home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Datafile PD-CD 3
/
PDCD_3.iso
/
utilities
/
utilss
/
scsi2
/
!SCSIMgr
/
Messages
< prev
next >
Wrap
Text File
|
1995-04-11
|
14KB
|
392 lines
#
# Message file for !SCSIMgr
#
menu1T:SCSIMgr
menu2T:Configure
menu3T:Cache
menu4T:CMOS
menu1:>Info,Password,System Lock,CMOS,Configure,EasyShare,Quit
menu2:Boot Drive,SCSIFSEject,SCSIDirCache
menu3:None,8K,16K,32K,64K,128K,255K
menu4:Lock,>Save
msg200::Move mouse over icon/window for Help
msg201:Verifying Partition %d, Please Wait
msg202:Verifying Whole Device, Please Wait
msg203:Block: %7ld to %-7ld
msg204:Verify Aborted, Too many errors
msg205:Abort Verify Operation?
msg206:Verify Complete, No bad blocks found
msg207:Verify Complete, %d bad blocks found, Do you want to re-assign them?
msg211:Formatting, Please Wait
msg221:Re-assigning bad blocks...
msg222:Re-assign Complete
msg223:Drive does not support REASSIGN
msg224:Not enough spare blocks to re-assign to
msg225:Bad blocks can only be eliminating by reformatting
msg302:Part0
msg303:Bad Partition Header Block - Re-partition Device
msg304:Invalid size
msg305:Invalid block size
msg307:Read Permission:
msg308:Write Permission:
msg309:Partition %d Size:
msg310:A0123456789.
msg311:MB
msg312:Partition %d Name:
msg313:A~$&%@\\^:.#*""|
msg314:All partitions must have names
msg315:Partition names must be > 2 characters
msg316:Partition names must be unique
msg317:Error initializing partition
msg318::%d = Unconfigured
msg319::%d = Dev %03d Part %d
msg320:WARNING: Changing the Low-Level device parameters will invalidate the partition table
msg321:WARNING: Setting the Host ID will reset the SCSI bus, use with caution!
msg322:DANGER: Formatting will destroy all data on the device!
msg323:Format Complete, %02d:%02d:%02d
msg324:Format in Progress, Please Wait for Format to Complete
msg325:Ready to Verify Whole Device?
msg326:About to update SCSI Configuration
msg327:You need to re-partition the WHOLE device
msg328:DANGER: Wipe will erase all data in partition %d!
msg329:Initialization of partition %d complete
msg330:DANGER: Partitioning will erase all data on the device!
msg331:Partitioning Complete
msg333:%s: %s
msg334:Setting Block Size to %d Bytes
msg335:%s
msg336:ERROR: %s
msg337:Mapping Drive %d: to Device %03d, Partition %d
msg338:Reassign
msg339:Verify
msg340:Test Unit Ready
msg341:Write Block
msg342:Read Block
msg343:Read Capacity
msg344:Partitioning
msg345:Click OK to continue, CANCEL to quit operation
msg346:Adjust logical device parameters
msg347:Select new Host ID
msg348:Select Host SCSI IDs allowed to read partition
msg349:Select Host SCSI IDs allowed to write to partition
msg350:Set new partition size
msg351:Set new partition name
msg352:Click OK to continue
msg353:Formatting device...
msg354:Verifying device, press CANCEL to stop
msg355:Insufficient memory to complete operation
msg356:Select partition or whole device
msg357:Mode Select
msg358:Dismounting all partitions assigned to SCSI Device %03d
msg359:Force Claim
msg360:Insufficient memory for help window
msg361:Format
msg362:No Partition Selected
msg363:Set New Password
msg364:D\x
msg367:D\x
msg369:D\x
msg365:Do you want to alter the password?
msg366:Retype Password
msg368:Enter Password
msg370:Too many units detected!
msg371:Password remains unchanged
msg372:Looking for SCSI devices, Please wait...
msg373:Write protected, unable to save password file!
msg374:Gateways for Card %d
msg375: %02d
msg376: %02d - %4d%c %03d %s
msg377:Unable to assign Gateway to this type of SCSI device
msg378:16
msg379:512
msg380:Unable to assign Gateway to device on same card
msg381:Buffer size:
msg382:A1234567890
msg383:KB
msg384:Set Gateway buffer size (multiples of 16K only)
msg385:Buffer size must be in multiples of 16K and less than %dK!
msg386:Do you want to lock the system?
msg387:Access Denied
msg388:Password does not match system. Change Password?
msg389:You have possibly left write protected partitions unprotected, do you really want to Quit ?
msg390:ERROR %d
msg391:Select YES or NO
msg392:Certify Media ?
msg393:Mode Sense
msg394:WARNING: This operation may RESET the SCSI Bus and CLOSE all open SCSI files!
msg395:WARNING: This operation will CLOSE all open SCSI files!
msg396:Driver Control Flags for SCSI Device %03d
msg397:Select Driver Control Flags and Press OK
msg399:Changes made to SCSI Configuration. Implement them now? (Otherwise they will take effect after the next re-boot)
msg400:This partition is Write Protected, Do you wish to override this?
msg401:Select Format Control Options and Press OK
msg402:You have partitions > 511MB this is not supported by your version of RiscOS
msg403:Select SCSIFS Boot Options and Press OK
msg404:No Hard Drives found to Configure
msg405:Changes made to SCSI Configuration. You will need to RE-BOOT for them to take effect
msg406:Device does not support FORMAT with selected options
msg407:Cannot increase size of following partition
msg408:Partitioning disabled
msg409:Altering Mode Select parameters may impair the operation of your SCSI Device. Proceed with caution!
msg410:Unable to change block size
msg442:Configure
msg443:l40
msg444:R/O
msg445:R/W
msg446:%s device %03d
msg447:Device does not support Log Pages
msg448:Unable to find any readable log pages
msg449:Log Page device %03d
msg450:Adjust space required for RiscOS and Click Clear Table
msg500:OK
msg501:CANCEL
msg502:YES
msg503:NO
msg504:CONTINUE
msg997:key=%d code=%d codea=%d ptr=%d sksv=%x fp=%d
msg998:Logical Block = %d
msg999:%d
type0:Direct Access
type1:Sequential
type2:Printer
type3:Processor
type4:WORM
type5:CD-ROM
type6:Scanner
type7:Optical
type8:Changer
type9:Comms
type10:Type 10
type11:Host
type12:Type 12
type13:Type 13
type14:Type 14
type15:Type 15
type16:Type 16
type17:Type 17
type18:Type 18
type19:Type 19
type20:Type 20
type21:Type 21
type22:Type 22
type23:Type 23
type24:Type 24
type25:Type 25
type26:Type 26
type27:Type 27
type28:Type 28
type29:Type 29
type30:Type 30
type31:Unknown
format0:SCSI Device: %03d
format1:%-3.3s %s
format2:%-11.11s
format3:%-8.8s
format4:%-16.16s
format5:%-4.4s
format10:%d
format11:%s MB
format12:%s
format13:%s
format22:Write Error counters page
format23:Read Error counters page
format24:Read-Reverse Error counters page
format25:Verify Error counters page
format30:Space remaining: %s MBytes
help100:Information on the Devices window
help101: The Devices window shows all SCSI devices connected to your
help102:computer system. SCSI Manager allows you to Format, Verify and
help103:Partition Direct Access and Optical Memory type devices, Host
help104:type devices (ie: SCSI Cards in your computer) can have their
help105:SCSI ID changed.
help106:
help107: To select a device, click on its entry in the list (the list
help108:is scrolled with the arrow buttons), depending on the device
help109:type, tool buttons (below the device list) and the Partitions
help110:window will be updated.
help111:
help112: For most SCSI devices it is normal to format, verify and then
help113:partition the device, if the device has been used before, you
help114:can usually skip the Format and Verify steps.
help115:
help200:Information on the Partitions window
help201: A SCSI device can contain upto sixty four partitions, this
help202:window allows you to create and edit the partitions:
help203:CLEAR SPLIT MERGE + SIZE - NAME ACCESS:
help204: These are the partition editor buttons, use them to create the
help205: number, sizes and properties of the partitions you require.
help206:EXECUTE:
help207: This writes your partition list to, and will erase all other
help208: data on, the SCSI device. If you adjust the size or number of
help209: partitions you will need to use this to update the device.
help210:WIPE:
help211: If the device has already been partitioned, this allows you to
help212: re-initialize a single partition whilst leaving others intact.
help213:
help214:Also note that if the device already contains partitions, you
help215:can change Name & ACCESS for a partition without re-partitioning.
help300:Information on the Drives window
help301: Although you can create upto sixty four partitions on a device,
help302:RISC OS can only access a maximum of four at any one time.
help303:You can set which partition is mapped to which drive (:4 to :7)
help304:using the Drives window.
help305:
hel