home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
hamradio
/
nosvw137.arj
/
NOSFILES.ZIP
/
AUTOEXEC.NOS
< prev
next >
Wrap
Text File
|
1991-09-18
|
7KB
|
256 lines
# ============ NOSview [137]
# AUTOEXEC.NOS
# ============
# This is the configuration file for NOS.
# This file must be at the NOS root.
# There are many commands which must be provided to NOS to
# configure the program each time it is started . To save
# having to type them by hand each time, you put them in
# this file, which is read each time NOS starts up. Commands
# in this file are entered exactly as they would be typed at
# the keyboard when running NOS.
# AUTOEXEC.NOS is the default name for the configuration file.
# You can also produce alternative versions with different
# names. This is a very convenient way of setting up different
# scenarios. To use one of these alternatives, you include
# its name as the final parameter in the NOS command line.
# See NOSview\NOS for more details.
# NOS ignores all lines in this file beginning with a pound/hash
# sign (#).
# This example file contains intelligent default values for each
# of the commands. You need to read it completely, changing
# things if necessary as you go. If you're not sure what to do
# with a command, try leaving it like it is.
# Many of the commands are commented out with the # sign. As
# you gain experience with NOS you can then remove the # signs
# to try out these commands.
# If NOS hangs when starting up, it could be due to errors in
# this file. To help discover what is wrong, you can trace the
# startup using the -v option in the NOS command line. Again,
# see NOSview\NOS for details.
# Miscellaneous setup ******************************************
attended on
escape # <ESC> character
isat yes # 286/386 clock
multitask on
log dump/session.log
watch off
memory ibufsize 256
memory nibufs 1
motd "If I'm not here, please leave a message in the mailbox."
# Set up domain defaults ***************************************
domain cache size 30
domain suffix ampr.org.
domain translate on # display host names
domain verbose off # do not display suffix
# Station Identification ***************************************
ip address ns9bob
hostname ns9bob
ax25 mycall NS9BOB-5 # This MUST precede 'attach'
# Set up the TNC ***********************************************
attach asy 0x3f8 4 ax25 tnc0 2048 256 4800 # COM1
# trace tnc0 211
param tnc0 1 20 # TX delay (x 10mS)
param tnc0 2 63 # Persistence (0-255)
param tnc0 3 10 # Slot Time (x 10mS)
param tnc0 4 10 # TX tail (x 10mS)
param tnc0 5 0 # 0=HDX
# Set up AX.25 *************************************************
ax25 bc tnc0
ax25 bcinterval 179
ax25 bctext "NS9BOB-5 TCP/IP 44.131.41.1 Bedford"
ax25 digipeat on
ax25 irtt 2500
ax25 maxframe 2
ax25 paclen 256
ax25 pthresh 128
ax25 retry 10
ax25 t3 65000
ax25 t4 300
ax25 timertype linear
ax25 version 2
ax25 window 2048
mode tnc0 vc
# Set up the Ethernet interface ********************************
# attach packet 0x60 en0 8 1500
# arp add ns9jim ether 00:11:22:3:44:55
# route add ns9jim en0
# Set up the AXIP wormhole *************************************
# attach axip ai0 256 ns9jim NS9BOB-11
# Set up ifconfig **********************************************
ifconfig tnc0 broadcast uk
ifconfig tnc0 netmask 0x44FFFFFF
# Set up TCP/IP defaults ***************************************
ip ttl 10
tcp mss 216
tcp irtt 65000
tcp window 216
tcp timertype linear
# Start network services ***************************************
start ax25
start discard
start echo
start finger
start ftp
start pop
start remote
start rip
start smtp
start telnet
start ttylink
# Configure NET/ROM ********************************************
# start netrom
# attach netrom
# netrom interface tnc0 #BOB 192
# netrom nodetimer 1800
# netrom obsotimer 1200
# netrom verbose on
# netrom minquality 10
# netrom ttl 15
# netrom acktime 3000
# netrom qlimit 1024
# netrom retries 5
# netrom irtt 5000
# netrom promiscuous on
# netrom timertype linear
# netrom bcnodes tnc0
# mode netrom vc
# Set up NET/ROM routing ***************************************
# netrom route add #GWB NS9GWB-2 tnc0 192 NR9AAA-2
# Set up NET/ROM filtering *************************************
# netrom nodefilter mode accept
# netrom nodefilter add NR9AAA-2 tnc0 255
# netrom nodefilter add NR9ZZZ-2 tnc0 90
# Set up the ARP table *****************************************
arp add uk ax25 QST-0
arp add ns9bob ax25 NS9BOB-5
arp add ns9gwa ax25 NS9GWA-5
# arp add ns9gwb netrom NS9GWB-5
# Set up AX.25 routing *****************************************
ax25 route add AX9AAA-2
ax25 route add NS9LIZ-5 AX9DGA-0 AX9DGB-0
# Set up AX.25 modes *******************************************
ax25 route mode AX9AAA-2 vc
ax25 route mode NS9LIZ-5 datagram
# Set up IP routing ********************************************
route addprivate default tnc0
route addprivate uk tnc0
route add ns9pam tnc0 ns9gwa 2
# route add region42/24 netrom ns9gwb
# Set up RIP ***************************************************
# rip merge no
# rip add uk 900 6
# rip refuse ns9bbb
# rip refuse ns9ccc
# rip request uk
# Set up RSPF **************************************************
# rspf interface tnc0 8 32
# rspf rrhtimer 900
# rspf suspecttimer 2000
# rspf timer 900
# rspf message "RSPF routing in use. RIP disabled"
# Set up the hop check (route tracer) environment **************
hop maxwait 60
hop maxttl 10
hop queries 2
# Get every NOS node in range to emit their NET/ROM broadcasts
# to load our tables. Very heavy on bandwidth!!!
# remote -s dummy
# remote uk kick
# Set up the mailbox *******************************************
third-party off
smtp timer 600
smtp gateway ns9gwa
smtp usemx on
smtp mode route
smtp kick
mbox attend on
mbox motd "Please use 'sp sysop' to leave a message for G3NRW"
# Wake up POP to start shipping any outstanding mail ***********
# pop mailbox ns9bob
# pop userdata ns9bob bobspasswd
# pop mailhost ns9mha
# pop kick
# pop mailhost ns9mhb
# pop kick
# Set up FTP defaults ******************************************
ftype binary
eol standard
# Set up function keys *****************************************
source scripts/source/fkeys.src
# Display the function key list ********************************
# >>>>>>> THIS IS THE LAST COMMAND IN THE FILE <<<<<<<<
more scripts/source/fkeys.lst
# THE END