home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CP/M
/
CPM_CDROM.iso
/
mbug
/
mbug063.arc
/
CHAP14.TXT
< prev
next >
Wrap
Text File
|
1979-12-31
|
15KB
|
323 lines
Chapter 14 - Example Programs
WHY THIS CHAPTER?
Although every program in this tutorial has been a
complete program, each one has also been a very small
program intended to teach you some principle of programming
in C. It would do you a disservice to leave you at that
point without introducing you to a few larger programs to
illustrate how to put together the constructs you have
learned to create a major program. This chapter contains
four programs of increasing complexity, each designed to
take you into a higher plateau of programming, and each
designed to be useful to you in some way.
DOSEX will illustrate how to make DOS system calls and
will teach you, through self-study, how the system responds
to the keyboard. WHATNEXT reads commands input on the
command line and will aid you in setting up a variable batch
file, one that requests an operator input and responds to
the input by branching to a different part of the batch
file.
LIST is the source code for the program you used to
print out the C source files when you began studying C with
the aid of this tutorial. Finally we come to VC, the Visual
Calculator, which you should find to be a useful program
even if you don't study its source code. VC uses most of
the programming techniques we have studied in this course
and a few that we never even mentioned such as separately
compiled subroutines.
We will take a look at the example programs one at a
time but without a complete explanation of any of them
because you have been studying C for some time now and
should be able to read and understand most of these programs
on your own. One other thing must be mentioned, these
programs use lots of nonstandard constructs and you will
probably need to modify some of them to get them to compile
with your particular compiler. That will be left as an
exercise for you.
DOSEX.C - The DOS Example Program
The copy of DOS that you received with your IBM-PC or
compatible has about 50 internal DOS calls that you can use
as a programmer to control your peripheral devices and read
information or status from them. Some of the earlier IBM
DOS manuals, DOS 2.0 and earlier, have these calls listed in
the back of the manual along with how to use them. Most of
the manuals supplied with compatible computers make no
mention of these calls even though they are extremely
useful. These calls can be accessed from nearly any
Page 94
Chapter 14 - Example Programs
programming language but they do require some initial study
to learn how to use them. This program is intended to aid
you in this study.
Display the program on your monitor or print it out for
reference. It is merely a loop watching for a keyboard
input or a change in the time. If either happens, it reacts
accordingly. In line 23, the function "kbhit()" returns a
value of 1 if a key has been hit but not yet read from the
input buffer by the program. This is a nonstandard function
and may require a name change for your particular compiler.
There will probably be several similar calls that will need
changed for your compiler in order to compile and run the
programs in chapter 14.
Look at the function named "get_time" for an example of
a DOS call. An interrupt 21(hex) is called after setting
the AH register to 2C(hex) = 44(decimal). The time is
returned in the CH, CL, and DH registers. Refer to the DOS
call definitions in your copy of DOS. If the definitions
are not included there, Peter Nortons book, "Programmers
Guide to the IBM PC" is recommended as a good reference
manual for these calls and many other programming
techniques.
Another useful function is the "pos_cursor()" function
that positions the cursor anywhere on the monitor that you
desire by using a DOS interrupt. In this case, the
interrupt used is 10(hex) which is the general monitor
interrupt. This particular service is number 2 of about 10
different monitor services available. This particular
function may not be needed by your compiler because some
compilers have a cursor positioning function predefined for
your use. This function is included here as another example
to you.
The next function, service number 6 of interrupt
10(hex) is the window scroll service. It should be self
explanatory.
In this program, the cursor is positioned and some data
is output to the monitor, then the cursor is "hidden" by
moving it to line 26 which is not displayed. After you
compile and run the program, you will notice that the cursor
is not visible on the monitor. This is possible in any
program, but be sure to put the cursor in view before
returning to DOS because DOS does not like to have a
"hidden" cursor and may do some strange things.
Some time spent studying this program will be valuable
to you as it will reveal how the keyboard data is input to
Page 95
Chapter 14 - Example Programs
the computer. Especially of importance is how the special
keys such as function keys, arrows, etc. are handled.
WHATNEXT.C - The Batch File Interrogator
This is an example of how to read the data on the
command line following the function call. Notice that there
are two variables listed within the parentheses following
the main() call. The first variable is a count of words in
the entire command line including the command itself and the
second variable is a pointer to an array of pointers
defining the actual words on the command line.
First the question on the command line, made up of some
number of words, is displayed on the monitor and the program
waits for the operator to hit a key. If the key hit is one
of those in the last "word" of the group of words on the
command line, the number of the character within the group
is returned to the program where it can be tested with the
"errorlevel" command in the batch file. You could use this
technique to create a variable AUTOEXEC.BAT file or any
other batch file can use this for a many way branch.
Compile and run this file with TEST.BAT for an example of
how it works in practice. You may find this technique
useful in one of your batch files and you will almost
certainly need to read in the command line parameters
someday.
An interesting alternative would be for you to write a
program named "WOULD.C" that would return a 1 if a "Y" or
"y" were typed and a zero if any other key were hit. Then
your batch file could have a line such as;
WOULD YOU LIKE TO USE THE ALTERNATIVE METHOD (Y/N)
Dos would use "WOULD" as the program name, ignore the
rest of the statement except for displaying it on the
screen. You would then respond to the question on the
monitor with a single keyhit. Your batch file would then
respond to the 1 or 0 returned and either run the
alternative part of the batch file or the primary part
whatever each part was.
WOULD YOU LIKE PRIMARY (Y/N)
IF ERRORLEVEL 1 GOTO PRIMARY
(secondary commands)
GOTO DONE
:PRIMARY
(primary commands)
:DONE
Page 96
Chapter 14 - Example Programs
LIST.C - The Program Lister
This program is actually composed of two files, LIST.C
and LISTF.C that must be separately compiled and linked
together with your linker. There is nothing new here and
you should have no trouble compiling and linking this
program by reading the documentation supplied with your
compiler.
The only thing that is new in this program is the
inclusion of three "extern" variables in the LISTF.C
listing. The only purpose for this is to tie these global
variables to the main program and tell the compiler that
these are not new variables. The compiler will therefore
not generate any new storage space for them but simply use
their names during the compile process. At link time, the
linker will get their actual storage locations from the
LIST.OBJ file and use those locations for the variables in
the LISTF part of the memory map also. The variables of
those names in both files are therefore the same identical
variables and can be used just as any other global variables
could be used if both parts of the program were in one file.
There is no reason why the variables couldn't have been
defined in the LISTF.C part of the program and declared as
"extern" in the LIST.C part. Some of the variables could
have been defined in one and some in the other. It is
merely a matter of personal taste. Carried to an extreme,
all of the variables could have been defined in a third file
and named "extern" in both of these files. The third file
would then be compiled and included in the linking process.
It would be to your advantage to compile, link, and run
this program to prepare you for the next program which is
composed of 5 separate files which must all work together.
VC.C - The Visual Calculator
This program finally ties nearly everything together
because it uses nearly every concept covered in the entire
tutorial. It is so big that I will not even try to cover
the finer points of its operation. Only a few of the more
important points will be discussed.
The first thing you should do is go through the
tutorial for VC included in the file VC.DOC. There are
several dozen steps for you to execute, with each step
illustrating some aspect of the Visual Calculator. You will
get a good feel for what it is capable of doing and make
your study of the source code very profitable. In addition,
you will probably find many ways to use the Visual
Page 97
Chapter 14 - Example Programs
Calculator to solve problems involving calculations where
the simplicity of the problem at hand does not warrant
writing a program.
Notice that the structure definitions, used in all of
the separate parts of the program, are defined in the file
STRUCT.DEF. During program development, when it became
necessary to change one of the structures slightly, it was
not necessary to change it in all of the files, only one
file required modification which was then "included" in the
source files. Notice that the transcript data is stored in
a doubly linked list with the data itself being stored in a
separate dynamically allocated char string. This line is
pointed to by the pointer "lineloc".
For ease of development, the similar functions were
grouped together and compiled separately. Thus, all of the
functions involving the monitor were included in the file
named VIDEO.C, and all of the functions involving the data
storage were grouped into the FILE.C collection. Dividing
your program in a way similar to this should simplify
debugging and future modifications.
Of special interest is the "monitor()" function. This
function examines the video mode through use of a DOS
command and if it is a 7, it assumes it is a monochrome
monitor, otherwise it assumes a color monitor. The colors
of the various fields are established at this time and used
throughout the program. Most of the data is written
directly to the video memory, but some is written through
the standard BIOS routines.
The file DEFIN.C is simply a catalogue of the functions
to aid in finding the functions. This file was generated as
one of the first files and was maintained and updated for
use during the entire design and coding lifetime.
Feel free, after understanding this code, to modify it
in any way you desire for your own use.
Page 98