home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
lan
/
ps2386.arj
/
PS2SCSI.TXT
< prev
Wrap
Text File
|
1991-03-05
|
2KB
|
38 lines
This README file accompanies PS2SCSI.DSK for NetWare 386 v3.10 rev. A. The
following file is included for this revision:
PS2SCSI DSK 9577 02-12-91 9:03p
The previous driver was reporting a Non-Media-Error when the SCSI device
returned a completion of 07 - Adapter Hardware Failure and 0ch - Command
Completed with failure. This would result in deactivation of the SCSI
device. This version of the driver will retry when encountering the 0ch
error rather than deactivating the device.
WARNING!!! Using this PS2SCSI.DSK in conjunction with VREPAIR.NLM (86330
dated 1-09-91 VRP310.ZIP) may cause a loss of data!
To install this version of PS2SCSI.DSK:
1) Copy PS2SCSI.DSK to your NetWare system start-up area (SYS:SYSTEM and/or
DOS partition). Be sure to delete the old version of the PS2SCSI
driver.
2) Load the driver as you normally would on your system.
*****************************************************************************
DISCLAIMER
Novell, Inc. makes no representations or warranties with respect to this
software program, and specifically disclaims any express or implied
warranties of merchantability, title, or fitness for a particular purpose.
Novell's intentions for this software program is to provide a temporary
work-around to the anomalies described in this file. Such work-arounds are
typically addressed in future releases of NetWare.
Novell will not be responsible for any data loss that may result from
implementing this program. Novell strongly recommends a backup be made
before any program is applied. Technical support for this program is
provided at the discretion of Novell.
*****************************************************************************