home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Micro Dingo 7
/
cd.iso
/
Club-internet
/
Installation
/
Modems
/
Zyxel
/
MDMZC36Z.INF
< prev
next >
Wrap
INI File
|
1998-01-09
|
29KB
|
433 lines
; Windows Modem Setup File
; Copyright 1997 Microsoft Corp.
; Manufacturer: ZyXEL Communications Corp.
[Version]
; created on 01/09/98 by Manfred Recla <support@zyxel.co.at>
; for ZyXEL Comet 336z Fax+Modem+Voice, v1.12
; using the Rockwell chipset: 'RCV336ACF/SVD' (code: R6760-21)
; with enhanced voice support for Windows98 and WindowsNT 5.0
; based on MS-MDK v1.40 (MDK140.DOC & REG140.DOC, December 1997)
;LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg%
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
[Strings]
Mfg = "ZyXEL Communications Corp."
ZC336Z = "ZyXEL Comet 336z Modem+Fax+Voice"
ZC336Z.PnP = "ZyXEL Comet 336z Modem+Fax+Voice, Plug&Play"
[ZC336Z.NoResDup]
UNIMODEMAEB62912
[ControlFlags]
ExcludeFromSelect=SERENUM\ZYX0300
[Manufacturer]
%Mfg% = ZyXEL
[ZyXEL]
%ZC336Z% = ZC336Z, UNIMODEMAEB62912
%ZC336Z.PnP% = ZC336Z, SERENUM\ZYX0300
[ZC336Z]
AddReg=AllMfg.AddReg, ZC336Z.Data, ZC336Z.Voice, ZC336Z.Fax, EXTERNAL
[ZC336Z.Data]
HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, 5a,00,00,00, 07,00,00,00, 0f,00,00,00, 77,07,00,00, 00,c2,01,00, 40,83,00,00
HKR, Settings, Blind_Off,, "X7"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, Compression_Off,, "&K3"
HKR, Settings, Compression_On,, "&K4"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, ErrorControl_Off,, "&K0"
HKR, Settings, ErrorControl_On,, "&K3"
HKR, Settings, ErrorControl_Forced,, "*E1"
HKR, Settings, FlowControl_Off,, "&H0"
HKR, Settings, FlowControl_Hard,, "&H3"
HKR, Settings, FlowControl_Soft,, "&H4"
HKR, Settings, InactivityTimeout,, "S30=<#>"
HKR, Settings, Modulation_CCITT,, "B0"
HKR, Settings, Modulation_CCITT_V23,, "&N12"
HKR, Settings, Modulation_Bell,, "B1"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Pulse,, "P"
HKR, Settings, SpeakerVolume_Low,, "L1"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, Tone,, "T"
[EXTERNAL]
HKR,, DeviceType, 1, 01
[ZC336Z.Fax]
HKR, Fax\Class1\AdaptiveAnswer,SetupCommand,, "AT+FAE=1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 1,, "AT&FE0V1Q0S0=0"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 2,, "ATS7=60L0M1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 3,, "AT+FAE=1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 4,, "ATA"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseFaxDetect,, "FAX"
HKR, Fax\Class1\AdaptiveAnswer,SerialSpeedFaxDetect,, "19200"
HKR, Fax\Class1\AdaptiveAnswer,HostCommandFaxDetect,, "ATO"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseFaxConnect,, "CONNECT"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseDataDetect,, "DATA"
HKR, Fax\Class1\AdaptiveAnswer,SerialSpeedDataDetect,, "19200"
HKR, Fax\Class1\AdaptiveAnswer,HostCommandDataDetect,, "ATO"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseDataConnect,, "CONNECT"
;HKR, Fax, ExitCommand,, ""
;HKR, Fax, PreAnswerCommand,, ""
;HKR, Fax, PreDialCommand,, ""
;HKR, Fax, ResetCommand,, ""
;HKR, Fax, SetupCommand,, ""
;HKR, Fax, EnableV17Recv,, "1"
;HKR, Fax, EnableV17Send,, "1"
;HKR, Fax, FixModemClass,, "1"
;HKR, Fax, FixSerialSpeed,, "19200"
;HKR, Fax, HighestSendSpeed,, "14400"
;HKR, Fax, LowestSendSpeed,, "2400"
;HKR, Fax, HardwareFlowControl,, "1"
;HKR, Fax, SerialSpeedInit,, "57600"
;HKR, Fax, Cl1DontSync,, "1"
;HKR, Fax, Cl1FCS,, "0"
;HKR, Fax, Class1DTESpeed,, "AUTO"
;HKR, Fax, Class1FlowHW,, "+FLO=2"
;HKR, Fax, Class1FlowOff,, "+FLO=0"
;HKR, Fax, Class1FlowSW,, "+FLO=1"
;HKR, Fax, AnswerMode,, "2"
;HKR, Fax, BlindDial,, "2"
;HKR, Fax, CommaDelay,, "2"
;HKR, Fax, CopyQualityCheckLevel,, "1"
;HKR, Fax, DialToneWait,, "30"
;HKR, Fax, DisableG3ECM,, "1"
;HKR, Fax, DisableMRRecv,, "1"
;HKR, Fax, DisableMRSend,, "1"
;HKR, Fax, DontPurge,, "0"
;HKR, Fax, HangupDelay,, "60"
;HKR, Fax, ModemFaxClasses,, "14"
;HKR, Fax, ModemIdCmd,, "ATI1"
;HKR, Fax, NumRings,, "2"
;HKR, Fax, SpeakerMode,, "1"
;HKR, Fax, Volume,, "2"
[ZC336Z.Voice]
HKR,,Enumerator,,serwave.vxd
HKR,,VoiceProfile, 1, 27,22,09,02
; ------- start section for NT5 voice support --------------
; see REG140.DOC for details on next NT5 voice section.
HKR, WaveDriver, BaudRate, 1, 00,c2,01,00
HKR, WaveDriver, XformID, 1, 01,00
HKR, WaveDriver, WaveDevices, 1, 02,00
HKR, WaveDriver, XformModule, ,"umdmxfrm.dll"
HKR, WaveDriver, WaveHardwareID, ,"RockwellADPCMVoiceModemWave"
; ------- end section for NT5 voice support --------------
; since mixer enabled in voiceprofile next (3) keys must be present
;HKR,, VoiceMixerMid, 1,16,00
;HKR,, VoiceMixerPid, 1,15,00
;HKR,, VoiceMixerLineID, 1,00,00,04,00
; speakerphone settings, next section:
HKR,, SpeakerPhoneSpecs, 1, 08,00,00,00, 0f,00,00,00, 01,00,00,00, 00,00,00,00
HKR, SpeakerPhoneEnable, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneEnable, 2,, "at#cls=8<cr>"
HKR, SpeakerPhoneEnable, 3,, "at#spk=1,8,1<cr>"
HKR, SpeakerPhoneDisable, 1,, "at#spk=0,16,,<cr>"
HKR, SpeakerPhoneDisable, 2,, "at#vls=0<cr>"
HKR, SpeakerPhoneMute, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneMute, 2,, "at#spk=0,,,<cr>"
HKR, SpeakerPhoneUnMute, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneUnMute, 2,, "at#spk=1,,,<cr>"
HKR, SpeakerPhoneSetVolumeGain, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneSetVolumeGain, 2,, "at#spk=,<Vol>,<Gain><cr>"
; handset settings, next section:
HKR,, HandsetCloseDelay, 1,1e,00,00,00
HKR, HandsetSetRecordFormat, 1,,"at#vsr=7200<cr>"
HKR, HandsetSetRecordFormat, 2,,"at#vbs=4<cr>"
HKR, HandsetSetPlayFormat, 1,,"at#vsr=7200<cr>"
HKR, HandsetSetPlayFormat, 2,,"at#vbs=4<cr>"
HKR, OpenHandset, 1,, "at#cls=8<cr>"
HKR, OpenHandset, 2,, "at#vls=1<cr>"
HKR, CloseHandset, 1,, "at#vls=