home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
bbs_ra
/
raqu_420.arj
/
RAQUSER.CFG
< prev
next >
Wrap
Text File
|
1991-02-21
|
9KB
|
254 lines
% ┌──────────────────────────────────────────────────────────────────────────┐
% │ Configurationsfile for RAQUSER 4.20α │
% │ │
% │ Copyright (C) 1989 by Bo Bendtsen │
% └──────────────────────────────────────────────────────────────────────────┘
%
% This program is a combination of 5 programs.
% QBRM from Lars Lautrup
% RAISE and MAXI from Jesper Larsen
% UPCALLS and QBBSSTAT by myself.
% The reason why this program was made is that i ran 3 programs after
% a user has logged off my system. I took very long time, so i thought
% aha why not combine these 3 program, so that the user file only should
% be scanned once.
% And voila here is the final result (I hope). I have used most of QBRM
% and RAISE's configuration files, so it would be easy to change if you
% are using one of those. Then I thought why not stop in the QBBSSTAT
% and MAXI, so I could have fresh stats & tops.
% All programs has been improved and expanded.
%
% --- RUN THIS PROGRAM EACH TIME A USER LOGS OFF ---
%
% Fill out these if you are a registered user of all my software
% First is the name you want in your textfiles.
% Second is the name of your board
% 3th og 4th is 2 codes which are calculated from Name og BoardName
% So it is very important that they always are exactly the same.
%
RegToName Bo Bendtsen
RegToBoard Danish Amiga Boards
RegCode1 0
RegCode2 0
%
% This line tells RAQUSER where to find your QBBS/RA or SBBS userfile
% If you skip this line, current directory will be used.
%
SystemPath C:\QBBS\MSGBASE
%
%
% This line tells RAQUSER where to find your QBBS/RA or SBBS messagefiles
% If you skip this line, current directory will be used.
%
MessagePath C:\QBBS
%
%
% Enable this option and tell me were to put the textfiles
% if not enabled current dir is used.
%
TextPath C:\QBBS\TEXT
%
%
% This is the name of the logfile in which you want the actions written
% if you don't want anything written just disable this statement
%
LogFile C:\QBBS\SYSTEM.LOG
%
%
% This defines the logtype you want to use. RAQUSER should be used after each
% caller have logged off, so users will be checked/upgraded/lowered at once
% Raquser will only write in your logfile when it changed something, not like
% other program, that will write each time it has run, so your logfile will
% increase. Just disable this option if you don't want anything written
% anywere
%
LogType 1
% LogType : 1 = QuickBBS
% 2 = Remote Access
% 3 = FrontDoor
% 4 = Binkley/Opus
%
%
% Create a backup of the userfile as USERS.OLD, before touching anything
%
% Backup
%
%
% Allow filesharing. SHARE.EXE must be loaded, use only in multinode env.
%
% Sharing
%
%
% Make global statistic-files in your text-directory (QBBSSTAT.ANS/ASC)
%
Statistics
%
%
% Make Top-files MAXI_TOP.ANS/ASC in your text-directory.
% Tops 20 will generate Top-20 lists of uploaders/downloaders/posters/callers
% Maximum is 50
% TopHead is the header of the top file.
% if you don't want to make any toplists, just disable...
%
Tops 15
%
TopHead ≡═- Danish Amiga Boards ∞ 2:230/106 ∞ Home of DAB -═≡
%
%
% This will exclude users with Access 32000 (Sysops, not in top lists)
% Use a number within the range of 0-65535
%
ExcludeUsers 32000
%
%
% The following is a list of definitions for raising calling users:
% Raise users with security level If calls >= to security level
% ─────────────────────────────── ──────────── ─────────────────
%
Calls 500 3 1000
Calls 1000 100 5000
Calls 2000 100 5000
Calls 3000 100 5000
%
%
% This will raise all users with level 1000,2000,3000 and has called
% more than 100 times to level 5000.
% You could use this as an award for calling your system lots of times.
% Maximum Calls statements are 50, which is more than enough
%
% The following is a list of definitions for raising uploading users:
% Raise users with security level If upload >= to security level
% ─────────────────────────────── ──────────── ─────────────────
%
Raise 1000 50 2000
Raise 2000 150 3000
Raise 3000 500 5000
%
% Maximum Raise statements are 50, which is more than enough
%
%
% The following is a list of definitions for raising users who writes
% a lot of messages and should be awarded
% Raise users with security level If messages >= to security level
% ─────────────────────────────── ──────────── ─────────────────
%
Messages 1000 10 2000
Messages 2000 50 3000
Messages 3000 100 5000
%
% Maximum Messages statements are 50, which is more than enough
%
%
% When the Up-/Download ratio is exeeded, the RAQUSER program
% can change the users security-level or change a flag.
% You can use both if you like, but that is not adviceable.
%
% UseLevels
UseFlags
%
%
% When Maxlevel is specified no security-level above Maxlevel
% will be processed. if you specify 9999 then only users
% with security-level 0 - 9999 will be processed.
% This can be very usefull, if you don't want your Co-Sysops or
% any other hi-level users to be lowered.
%
Maxlevel 9999
%
%
% Here you must specify the Up-/Download ratio. If you specify
% 2 - Then the user can download twice the amount, he has uploaded.
% If security level not is specified here he/she has unlimitied ratio
% Maximum Ratio statements are 50, which is more than enough
%
% Ratio used for users with level Ratio 1:X
% ─────────────────────────────── ───────────
Ratio 500 5
Ratio 1000 8
Ratio 2000 10
Ratio 3000 12
Ratio 5000 15
%
%
% This is the amount in KB, the user can download before Raquser
% will do anything. Greedy is used if you don't want to give away
% the first lets' say 100kb for free. If the ratio is 1:10 then the
% user must upload 10kb if he downloads 100kb. If the Greedy
% statement is disabled the FREE_K is totally free.
%
Free-K 100
%
Greedy
%
%
% DL-LEVEL is the security-level where Download is available -
% but it's also the security-level downgraded users will get, when
% their ratio is back to normal.
% This has no effect unless the USELEVELS parameter is specified!
%
DL-Level 1000
%
%
% This is the security-level where download isn't available. All
% users with an exeeded ratio will be lowered to this level.
% This has no effect unless the USELEVELS parameter is specified!
%
NODL-Level 500
%
%
% This is basically the same as the DL-LEVEL parameter, but instead
% of changing security-levels, this will set or reset a flag.
% In this example the userflag A5 will be 1, if the ratio is OK.
% This has no effect unless the USEFLAGS parameter is specified!
% Legal flags: [A1....A8] [B1....B8] [C1....C8] [D1....D8]
%
DL-Flag A5 1
%
%
% This is basically the same as the NODL-LEVEL parameter, but
% instead of changing security-levels, this will set or reset
% a flag. In this example the userflag A5 will be 0 if the ratio
% is exeeded!
% This has no effect unless the USEFLAGS parameter is specified!
% Legal flags: [A1....A8] [B1....B8] [C1....C8] [D1....D8]
%
NODL-Flag A5 0
%
%
% If a user has flag D8 the user will be excluded from the ratiochecking.
% This is usefull if you have certain users with low access level that you
% want to have free download.
% Legal flags: [A1....A8] [B1....B8] [C1....C8] [D1....D8]
%
Forget D8
%
%
% Raquser is able to send a message to the user being upgraded/
% downgraded. To do this, the program reads the text from the
% files: UPGRD.RAQ, DWNGR.RAQ, RAISE.RAQ, CALLS.RAQ and MESSG.RAQ.
% Read the "RAQUSER.DOC"-file for information on the .RAQ-files.
% The parameter after SENDMSG is the number of the message-board.
% Remember it is a bad idea to use an echo area, but i'll add an
% origin so that people will know what yerk that sends out personally
% letters in an echomail area. The FromName option is used as the
% from-user in the message, Guess what subject is used for.
% If you dont want any messages to be written, just disable....
%
SendMsg 1
%
FromName Bo Bendtsen
%
Subject Your account on this board
%
%
% Send HELLO.RAQ to users that has been logged on one time
% a user will not recieve more than one letter, not even when you
% run RAQUSER again service ain't it.
%
SayHello
%
%
% ┌──────────────────────────────────────────────────────────────────────────┐
% │ End of Configuration file │
% └──────────────────────────────────────────────────────────────────────────┘