home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Club Amiga de Montreal - CAM
/
CAM_CD_1.iso
/
files
/
037.lha
/
s
/
Help!
< prev
next >
Wrap
Text File
|
1987-05-16
|
9KB
|
141 lines
Uedit V2.1
Copyright (C) 1986-87, Rick Stiles
2420 Summit Springs Drive, Dunwoody, GA 30350
(S=Shift,A=Alt,C=Ctl,BS=BackSpace,KP=KeyPad)
*** See MENUS also ***
Click window's Title Bar to switch to Tiny Window.
(In Interlace, click and slide into Title Bar and release.)
-----------------------------------------------------------------------------
Amiga-esc: ABORT PROCESS | HELP: get/release Help
-----------------------------------------------------------------------------
LOAD/QUIT | C-mouse: click-load file "name"
closeBox,f4: quit gracefully | A-f4: Fast Quit - does NOT save files!
-----------------------------------------------------------------------------
SCROLLS
upArrow: scroll up line | downArrow: scroll down line
S-upArrow: scroll up 11 lines | S-downArrow: scroll down 11 lines
A-upArrow, gadget4: scroll up page | A-downArrow, gadget3: scroll down page
C-upArrow: scroll to start of file | C-downArrow: scroll to end of file
leftArrow: scroll left | rightArrow: scroll right
S-leftArrow: scroll left 10 chars | S-rightArrow: scroll right 10 chars
A-leftArrow: scroll left 20 chars | A-rightArrow: scroll right 20 chars
C-leftArrow: scroll to end of line | C-rightArrow: scroll to start of line
gadget1: next file | gadget2: prev file
-----------------------------------------------------------------------------
SCRATCH DELETES
C-d: delete line | KP0: undo scratch deletes
KP7: del word left | A-KP7: del to start of line
KP9: del word right | A-KP9: del to end of line
S-KP7: del char left | C-KP7: del to top of screen
S-KP9: del char right | C-KP9: del to bottom of screen
-----------------------------------------------------------------------------
CURSOR
button: deposit cursor | KP5: "find" cursor
C-KP8: move up a page | KP8: move cursor down line
C-KP2: move down a page | KP2: move cursor up line
KP4: move cursor left word | KP6: move cursor right word
S-KP4: move cursor left char | S-KP6: move cursor right char
A-KP4: move to start of line | A-KP6: move to end of line
C-KP4: move to start of line | C-KP6: move to end of line
-----------------------------------------------------------------------------
HILITE/INVERT | SAC-button: drag mouse to make hilite
KP1: start hilite at cursor | C-KP1: start invert at cursor
KP3: end hilite at cursor | C-KP3: end invert at cursor
S-button: start hilite | SC-button: start invert
A-button: end hilite | AC-button: end invert
-----------------------------------------------------------------------------
BUILDING INDEX
SA-buttonDown: click/ drag mouse, store word for index.
SA-buttonUp: used with SA-buttonDown to build index.
SA-i: Scan list in buf41, create index.
Document in window will be searched for the key words. When index has been
built, it will be in buffer 41. (ctl-w swaps current file with buf41.)
-----------------------------------------------------------------------------
SC-f5: speak messages AC-f5: speak alerts
S-f7: modify existing search text S-f8: modify existing replace text
S-del: insert a space for typing A-del: insert line below line
C-del: delete line above cursor line S-bs: open space in front of word
A-bs: open line above cur line C-bs: delete line below cursor line
S-tab: transparent tab fwd A-tab: transparent tab bkwd
C-tab: untab, del spaces to prev tab
A-c: trim spaces betw words C-c: input a Ctl-character
SA-c: count times next cmd executed
C-d: delete line
SA-d: input # tenths sec for delays A-d: delay # tenths
A-e: set new end-of-line value
A-f: free a buffer
A-l: shift hilite left by one space A-r: shift hilite right by one space
C-l: convert to lower case C-f: flip upper/lower case
C-u: convert to upper case C-x: toggle number hex/decimal
C-o: open line for typing C-j: join two lines together
A-0: line up columns A-2: center text in line
A-1: justify left A-5: justify right
A-4: match indent of prev line
A-6: store cursor line length in n45 A-7: store cursor col in n44
A-8: show value of n-variable A-9: set value of n-variable
C-n: go to line number A-3: go to page #
C-/: ASCII value of char C-0: zero running total
C-\: insert total at cursor C-=: add next word to running total
C--: subtract next word from running total
SAC-a: About... SAC-d: run demo
-----------------------------------------------------------------------------
LEARN MODE
C-s: start Learn Mode | C-s: abort Learn Mode
C-r: end Learn Mode | C-r: run Learned sequence
C-5: save Learn as numbered file | C-6: load Learn file #
| C-7: load & run Learn file #
((ctl-m sets the general purpose command-multiplier. Then ctl-r will run the
sequence as many times as the command-multiplier says to.))
-----------------------------------------------------------------------------
PRIMITIVE MODE
del: del char under cursor | BS: del char to left of cursor
S-space: move cursor forward | S-BS: move cursor backward.
esc: LEAVE Primitive Mode | S-esc: QUIT (only during startup-compile)
-----------------------------------------------------------------------------
STARTUP AUTO-COMMAND
Key SAC-z gets executed automatically at start-up. No command exists, unless
you define one. There are no restrictions on what this command can do:
1.) To auto-load your files next time, select "Make command" in the menu.
Then type in:
<shftAltCtl-z: LoadFile("myfile1") loadFile("myfile2") etc >
Select "Compile" (F6), then select "Save config" (A-F6).
They'll be loaded anytime you start Uedit. Auto-load them anytime, by
pressing SAC-z.
2.) To get rid of startup-command:
Select "Kill key" in the Commands menu. Then press SAC-z. If you press
the wrong key, select "Load config" and then select "Kill key" again.
If you pressed the right key, select "Save config".
-----------------------------------------------------------------------------
BUFFER CONVENTIONS: ("See buffers" shows you these, if they are not empty.)
buf50-54 = temporary purposes
buf49 = search string buf48 = replace string
buf47 = copied hilite buf46 = copied invert
buf45 = scratch deletes (for Undo) buf44 = edit-command buffer
buf43 = filenames buf42 = HELP
buf41 = used in swapBuf (ctl-w) buf40 = used for AmigaDOS command
buf39 = AmigaDOS result buf38 = directory name
buf37 = copied columnar data
You can change this convention by editing the Config! file.
-----------------------------------------------------------------------------
NUMBER CONVENTIONS: (These variables are used by certain commands. Press
alt-8 to see them. Press alt-9 to set any number to a value.)
n50-n54 = temporary purposes n49 = dollars in running total
n48 = cents in running total n47 = plus/minus flag
n46 = tenths of second to delay n45 = length cursor line (alt-6)
n44 = cursor column (alt-7)
-----------------------------------------------------------------------------
These keys are "borrowed" by other keys. Do not save the configuration if
you swap or kill any of them:
A-1 SA-1 A-6 A-7 A-g C-d
C-kpDot kp0 kp1 kp3 S-kp7 S-kp9
kpEnter kpMinus kpDot S-f1 f4 S-f4
S-f7 S-f8 f9 S-f9 f10 S-del
If you modify Config! or make your own config file, search on "runKey",
locate all keys it uses, and update this list.
-----------------------------------------------------------------------------