home *** CD-ROM | disk | FTP | other *** search
- Document 1205
- Slow Disk Transfers
-
- Initials:
- LM
- 09/18/91
- DRDOS 6.0
-
- Keywords:
- DISK
-
- Description:
- Some customers may experience very slow data transfer rates when
- their applications are doing direct disk input. The slow transfer
- rate is a result of how DR DOS handles device drivers or
- applications which use upper memory blocks while writing data to
- the disk drive
-
- Under DR DOS, disk access going through UMBs is transferred to
- conventional memory before it is written. It is then written one
- sector at a time. This reduces 1:1 interleave down to 17:1 which
- results in disk writes being 3 to 8 times slower than disk
- writes going directly through conventional memory. It is only a
- problem with writes to the disk, not reads.
-
- What would cause this slow transfer rate under DR DOS?
-
- 1) A disk I/O driver loaded into upper memory, such as the
- Stacer disk compressor or Disk Manager. The workaround is to
- load the driver in conventional memory.
-
- Note: The DR DOS SuperStor driver averts this problem by leaving
- the DMA TRANSFER part of its code in conventional memory.
-
- 2) An application that makes disk transfers through UMBs, such
- as Lotus 3, Paradox 3, Autocad 386, Autocad 11.
-
- Digital Research designed DR DOS to make disk writes through
- conventional memory in order to protect customers with Bus
- Master controllers (newer PS/2 models) or some older hardware.
- Without this protection, data on their drives could be severly
- corrupted.
-
- Digital Research is currently investigating this problem. Please
- keep in contact with technical support for more information.
-
-