home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fresh Fish 4
/
FreshFish_May-June1994.bin
/
useful
/
reviews
/
hardware
/
emulation
/
soundvision
< prev
next >
Wrap
Internet Message Format
|
1993-09-28
|
16KB
Path: menudo.uh.edu!usenet
From: dyson@sunfish.physics.uiowa.edu (Richard L. Dyson)
Newsgroups: comp.sys.amiga.reviews
Subject: REVIEW: Cardinal SOUNDvision board for BridgeBoard users
Followup-To: comp.sys.amiga.emulations
Date: 28 Sep 1993 16:45:37 GMT
Organization: The Amiga Online Review Column - ed. Daniel Barrett
Lines: 384
Sender: amiga-reviews@math.uh.edu (comp.sys.amiga.reviews moderator)
Distribution: world
Message-ID: <289pnh$m4q@menudo.uh.edu>
Reply-To: dyson@sunfish.physics.uiowa.edu (Richard L. Dyson)
NNTP-Posting-Host: karazm.math.uh.edu
Keywords: hardware, BridgeBoard, graphics, Super VGA, sound, SCSI, MIDI, commercial
PRODUCT NAME
Cardinal SOUNDvision - Model MPC500S/1M
BRIEF DESCRIPTION
An IBM-clone 16-bit ISA slot expansion board with a CD-quality sound
synthesizer, sound mixing/recording/playback capability, a MIDI port, a SCSI
CD-ROM interface, game port and a 1 MB Super-VGA interface in one full
length card.
Requires a BridgeBoard or similar product in your Amiga.
AUTHOR/COMPANY INFORMATION
Name: Cardinal Technologies, Inc.
Address: 1832 Freedom Road
Lancaster, PA 17601
USA
Telephone: (717) 293-3124
FAX: (717) 293-3043
LIST PRICE
$289 (US) via "Computer Shopper" advertised mail-order prices.
Though discontinued by Cardinal (they have newer models of boards
with faster, more color video boards, but not multi-function like the
SOUNDvision), the board was recently available via jvj@yorkshire.com on
USENET for $125 (US).
SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS
Since this is not an Amiga product, you need to have a BridgeBoard
system such as (but not limited to) the Commodore A2286, A2386SX, or the
Vortex GoldenGate 486, and at least one 16-bit AT-bus slot after the
BridgeBoard is installed. The following hardware and software requirements
apply to that of the BridgeBoard (or IBM-clone) environment and not to the
Amiga.
HARDWARE
A minimum of 512 KB of RAM.
A hard drive is not required, but as with most software it is
highly recommended. A high density (1.44 MB) floppy drive
is required to read the installation floppies. A shared
high density Amiga floppy drive can be used as well as a
dedicated IBM floppy drive.
To take full advantage of the SOUNDvision card, a VGA
compatible or multi-sync monitor must be used. The regular
1080 or 1084S cannot be used with the VGA output from the
SOUNDvision card. A multisync monitor will allow you to
make greater use of the Amiga's display modes as well as the
IBM-clone VGA and SuperVGA modes. A manual A/B switch box
would be a recommended purchase along with your VGA or
multi-sync monitor. Otherwise, you will go crazy swapping
video cables (as well as increasing your chance of
accidentally shorting out your monitor, Amiga, and/or
BridgeBoard).
SOFTWARE
DOS version 3.3 or higher (MicroSoft)
COPY PROTECTION
None. Hard drive installable.
MACHINES USED FOR TESTING
Machine 1:
Amiga 2000 (rev 6.2) with an A2386SX @ 25 MHz
A2620 with 68881 and 68851 @ 14 MHz
1 MB Chip RAM,2 MB 32-bit Fast RAM, 5 MB 16-bit Fast RAM
Kickstart version 37.175 and WorkBench version 37.67
Janus version 2.1
generic IDE controller with Conner 30174, 170 MB hard drive
Toshiba TXM-3201A1 External CD-ROM drive
5 MB RAM on A2386SX
MS-DOS version 6.0
Windows version 3.1
Machine 2:
Amiga 3000 @ 16 MHz with an A2386SX @ 25 MHz
AmigaDOS version 2.04 with soft Kickstart on hard disk
2 MB Chip RAM,4 MB Fast RAM
50 MB hard drive
Machine 3:
Amiga 3000T with an A2386SX @ 25 MHz
Mercury 040 @ 35 MHz
2 MB Chip RAM, 20 MB Fast RAM
Kickstart version 37.175 and WorkBench version 38.35
1 MB RAM on A2386SX
MS-DOS version 6.0 on BridgeBoard
INSTALLATION
The installation of the SOUNDvision card is conventional. The
manual has general pictures and description for removing the cover all the
way down to setting all the DIP switches and jumpers. In my case, it was
not necessary to change any of the factory default settings to get it to
work. The board is a 16-bit ISA bus slot card that slips into one of the
Amiga's IBM/ISA slots and screws to the back of the computer case. There is
also a daughter board and cable that can be mounted at the back of an empty
card slot space. If you can not put the daughter board in the adjacent
"slot", then you will need to get a longer cable as the one provided is just
long enough to have this daughter board immediately adjacent to the
SOUNDvision card. The daughter board does not actually use an ISA slot, it
just has the MIDI and Game port connectors on it and is designed to mount in
an empty "back of the case" opening. This daughter board is not required if
you don't have the space to hold it or if you have no interest in the MIDI
port or game port. The main board has three stereo mini-jacks for the audio
in/out as well as the VGA connector. The SCSI interface is at the front of
the board as an internal 50-pin header. There is no external SCSI (DB-25
style) connector for the SCSI controller.
SPECIFICATIONS
Non-Interlaced SuperVGA Board:
*1024x768 SuperVGA
*1 Meg RAM on board
*High Color 640x480 65K/32K colors
*Flicker free non-interlaced monitor support
*Fast 16-bit bus interface
*Drivers for Windows, Lotus 1-2-3, Wordperfect, etc.
16-Bit CD Quality Stereo Sound:
* True Stereo 4 operator FM synthesizer (Yamaha OPL-3)
* 16-bit stereo FM synthesizer
* 20 Voice FM Synthesis
* Sampling rates up to 44.1 KHz
* Line-out for headphones, amplified stereo equipment/speakers.
Advanced 12-Bit Digital Audio Recording:
* 12-bit stereo recording and playback
* Microphone input for speech and sound
* Stereo line-in for tapes, CD's, other audio sources
* Record and mix all stereo audio sources - microphone, line-in,
CD-audio, Digital audio, FM synthesizer
* Up to 3:1 ADPCM hardware compression
CD-ROM/SCSI description:
* Supports Internal/External CD-ROM Drives
* CD Audio connector
MIDI Music Interface:
* MIDI Input/Output to standard MIDI equipment
IBM Standard Joystick Port:
* Supports popular analog joy-sticks
16-Bit PC Interface:
* Fast 16-Bit DMA operation
* Selectable IRQ, DMA settings
SOUNDvision is compatible with Major Sound Standards:
* Windows with Multi-media, Windows-3.1
* Ad Lib (Works with Sound Blaster games in Ad Lib Mode)
* Gold Sound
* MPC (Multi-media PC)
The package is bundled with several multi-media software
packages for both DOS and WINDOWS. Here are some descriptions
paraphrased from the manual:
Sequencer Plus, Jr. is a MIDI recording and editing program. It
takes advantage of the card's on-board FM synthesizer and MIDI
interface capabilities.
WinDAT and DosDAT are a multi-media application that allows the user
to play, record, and edit digital audio files.
Juke Box is an application that lets the user assemble sound events
into a playlist and then play them in the order they were arranged.
The playlist can include WAVE and MIDI files and CD-Audio tracks or
CD-ROM tracks.
Mixer provides direct control over the mixing functions from Windows
or DOS. It allows the user to set the output volume, the playback
level of the FM-synthesizer and digital audio, the playback and
record levels of LINE, MICROPHONE, and CD-ROM audio inputs.
Sound Script is a simple, but powerful multi-media authoring
language to create scripts combining sound and animation.
Mathematica's TEMPRA which includes Tempra-SHOW and Tempra-GIF for
presentations, commercial design, and multi-media productions.
(Similar in concept to AmigaVision.)
REVIEW
The SOUNDvision card, along with the popular A2386SX at 25 MHz,
provide a nice IBM-clone working environment to accent the Amiga. It is
particularly useful to Amiga BridgeBoard owners because of its ability to
provide several different functions in a single board. This is crucial for
BridgeBoard users because the stock A2000 has only one 16-bit ISA slot and
two 8-bit XT slots, the A3000 has only one 16-bit ISA slot, and the A3000T
and A4000 have just two 16-bit ISA sl