home *** CD-ROM | disk | FTP | other *** search
- ( -1) entry not in queue
-
- ( -2) QType in vertical retrace queue isn't vType
-
- ( -3) core routine number out of range
-
- ( -4) unimplemented core routine
-
- ( -5)
-
- ( -6)
-
- ( -7)
-
- ( -8) no debugger installed to handle debugger command
-
- ( -9)
-
- ( -10)
-
- ( -11)
-
- ( -12)
-
- ( -13)
-
- ( -14)
-
- ( -15)
-
- ( -16)
-
- ( -17) driver can't respond to this Control call
-
- ( -18) driver can't respond to this Status call
-
- ( -19) driver can't respond to Read calls
-
- ( -20) driver can't respond to Write calls
-
- ( -21) driver ref number doesn't match unit table
-
- ( -22) driver ref number specifies NIL handle in unit table
-
- ( -23) requested r/w permission doesn't match driver's open permission
-
- ( -24)
-
- ( -25) tried to remove an open driver
-
- ( -26) couldn't find driver in resource file
-
- ( -27) IO call aborted by KillIO
-
- ( -28) driver isn't open
-
- ( -29) unit table has no more entries
-
- ( -30) dce extension error
-
- ( -31)
-
- ( -32)
-
- ( -33) directory full
-
- ( -34) disk full
-
- ( -35) no such volume
-
- ( -36) I/O error
-
- ( -37) bad file or volume name
-
- ( -38) file not open
-
- ( -39) end of file
-
- ( -40) tried to position to before start of file
-
- ( -41) insufficient memory for file operation
-
- ( -42) too many files open
-
- ( -43) file not found
-
- ( -44) volume write protected
-
- ( -45) file locked
-
- ( -46) volume locked
-
- ( -47) file busy or folder not empty
-
- ( -48) duplicate filename
-
- ( -49) file already open with with write permission
-
- ( -50) parameters specify non-existing volume and there's no default
-
- ( -51) reference number specifies nonexistent access path
-
- ( -52) get file position error
-
- ( -53) volume not on-line
-
- ( -54) attempt to open locked file for writing
-
- ( -55) volume already on-line
-
- ( -56) no such drive
-
- ( -57) not a Macintosh disk
-
- ( -58) volume belongs to an external file system
-
- ( -59) file system error during rename
-
- ( -60) bad master directory block
-
- ( -61) read/write permission doesn't allow writing
-
- ( -62)
-
- ( -63)
-
- ( -64) drive not installed
-
- ( -65) no disk in drive
-
- ( -66) disk is probably blank
-
- ( -67) couldn't find valid address mark
-
- ( -68) read-verify compare failed
-
- ( -69) bad address mark
-
- ( -70) bad address mark
-
- ( -71) couldn't find a data mark header
-
- ( -72) bad data mark
-
- ( -73) bad data mark
-
- ( -74) write underrun occurred
-
- ( -75) step handshake failed
-
- ( -76) can't find track 0
-
- ( -77) unable to initialize IWM disk controller
-
- ( -78) tried to read 2nd side on a 1-sided drive
-
- ( -79) unable to correctly adjust disk speed
-
- ( -80) track number wrong on address mark
-
- ( -81) can't find sector
-
- ( -82) can't find sector 0 after track format
-
- ( -83) can't get enough sync
-
- ( -84) track failed to verify
-
- ( -85) unable to read same clock value twice
-
- ( -86) time written did not verify
-
- ( -87) parameter ram written didn't read-verify
-
- ( -88) parameter ram uninitialized
-
- ( -89) SCC receiver error (framing, parity, OR)
-
- ( -90) Break received (SCC)
-
- ( -91) error in socket number
-
- ( -92) data length too big
-
- ( -93) no network bridge for non-local send
-
- ( -94) error in attaching/detaching protocol
-
- ( -95) excessive collisions on write
-
- ( -96)
-
- ( -97) driver Open error (port is in use)
-
- ( -98) driver Open error (port not configured)
-
- ( -99) operation on a read-only zone
-
- (-100) desk scrap isn't initialized
-
- (-101) no object of that type in scrap
-
- (-102) no object of that type in scrap
-
- (-103)
-
- (-104)
-
- (-105)
-
- (-106)
-
- (-107)
-
- (-108) not enough room in heap zone
-
- (-109) NIL master pointer
-
- (-110) address was odd, or out of range
-
- (-111) attempt to operate on a free block
-
- (-112) trying to purge a locked or non-purgeable block
-
- (-113) address in zone check failed
-
- (-114) Pointer Check failed
-
- (-115) Block Check failed
-
- (-116) Size Check failed
-
- (-117) trying to move a locked block
-
- (-118)
-
- (-119)
-
- (-120) directory not found
-
- (-121) too many working directories open
-
- (-122) attempted to move into offspring
-
- (-123) attempt to do HFS operation on MFS volume
-
- (-124) server volume has been disconnected
-
- (-125) insufficient memory to update a pixmap
-
- (-126) system error code for MBDF not found
-
- (-127) could not find HMenu's parent in MenuKey
-
- (-128)
-
- (-129)
-
- (-130)
-
- (-131)
-
- (-132)
-
- (-133)
-
- (-134)
-
- (-135)
-
- (-136)
-
- (-137)
-
- (-138)
-
- (-139)
-
- (-140)
-
- (-141)
-
- (-142)
-
- (-143)
-
- (-144)
-
- (-145)
-
- (-146)
-
- (-147)
-
- (-148)
-
- (-149)
-
- (-150) Color2Index failed to find an index
-
- (-151) failed to allocate memory for temporary structures
-
- (-152) failed to allocate memory for structure
-
- (-153) range error on colorTable request
-
- (-154) colorTable entry protection violation
-
- (-155) invalid type of graphics device
-
- (-156) invalid resolution for MakeITable
-
- (-157)
-
- (-158)
-
- (-159)
-
- (-160)
-
- (-161)
-
- (-162)
-
- (-163)
-
- (-164)
-
- (-165)
-
- (-166)
-
- (-167)
-
- (-168)
-
- (-169)
-
- (-170)
-
- (-171)
-
- (-172)
-
- (-173)
-
- (-174)
-
- (-175)
-
- (-176)
-
- (-177)
-
- (-178)
-
- (-179)
-
- (-180)
-
- (-181)
-
- (-182)
-
- (-183)
-
- (-184)
-
- (-185)
-
- (-186)
-
- (-187)
-
- (-188)
-
- (-189)
-
- (-190)
-
- (-191)
-
- (-192) resource not found
-
- (-193) resource file not found
-
- (-194) AddResource failed
-
- (-195) AddReference failed
-
- (-196) RmveResource failed
-
- (-197) RmveReference failed
-
- (-198) attribute inconsistent with operation
-
- (-199) map inconsistent with operation
-
- (-200)
-
-