home *** CD-ROM | disk | FTP | other *** search
- TERMINAL CONFIGURATION PROGRAM
- ==============================
-
-
- Most terminals are capable of being altered to suit the needs or wishes of the
- user. This is the case as regards to the ZRT-80 terminal emulator card from
- Digital Research:Computers of Texas. This board is capable of emulating the
- products of several firms such as the Lear-Seigler ADM3A, the Heath19 (ASCII)
- as well as the BEEHIVE and ADDS 200. As the ADM3A and the H-19 are very much
- alike and have available to them more commands than the other two, they were
- the modes selected. Thus, it is possible to have graphics capability as well
- as an alternate character set if so desired.
-
- In order to realize some of these benefits, this small program was assembled
- to provide a quick means of changing some of the simpler parameters. A brief
- description of each command follows.
-
-
-
-
-
- COMMANDS
- ========
-
- B/OFF turns the bell off
- B/ON turns the bell on
-
- C/OFF turns the cursor off
- C/ON turns the cursor on
- C/BLOCK block cursor
- C/UNDER underline cursor
- C/PREF amber on black screen with a non-blinking underline cursor
- CBLK non-flashing block cursor
- CFBLK flashing block cursor
- CFUNDER flashing underline cursor
- CUNDER non-flashing underline cursor
-
- G/ON terminal enters graphics mode
- G/OFF terminal exits graphics mode
-
- SAB screen - amber on black
- SBA screen - black on amber ... not permanent
-
- S/OFF status line off
- S/ON status line on
-
- TTERM test terminal - fills screen with all possible characters in ROM
-
-
-
-
- Hope this helps you -- it sure helped me.
-
-
- London Little Board Bill Christian
- 8 December 1987 London Canada