home *** CD-ROM | disk | FTP | other *** search
/ The Datafile PD-CD 3 / PDCD_3.iso / pocketbk / utilsa / batt / BATT.DOC next >
Text File  |  1993-01-08  |  2KB  |  53 lines

  1.  
  2.  
  3.                 Battery Checker 1.0
  4.             Plug-In version for Notepad
  5.            (c)1993 Pelican Software Inc.
  6.                   P.O.Box 741072
  7.               Houston Tx. 77274-1072
  8.  
  9. 1/7/1993
  10.  
  11. Freeware from Pelican Software Inc.
  12.  
  13. Battery.opa is provided to be as a procedure installable onto the
  14. system screen. Use Psion<I> to install.
  15.  
  16. Battery.opo is the Notepad Plug-In version. Use Plugins.app to install.
  17.  
  18.  
  19. Battery Checker 1.0 is a routine written in Opl to enable
  20. more intelligent checking of the life left in the batteries.
  21. The method used is similiar to that used on your car battery.
  22. A battery is not good just because it has the required voltage,
  23. but is good if it maintains that voltage when performing any task
  24. you ask it to do. If it is not able to maintain, then it is normally
  25. considered to be bad or on its way out.
  26.  
  27. There are two routines included with BC 1.0. They are both for increasing
  28. the load on the batteries. The file called xxx.opo is for a light load.
  29. The file called Load.opo is for a heavy load test. The XXX.opo is a simple
  30. loop that writes numbers to the screen. If BC shows your main batteries while
  31. running this low load test, then the batteries are gone, and probably your
  32. S3 is telling you so anyway. The heavy load test is more significant, in that
  33. it copies a file to a remote computer using the 3link. This puts a much heavier
  34. load on the batteries, and will tell you if they will last long or not.
  35.  
  36. The benefit of Battery Checker is that it shows you every movement in voltage
  37. as the Operating system sees them. It is not tremendously intelligent since the
  38. S3 itself is not very inteligent when it comes to reading the power in the batt's.
  39. But it does perform the load test which is a far better way of determining the
  40. battery condition.
  41.  
  42. Keys:
  43. X = Exit
  44. Menu = pull down options
  45. help = show help
  46.  
  47. Plug-In info:
  48.  
  49. Load this app into Notepad via the Plugins.app application supplied with
  50. Notepad 4.0 This will enable the Battery checker to be installed to Np's
  51. menu using Psion<K>.
  52.  
  53.