home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fresh Fish 8
/
FreshFishVol8-CD1.bin
/
gnu
/
os-include
/
libraries
/
configregs.i
< prev
next >
Wrap
Text File
|
1993-10-15
|
9KB
|
245 lines
IFND LIBRARIES_CONFIGREGS_I
LIBRARIES_CONFIGREGS_I SET 1
**
** $VER: configregs.i 36.11 (3.11.90)
** Includes Release 40.15
**
** AutoConfig (tm) hardware register and bit definitions
**
** (C) Copyright 1985-1993 Commodore-Amiga, Inc.
** All Rights Reserved
**
IFND EXEC_TYPES_I
INCLUDE "exec/types.i"
ENDC ;EXEC_TYPES_I
**
** AutoConfig (tm) boards each contain a 32 byte "ExpansionRom" area that is
** read by the system software at configuration time. Configuration of each
** board starts when the ConfigIn* signal is passed from the previous board
** (or from the system for the first board). Each board will present it's
** ExpansionRom structure at location $00E80000 to be read by the system.
** This file defines the appearance of the ExpansionRom area.
**
** Expansion boards are actually organized such that only one nybble per
** 16 bit word contains valid information. The low nybbles of each
** word are combined to fill the structure below. (This table is structured
** as LOGICAL information. This means that it never corresponds exactly
** with a physical implementation.)
**
** The ExpansionRom space is further split into two regions: The first 16
** bytes are read-only. Except for the er_type field, this area is inverted
** by the system software when read in. The second 16 bytes contain the
** control portion, where all read/write registers are located.
**
** The system builds one "ConfigDev" structure for each board found. The
** list of boards can be examined using the expansion.library/FindConfigDev
** function.
**
** A special "hacker" Manufacturer ID number is reserved for test use:
** 2011 ($7DB). When inverted this will look like $F824.
**
STRUCTURE ExpansionRom,0 ;-First 16 bytes of the expansion ROM
UBYTE er_Type ;Board type, size and flags
UBYTE er_Product ;Product number, assigned by manufacturer
UBYTE er_Flags ;Flags
UBYTE er_Reserved03 ;Must be zero ($ff inverted)
UWORD er_Manufacturer ;Unique ID,ASSIGNED BY COMMODORE-AMIGA!
ULONG er_SerialNumber ;Available for use by manufacturer
UWORD er_InitDiagVec ;Offset to optional "DiagArea" structure
UBYTE er_Reserved0c
UBYTE er_Reserved0d
UBYTE er_Reserved0e
UBYTE er_Reserved0f
LABEL ExpansionRom_SIZEOF
**
** Note that use of the ec_BaseAddress register is tricky. The system
** will actually write twice. First the low order nybble is written
** to the ec_BaseAddress register+2 (D15-D12). Then the entire byte is
** written to ec_BaseAddress (D15-D8). This allows writing of a byte-wide
** address to nybble size registers.
**
STRUCTURE ExpansionControl,0 ;-Second 16 bytes of the expansion ROM
UBYTE ec_Interrupt ;Optional interrupt control register
UBYTE ec_Z3_HighBase ;Zorro III : Bits 24-31 of config address
UBYTE ec_BaseAddress ;Zorro II/III: Bits 16-23 of config address
UBYTE ec_Shutup ;The system writes here to shut up a board
UBYTE ec_Reserved14
UBYTE ec_Reserved15
UBYTE ec_Reserved16
UBYTE ec_Reserved17
UBYTE ec_Reserved18
UBYTE ec_Reserved19
UBYTE ec_Reserved1a
UBYTE ec_Reserved1b
UBYTE ec_Reserved1c
UBYTE ec_Reserved1d
UBYTE ec_Reserved1e
UBYTE ec_Reserved1f
LABEL ExpansionControl_SIZEOF
**
** many of the constants below consist of a triplet of equivalent
** definitions: xxMASK is a bit mask of those bits that matter.
** xxBIT is the starting bit number of the field. xxSIZE is the
** number of bits that make up the definition. This method is
** used when the field is larger than one bit.
**
** If the field is only one bit wide then the xxB_xx and xxF_xx convention
** is used (xxB_xx is the bit number, and xxF_xx is mask of the bit).
**
** manifest constants **
E_SLOTSIZE EQU $10000
E_SLOTMASK EQU $ffff
E_SLOTSHIFT EQU 16
** these define the free regions of Zorro memory space.
** THESE MAY WELL CHANGE FOR FUTURE PRODUCTS!
E_EXPANSIONBASE EQU $00e80000 ;Zorro II config address
EZ3_EXPANSIONBASE EQU $ff000000 ;Zorro III config address
E_EXPANSIONSIZE EQU $00080000 ;Zorro II I/O type cards
E_EXPANSIONSLOTS EQU 8
E_MEMORYBASE EQU $00200000 ;Zorro II 8MB space
E_MEMORYSIZE EQU $00800000
E_MEMORYSLOTS EQU 128
EZ3_CONFIGAREA EQU $40000000 ;Zorro III space
EZ3_CONFIGAREAEND EQU $7FFFFFFF ;Zorro III space
EZ3_SIZEGRANULARITY EQU $00080000 ;512K increments
***** er_Type definitions (ttldcmmm) ****************************************
** er_Type board type bits -- the OS ignores "old style" boards **
ERT_TYPEMASK EQU $c0 ;Bits 7-6
ERT_TYPEBIT EQU 6
ERT_TYPESIZE EQU 2
ERT_NEWBOARD EQU $c0
ERT_ZORROII EQU ERT_NEWBOARD
ERT_ZORROIII EQU $80
** other bits defined in er_Type **
BITDEF ERT,MEMLIST,5 ; Link RAM into free memory list
BITDEF ERT,DIAGVALID,4 ; ROM vector is valid
BITDEF ERT,CHAINEDCONFIG,3 ; Next config is part of the same card
** er_Type field memory size bits **
ERT_MEMMASK EQU $07 ;Bits 2-0
ERT_MEMBIT EQU 0
ERT_MEMSIZE EQU 3
***** er_Flags byte -- for those things that didn't fit into the type byte ****
***** the hardware stores this byte in inverted form ****
BITDEF ERF,MEMSPACE,7 ; Wants to be in 8 meg space.
; (NOT IMPLEMENTED)
BITDEF ERF,NOSHUTUP,6 ; Board can't be shut up.
BITDEF ERF,EXTENDED,5 ; Zorro III: Use extended size table
; for bits 0-2 of er_Type.
; Zorro II : Must be 0
BITDEF ERF,ZORRO_III,4 ; Zorro III: must be 1
; Zorro II : must be 0
ERT_Z3_SSMASK EQU $0F ; Bits 3-0. Zorro III Sub-Size. How
ERT_Z3_SSBIT EQU 0 ; much space the card actually uses
ERT_Z3_SSSIZE EQU 4 ; (regardless of config granularity)
; Zorro II : must be 0
** ec_Interrupt register (unused) *********************************************
BITDEF ECI,INTENA,1
BITDEF ECI,RESET,3
BITDEF ECI,INT2PEND,4
BITDEF ECI,INT6PEND,5
BITDEF ECI,INT7PEND,6
BITDEF ECI,INTERRUPTING,7
**************************************************************************
**
** these are the specifications for the diagnostic area. If the Diagnostic
** Address Valid bit is set in the Board Type byte (the first byte in
** expansion space) then the Diag Init vector contains a valid offset.
**
** The Diag Init vector is actually a word offset from the base of the
** board. The resulting address points to the base of the DiagArea
** structure. The structure may be physically implemented either four,
** eight, or sixteen bits wide. The code will be copied out into
** ram first before being called.
**
** The da_Size field, and both code offsets (da_DiagPoint and da_BootPoint)
** are offsets from the diag area AFTER it has been copied into ram, and
** "de-nybbleized" (if needed). (In other words, the byte size is the size of
** the actual information, not how much address space is required to
** store it.)
**
** All bits are encoded with uninverted logic (e.g. 5 volts on the bus
** is a logic one).
**
** If your board is to make use of the boot facility then it must leave
** its config area available even after it has been configured. Your
** boot vector will be called AFTER your board's final address has been
** set.
**
**************************************************************************
STRUCTURE DiagArea,0
UBYTE da_Config ; see below for definitions
UBYTE da_Flags ; see below for definitions
UWORD da_Size ; the size (in bytes) of the total diag area
UWORD da_DiagPoint ; where to start for diagnostics, or zero
UWORD da_BootPoint ; where to start for booting
UWORD da_Name ; offset in diag area where a string
; identifier can be found (or zero if no
; identifier is present).
UWORD da_Reserved01 ; two words of reserved data. must be zero.
UWORD da_Reserved02
LABEL DiagArea_SIZEOF
; da_Config definitions
**
** DAC_BYTEWIDE can be simulated using DAC_NIBBLEWIDE.
**
DAC_BUSWIDTH EQU $C0 ; two bits for bus width
DAC_NIBBLEWIDE EQU $00 ; (indicates information is nybble wide)
DAC_BYTEWIDE EQU $40 ; BUG: Will not work under V34 Kickstart!
DAC_WORDWIDE EQU $80
DAC_BOOTTIME EQU $30 ; two bits for when to boot
DAC_NEVER EQU $00 ; obvious
DAC_CONFIGTIME EQU $10 ; call da_BootPoint when first configing
; the device
DAC_BINDTIME E