home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
progc
/
c_all592.arj
/
TI356.ASC
< prev
next >
Wrap
Text File
|
1992-02-25
|
7KB
|
265 lines
PRODUCT : TURBO C NUMBER : 356
VERSION : 1.0
OS : PC-DOS
DATE : July 9, 1987 PAGE : 1/4
TITLE : STRUCTURE PUSH FLOATING POINT PATCH
The following patch solves a problem with pushing structures with
floating point elements onto the stack in Turbo C.
To apply this patch, you will need to use the DOS utility
DEBUG.COM. You may obtain a copy of DEBUG.COM from one of your
original PC-DOS or MS-DOS diskettes.
NOTE:
1. Do not patch your original Turbo C disk, use a working or
backup copy of TCC.EXE and TC.EXE for this patch.
2. DEBUG is not sensitive to upper and lower case. All
addresses are listed in upper case for ease of readibility.
3. XXXX,YYYY,ZZZZ are hexidecimal digits returned by DEBUG.
You must replace these digits accordingly when typing in
your commands.
4. While in DEBUG, the prompt will appear as a dash (-).
5. If you do not receive the appropriate response, press "q"
followed by <Enter>, to exit from DEBUG. Check your version
number and, if correct, try again.
6. TCC.EXE and TC.EXE will not fit together onto a 360K disk.
To patch both programs on a floppy disk, you may need to
copy TCC.EXE and DEBUG.COM onto one disk and perform the
patch. Save the patched version of TCC.EXE to another disk.
Repeat the same steps using TC.EXE.
At the DOS prompt, type the following information exactly as it
appears (Conclude each line by pressing <Enter>).}
Patch for TCC.EXE
Type the following: You will see:
ren tcc.exe tcc.xex<Enter> A>
debug tcc.xex<Enter> -
r<Enter> ... CS=XXXX ...
-
h XXXX 1C0C<Enter> YYYY ZZZZ
-
e YYYY:2FAD<Enter> YYYY:2FAD 25.
A9<Space> YYYY:2FAD 25.A9 01.
<Space> YYYY:2FAD 25.A9 01. 00.
<Space> YYYY:2FB0 81.
74<Space> YYYY:2FB0 81.74 E2.
0B<Space> YYYY:2FB0 81.74 E2.0B 00.
40<Space> YYYY:2FB0 81.74 E2.0B 00.40 00.
26<Space> YYYY:2FB0 81.74 E2.0B 00.40 00.26
0B.
83<Space> YYYY:2FB0 81.74 E2.0B 00.40 00.26
0B.83 D0.
47<Space> YYYY:2FB0 81.74 E2.0B 00.40 00.26
0B.83 D0.47 74.
6<Space> YYYY:2FB0 81.74 E2.0B 00.40 00.26
0B.83 D0.47 74.6 0A.
1<Space> YYYY:2FB8 26.
<Space> YYYY:2FB8 26. 83.
<Space> YYYY:2FB8 26. 83. 47.
57<Space> YYYY:2FB8 26. 83. 47.57 06.
8<Space> YYYY:2FB8 26. 83. 47.57 06.8
01.
0<Space> YYYY:2FB8 26. 83. 47.57 06.8
01.00 26.
29<Space> YYYY:2FB8 26. 83. 47.57 06.8
01.00 26.29 83.
6<Space> YYYY:2FB8 26. 83. 47.57 06.8
01.00 26.29 83.6 57.
54<Space> YYYY:2FC0 08.
74<Space> YYYY:2FC0 08.74 00.
90<Enter> YYYY:2FC0 08.74 00.90
-}
w<Enter> Writing 2948A bytes
-
q<Enter> A>
ren tcc.xex tcc.exe<Enter> A>
Patch for TC.EXE
Type the following: You will see:
ren tc.exe tc.xex<Enter> A>
debug tc.xex<Enter> -
r<Enter> ... CS=XXXX ...
-
h XXXX 2557<Enter> YYYY ZZZZ
-
e YYYY:2FA4<Enter> YYYY:2FA4 25.
A9<Space> YYYY:2FA4 25.A9 01.
<Space> YYYY:2FA4 25.A9 01. 00.
<Space> YYYY:2FA4 25.A9 01. 00. 81.
74<Space> YYYY:2FA8 E2.
0B<Space> YYYY:2FA8 E2.0B 00.
40<Space> YYYY:2FA8 E2.0B 00.40 00.
26<Space> YYYY:2FA8 E2.0B 00.40 00.26 0B.
83<Space> YYYY:2FA8 E2.0B 00.40 00.26 0B.83
D0.
47<Space> YYYY:2FA8 E2.0B 00.40 00.26 0B.83
D0.47 74.
6<Space> YYYY:2FA8 E2.0B 00.40 00.26 0B.83
D0.47 74.6 0A.
1<Space> YYYY:2FA8 E2.0B 00.40 00.26 0B.83
D0.47 74.6 0A.1 26.
<Space> YYYY:2FB0 83.
<Space> YYYY:2FB0 83. 47.
57<Space> YYYY:2FB0 83. 47.57 06.
8<Space> YYYY:2FB0 83. 47.57 06.8 01.
0<Space> YYYY:2FB0 83. 47.57 06.8 01.0
26.}
29<Space> YYYY:2FB0 83. 47.57 06.8 01.00
26.29 83.
6<Space> YYYY:2FB0 83. 47.57 06.8 01.00
26.29 83.6 57.
C<Space> YYYY:2FB0 83. 47.57 06.8 01.00
26.29 83.6 57.C 08.
A3<Space> YYYY:2FB8 00.
90<Enter> YYYY:2FB8 00.90
-
w<Enter> Writing 38759 bytes
-
q<Enter> A>
ren tc.xex tc.exe<Enter> A>