HI0:Click here to enable mouse input.|MWhen this icon shows a pointer arrow Clicking SELECT on a cell enters it into the formula.
HI1:This is the Summation icon|MClick SELECT here to enter a SUM formula|MThe area to be summed can be entered by dragging SELECT over the required cells.
HI2:Enter data or formula into selected cell(s).
HI3:Discard text or formula.
HI4:Click here to display function menu.
HI5:Selected cell or block shown here.
H0:
H1:This is the Data Entry Area.|MType data or formulae here.|MClick SELECT on € icon to enter them.
H8:Area for error reports.
H9:Neutral area: click here to select all cells.
H10:This is the Column header.|MClick SELECT to select a column of cells, Double click SELECT to adjust width.
H11:This is the Column boundary.|MDrag SELECT to change column width.
H12:This is the Row label.|MClick SELECT to select a row of cells, Double click SELECT to adjust height.
H13:This is the Row boundary.|MDrag SELECT to change row width.
H14:Body of sheet. Click or drag to select cells.
HNGR:This is the New Graph dialogue.|MChoose the Graph type you want, change any parameters and then|MSELECT on the Graph icon.
HNGR1:Click SELECT here to draw the graph.
HNGR7:This icon displays the current graph type.|MClick on the arrow to the right to change it.
HNGR8:Click SELECT here to display the menu of graph types.
HGRA:This is the Graph Axes dialogue.|MYou can set axes limits and can set logarithmic axes.
HGRD:This is the Graph Data dialogue.|MThis dialogue can be used to select which rows or columns within the selected area contain the data for the X and Y axes.
HGRD5:Click here if your data is organised in horizontal rows.
HGRD6:Click here if your data is organised in vertical columns.
HGRD1:Click here to use the selections shown when the graph is drawn.
HGRCOL:This is the Graph colours dialogue.|MThese colours are used in the drawing of graphs. Colour 1 is used for dataset 1 etc.|MTo change a colour SELECT the button beside it.
HEVAL:This dialogue box controls when and how the cells of this sheet are re-evaluated.
HESTYLE:This dialogue allows a new style to be set up or an existing style to be changed.|MModify the style by using the menu and then SELECT OK.
HESTYLE3:Press SELECT on the Apply icon to set the modified style and apply to the current selection.
HESTYLE4:This is the name of the style. If it is a new style you should enter a name here.
HESTYLE6:Click SELECT here to bring up menu of options which define the style.
HDPRINT:This is the Printer dialogue.
A0:OK
A1:Not enough memory to run this command
A2:New item not unique
A3:String too long
A4:String not terminated
A5:Name too long
A6:Improper reference to a foreign spreadsheet
A7:Number too long
A8:Hexadecimal number too long
A9:Formula too long
A10:Syntax fault - wrong sequence of symbols
A11:Illegal Character
A12:Bracket mismatch
A13:Error in if .. endif construction
A14:This command would affect originating cell
A15:If not matched by endif
A16:Zero byte not permitted in string
A17:Unknown keyword
A18:Too many spreadsheets
A20:Circular reference
A21:Macro in use cannot be deleted
A22:Division by zero
A23:Not enough space - internal buffers full
A24:Integer out of range for conversion
A25:Remainder of real division not defined
A26:Use of block as operand
A27:Wrong number of parameters to function
A28:Argument must be positive or zero
A29:Argument must be positive
A30:Argument must be positive or zero
A31:Argument must be positive
A32:Argument too large (maximum 300.0)
A33:Argument for trig function out of range
A34:Spreadsheet names don't match
A35:Block operator has unacceptable operands
A36:Argument string needs at least one character
A37:Value is undefined
A38:One or more cells are protected
A39:Attempt to assign to bad item in macro
A40:Save failed
A41:Error during file load
A42:Error in SWI
A43:Spreadsheet file not properly terminated
A44:Bad call to spreadsheet engine
A46:Too many formats
A47:Format not defined
A58:Bad subscript
A59:Wrong number of subscripts
A62:Bad expression
A70:Undefined sheet variable
A83:Array subscript out of bounds
A87:Print protocol failed
A88:Reference to undefined cell
A89:Ref. to deleted cell
A90:Overlapping target area on block copy
A91:Target area past edge of spreadsheet
A92:Macro already exists
A93:Argument is not a block
A94:Reference to non-existent spreadsheet
A95:Too many nested calls to spreadsheet engine
A96:Undefined
A97:Scalar parameter supplied instead of array
A98:Chr function of null byte
A100:Matrix dimensions do not match up
A101:Matrix destination contains expression
A102:Array wrong shape - must be 1 or 2 cells wide
A103:Interest rate not calculable with this data
A104:This function needs a single row or column
A105:Payments do not even cover interest
A106:Exponential model cannot use negative data
A107:Matrix is not square
A108:Invalid date
A109:This is not a fault
A110:Bad parameters to SWI call
A111:String quotes don't match
A112:Not enough memory for this operation
A113:Number too big
A131:Graph call fails
A132:Macro call fails
A133:Inconsistent number of parameters
A134:Unacceptable parameters to SORT
A135:Formats clash
A136:No such format
A137:Style 'Plain' cannot be deleted
A138:Invalid user name
A139:Extra text after macro
A140:This operation not allowed inside a cell
A141:Too many levels of recursion
A142:Attempt to delete a user name with outstanding references
A143:Call of undefined macro
A144:Macro call has wrong number of parameters
A145:Stack overflow
A146:Too few rows/columns being deleted
A147:Too many rows/columns being deleted
A148:Too few rows/columns being added
A149:Too many rows/columns being added
A150:Hanging expression
A151:Negative iteration count
A152:Escaped!
A153:Area reference beyond edge of spreadsheet
A154:Not enough memory to do this operation
A155:Memory running short
A156:Memory shortage cleared
A157:Memory shortage acute. Save your work immediately
A158:Memory shortage fatal. Schema is terminated
A159:Macros may not return arrays as results
A160:Array functions may not use blocks as elements of arrays
A161:N/A
A162:A spreadsheet with this name exists already
A163:Bad parameters to financial function
Bao:Bad axis orientation
Fer:Fatal error : <%s>
A165:Bad assignment with subscript %ld
A166:Statistic not computable
A167:Bad assignment with subscripts (%ld,%ld)
A168:Values of operands too large
A169:Some values undefined
A170:Unrecognisable item
A171:Bad operand for power operator
A172:Overflow in power operator
A173:Bad operands to ~ operator
A174:} missing after user name
A175:Indeterminate
A176:Bad operand for minus
A177:Could not open file
A183:Unknown sheet info attribute
A184:Unknown view info attribute
A190:Not implemented
A191:Cell size exceeds page size: can not be printed at current magnification
A192:Unrecognised Spreadsheet format
A193:Effects Buffer Full
A194:Data Transfer Failed
A195:Data Receive Failed
A196:Bad Spreadsheet File
A197:Area loaded or pasted exceeds spreadsheet bounds
A198:File type not known about, no converter found
A199:Block name in cell
A200:Unknown object
A201:Move must be immediately after Cut
A202:Can only replicate Sheet
A203:All rows and cols can not be deleted
A204:Not enough memory to complete evaluation
A205:Bad preferences file
A206:Cancelled
A207:Big cell overlaps another big cell
A208:Warning, unable to load some formulae
A209:File conversion failed
A210:Printer manager required, not present
A211:Sheet has not been saved, has no filename
A212:Sheet is already loaded
A213:This file version not understood by this version of Schema
A214:Insufficient memory to load macro(s)
A215:Bad dimensions to array
A216:Only graphics functions can be applied to graphs
A217:Bad point supplied to graph function
A218:Unknown function
A219:Sheet too large
A220:No such file
A221:Error in reading drawfile
A222:This is not a drawfile
A223:Too many parameter strings registered
A224:Bad parameter string
A225:Failed to recreate parameter string
A226:Non graph return from graph macro
A227:Bad frame
A228:Block too small for data
A229:Too deep calls to macros
A230:Too many outstanding operations
A231:Out of windows
A241:Index on item other than a block, a local array or a cell
A242:Assignment to an error
A244:No workspace directory has been set
A245:One or more files have not been saved to disc
A246:Maximum of four views per spreadsheet
A247:File is locked
A248:Error in workspace file
A249:Failed to load sprite file
A250:Style can not be deleted - in use in sheet
A251:Another style already exist with this name
A252:Style 'Plain' can not be renamed
A253:At least one row or column must be displayed
A254:Invalid call to CELL
A255:Effect name cannot be recognised
A256:Invalid effect
A257:Font does not exist
A258:No such style name
A259:Invalid style name
A260:Too many styles
A261:No valid clipboard
A262:Illegal combination of paste options
A264:Can only delete sheets from the top-level
A265:No converter found to export in this file type
A266:This version of this macro file not understood by Schema2, please try recompiling
A267:Too many graphics objects
A268:Bad graphics parameter string
A269:Spreadsheet name is invalid
A272:Insufficient memory to maintain page breaks
A273:ENDMACRO encountered before a return statement
A274:Bad draw path
A275:This feature is not available in the demo version. The full version of Schema 2 is available now at £135.00 inc VAT. Existing users can upgrade for £67.50 inc. Contact Clares on 0606 48511
PQ1:1 file modified
PQn:%d files modified
PQc:Cancel
PQa:Discard
LOSP:Heap space low. Save all sheets NOW and close a sheet or restart
2930:!
empty:This sheet or selection is empty
BADDT:Invalid Date or Time
STL:Sheet too large for Schema2: limit is %d cells
TMM:Too many menus.
TME:Too many items in a menu
notitle:Untitled
notitlen:Untitled%d
PEsc:Escape (print cancelled)
SelOver:Saving selection is going to overwrite the document !!!
Cancel:Cancel
Continue:Continue
Discard:Discard
Cut:Cut
blockcut:You are cutting the end of a referenced block
Reduce:Some data may be lost, are you sure?
OK:OK
Row:Row
Column:Column
UnsaveSh:This sheet has been modified
MacNL:Macro %s has not been loaded
NoShell:Advance Shell missing
FT:Font error: Save all sheets immediately
RepFont:Can not find font %s, trying to replace with %s
LERROR:ERROR
WSPNoLoad:Unable to load file %s : %s
NoPrinter:Printer Unknown
NoCell:No spreadsheet cell selected. Click on a cell in a spreadsheet window where you want the graph to be planted.
PlantOver:The current selected area overlaps with the data area for this graph.
GrTooSmall:The selected area is too small for a graph
UM:This spreadsheet can not fit on one page
# Saveas dialogue titles
DSG:Save graph:
DSS:Save:
DSA:Export:
DES:Export:
DSW:Save WS:
DSM:Save macro:
#
# Menu Help
#
LAYOUT:Page layout
PRINT:Print spreadsheet.
SHOWFILE:Display sheet details.
GOTOCELL:Move to a different cell in the spreadsheet.
SAVESHEET:Save sheet in usual format.
SSTCSV:Save sheet as comma separated values format.
SSTTSV:Save sheet as tab separated values format.
SSTDRAW:Save sheet as draw file.
SSTFORM:Save sheet as formulae.
SSTTEXT:Save sheet as text.
SSTGR:Save sheet as AGraph file.
CBL: Copy selected block to clipboard.
CUTBLOCK:Cut selected block to clipboard.
PASTEVALS:Paste values only from clipboard.
MOVEBLOCK:Move selected block.
DBL:Delete selected block.
PASTEBLOCK:Paste to selected area.
PASTEMOVE:Paste to selected area adjusting formulae.
PASTETR:Paste values in from the clipboard, swapping rows and columns.
SORT:Sort selected block.
REPLICATE:Paste from clipboard mutliple times.
PREF:Set/Clear cell protection.
ADDROWNT:Add new rows after selected row.
ADDROWS:How many blank rows.
CHHT:What cell height?
DELETEROWS:Delete selected rows.
ADDCOLUMNS:How many columns?
CHWT:What width?
DCL:Delete selected columns.
SIB:Toggle input block.
HIDEROWS:Make the selected rows invisible.|MUse reveal to make them visible again.
HIDECOLS:Make the selected columns invisible.|Muse reveal to make them visible again.
REVROWS:Make all hidden rows visible.
REVCOLS:Make all columns rows visible.
RPBREAK:Set a forced page break on the bottom selected row |Mor remove one if already present.
CPBREAK:Set a forced page break on the bottom selected column |Mor remove one if already present.
MSHVAR:Menu for variables associated with this spreadsheet.
NEWSHVAR:Create a new variable.
ESHVARMEN:View the formula for a varible and edit it.
DSHVARMEN:Delete a variable.
BIGCELL:Turn selected block of cells into one big cell (or remove big cell).
NEWINFO:New information block.
EFCLEAR:Remove all effects from select block (leaving the underlying style(s)).
EFBOLD:Toggle Bold effect in selected block.
EFITALIC:Toggle Italic effect in selected block.
EFSIZE8:Set font size = 8 point.
EFSIZE10:Set font size = 10 point.
EFSIZE12:Set font size = 12 point.
EFSIZE14:Set font size = 14 point.
EFSIZE18:Set font size = 18 point.
EFSIZE24:Set font size = 24 point.
EFSO:Set any other font size.
EFRIGHT:Line up cell contents to the right.
EFLEFT: Line up cell contents to the left.
EFCENTRE:Centre cell contents.
EFDOUBLE:If the cell is a big cell try to justify text.
VALIGN:Control the vertical placing of cell contents.
EFBOTTOM:Align cell contents with bottom of cell.
EFMIDDLE:Vertically centre cell contents.
EFTOP:Align cell contents with top of cell.
EFGRAPHS:Determine how graphics are displayed in cell(s).
EFFORECOL:Set text colour.
EFBACKCOL:Set cell colour.
EFFORMAT:Determine how numbers are dispalyed.
GRAPHAPP:Draw graph of selected area.
ECV0:Set empty cell value = 0.
ECVERROR:Fault empty cells in expressions.
AMDEGREES:Measure angles in degrees.
AMRADIANS:Measure angles in radians.
AFA1:Write cell names as A1.
AFR1C1:Write cell names as R1C1.
EVAL:Evaluation mode.
LABELS:Show/do not show row and column labels.
SOUND:Sound on/off
MGFN:Adjust magnification.
LOCKCOLS:Select 1 column or 2 adjacent columns as row labels.
LOCKROWS:Select 1 row or 2 adjacent rows as column labels.
FREECOLS:Discard columns(s) as row labels.
FREEROWS:Discard row(s) as column labels.
SELECTALL:Select all cells.
CLEARSEL:Clear selection.
SDFT:Make a new default sheet from this one. Default effects are taken from cell A1.
CHANGESIZE:Change size and dimensions of sheet.
EVALALL:Re Evaluate All Sheets.
GRDIR:Determine the data direction for graphs.
GROUTROW:Set graph data to be from rows.
GROUTCOL:Set graph data to be from columns.
DISABLESEC:Disable security.
ENABLESEC:Enable security.
WIPEBLOCK:Wipe selected block.
SVS:Save file in special format.
ADDROWS:Add rows.
HEIGHT:Change cell height in selected block.
ADDCOLS:Add blank columns after selected column.
WIDTH:Change width of selected columns(s).
ROWS:Modify sheet rows.
COLS:Mudify sheet columns.
TEXTFONT:Select text font for cell contents.
TEXTSIZE:Select text size for cell contents.
ANGLEMODE:Change angle mode (degrees or radians).
MFILE:Open file handling menu.
EDIT:Open sheet editing menu.
EFFECTS:Open effects menu.
UTIL:Open utilities menu.
FONTMEN:Select the text font.
SST:Save the spreadsheet.
FONT:Choose a specific font
FONTGROUP:Choose a font family.
BDB:Set up cell borders.
SYSGRID:Grid on sheet on/off.
FORMULAS:Show cell values/formulae.
NEWGR:Create a new graph, using the New Graph dialogue.
ALIGN:Set alignment rule.
SEV:Set empty cell rule.
ICONRIB:Show/do not show the icon ribbon in the top of the window.
SSNEWV:Open a new view on the spreadsheet.
SSDISC:Close all views on the spreadsheet and remove it from th program's memory.|MBefore doing this save to backing store (usually disc or network).
QUIT:End Schema 2 program. Frees memory.|MBefore doing this save any spreadsheets you wish to keep.
SWSP:Bring up dialogue to save as the workspace.|M
DISCMEN:Menu of spreadsheets in program's memory: selecting one removes it from the program's memory.|MIf you wish to keep it make sure it is saved to backing store before doing this.
NEWVMEN:This is a menu of all the spreadsheets in the program's memory.|MSELECT one to open a window on it.
NEWSHEET:This dialogue allows you to create new sheets.
INFORM:This dialogue tells you about the program and its version number.
CAPMACRO:Start recording your actions as a macro.
ECPMACRO:Stop recording actions as a macro and save.
MSTYLE:Open style menu.
STYLEMEN:Click on an entry in the Apply Style menu to set the current selection to the appropriate style.
NEWSTYLE:Create a new style.
ESTYLEMEN:This menu list all the sheet's styles for editing.
DSTYLEMEN:This menu list all the sheet's styles for deleting.
QUICKGR:Create a graph from selected area without going through the New graph dialogue.
REEDGR:If selected cell is a live graph, reopen the graph edit window for it.
SEVAL:Control how this spreadsheet is evaluated. (Automatic or manual; Intelligent, By Row or By Column).
SHPREFS:Determine how cell contents are interpretted.
MANEV:Do any pending manual evaluations.
DOMACRO:Run routine.
MACEXMEN:This menu lists user macros which will act on the current selection.
MDAYNUMBER:Gives weekday number of a date or time (0 to 6).
MDAYS:Gives the day-of-the-month of a date or time.
MHOURS:Gives the hour (0-23) of a date or time.
MMINUTES:Gives the minute(0-59) of a date or time.
MMONTHADD:Advances a date by exactly one month.
MMONTHSADD:Advances a date by a given number of months.
MMONTHS:Gives the month number (1-12) of a date or time.
MNOW:Gives the date and time now.
MSECONDS:Gives the second (0-59) of a date or time.
MTIME:Gives a date and time as a string.
MTTIME:Takes a year, a month, a day,an hour, a minute and a second, and gives an internal time number.
MYEARADD: Advances a date by exactly one year.
MYEARSADD:Advances a date by a given number of years.
MYEARS: Gives the year number of a date or time.
MASC:Gives the ASCII code (1-255) of any character.
MCHR:Gives the character of which the ASCII code is the argument.
MFIND:Looks up one string in another (2 arguments).
MLEFT:Gives the left part of a string (2 arguments).
MLEN:Gives the length of a string (1 argument).
MLOWER:Converts a string to lower case (1 argument).
MMID:Gives the central part of a string (3 arguments).
MRIGHT:Gives the right part of a string (2 arguments).
MUPPER:Converts a string to upper case (1 argument).
MCOSH:The hyperbolic cosine function(1 argument).
MEXP:The exponentional function (1 argument).
MLN: The natural logarithm (1 positive argument).
MLOG:The base-10 logarithm (1 positive argument).
MSINH:The hyperbolic sine function (1 argument).
MSQRT:The square root function (1 non-negative argument).
MTANH:The hyperbolic tangent function (1 argument).
MACOS:The inverse cosine (1 argument between -1 and +1).
MACOT:The inverse cotangent (1 argument).
MASIN:The inverse sine (1 arguument between -1 and +1).
MATAN:The inverse tangent ( 1 argument).
MCOS:The cosine function (1 argument).
MCOT:The cotangent function (1 argument).
MDEG:Convert radians to degrees (1 argument).
MRAD:Convert degrees to radians (1 argument).
MSIN:The sine function (1 argument).
MTAN:The tangent function (1 argument).
MALL:Gives 1 if all cells are non-zero (1 block argument).
MAVERAGE: Gives the average of the block (1 block argument).
MCOUNT: Gives the number of non-zero cells in the block (1 block argument).
MESTDEV:Gives the estimated true standard deviation (1 block argument).
MMAX:Gives the largest value in the block (1 block argument).
MMIN:Gives the smallest value in the block (1 block argument).
MPRODUCT:Gives the product of all the cells (1 block argument).
MSTDEV:Gives the sample standard deviation of all the cells (1 block argument).
MSUM:Adds up all the cells in the block (1 block argument).
MGAUSS:Gives a random number with gaussian distribution: mean = X, standard deviation = Y (2 arguments: X and Y).
MRAND:Gives a random number with rectangular distribution, between 0 and X (1 argument : X).
MABS:Gives the absolute value (1 argument).
MCEIL:Gives the nearest whole number above (1 argument).
MMFLOOR:Gives the nearest whole number below(1 argument).
MINT:Gives the nearest whole number (1 argument).
MROUND:Rounds to a given number of decimals (2 arguments).
MSIGN:Gives -1 for negative argument, 0 for 0 argument, 1 for positive argument.
MTIM:Time function menu.
MSTR:String handling menu.
MSCI:Scientific function menu.
MTRIG:Trigonometric function menu.
MARRAY:Array function menu.
MMRAND:Random function menu.
MFINANCE:Financial function menu.
MSTATS:Statistics function menu.
FMACMEN:Insert a macro from this menu in the formula.
PSHVARMEN:Insert a sheet variable from this menu in the formula.
MPREDICT:Predict a value based on a block of data.|M PREDICTION(block, model, x-value)
MALG:Algebraic function menu.
#
# Messages added to label state of graph
#
TEXTS:Text
BOXS:Rectangle
LINES:Line
CIRCLES:Circle
ELLIPSES:Ellipse
PICTOS:Imported graph
LEGENDS:Legend box
AXS:Horizontal axis
AYS:Vertical axis
COMPOUNDS:Compound object
ALLS:Complete graph
NOTYPES:Nothing
DATAS:Part of graph
SELS: selected
NAGR:This is not a live graph
OTCCBC:Two rows or columns (at most) can be locked
WSCNL:Whole sheet cannot be locked
ROCTW:Rows or columns are too high or wide to be locked
DNGR:Warning: This action destroys data!
EXPSST:Export file in Lotus123 format
SNAME:Change name of spreadsheet
APPPREFS:Set up options for application
CAPTUREM:Start capturing operations as a macro
ENDCAPT:Stop macro capture and save macro
ABORTCAP:Stop macro capture and discard
MACCAP:Make a macro from captured operations
HGRW:This is a graph
GRX:What to do with this graph
SGRDR:Save as a drawfile (possibly to another application)
PLANTL:Put the graph into the selected cell in a spreadsheet
GRPRINT:Print the graph
GRH:The entry leads to the graph edit menu
GRDEL:Delete the selected object in the graph
GRTOP:Bring the selected object to the front
GRCS:Give up the current selection
GRSS:Select the whole graph
GRB:This entry leads to the graph effects menu
GRFONTM:Select a text font
GRTEXTS:Select a font size
GRSIZE8:Use an 8-point font
GRSIZE10:Use a 10-point font
GRSIZE12:Use a 12-point font
GRSIZE14:Use a 14-point font
GRSIZE18:Use an 18-point font
GRSIZE24:Use a 24-point font
GRSO:Use a non-standard font size
GRSOTHER:Enter the font size you need (in points)
GRTAX:Change the text aspect ratio (values below 1.00 give thin characters)
GRTASP:Enter the aspect ratio as a decimal number
GTCOL:Choose the text colour
GRTB:Choose the text background - normally the same as the graph background
GRFICOL:Choose a colour to fill boxes,circles and ellipses
GRLWID: Choose a line width
GRLIT:Thin lines are 1 pixel wide
GRLI1:Line width 1 os unit (1/180th inch)
GRLI2:Line width 2 os units (1/90th inch)
GRLI4:Line width 4 os units (1/45th inch)
GRLIOT:Choose another line width
GROLT: Select line width in 1/256 of an OS unit
GRLDASH:Select dottiness of a line
GRNONE:No dots - continuous line
GRDOTS:Line made of closely spaced dots
GRSHORT:Line made of short dashes
GRMEDIUM:Line made of medium dashes
GRLONG:Line made of long dashes
GRSTCAP:Starting cap of line
GRSCN:No starting cap
GRSCR:Round starting cap
GRSCB:Square starting cap
GRSCT:Triangular starting cap (variable dimensions)
GRENCAP:Ending cap of line
GRECN:No ending cap
GRECR:Round ending cap
GRECB:Square ending cap
GRECT:Triangular ending cap (variable dimensions)
GRCALE:Cap length (applies to both start and end caps)
GRSCSZ:Give cap length (0-15) as multiple of line width
GRCAWI:Cap width (applies to both start and end caps)
GRECSZ:Give cap length (0-15) as multiple of line width
GRLICOL:Choose the line colour
GRF:This entry leads to the graph details menu
GRTDE:Redraw graph with three-dimensional appearance
GRGRID:Redraw the graph with a grid
GREXPL:Redraw the graph with the selected segment exploded
GRCOLINC:Change the graph colours
GRBW:Change the width of histogram bars
GRBWZ:Enter the width as a percentage (0-100) of the available width
GRSC:Change the colour of the selected segment
GRPS:Choose the style of the points in the graph
GRPNONE:No points
GRPX:Diagonal crosses
GRPPLUS:Vertical crosses
GRPTRI:Solid triangles
GRPDIA:Diamond-shaped points
GRPBOX:Square points
GRPSX:Choose the size of the points in the graph
GRPSXZ:Give a point size in printer's points
GRAXLIN:Set up ticks on the selected axis
GRCOST:Enter the number of ticks between labelled axis points
GRDIMS:Change the graph dimensions
GRU:The entry leads to graph utilities
GRMAG: Graph magnification
GRSGS: Enter grid size in OS-units
GRC:Align new objects with the grid
GRT:Insert a new object
GRNEWTEXT:Add a segment of text
GRNEWLINE:Add a line segment
GRNEWBOX:Add a rectangular box
GRNEWE:Add an ellipse
GRNEWC:Add a circle
GRFULL:Import a full-sized drawfile (not a sprite!)
GRSCALED:Import a drawfile scaled to fit into a box
GRNEWFILE:Import a drawfile to fit a box exactly.The aspect ratio can change
MFV:Future value of investment:|M FV(interest,term,payment)
MIPMT:Interest component of investment:|M IPMT(rate,period,term,starting value)
GRSELD:Reselect data used to draw this graph
MIRR:Equivalent rate of interest:|M IRR(block)
MNPER:Number of payments to settle:|M NPER(interest,payment,starting value)
MNPV: Net present value:|M NPV(interest,block)
MPMT:Total payments to discharge:|M PMT(interest,term,starting value)