home *** CD-ROM | disk | FTP | other *** search
/ CP/M / CPM_CDROM.iso / lambda / soundpot / a / brad204a.lbr / BRAD2.DOC < prev    next >
Encoding:
Text File  |  1993-10-26  |  7.4 KB  |  176 lines

  1. --------------
  2.  
  3. FOR A FAST DEMO OF THE BRADFORD PRINTING PROGRAM:
  4.      A> BRADFORD MX BRADDEMO   (for Epson MX-compatible printers)
  5.      A> BRADFORD FX BRADDEMO   (for Epson FX-compatible printers)
  6.      A> BRADFORD ST BRADDEMO   (for Star Gemini-10x and 15x)
  7.  
  8. If you get a "not enough memory" message, use BF2TINY instead of
  9.   BRADFORD.
  10.  
  11. --------------
  12.  
  13. INTRODUCTION
  14. Greetings!  These are the instructions for version 2.0 of
  15. Bradford, the printing program.  Bradford prints WordStar and 
  16. ASCII files in very high quality, in a large variety of fonts
  17. (typestyles).  It also allows you to give commands, either on 
  18. the system command line or within your document, to control how 
  19. your document will be printed.
  20.  
  21. This version of Bradford is far more versatile, and often much 
  22. faster, than previous versions, so you might want to give it a 
  23. look even if you've tried an earlier version of Bradford.
  24.  
  25. SETTING UP
  26. Bradford works with three types of printers:
  27. Type MX -- compatible with the Epson MX-80 or IBM Graphics Printer.
  28. Type FX -- compatible with the Epson FX-80 or IBM Proprinter.
  29. Type ST -- Star Gemini-10x and compatibles
  30.  
  31. There are three "configuration files" on your disk, one for each 
  32. printer.  These files are called MX, FX, and ST.  There is also a 
  33. file called CONFIG.BF.  You must take these two steps before 
  34. using Bradford:
  35. 1) Rename the old CONFIG.BF to CONFIG.OLD
  36. 2) Rename your printer's configuration file to CONFIG.BF.
  37.  
  38. Now you are ready to use Bradford.  Use the command
  39.      A> bradford braddemo
  40. to print the demonstration file.  (Don't type the "A>".)
  41.  
  42. THE FONTS
  43. There are many files on your disk that end in ".BF2".  These are 
  44. the font files.  The part of the name before the ".BF2" is the 
  45. name of the font.  Bradford reads one of these files in order to 
  46. print in the corresponding font.
  47.  
  48. Notice that there's a font called "select".  Let's print the file 
  49. called ASCII in the "select" font.
  50.      A> bradford ascii .fnselect
  51. Notice that we included a special Bradford command on the command 
  52. line.  This told Bradford to read the new font before printing 
  53. our document.  Bradford has a very large number of commands that 
  54. can be used in this way.
  55.  
  56. PRINTING THIS FILE
  57. If you want to use Bradford to print this instruction file, use 
  58. this command at the system prompt:
  59.      A> bradford brad2.doc .mo1 .dcc
  60.  
  61. PRINTING WORDSTAR FILES
  62. Bradford has a special facility to print WordStar files.  Use
  63. this command to print a WordStar file:
  64.      A> bradford ws.bf myfile
  65. Substitute the name of your file for the word "myfile".
  66.  
  67. USING BRADFORD COMMANDS
  68. A command can be used in any of three ways:
  69. (1) Put it on the command line after the name of your document, 
  70. preceded by a period, as demonstrated above.
  71. (2) Include it in your document, on a line by itself, preceded by 
  72. a period.
  73. (3) Include it in your document, within a line of text, preceded 
  74. by a backslash (\) and followed by a space.
  75. The file BRADDEMO demonstrates methods (2) and (3) of using 
  76. commands.
  77.  
  78. PARTIAL LIST OF COMMANDS
  79. Here's a list of some of the commands available with Bradford.  
  80. If part of a command must be typed exactly as shown, we'll show 
  81. it in capital letters.  If you should substitute your own 
  82. information for part of a command, we'll show that part in lower-
  83. case letters.  Remember that comands must be put on the command 
  84. line preceded by a period, or in your document as described 
  85. above.  See the file BRADDEMO for some examples of how to use 
  86. commands.
  87.  
  88. FNfontname   Selects the specified font.
  89. POvalue      Sets the left margin to the specified value (0-79)
  90.              Normally 8
  91. MRvalue      Sets the right margin to the specified value (1-80)
  92.              Normally 73
  93. MTvalue      Sets top margin to specified value (0-65)
  94.              Normally 3
  95. MBvalue      Sets bottom margin to specified value (0-65)
  96.              Normally 8
  97. HMvalue      Sets horizontal magnification (width) (1-9)
  98.              Normally 2
  99. STL          Print the document flush-left
  100.              (This is the normal setting)
  101. STJA         Print the document justified.  (Must double space 
  102.              between paragraphs before using this.)
  103. STC          Print the document centered
  104. STR          Print the document flush-right
  105. PLvalue      Set page length in lines for odd-sized paper (1-254)
  106.              Normally 66
  107. MO1          Print in monospace instead of proportional space
  108. MO0          Resume proportional space printing
  109. UL1          Begin underlining 
  110. UL2          Begin double underlining
  111. UL0          Stop underlining  
  112. DK3          Begin boldface printing
  113. DK0          Resume non-boldface printing
  114. SUB          Begin subscript printing
  115. SUP          Begin superscript printing
  116. SU0          Resume mid-line (standard) printing
  117.  
  118. MORE ABILITIES
  119. If you decide that you wish to continue using Bradford after a 
  120. reasonable trial period, you are expected to "register" your copy 
  121. by purchasing a manual.  Additional features and abilities 
  122. explained in the manual include:  print multiple copies, print 
  123. selected range of pages, pause before each new page, high-speed 
  124. draft mode, change spacing between characters, headers and 
  125. footers, conditional and unconditional page breaks, a very 
  126. thorough system of macros, changing the command characters, 
  127. overstriking, custom configuration files, and page and chapter 
  128. numbering.
  129.  
  130. IF YOU WISH TO ORDER A MANUAL
  131. You can get the printed Bradford 2.0 manual (well over 50 pages 
  132. of text) for $25, which includes postage.  It's a very well 
  133. written manual, not full of hard-to-understand terminology.  Or 
  134. get both the latest manual and the latest version of the disk(s)
  135. for a total of $39.95.  Please send your check or money order
  136. (in U.S. dollars) to:
  137.      Concom Enterprises
  138.      Post Office Box 5056
  139.      Champaign, IL 61820, USA
  140. Add $3 for air mail outside North America.
  141. You may print the enclosed file "orderfrm.doc" for a convenient
  142. order form.
  143.  
  144. ANY QUESTIONS
  145. If Bradford seems to be severely malfunctioning, it's more likely
  146. a problem with my explanation than with the program.  Please let 
  147. me know if you can't get the program to work, and I will try to 
  148. solve your problem.  You may ask me questions by mail or on the 
  149. GEnie or CompuServe information services.  (My name is Aaron 
  150. Contorer, and you can look up my electronic mail address on-
  151. line.)
  152.  
  153. Technical support -- advice on how to get Bradford to do 
  154. something in particular -- will be given only to registered 
  155. Bradford 2.0 users (those who have purchased at least a manual).
  156.  
  157. BRADFORD 1 OWNERS
  158. If you have purchased the manual for Bradford 1.20 or earlier, 
  159. you are entitled to a $10 discount on one copy of Bradford 2 with 
  160. manual.  Just enclose the original title page of your old manual 
  161. with your order.  (Your order will also be checked against a 
  162. database of registered Bradford 1 users.)  Thank you for your 
  163. patronage; it is because of your support and kind correspondence 
  164. that I decided to do this whole thing again.
  165.  
  166. BRADFONT AND UNFONT
  167. These are programs for use in making your own font.  Use the command
  168.      A> unfont fontname
  169. to read the font file "fontname.bf2" and create the editable text file
  170. "fontname.bff".  You can then edit this file with a text editor, and
  171. turn it back into a font file with the command
  172.      A> bradfont fontname
  173. This process is explained in more detail in the manual.
  174.  
  175. gX    STRIPE2 BF2è│GΣ&ÇSMALCAP BF2╗│G╔&Ç