely used applications to archive and compress files. tar is used to make archives---it's like PKZIP but it doesn't compress, it only archives. To make a new archive: $ tar -cvf <archive_name.tar> <file> [file...] To extract files from an archive: $ tar -xpvf <archive_name.tar> [file...] To list the contents of an archive: $ tar -tf <archive_name.tar> | less You can compress files using compress, which is obsolete and shouldn't be used any more, or gzip: $ compress <file> $ gzip <file> that creates a compressed file with extension .Z (compress) or .gz (gzip). These programs can compress only one file at a time. To decompress, use: $ compress -d <file.Z> $ gzip -d <file.gz> RMP. The unarj, zip and unzip (PK??ZIP compatible) utilities are also available. Files with extension .tar.gz or .tgz (archived with tar, then compressed with gzip) are as common in the UNIX world as .ZIP files are under DOS. Here's how to list the contents of a .tar.gz archive: $ gzip -dc <file.tar.gz> | tar tf - | less or, equivalently, $ tar -ztf <file.tar.gz> | less 8.2. Installing Applications First of all: installing packages is root's work. Some Linux applications are distributed as .tar.gz or .tgz archives, specifically prepared so that they can be decompressed from / typing the following command: # gzip -dc <file.tar.gz> | tar xvf - or, equivalently, $ tar -zxf <file.tar.gz> The files will be decompressed in the right directory, which will be created on the fly. Users of the Slackware distribution have a user- friendly pkgtool program; another is rpm, which is available on all distributions thanks to Red Hat. Most programs shouldn't be installed from /; typically, the archive will contain a directory called pkgname/ and a lot of files and/or subdirectories under pkgname/. A good rule is to install those packages from /usr/local. Besides, some programs are distributed as C or C++ source files, which you'll have to compile to create the binaries. In most cases, all you have to do is issue make. Obviously, you'll need the gcc or g++ compiler. 8.3. Tips You Can't Do Without Command completion: pressing <TAB> when issuing a command will complete the command line for you. Example: you have to type gcc this_is_a_long_name.c; typing gcc thi<TAB> will suffice. (If you have other files that start with the same characters, supply enough characters to resolve any ambiguity.) Backscrolling: pressing SHIFT + PAG UP (the grey key) allows you to backscroll a few pages, depending on how much video memory you have. Resetting the screen: if you happen to more or cat a binary file, your screen may end up full of garbage. To fix things, blind type reset or this sequence of characters: echo CTRL-V ESC c RETURN. Pasting text: in console, see below; in X, click and drag to select the text in an xterm window, then click the middle button (or the two buttons together if you have a two-button mouse) to paste. There is also xclipboard (alas, only for text); don't get confused by its very slow response. Using the mouse: install gpm, a mouse driver for the console. Click and drag to select text, then right click to paste the selected text. It works across different VCs. Messages from the kernel: have a look at /var/adm/messages or /var/log/messages as root to see what the kernel has to tell you, including bootup messages. The command dmesg is also handy. 8.4. Useful Programs and Commands This list reflects my personal preferences and needs, of course. First of all, where to find them. Since you all know how to surf the Net and how to use archie and ftp, I'll just give you three of the most important addresses for Linux: ftp://sunsite.unc.edu, ftp://tsx-11.mit.edu, and ftp://nic.funet.fi. Please use your nearest mirror. o at allows you to run programs at a specified time; o awk is a simple yet powerful language to manipulate data files (and not only). For example, being data.dat your multi field data file, $ awk '$2 ~ "abc" {print $1, "\t", $4}' data.dat prints out fields 1 and 4 of every line in data.dat whose second field contains ``abc''. o cron is useful to perform tasks periodically, at specified date and time; o delete-undelete do what their name means; o df gives you info about all mounted disk(s); o dosemu allows you to run several (not all) DOS programs---including Windows 3.x, with a bit of hacking; o file <filename> tells you what filename is (ASCII text, executable, archive, etc.); o find (see also Section ``dir'') is one of the most powerful and useful commands. It's used to find files that match several characteristics and perform actions on them. General use of find is: $ find <directory> <expression> where <expression> includes search criteria and actions. Examples: $ find . -type l -exec ls -l {} \; finds all the files that are symbolic links and shows what they point to. $ find / -name "*.old" -ok rm {} \; finds all the files matching the pattern and deletes them, asking for your permission first. $ find . -perm +111 finds all the files whose permissions match 111 (executable). $ find . -user root finds all the files that belong to root. Lots of possibilities here---RMP. o gnuplot is a brilliant program for scientific plotting; o grep finds text patterns in files. For example, $ grep -l "geology" *.tex lists the files *.tex that contain the word ``geology''. The variant zgrep works on gzipped files. RMP; o tcx compresses executable binaries keeping them executable; o joe is an excellent editor. Invoking it by typing jstar you'll get the same key bindings as WordStar and its offspring, including DOS and Borland's Turbo languages editors; o less is probably the best text browser, and if properly configured lets you browse gzipped, tarred, and zipped files as well; o lpr <file> prints a file in background. To check the status of the printing queue, use lpq; to remove a file from the printing queue, use lprm; o mc is a great file manager; o pine is a nice e-mailing program; o script <script_file> copies to script_file what appears on screen until you issue the command exit. Useful for debugging; o sudo allows users to perform some of root's tasks (e.g. formatting and mounting disks; RMP); o uname -a gives you info about your system; o zcat and zless are useful for viewing gzipped text files without ungzipping them. Possible use: $ zless textfile.gz $ zcat textfile.gz | lpr o The following commands often come in handy: bc, cal, chsh, cmp, cut, fmt, head, hexdump, nl, passwd, printf, sort, split, strings, tac, tail, tee, touch, uniq, w, wall, wc, whereis, write, xargs, znew. RMP. 8.5. Common Extensions and Related Programs You may come across scores of file extensions. Excluding the more exotic ones (i.e. fonts, etc.), here's a list of who's what: o 1 ... 8: man pages. Get man. o arj: archive made with arj. unarj to unpack. o dvi: output file produced by TeX (see below). xdvi to visualise it; dvips to turn it into a PostScript .ps file. o gif: graphic file. Get seejpeg or xpaint. o gz: archive made with gzip. o info: info file (sort of alternative to man pages). Get info. o jpg, jpeg: graphic file. Get seejpeg. o lsm: Linux Software Map file. It's a plain ASCII file containing the description of a package. o ps: PostScript file. To visualise or print it get gs and, optionally, ghostview. o rpm: Red Hat package. You can install it on any system using the package manager rpm. o tgz, tar.gz: archive made with tar and compressed with gzip. o tex: text file to submit to TeX, a powerful typesetting program. Get the package tex, available in many distributions; but beware of NTeX, which has corrupted fonts and is included in some Slackware versions. o texi: texinfo file, can produce both TeX and info files (cp. info). Get texinfo. o xbm, xpm, xwd: graphic file. Get xpaint. o Z: archive made with compress. o zip: archive made with zip. Get zip and unzip. 9. The End, for Now Congratulations! You have now grasped a little bit of UNIX and are ready to start working. Remember that your knowledge of the system is still limited, and that you are expected to do more practice with Linux to use it comfortably. But if all you had to do was get a bunch of applications and start working with them, I bet that what I included here is enough. I'm sure you'll enjoy using Linux and will keep learning more about it---everybody does. I bet, too, that you'll never go back to DOS! I hope I made myself understood and did a good service to my 3 or 4 readers. 9.1. Copyright Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions. All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain conditions; please contact the Linux HOWTO coordinator at the address given below. In short, we wish to promote dissemination of this information through as many channels as possible. However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any plans to redistribute the HOWTOs. If you have questions, please contact Tim Bynum, the Linux HOWTO coordinator, at linux-howto@sunsite.unc.edu via email. 9.2. Disclaimer ``From DOS to Linux HOWTO'' was written by Guido Gonzato, guido@ibogfs.cineca.it. Many thanks to Matt Welsh, the author of ``Linux Installation and Getting Started'', to Ian Jackson, the author of ``Linux frequently asked questions with answers'', to Giuseppe Zanetti, the author of ``Linux'', to all the folks who emailed me suggestions, and especially to Linus Torvalds and GNU who gave us Linux. This document is provided ``as is''. I put great effort into writing it as accurately as I could, but you use the information contained in it at your own risk. In no event shall I be liable for any damages resulting from the use of this work. Feedback is welcome. For any requests, suggestions, flames, etc., feel free to contact me. Enjoy Linux and life, Guido =8-)