home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BURKS 2
/
BURKS_AUG97.ISO
/
LINUX
/
BOOT12
/
README.TXT
(
.txt
)
< prev
next >
Wrap
Text File
|
1997-04-19
|
10KB
|
238 lines
These are 1.2 MB bootkernel images for Slackware Linux 3.2.0.
These disks currently use Linux 2.0.29.
You'll need one of these to get Linux started on your system so that you can
install it. Because of the possibility of collisions between the various Linux
drivers, several bootkernel disks have been provided. You should use the one
with the least drivers possible to maximize your chances of success. All of
these disks support UMSDOS.
You will be using the bootkernel disk to boot a root-install disk. See the
/rootdsks directory for these.
A bootkernel disk is created by writing the image to a formatted floppy disk
with RAWRITE.EXE. For example, to use RAWRITE.EXE to create the
bare.i bootdisk you'd put a formatted disk in your floppy drive and issue
the following command:
C:\> RAWRITE BARE.I A:
--------------------------------------------------------------------------------
Here's a description of the disks:
IDE bootdisks: (All IDE bootdisks support IDE hard drives and CD-ROM
drives, plus additional support listed below)
--------------
aztech.i CD-ROM drives: Aztech CDA268-01A, Orchid CD-3110,
Okano/Wearnes CDD110, Conrad TXC, CyCDROM CR520, CR540.
bare.i (none, just IDE support)
cdu31a.i Sony CDU31/33a CD-ROM.
cdu535.i Sony CDU531/535 CD-ROM.
cm206.i Philips/LMS cm206 CD-ROM with cm260 adapter card.
goldstar.i Goldstar R420 CD-ROM (sometimes sold in a 'Reveal
Multimedia Kit').
mcd.i NON-IDE Mitsumi CD-ROM support.
mcdx.i Improved NON-IDE Mitsumi CD-ROM support.
net.i Ethernet support.
optics.i Optics Storage 8000 AT CD-ROM (the 'DOLPHIN' drive).
sanyo.i Sanyo CDR-H94A CD-ROM support.
sbpcd.i Matsushita, Kotobuki, Panasonic, CreativeLabs
(Sound Blaster), Longshine and Teac NON-IDE CD-ROM
support.
xt.i MFM hard drive support.
SCSI bootdisks: (All SCSI bootdisks feature full IDE hard drive and
CD-ROM drive support, plus additional drivers listed
below)
---------------
7000fast.s Western Digital 7000FASST SCSI support.
advansys.s AdvanSys SCSI support.
aha152x.s Adaptec 152x SCSI support.
aha1542.s Adaptec 1542 SCSI support.
aha1740.s Adaptec 1740 SCSI support.
aha2x4x.s Adaptec AIC7xxx SCSI support.
(For these cards: AHA-274x, AHA-2842, AHA-2940,
AHA-2940W, AHA-2940U, AHA-2940UW, AHA-2944D, AHA-2944WD,
AHA-3940, AHA-3940W, AHA-3985, AHA-3985W)
am53c974.s AMD AM53/79C974 SCSI support.
aztech.s All supported SCSI controllers, plus CD-ROM support for
Aztech CDA268-01A, Orchid CD-3110, Okano/Wearnes CDD110,
Conrad TXC, CyCDROM CR520, CR540.
buslogic.s Buslogic MultiMaster SCSI support.
cdu31a.s All supported SCSI controllers, plus CD-ROM support for
Sony CDU31/33a.
cdu535.s All supported SCSI controllers, plus CD-ROM support for
Sony CDU531/535.
cm206.s All supported SCSI controllers, plus Philips/LMS cm206
CD-ROM with cm260 adapter card.
dtc3280.s DTC (Data Technology Corp) 3180/3280 SCSI support.
eata_dma.s DPT EATA-DMA SCSI support. (Boards such as PM2011,
PM2021, PM2041, PM3021, PM2012B, PM2022, PM2122, PM2322,
PM2042, PM3122, PM3222, PM3332, PM2024, PM2124, PM2044,
PM2144, PM3224, PM3334.)
eata_isa.s DPT EATA-ISA/EISA SCSI support. (Boards such as
PM2011B/9X, PM2021A/9X, PM2012A, PM2012B, PM2022A/9X,
PM2122A/9X, PM2322A/9X)
eata_pio.s DPT EATA-PIO SCSI support. (PM2001 and PM2012A)
fdomain.s Future Domain TMC-16x0 SCSI support.
goldstar.s All supported SCSI controllers, plus Goldstar R420
CD-ROM (sometimes sold in a 'Reveal Multimedia Kit').
in2000.s Always IN2000 SCSI support.
iomega.s IOMEGA PPA3 parallel port SCSI support. (also supports
the parallel port version of the ZIP drive)
mcd.s All supported SCSI controllers, plus standard non-IDE
Mitsumi CD-ROM support.
mcdx.s All supported SCSI controllers, plus enhanced non-IDE
Mitsumi CD-ROM support.
n53c406a.s NCR 53c406a SCSI support.
n_5380.s NCR 5380 and 53c400 SCSI support.
n_53c7xx.s NCR 53c7xx, 53c8xx SCSI support. (Most NCR PCI
SCSI controllers use this driver)
optics.s All supported SCSI controllers, plus support for the
Optics Storage 8000 AT CD-ROM (the 'DOLPHIN' drive).
pas16.s Pro Audio Spectrum/Studio 16 SCSI support.
qlog_fas.s ISA/VLB/PCMCIA Qlogic FastSCSI! support. (also
supports the Control Concepts SCSI cards based on the
Qlogic FASXXX chip)
qlog_isp.s Supports all Qlogic PCI SCSI controllers, except the
PCI-basic, which is supported by the AMD SCSI driver.
sanyo.s All supported SCSI controllers, plus Sanyo CDR-H94A
CD-ROM support.
sbpcd.s All supported SCSI controllers, plus Matsushita,
Kotobuki, Panasonic, CreativeLabs (Sound Blaster),
Longshine and Teac NON-IDE CD-ROM support.
scsi.s A generic SCSI bootdisk, with support for most SCSI
controllers that work under Linux. (NOTE: This disk
wastes a lot of memory, since it contains nearly *all*
of the SCSI drivers. If you know which SCSI controller
your system has, it's *far* better to use the disk
designed especially for it. But, if you don't know,
then this generic disk might just work for you.)
scsinet.s All supported SCSI controllers, plus full ethernet
support.
seagate.s Seagate ST01/ST02, Future Domain TMC-885/950 SCSI
support.
trantor.s Trantor T128/T128F/T228 SCSI support.
ultrastr.s UltraStor 14F, 24F, and 34F SCSI support.
ustor14f.s UltraStor 14F and 34F SCSI support.
---------------------------------------------------------------------------------
IMPORTANT HELPFUL HINTS: (AND WHAT TO DO IF THE INSTALLED SYSTEM WON'T BOOT)
The kernels provided with the Slackware A series (ide and scsi) are reasonably
generic to maximize the chances that your system will boot after installation.
However, you should compile a custom kernel after installing, selecting only the
drivers your system requires. This will offer optimal performance. You'll need
to recompile your kernel to enable support for non-SCSI CD-ROM drives, bus-mice,
sound cards, and many other pieces of hardware. The drivers could not be
included with the pre-compiled kernels because they cause system hangs and other
compatiblity problems for people that don't have the hardware installed.
On a similar note, any time you use one kernel to install, and a different
kernel the first time the installed system is started, you run the risk that
the second kernel won't be compatible for some reason. If your system fails
to reboot after installation, you'll have to compile a custom kernel for your
hardware. Follow these steps:
0. If you haven't installed the C compiler and kernel source, do that.
1. Use the bootkernel disk you installed with to start your machine. At the LILO
prompt, enter