home *** CD-ROM | disk | FTP | other *** search
/ Fresh Fish 7 / FreshFishVol7.bin / bbs / text / pastex-1.3-2of8.lha / PasTeX / mf / inputs / wncyr6.mf < prev    next >
Text File  |  1991-07-03  |  7KB  |  146 lines
  1. %% @metafontfile{
  2. %%     filename="wncyr6.mf",
  3. %%     version="2.1",
  4. %%     date="30-MAY-1991",
  5. %%     filetype="Metafont: parameter",
  6. %%     copyright="Copyright (C) Humanities and Arts Computing Center,
  7. %%            University of Washington;
  8. %%            all rights reserved.  Copying of this file is
  9. %%            authorized only if either:
  10. %%            (1) you make absolutely no changes to your copy
  11. %%                including name; OR
  12. %%            (2) if you do make changes, you first rename it to some
  13. %%                other name.",
  14. %%     author="American Mathematical Society",
  15. %%     address="American Mathematical Society,
  16. %%            Technical Support Group,
  17. %%            P. O. Box 6248,
  18. %%            Providence, RI 02940,
  19. %%            USA",
  20. %%     telephone="401-455-4080 or (in the USA) 800-321-4AMS",
  21. %%     email="Internet: Tech-Support@Math.AMS.com",
  22. %%     codetable="ISO/ASCII",
  23. %%     checksumtype="line count",
  24. %%     checksum="146",
  25. %%     keywords="amsfonts, tex, metafont , cyrillic ",
  26. %%     abstract="This is the parameter file for use with 
  27. %%            wncyr6, the cyrillic font in AMSFonts 2.1."
  28. %%     }
  29. %
  30. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  31. % This is WNCYR6.MF, Washington Computer Modern Cyrillic 6 point,
  32. % which is based on WNCYR10.MF developed at the University of Washington
  33. % (based on CMCSC10.MF (Computer Modern Roman Caps and Small Caps 10 point))
  34. % and other relevant Computer Modern parameter values.
  35. % This font was created at AMS.
  36.  
  37. if unknown cmbase: input cmbase fi
  38.  
  39. font_identifier:="WNCYR V2.1"; font_size 6pt#;
  40.  
  41. % first come parameters used to set the uppercase letters
  42. % (including some for lowercase that aren't actually used)
  43. u#:=14/36pt#;               % unit width
  44. width_adj#:=0pt#;          % width adjustment for certain characters
  45. serif_fit#:=0pt#;          % extra sidebar near lowercase serifs
  46. cap_serif_fit#:=2.8/36pt#;     % extra sidebar near uppercase serifs
  47. letter_fit#:=3/36pt#;          % extra space added to all sidebars
  48.  
  49. body_height#:=162/36pt#;     % height of tallest characters
  50. asc_height#:=150/36pt#;          % height of lowercase ascenders
  51. cap_height#:=147.6/36pt#;     % height of caps
  52. fig_height#:=139.2/36pt#;     % height of numerals
  53. x_height#:=93/36pt#;          % height of lowercase without ascenders
  54. math_axis#:=54/36pt#;          % axis of symmetry for math symbols
  55. bar_height#:=52.2/36pt#;     % height of crossbar in lowercase e
  56. comma_depth#:=42/36pt#;          % depth of comma below baseline
  57. desc_depth#:=42/36pt#;          % depth of lowercase descenders
  58.  
  59. crisp#:=0pt#;               % diameter of serif corners
  60. tiny#:=7/36pt#;               % diameter of rounded corners
  61. fine#:=6/36pt#;               % diameter of sharply rounded corners
  62. thin_join#:=6/36pt#;          % width of extrafine details
  63. hair#:=8/36pt#;               % lowercase hairline breadth
  64. stem#:=18/36pt#;          % lowercase stem breadth
  65. curve#:=20.5/36pt#;          % lowercase curve breadth
  66. ess#:=17/36pt#;               % breadth in middle of lowercase s
  67. flare#:=21/36pt#;          % diameter of bulbs or breadth of terminals
  68. dot_size#:=26/36pt#;          % diameter of dots
  69. cap_hair#:=8.5/36pt#;          % uppercase hairline breadth
  70. cap_stem#:=21.5/36pt#;          % uppercase stem breadth
  71. cap_curve#:=24/36pt#;          % uppercase curve breadth
  72. cap_ess#:=19/36pt#;          % breadth in middle of uppercase s
  73. rule_thickness#:=.31pt#;     % thickness of lines in math symbols
  74.  
  75. dish#:=.8/36pt#;          % amount erased at top or bottom of serifs
  76. bracket#:=12/36pt#;          % vertical distance from serif base to tangent
  77. jut#:=17/36pt#;               % protrusion of lowercase serifs
  78. cap_jut#:=23/36pt#;          % protrusion of uppercase serifs
  79. beak_jut#:=6.8/36pt#;          % horizontal protrusion of beak serifs
  80. beak#:=42/36pt#;          % vertical protrusion of beak serifs
  81. vair#:=7/36pt#;               % vertical diameter of hairlines
  82. notch_cut#:=6pt#;          % maximum breadth above or below notches
  83. bar#:=8.5/36pt#;          % lowercase bar thickness
  84. slab#:=8.5/36pt#;          % serif and arm thickness
  85. cap_bar#:=8.5/36pt#;          % uppercase bar thickness
  86. cap_band#:=8.5/36pt#;          % uppercase thickness above/below lobes
  87. cap_notch_cut#:=6pt#;          % max breadth above/below uppercase notches
  88. serif_drop#:=2.4/36pt#;          % vertical drop of sloped serifs
  89. stem_corr#:=.8/36pt#;          % for small refinements of stem breadth
  90. vair_corr#:=.7/36pt#;          % for small refinements of hairline height
  91. apex_corr#:=0pt#;          % extra width at diagonal junctions
  92.  
  93. o#:=4.5/36pt#;               % amount of overshoot for curves
  94. apex_o#:=4.5/36pt#;          % amount of overshoot for diagonal junctions
  95.  
  96. slant:=0;               % tilt ratio $(\Delta x/\Delta y)$
  97. fudge:=1;               % factor applied to weights of heavy characters
  98. math_spread:=.8;          % extra openness of math symbols
  99. superness:=1/sqrt2;          % parameter for superellipses
  100. superpull:=1/6;               % extra openness inside bowls
  101. beak_darkness:=11/30;          % fraction of triangle inside beak serifs
  102. ligs:=2;               % level of ligatures to be included
  103.  
  104. square_dots:=false;          % should dots be square?
  105. hefty:=false;               % should we try hard not to be overweight?
  106. serifs:=true;               % should serifs and bulbs be attached?
  107. monospace:=false;          % should all characters have the same width?
  108. variant_g:=false;          % should an italic-style g be used?
  109. low_asterisk:=false;          % should the asterisk be centered at the axis?
  110. math_fitting:=false;          % should math-mode spacing be used?
  111.  
  112. % now come replacements used to set the lowercase caps
  113.  
  114. lower.u#:=10/36pt#;    % unit width
  115. lower.width_adj#:=0pt#;    % width adjustment for certain characters
  116. lower.cap_serif_fit#:=1.5/36pt#;  % extra sidebar near uppercase serifs
  117. lower.letter_fit#:=2.7/36pt#;  % extra space added to all sidebars
  118.  
  119. lower.body_height#:=103/36pt#;  % height of tallest characters
  120. lower.cap_height#:=93/36pt#;  % height of caps
  121. lower.x_height#:=59/36pt#;  % height of lowercase without ascenders
  122. lower.bar_height#:=33/36pt#;  % height of crossbar in lowercase e
  123. lower.comma_depth#:=27.5/36pt#;  % depth of comma below baseline
  124.  
  125. lower.flare#:=17/36pt#;    % diameter of bulbs or breadth of terminals
  126. lower.cap_hair#:=7/36pt#;  % uppercase hairline breadth %might be reduced to 7
  127. lower.stem#:=15/36pt#;    % lowercase stem breadth
  128. lower.cap_stem#:=18/36pt#;  % uppercase stem breadth
  129. lower.cap_curve#:=20/36pt#;  % uppercase curve breadth
  130. lower.cap_ess#:=16.5/36pt#;  % breadth in middle of uppercase s
  131.  
  132. lower.cap_jut#:=16/36pt#;  % protrusion of uppercase serifs
  133. lower.beak_jut#:=4.3/36pt#;  % horizontal protrusion of beak serifs
  134. lower.beak#:=24/36pt#;    % vertical protrusion of beak serifs
  135. lower.slab#:=7.5/36pt#;    % serif and arm thickness
  136. lower.cap_bar#:=7.5/36pt#;  % uppercase bar thickness
  137. lower.cap_band#:=7.5/36pt#;  % uppercase thickness above/below lobes
  138. lower.cap_notch_cut#:=6pt#;  % max breadth above/below uppercase notches
  139.  
  140. lower.o#:=3/36pt#;    % amount of overshoot for curves
  141. lower.apex_o#:=2.4/36pt#;    % amount of overshoot for diagonal junctions
  142.  
  143. lower.fudge:=1;      % factor applied to weights of heavy characters
  144.  
  145. generate cyrfont      % switch to the driver file
  146.