C-Worthy (R) Message Librarian Data File Version 1.0
COPYRIGHT (C) 1985 - 1988. All Rights Reserved.
Custom Design Systems, Inc. Provo, Utah USA.
DESCRIPTION
The description for this error is not available.
ERROR
Error Report
Further program execution is not possible.
SEVERITY
Program execution should continue normally.
The current operation cannot be completed.
Unable to load overlay file "%s$RUN.OVL".
Trace forced to exit because it could not create a portal.
Program Trace Portal
Please Wait
The system error library file "%s" is missing.
The error portal could not be created during program initialization.
The portal control block table is full, and an attempt was made to create another portal.
An attempt to allocate additional memory was unsuccessful.
An attempt was made to create a portal of height %d and width %d.
An attempt to seek to a specific position in the file "%s" failed.
An attempt to read from the file "%s" returned an end of file error. The read request was for %d bytes.
An attempt to read from the file "%s" failed. The read request was for %u bytes.
File "%s" should have had %u bytes read from it.
An attempt was made to push a list on the list stack, and the list stack is already full.
An attempt was made to pop a list from the list stack, and the list stack was empty.
The attempt to display the utility header, with the current date and time, failed.
<Press ESCAPE to continue>
An attempt to allocate %u bytes of additional memory failed.
An attempt to open the file "%s" failed.
An attempt to close the file "%s" failed.
File "%s" should have had %d bytes written to it.
An attempt to write to file "%s" failed. The write request was for %u bytes.
An attempt was made to get the first element in a list and the list was empty.
An attempt was made to get the last element in a list and the list was empty.
An attempt was made to restore the current list from an invalid list buffer number %d.
An attempt was made to save the current list to an invalid list save buffer number %d.
An attempt to free a section of memory that was previously allocated failed.
January
February
March
April
August
September
October
November
December
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
An attempt was made to get the current portals information, and there was not a currently selected portal.
An attempt to create the file "%s" failed.
The string that was passed to EditPortalString was longer than the maximum length allowed. Possibly the string was not properly initialized.
The procedure "EditText" failed because the default text was longer than the specified maximum length.
Cancel All Changes
Save Changes
The Paste Buffer Is Empty.
The Text Buffer Is Full.
No Insertions Allowed While Mark Is On.
The Marked Block Is Too Big For Available Memory.
There Are No Characters In The Marked Block.
An attempt was made to set Dynamic Message Number %d. There is no such dynamic message pointer.
The help file "%s" is the wrong version.
The Help Librarian Data File "%s" could not be found. The help system will not be able to provide some contextual help for this utility.
The Help Librarian Data File "%s" could not be read. The help system will not be able to provide some contextual help for this utility.
The Help Librarian Data File "%s" is the wrong version. The help system will not be able to provide some contextual help for this utility.
No application specific help is available at this point. Pressing the HELP key again will display a list of the function key assignments on your machine.
The text to be displayed in the current portal was too long to fit in the portal.
There is not a currently selected portal in which to display the text.
There is no preceding help screen.
This is the last help screen.
The following keys are available while viewing help:
PAGE UP
Backs up to the previous help screen.
PAGE DOWN
Moves to the next help screen.
Displays a list of the function key assignments on your machine.
ESCAPE
Exits help.
A read error occurred while reading the overlay file "%s$RUN.OVL".
The overlay file "%s$RUN.OVL" is the wrong version for this utility.
GetMessage was called, but no message was specified.
GetMessage was called, but the requested system message has been deleted.
An unknown procedure
GetError was called, but the specified procedure has been deleted.
Back up to the previous level.
Exit the program.
CANCEL
Cancel markings or edit changes.
BACKSPACE
Delete the character to the left of the cursor.
INSERT
Insert a new item.
Delete an item.
DELETE
MODIFY
Rename/modify/edit the item.
SELECT
Accept information entered or select the item.
Provide on-line help.
Toggle marking for current item.
CYCLE
Cycle through menus or screens.
Move up one line.
Move down one line.
Move left one position.
RIGHT
Move right one position
SPECIAL UP
Move to the very beginning.
SPECIAL DOWN
Move to the very end.
Move to the left-most position on the line.
SPECIAL RIGHT
SPECIAL LEFT
Move to the right-most position on the line.
Move up one page.
Move down one page.
FIELD LEFT
Move left one field or word.
FIELD RIGHT
Move right one field or word.
Special function 1.
Special function 2.
Special function 3.
Special function 4
Special function 5.
Special function 6.
Special function 7.
Special function 8.
Special function 9.
Special function 10.
The function key assignments on your machine are:
No More Help Available.
GetListIndex was called with the element "%s", but that element was not found in the currently selected list.
AlignChangedList was called with the element "%s", but that element was not found in the currently selected list.
AlignListDisplay was called with the element "%s", but that element was not found in the currently selected list.
An attempt to remove the file "%s" failed.
An attempt to rename the file "%s" to "%s" failed.
Change Modes.
PushHelpContext was called to push the help context number %d, but the help context stack is already full.
An attempt was made to return to the previous help context, but there is no previous help context on the help context stack.
An attempt was made to set the help context to number %d, but there are only %d help contexts defined (help context numbers are zero based).
The data file was not of the correct type.
The data file format is the wrong version.
A read error occurred while reading the data file.
The Palette Stack Is Full.
The Palette Stack Is Empty.
*** ERROR REPORT ***
An attempt was made to delete directory "%s", but the directory is currently being used by another station.
An invalid drive was used.
The specified directory cannot be found.
You have no rights to create the directory "%s".
The directory "%s" already exists.
Invalid parameters encountered.
No error is returned from this function call.
An attempt to allocate additional memory to add element "%s" to the current list was unsuccessful.
%s returned an error code of %d.
Version 3.0 Compiler Required
An attempt to Seek within the Source file failed.
An attempt to Read a record from the Source file failed.
An attempt to Write to the temporary file failed.
An attempt to unlink the file "%s" failed because the file was not found.
An attempt to unlink the file "%s" failed because the specified path was not found.
An attempt to unlink the file "%s" failed because access was denied.
An attempt to get the DOS country information failed because the alternate keyboard handler file was not found.
An attempt to rename the file "%s" to "%s" failed because the specified file was not found.
An attempt to rename the file "%s" to "%s" failed because the specified path was not found.
An attempt to rename the file "%s" to "%s" failed because access was denied.
An attempt to rename the file "%s" to "%s" failed because the destination device was not the same.
An attempt to duplicate a file handle failed because there are too many open files.
An attempt to duplicate a file handle failed because the specified file handle was invalid.
An attempt to remove the directory "%s" failed because the specified directory was not found.
An attempt to remove the directory "%s" failed because access was denied.
An attempt to remove the directory "%s" failed because the specified drive is invalid.
An attempt to close the file "%s" failed because the specified file handle is invalid.
An attempt to seek to a specific position in the file "%s" failed because the mode is invalid.
An attempt to seek to a specific position in the file "%s" failed because the handle is invalid.
An attempt to create the file "%s" failed because the specified directory was not found.
An attempt to create the file "%s" failed because there are too many open files.
An attempt to create the file "%s" failed because access was denied.
An attempt to open the file "%s" failed because the specified files was not found.
An attempt to open the file "%s" failed because the specified directory was not found.
An attempt to open the file "%s" failed because there are too many open files.
An attempt to open the file "%s" failed because access was denied.
An attempt to open the file "%s" failed because the specified access code is invalid.
An attempt to read from the file "%s" failed because access was denied. The read request was for %u bytes.
An attempt to read from the file "%s" failed because the specified file handle was invalid. The read request was for %u bytes.
An attempt to create the directory "%s" failed because the specified path was not found.
An attempt to create the directory "%s" failed because access was denied.
An attempt to write to the file "%s" failed because access was denied. The write request was for %u bytes.
An attempt to write to the file "%s" failed because the specified file handle was invalid. The write request was for %u bytes.
An attempt to get the DOS country information failed.
An attempt to duplicate a file handle failed.
An attempt to remove the directory "%s" failed.
The combined width of the program header and the version number is greater than 34. This means that the header will be overwritten by the date and time for certain days in certain months (ie. Wednesdays in September). Please shorten the header message.
An attempt to allocate %d file handles failed, must be in the range of 5 to 260.
An attempt to close a file in the extended table failed.
Abandon Changes
There is 1 required field that has not been answered.
There are %d required fields that have not been answered.
Edit Unanswered Field
Edit First Unanswered Field
Cancel All Changes And Exit
Tentative
Answered
Unanswered
Invalid
Mark Field
through
%s is not valid. The value must be in the range
Continue Edit
Cancel Edit
Leave Invalid
Leave Unanswered
Sept.
This field is secure and cannot be edited.
The number of items in the current menu will not fit on the screen.
(.txt)