home *** CD-ROM | disk | FTP | other *** search
- DOCUMENT:Q103100 09-SEP-1993 [W_NT]
- TITLE :Bindings List Blank when a Network Adapter is Selected
- PRODUCT :Windows NT
- PROD/VER:3.10
- OPER/SYS:WINDOWS
- KEYWORDS:
-
- --------------------------------------------------------------------
- The information in this article applies to:
-
- - Microsoft Windows NT operating system version 3.1
- - Microsoft Windows NT Advanced Server version 3.1
- --------------------------------------------------------------------
-
- From Control Panel, in the Network Bindings option, when you select a
- Network Interface Card (NIC) from the Show Bindings For drop down list
- box, the Bindings list is empty.
-
- This behavior is by design. The Bindings dialog box is designed to
- show the bindings below the component selected in the Show Bindings
- For drop down list box. Because an adapter has no bindings downward,
- there is nothing to show. If you select the Driver for the adapter,
- you will see a binding from the driver to the adapter.
-
- Additional reference words: 3.10 W_NTAS nic
- KBCategory:
- KBSubcategory: netsrv
-
- =============================================================================
-
- THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS
- ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
- OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
- EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
- ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
- CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
- MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
- OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
- SO THE FOREGOING LIMITATION MAY NOT APPLY.
-
- Copyright Microsoft Corporation 1993.