CP/M/CPM_CDROM.iso/cpmhelp/cbas2.hlp

Text File | 1994-07-27 | 22KB | 633 lines

CBASIC in General
CBASIC2 Compile-Time Toggled Options
XREF Cross Reference Facility
Compiler Error Messages
Run-Time Error Messages -- Warnings
Run-Time Error Messages -- Error Codes
CBASIC2 Reserved Words
CBASIC2 Expression Hierarchy
CBASIC2 Predefined Functions
:CBASIC2:  CBASIC in General

     CBASIC  is  a compiler BASIC which may be executed on any floppy  disk
based  CP/M system having at least 20K bytes of memory.   In order to  make
the  best use of the power and flexibility of CBASIC,  a dual  floppy  disk
system  and at least 32K of memory is recommended.   If CBASIC is  executed
in a system smaller than 20K, a CP/M LOAD ERROR may occur.

     The CBASIC system consists of two programs -- CBASIC and CRUN.  CBASIC
is the compiler,  and CRUN is the run-time intepreter.  In a typical CBASIC
session,  the user will write the program using ED, compile it using CBASIC
(with the $B option to suppress listing), and run it using CRUN.

     Refer to the 84-page CBASIC manual --

                                C B A S I C
                          A Commercially Oriented
                        Compiler/Interpreter BASIC
                           Language Facility for
                               CP/M Systems

                             February 17, 1978

     CBASIC2 is an upward-compatable (in terms of source code) extension of
the  original CBASIC.   In addition to all of the features of the  original
CBASIC, CBASIC2 adds the following:
          1.  Integer variables
          2.  Chaining with common variables
          3.  Additional pre-defined functions
          4.  Cross Reference capability
     Note  that  CBASIC2 is upward-compatable with CBASIC only in terms  of
the source code files.   An INT file created under CBASIC will not  execute
with the Version 2 Run-Time Monitor (CRUN2).
     For further information, refer to the 100-page reference manual --

                                C B A S I C
                          A Commercially Oriented
                        Compiler/Interpreter BASIC
                           Language Facility for
                               CP/M Systems
                                 Version 2

                                May 1, 1979
:CBASIC2:  CBASIC2 Compile-Time Toggled Options

     Compiler  toggles  are a series of switches that can be set  when  the
compiler  is  executed.   The toggles are set by typing a  dollar-sign  ($)
followed  by  the letter designations of the desired toggles  starting  one
space or more after the program name on the command line.  Toggles may only
be set for the compiler.

     Examples of compiler toggles and invocation forms are --
          CBAS2 INVENTRY $BGF
          B:CBAS2 A:COMPARE $GEC
          CBAS2 PAYROLL $B
          CBAS2 B:VALIDATE $E

                          CBASIC Compiler Toggles

     TOGGLE B:  Suppresses the listing of the program on the console during
compilation.   If an error is detected,  the source line with the error and
the  error message will be printed even if Toggle B is set.   Toggle B does
not affect listing to the printer (Toggle F) or disk file (Toggle G).
     Toggle B is initially off.

     TOGGLE  C:   Suppresses the generation of an INT file.  Engaging  this
toggle  will  provide a syntax check without the overhead  of  writing  the
intermediate file.
     Toggle C is initially off.

     TOGGLE D:  Suppresses translation of lower-case letters to upper-case.
For example,  if Toggle D is on,  'AMT' will not refer to the same variable
as 'amt'.
     Toggle D is initially off.


     TOGGLE  E:  Causes the run-time program (CRUN2) to accompany any error
messages with the CBASIC line number in which the error occurred.  Toggle E
must be set in order for the TRACE option (see section 13.4 of the  manual)
to work.
     Toggle E is initially off.

     TOGGLE  F:   Causes the compiler output listing to be printed  on  the
LST: device in addition to the system console.
     Toggle F is initially off.

     TOGGLE  G:   Causes  the  compiler output listing  to  be  written  to
diskette.   The  file containing the compiler listing has the same name  as
the .BAS file, but its type is .LST.
     Normally  the disk listing will be placed on the same source drive  as
the  source file.   The operator may select another drive by specifying the
desired drive, enclosed in parens, following the G toggle; for example,
                            CBAS2 B:TAX $G(A:)
extracts the source from drive B: and sends the listing to drive A:.
     Toggle G is initially off.
:CBASIC2:  XREF Cross Reference Facility
     The  XREF.COM  Cross Reference utility program produces a  file  which
contains an alphabetized list of all identifiers used in a CBASIC  program.
The usage of the identifier (function,  parameter,  or global) is provided,
as well as a list of each line in which that identifier is used.   The file
created  has  the same name as the CBASIC source file and is of  type  XRF.
The standard output is 132 columns wide.
     The following command is used to invoke XREF --

             XREF <filename> [disk ref] [$<toggles>] ['title']

     If the disk reference is specified,  it instructs XREF as to what disk
to place the output on.
     The toggles are described on the next display.
     The  optional title field must be the last field in the command  line.
All characters following the first apostrophe on the command line up to the
second  apostrophe or until the end of the command line become  the  title.
The  title is truncated to 30 characters if the listing is 132 columns wide
and 20 characters if the D toggle (80 column listing) is specified.


                               XREF Toggles

     Toggle  A:  Causes the listing to be otput to the list device as  well
as the disk file.

     Toggle  B:   Suppresses output to the disk.   If only the B toggle  is
specified, no output is produced.

     Toggle  C:   Suppresses output to the disk and permits output  to  the
list device; same as A and B combined.

     Toggle  D:  Causes output to be 80 columns wide instead of 132.

     Toggle  E:  Produces output with only the identifiers and their usage.


     For example,  the following command produces a cross reference listing
on the list device which is 80 columns wide --

                               XREF PROG $CD
:CBASIC:  Compiler Error Messages

                               Text Messages

NO SOURCE FILE:  <FILENAME>.BAS
     The  compiler could not locate a source file used in either  a  CBASIC
command or an INCLUDE directive.

PROGRAM CONTAINS n UNMATCHED FOR STATEMENT(S)
     There are n FOR statements for which a NEXT could not be found.

PROGRAM CONTAINS n UNMATCHED WHILE STATEMENT(S)
     There are n WHILE statements for which a WEND could not be found.

WARNING:  INVALID CHARACTER IGNORED
     The previous line contains an invalid ASCII character;  this character
is ignored by the compiler, and a question mark is printed in its place.

OUT OF DISK SPACE
     The  compiler  has  run out of disk space while  attempting  to  write
either the INT or LST files.

                           Text Messages (Con't)

OUT OF DIRECTORY SPACE
     The  compiler  has run out of directory entries  while  attempting  to
create or extend a file.

DISK ERROR
     A disk error occurred while trying to read or write to a disk file.

INCLUDE NESTING TOO DEEP NEAR LINE n
     An  include  statement near line n in the source program  exceeds  the
maximum level of nesting of source files.


                           2-Letter Error Codes

BF -- Branch into Function
     A branch into a multiple line function from outside was attempted.

BN -- Bad Number
     An invalid numeric constant was encountered.

CE -- Close Error
     The intermediate (.INT) file could not be closed.

CI -- Close Include
     An invalid file name in an %INCLUDE statement.

CS -- COMMON Statement error
     A  COMMON statement which was not the first statement in  the  program
was detected.

CV -- COMMON Variable error
     An improper reference to a subscripte variable in a COMMON statement.

DE -- Disk Error
     A disk error occurred while trying to read the .BAS file.

DF -- Disk Full
     There  was no space on the disk or the disk directory was  full.   The
.INT file was not created.

DL -- Duplicate Line number
     The same line number was used on two different lines.   Other compiler
errors  may  cause a DL error message to be printed even if duplicate  line
numbers do not exist.

DP -- Defined Previously
     A variable in a DIM statement was previously defined.

EF -- Exponential Format
     A number in exponential format was input with no digits following  the
E.

FA -- Function Attribute
     A  function  name appears on the left side of an assignment  statement
but is not within that function.

FD -- Function Definition
     A function name that has been previously defined is being redefined in
a DEF statement.

FE -- FOR Error
     A  mixed mode expression exists in a FOR statement which the  compiler
cannot correct.

FI -- FOR Index
     An  expression which is not an unsubscripted numeric variable is being
used as a FOR loop index.

FN -- Function parameter Number
     A function reference contains an incorrect number of parameters.

FP -- Function Parameter type
     A function reference parameter type does not match the parameter  type
used in the function's DEF statement.

FU -- Function Undefined
     A function has been referenced before it has been defined.

IE -- IF Expression
     An  expression  used  immediately following an IF  evaluates  to  type
string.  Only type numeric is permitted.

IF -- In File
     A  variable  used  in a FILE statement is of type numeric  where  type
string is required.

IP -- Input Prompt
     An input prompt string is not surrounded by quotes.


IS -- Invalid Subscript
     A subscripted variable was referenced before it was dimensioned.

IT -- Invalid Toggle
     An invalid compiler directive was encountered.

IU -- Invalid Use
     A variable defined as an array is used with no subscripts.

MF -- Mixed Format
     An expression evaluates to type string when type numeric is required.

MM -- Mixed Mode
     Variables  of  type string and type numeric are combined in  the  same
expression.

MS -- Mixed String
     A numeric expression was used where a string expression is required.

ND -- No DEFFN
     A FEND statement was encountered without a corresponding DEF.

NI -- NEXT Index
     A variable referenced by a NEXT statement does not match the  variable
referenced by the associated FOR statement.

NU -- NEXT Unexpected
     A NEXT statement occurs without an associated FOR statement.

OF -- Out of Function
     A branch out of a multiple line function from inside the function  was
attempted.

OO -- ON Overflow
     More than 25 ON statements were used in the program.


PM -- ??
     A  DEF statement appeared within a multiple line function.   Functions
may not be nested.

SE -- Syntax Error
     The source line contains a syntax error.

SF -- SAVEMEM File
     A SAVEMEM statement uses an expression of type numeric to specify  the
file  to  be  loaded.   This expression must be  a  string.   Possibly  the
quotation marks were left off a string constant.

SN -- Subscript Number
     A subscripted variable contains an incorrect number of subscripts.

SO -- Syntax Overflow
     The  expression is too complex and should be simplified and placed  on
more than one line.

TO -- Table Overflow
     The  program  is  too  large for the  system.   The  program  must  be
simplified or the system size increased.

UL -- Undefined Line number
     A line number that does not exist has been referenced.

US -- Undefined String
     A string has been terminated by a carriage return rather than quotes.

VO -- Variable Overflow
     Variable names are too long for one statement.
     This should not occur.

WE -- WHILE Error
     The expression immediately following a WHILE statement is not numeric.

WU -- WHILE Undefined
     A WEND statement occurs without an associated WHILE statement.
:CBASIC:  Run-Time Error Messages -- Warnings

     Two textual run-time error messages are presented by CRUN:

NO INTERMEDIATE FILE
     A  file name was not specified with the CRUN command,  or no  file  of
type .INT and the specified file name was found on disk.

IMPROPER INPUT - REENTER
     This  message  occurs when the fields entered from the console do  not
match  the  field specified in the INPUT statement.   This can  occur  when
field types do not match or the number of fields entered is different  from
the  number  of  fields  specified.   All fields  specified  by  the  INPUT
statement must be reentered.

                     2-Letter Warning Codes

DZ -- Divide by Zero
     A number was divided by zero.   The result is set to the largest valid
CBASIC number.

FL -- Field Length
     A  field  length greater than 255 bytes was encountered during a  READ
LINE.  Only the first 255 characters of the record are retained.

LN -- Logarithm error
     The  argument  given in the LOG function was zero  or  negative.   The
value of the argument is returned.

NE -- NEgative number
     A  negative  number  was  specified following the  raise  to  a  power
operator (^).  The absolute value is used in the calculation.


OF -- OverFlow
     A calculation produced a number too large.   The result is set ot  the
largest valid CBASIC number.

SQ -- SQuare root error
     A  negative  number was specified in the SQR function.   The  absolute
value is used.
:CBASIC:  Run-Time Error Messages -- Error Codes

AC -- AsCii error
     The string used as the argument in an ASC function evaluated to a null
string.

BN -- BUFF Number
     The  value following the BUFF option in an OPEN or CREATE statement is
less than 1 or greater than 52.

CC -- Chain Code
     A  chained program's code area is larger than the main program's  code
area.

CD -- Chain Data
     A  chained program's data area is larger than the main program's  data
area.

CE -- Close Error
     An error occurred upon closing a file.

CF -- Chain Function
     A  chained program's constant area is larger than the  main  program's
constant area.

CP -- Chain Var Storage
     A  chained  program's  variable storage area is larger than  the  main
program's variable storage area.

CS -- Chain SAVEMEM
     A chained progra reserved a difference amount of memory with a SAVEMEM
statement than the main program.

CU -- Close Undefined file
     A close statement specified a file number that was not active.

DF -- Defined File
     An  OPEN or CREATE was specified with a file number that  was  already
active.

DU -- Delete Undefined file
     A DELETE statement specified a file number that was not active.

DW -- Disk Write error
     An  error occurred while writing to a file.   This occurs when  either
the directory or the disk is full.

EF -- End of File
     A  read  past the end of file occurred on a file for which no  IF  END
statement has been executed.

ER -- Error in Record
     An  attempt  was  made to write a record of length  greater  than  the
maximum  record  size specified in the associated  OPEN,  CREATE,  or  FILE
statement.

FR -- File Rename
     An attempt was made to rename a file to an existing file name.

FT -- File Toggle
     A FILE statement was executed when 20 files were already active.

FU -- File Undefined
     An attempt was made to read or write to a file that was not active.

IF -- Invalid File name
     A file name was invalid.

IR -- Invalid Record number
     A record number less than one was specified.

IV -- Invalid Version
     An  attempt  was made to execute an INT file created by  a  Version  1
Compiler.

IX -- ??
     A   FEND  statement  was  encountered  prior  to  executing  a  RETURN
statement.

LW -- Line Width
     A  line  width  less than 1 or greater than 133 was  specified  in  an
LPRINTER WIDTH statement.

ME -- MAKE Error
     An  error occurred while creating or extending a file because the disk
directory was full.

MP -- MATCH Parameter
     The third parameter in a MATCH function was zero or negative.

NF -- Number of FILE
     The file number specified was less than 1 or greater than 20.

NM -- No Memory
     There was insufficient memory to load the program.

NN -- No Number field
     An attempt was made to print a number with a PRINT USING statement but
there was not a numeric data field in the USING string.

NS -- No String field
     An attempt was made to print a string with a PRINT USING statement but
there was not a string field in the USING string.

OD -- Overflow Data
     A  READ  statement was executed with no DATA available.

OE -- OPEN Error
     An attempt was made to OPEN a file that didn't exist and for which  no
IF END statement had been previously executed.

OI -- ON Index
     The  expression  specified  in  an ON ...  GOSUB or  an  ON  ...  GOTO
statement  evaluated to a number less than 1 or greater than the number  of
line numbers contained in the statement.

OM -- Overflow Memory
     The program ran out of memory during execution.

QE -- Quote Error
     An attempt was made to PRINT to a file a string containing a quotation
mark.

RB -- Random BUFF
     Random  access was attempted to a file activated with the BUFF  option
specifying more than 1 buffer.

RE -- READ Error
     An attempt was made to read past the end of a record in a fixed file.

RG -- RETURN with no GOSUB
     A RETURN occurred for which there was no GOSUB.

RU -- Random Undefined
     A random read or print was attempted to other than a fixed file.

SB -- SuBscript
     An  array subscript was used which exceeded the boundaries  for  which
the array was defined.

SL -- String Length
     A concatenation operation resulted in a string of more than 255 bytes.

SO -- SAVEMEM
     The file specified in a SAVEMEM statement could not be located on  the
referenced disk.

SS -- SubString error
     The second parameter of a MID$ function was zero or negative.

TF -- Too many Files
     An attempt was made to have more than 20 active files simultaneously.

TL -- TAB Length
     A  TAB statement contained a parameter less than 1 or greater than the
current line width.

UN -- UNdefined edit string
     A PRINT USING statement was executed with a null edit string.

WR -- WRite error
     An  attempt was made to write to a file after it had  been  read,  but
before it had been read to the end of the file.
:CBASIC:  CBASIC Reserved Words

     ABS       AND       AS        ASC       ATN
     BUFF      CALL      CHAIN     CHR$      CLOSE
     COMMAND$  COMMON    CONCHAR%  CONSOLE   CONSTAT%
     COS       CREATE    DATA      DEF       DELETE
     DIM       ELSE      END       EQ        EXP
     FEND      FILE      FOR       FRE       GE
     GO        GOSUB     GOTO      GT        IF
     INITIALIZE INP      INPUT     INT       INT%
     LE        LEFT$     LEN       LET       LINE
     LOG       LPRINTER  LT        MATCH     MID$
     NE        NEXT      NOT       ON        OPEN
     OR        OUT       PEEK      POKE      POS
     PRINT     RANDOMIZE READ      RECL      RECS
     REM       REMARK    RENAME    RESTORE   RETURN
     RIGHT$    RND       SADD      SGN       SIN
     SIZE      SQR       STEP      STOP      STR$
     SUB       TAB       TAN       THEN      TO
     UCASE$    USING     VAL       WEND      WHILE
     WIDTH     XOR
:CBASIC2:  Expression Hierarchy

     The Hierarchy for expression evaluation is a follows --

          1.  nested parentheses ()
          2.  power operator ^
          3.  * /
          4.  + - concatenation[+] unary[+ -]
          5.  relational operators:
               < <= > >= = <> LT LE GT GE EQ NE
          6.  NOT
          7.  AND
          8.  OR XOR
:CBASIC2:  Predefined Functions

                               I/O Functions

CONSTAT%  - Returns the console status as an integer.   If ready, a logical
          TRUE is returned.

CONCHAR%  - Reads one character from the console device.



                        Machine-Language Functions

PEEK (<exp>)
          - Returns  the  contents  of  the memory location  given  by  the
          expression.

POKE <exp>, <exp>
          - Low-order eight bits of second expression are stored in  memory
          location selected by first expression.

CALL <exp>
          - CALL a machine language program at address specified.

SAVEMEM <constant>, <exp>
          - Reserve  <constant> number of bytes and load the file specified
by the string <exp> into the reserved area.

                             Numeric Functions

     FRE            ABS(x)         INT(x)         INT%(x)
     FLOAT(i%)      RND            SGN(x)         ATN(x)
     COS(x)         EXP(x)         LOG(x) [e]     SIN(x)
     SQR(x)         TAN(x)

                             String Functions

     ASC(a$)        CHR$(i%)       LEFT$(a$,i%)   LEN(a$)
     UCASE$(a$)     MATCH(a$,b$,i%) MID$(a$,i%,j%) RIGHT$(a$,i%)
     STR$(x)        VAL(a$)        COMMAND$       SADD(a$)


                              Disk Functions

     RENAME(a$,b$)  SIZE(a$)


                          User-Defined Functions

     The general forms are --

   [<line number>] DEF <function name> [<dummy arg list>] = <expression>

and

          [<line number>] DEF <function name> [<dummy arg list>]
                                     .
                                     .
                                     .
          [<line number>] FEND