home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Windoware
/
WINDOWARE_1_6.iso
/
drivers
/
windmp
/
readme.txt
< prev
next >
Wrap
Text File
|
1991-10-31
|
2KB
|
72 lines
Installation instructions for Beta Panasonic printer drivers 15-Oct-1991
This disk contains the following files
UNIDRV.DLL
DMCOLOR.DLL
PANSON.INF
README.TXT
PANSON9.DRV
PANSON9.TXT
PANSON24.DRV
PANSON24.TXT
To install the drivers for Windows 3.0 you will need to modify your
setup.inf file to include the lines listed in the panson.inf file.
*** Note: Before you start to do the following steps outlined below,
copy your "setup.inf" file to a floppy or another
subdirectory just in case your first attempt to modify the
file does not work correctly for you.
To make these changes do the following.
1. Run NOTEPAD from within Windows.
2. Open the setup.inf file in the \windows\system directory.
3. Search to near the bottom of the file for the section titled [io.device]
4. Insert the lines for the panasonic printers from the
panson.inf file as follows.
[io.device]
; (printers, plotters, etc.)
; The filename is followed by
;
; -- the descriptive string which will appear in Control Panel and
; which will appear in WIN.INI
; -- 1 or 2 strings indicating the scaling for this device
;
; There may be more than one line for a driver, corresponding to different
; printers.
6:PANSON9.DRV, "Beta Panasonic KX-P1180", "167,120,72", "60,72,120"
6:PANSON9.DRV, "Beta Panasonic KX-P1695", "167,120,72", "60,72,120"
5:PANSON24.DRV,"Beta Panasonic KX-P1123", "167,120,72", "60,72,120"
5:PANSON24.DRV,"Beta Panasonic KX-P1124", "167,120,72", "60,72,120"
5:PANSON24.DRV,"Beta Panasonic KX-P1624", "167,120,72", "60,72,120"
5:TTY.DRV,"Generic / Text Only","DEVICESPECIFIC"
...
Add the following to the [io.dependent] section.
[io.dependent]
panson9.drv = 6:unidrv.dll, 6:dmcolor.dll
panson24.drv = 5:unidrv.dll, 6:dmcolor.dll
5. Exit NOTEPAD and save the changes to the setup.inf file.
6. Copy the UNIDRV.DLL and DMCOLOR.DLL files from this disk
to your \windows\system directory.
7. Run the Control Panel and install the new driver the same way you
installed other printer drivers.