home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
bbs_mail
/
gmd_310.arj
/
SAMPLE.CFG
< prev
next >
Wrap
Text File
|
1991-11-03
|
17KB
|
396 lines
; Sample GMD 3.10 Configuration File
; ====================================
; ****************************************************************************
;
; PLEASE NOTE:
;
; GMD is a very powerful program. Used properly, GMD can detect many types of
; grunged messages and some types of duplicate messages.
;
; Used improperly, GMD is capable of deleting valid echo mail, generating
; false warning messages, and violating Policy in general. Thus, you should
; be very careful in setting it up and in using it. If you haven't read and
; understood FTS-0001 and FTS-0004 then you should not attempt to configure or
; use GMD.
;
; To protect you, me and the rest of the Net, GMD will not delete an echo mail
; message without sending an information message to the originator.
;
;
; Please refer to the the GMD documentation file for more information.
;
;
; You will have to change the sample values below to suit your own needs. It
; is very important to configure these parameters to match your system:
;
; Mail.Inbound
; Ignore_Pkt_From
; System.Domain
; System.Zone
; System.Net
; System.Node
; System.Point
; System.SysOp
; System.Private_Net (if needed)
;
; These parameters may also be configured to suit your style of operation:
;
; Log.Screen_Level
; Log.Level
; Log.File
; Log.Error_Stats
; Mail.Error_Stats
; Mail.Bad_Area
; Info_Message.Kill_Sent
; Stat.File
; Stat.Max_Nr_To_Node
; Max_Nr_Per_Packet
; Ignore_Pkt_To (if needed)
; Ignore_Echo_List (if needed)
; Info_Message.Pass_File
; Info_Message.Delete_File
; Info_Message.Pass_Subject
; Info_Message.Delete_Subject
; ****************************************************************************
;
; General Operation
;
; This section contains general information about your system and how GMD
; should operate.
General:
; GMD logs both to the screen and to a file. You can specify the level of
; detail you want for each. Each level includes the information in the
; lower levels.
;
Log.Screen_Level = 2 ; 0 - 5
Log.Level = 4 ; 0 - 5
Log.File = GMD.Log ; filespec
; These will generate some summary statistics about the numbers and types of
; non-conforming messages. The first appends this information to the above
; logs. The second sends this information to you in a net mail message.
;
Log.Error_Stats = y ; y or n
Mail.Error_Stats = y ; y or n
; This defines the directory containing the incoming packets. It is usually
; your inbound mail area.
;
Mail.Inbound = C:\In\ ; directory with trailing "\"
; This is the name of the echo mail area where GMD will send "saved" copies of
; non-conforming messages.
;
Mail.Bad_Area = GMD_Bad ; echo area name
; This tells GMD whether or not to set the "kill/sent" attribute in the
; information messages which it generates.
;
Info_Message.Kill_Sent = y ; y or n
; This tells GMD the name of the statistical database. In this data base GMD
; maintains statistical information about the number and types of errors
; encountered for each node. The database is cleared by deleting the file.
; GMD provides a reporting program. See the documentation for the reporting
; program for the details of database file layout.
;
Stat.File = GMD.Dat ; filespec
; This tells GMD the maximum number of information messages to send because of
; a particular node. It uses the statistical database defined above. This
; parameter has no effect when the information message is generated because a
; message has been deleted.
;
Stat.Max_Nr_To_Node = 5 ; 1 - 10
; GMD keeps track of the number of information messages it sends out per
; packet. When that number gets larger than what is configured below, GMD
; stops sending out information messages for that packet.
;
Max_Nr_Per_Packet = 50 ; 25 - 100
; This partially stops your GMD from processing incoming packets. It stops
; your GMD from generating information messages and save copies, unless a
; delete is also called for, in which case it processes normally. This
; allows for the possibility of a message being grunged even though you are
; generally ignoring the packet. To prevent generating duplicate information
; messages to other nodes, you should list any nodes you connect with who also
; run GMD. You should also always list your echo mail feed, even if he
; doesn't run GMD.
;
Ignore_Pkt_From = 1:13/13 396/1 ; node address(es), optional
; short form is OK.
; Example: 396/1 2 3
; This stops your GMD from processing incoming packets which are addressed to
; certain nodes. This allows for "passthrough" packets which your system is
; not going to import or toss. This complements QM's Pkt_Forward feature.
;
;Ignore_Pkt_To = 1:396/2 1:1/1 ; node address(es), optional
; short form is OK.
; Example: 396/1 2 3
; This stops GMD from checking packet endings to see if the are legal or not.
;
Ignore_Illegal_Packet_Ending = n ; y or n
; This stops GMD from processing messages for the echoes listed.
;
;Ignore_Echo_List = xyz, qrs ; list of echoes, optional
; ****************************************************************************
;
; Set Definitions
;
; This section contains definitions of sets which are used in the Default and
; Area Sections. Sets are used to specify character sets and zone numbers,
; for example. You can name them whatever you want to and you can have as
; many as you need.
;
; You can specify single number(s) or range(s) of numbers. A number is
; decimal by default, but can also be in hex or character form. Hex numbers
; start with "0x" and are followed by the hex digits. Characters are enclosed
; in single quotes ('). In all cases the numbers must be between 0 and 255.
; A range a number, followed by the word "to", followed by the other number.
; If more than one number, or range, is used, each must be separated by a
; comma.
Sets:
Char_ASCII = ' ' to 126
Char_HiBit = ' ' to 126, 128 to 168, 173, 224 to 240
Char_All = 0x01 to 0xFF
Zone_1 = 1
Zone_2 = 2
Zone_3 = 3
Zone_4 = 4
Zone_5 = 5
Zone_6 = 6
Zone_Fido = 1 to 6
Zone_All = 1 to 255
; ****************************************************************************
;
; Default Message Standards
;
; This section contains the default settings used for the echo areas. These
; settings can be overridden for specific echoes by using the Area Section.
;
; Most of these parameters test conditions, hence use the "ids" commands.
Default:
; Define you system's address and your name. These are used in the
; information messages that GMD generates.
;
System.Domain = fidonet ; string
System.Zone = 0 ; 1 - 255
System.Net = 0 ; 1 - 65535
System.Node = 0 ; 0 - 65535
System.Point = 0 ; 0 - 65535
System.SysOp = "John Doe" ; string
;System.Private_Net = 0 ; 1 - 65535, optional
; The message length is the length of the packed message. This includes the
; header and the "unbounded text" of the message. In other words, all of the
; control fields are included.
;
Message.Length = 13312 is ; 8192 - 60000, "is"
; GMD sends two styles of information messages, depending on whether or not
; the non-conforming message was deleted (as per the setting of the "d"
; command). The messages are built from one of two template files, and one
; of two subjects.
;
Info_Message.Pass_File = GMD.Pas ; filespec
Info_Message.Delete_File = GMD.Del ; filespec
Info_Message.Pass_Subject = "Grunged Message Detected" ; string
Info_Message.Delete_Subject = "Grunged Message Deleted" ; string
; This is the criteria that GMD uses to test the conformance of the "To"
; field.
;
; - "Alphabet" checks for illegal characters (not in the specified set).
; - "Empty" checks for an empty field.
; - "Length" checks that the field is not longer than specified in FTS-0001.
;
To.Alphabet = Char_HiBit ids ; set, "ids"
To.Empty = y is ; y or n, "is"
To.Length = y ids ; y or n, "ids"
; This is the criteria that GMD uses to test the conformance of the "From"
; field. See "To.xxx" for descriptions of the tests.
;
From.Alphabet = Char_HiBit ids ; set, "ids"
From.Empty = y is ; y or n, "is"
From.Length = y ids ; y or n, "ids"
; This is the criteria that GMD uses to test the conformance of the "Subject"
; field. See "To.xxx" for descriptions of the tests.
;
Subject.Alphabet = Char_HiBit ids ; set, "ids"
Subject.Empty = n is ; y or n, "is"
Subject.Length = y ids ; y or n, "ids"
; This is the criteria that GMD uses to test the conformance of the "Date"
; field.
;
; - "Bad" tests for legal formats as specified in FTS-0001.
; - "One_Space_OK" exempts the case of only having one space, instead of two,
; between the date and time from being tested by "Bad".
; - "Old" tests for dates which are too many days old. 1/1/80 is ignored.
; - "New" tests for dates which are too many days in the future.
;
Date.Bad = y ids ; y or n, "ids"
Date.One_Space_OK = y ; y or n
Date.Old = 30 ids ; 20 - 255, "ids"
Date.New = y ids ; y or n, "ids"
; This is the criteria that GMD uses to test the conformance of the "Body" of
; the message.
;
; - "Alphabet" tests for illegal characters (not in the specified set).
; Hidden lines are NOT tested.
;
Body.Alphabet = Char_All is ; set, "is"
; This is the criteria that GMD uses to test the conformance of the gated
; origin line(s). A gated origin line starts with " # Origin: ".
;
; - "Sequence" tests that a gated origin line immediately follows another
; gated origin line, unless it is the first one.
; - "Max_Len" tests that the line is no longer than the specified length.
; - "Alphabet" tests for illegal characters (not in the specified set).
;
Gated_Origin.Sequence = y ; y or n, "is"
Gated_Origin.Max_Len = 79 ; 79 - 255, "is"
Gated_Origin.Alphabet = Char_HiBit ; set, "is"
; This is the criteria that GMD uses to test the conformance of the origin
; line. An origin line starts with " * Origin: ".
;
; - "Ending" tests that a ")" is the last character on the origin line.
; - "Exist" tests for the existence of at least 1 origin line.
; - "Sequence" tests that the origin line immediately follows a gated origin
; line, if there are any.
; - "Max_Nr" tests that there are no more than the specified number of origin
; lines.
; - "Max_Len" tests that the line is no longer than the specified length.
; - "Alphabet" tests for illegal characters (not in the specified set).
; - "Node" tests for a legally formatted node number at the end of the line
; in "()".
; - "Zones" tests for illegal zones (not in the specified set).
; - "Default_Zone" uses the "System.Zone" zone number in case the node number
; does not include a zone.
;
Origin.Ending = y is ; y or n, "ids"
Origin.Exist = y is ; y or n, "is"
Origin.Sequence = y is ; y or n, "is"
Origin.Max_Nr = 1 ids ; 1 - 10, "ids"
Origin.Max_Len = 79 is ; 79 - 255, "is"
Origin.Alphabet = Char_HiBit is ; set, "ids"
Origin.Node = y is ; y or n, "ids"
Origin.Zones = Zone_All is ; set, "is"
Origin.Default_Zone = y ; y or n
; This is the criteria that GMD uses to test the conformance of the seen-by
; line(s). A seen-by line starts with: "SEEN-BY: ".
;
; - "Exist" tests for the existence of at least 1 seen-by line.
; - "Sequence" tests that the seen-by line immediately follows the origin
; line, or another seen-by line.
; - "Empty" tests that there is at least one node listed.
; - "Max_Len" tests that the line is no longer than the specified length.
; - "Node" tests for a legally formatted node numbers. There must be at least
; one. They must be sorted. There must be no zone or point numbers.
; - "Node_Dupes_OK" exempts the case of only duplicate node numbers from being
; tested by "Node".
; - "Node_Sort_OK" exempts the case of only non-sorted node numbers from being
; tested by "Node".
; - "Max_Nodes" tests that there are no more than the specified number of
; nodes.
;
Seen_By.Exist = y ids ; y or n, "ids"
Seen_By.Sequence = y is ; y or n, "is"
Seen_By.Empty = y is ; y or n, "is"
Seen_By.Max_Len = 80 is ; 80 - 255, "is"
Seen_By.Node = y ids ; y or n, "ids"
Seen_By.Node_Dupes_OK = y ; y or n
Seen_By.Node_Sort_OK = y ; y or n
Seen_By.Max_Nodes = 500 ids ; 300 - 2000, "ids"
; This is the criteria that GMD uses to test the conformance of the path
; line(s). A path line starts with: "^aPATH: ".
;
; - "Exist" tests for the existence of at least 1 path line.
; - "Sequence" tests that the path line immediately follows the seen-by
; line(s) or another path line.
; - "Empty" tests that there is at least one node listed.
; - "Max_Len" tests that the line is no longer than the specified length.
; - "Node" tests for a legally formatted node numbers. There must be at least
; one. There must be no zone or point numbers.
; - "Node_4D_OK" exempts the cases of zone and point numbers from being tested
; by "Node".
; - "Max_Nodes" tests that there are no more than the specified number of
; nodes.
;
Path.Exist = n is ; y or n, "is"
Path.Sequence = y is ; y or n, "is"
Path.Empty = y is ; y or n, "is"
Path.Max_Len = 80 is ; 80 - 255, "is"
Path.Node = y ids ; y or n, "ids"
Path.Node_4D_OK = n ; y or n
Path.Max_Nodes = 100 ids ; 100 - 200, "ids"
; This is the criteria that GMD uses to test the conformance of the EOM (end
; of message).
;
; - "Sequence" tests that the EOM immediately follows the path line(s).
;
End.Sequence = y is ; y or n, "is"
; ****************************************************************************
;
; Exception Areas
;
; These are optional sections which contain exceptions to the defaults listed
; in the Default Section. Any setting listed there can be overridden for
; specific echoes. An echo mail area can only be listed in one Exception Area
; Section.
;
; The only required parameter in an Area Section is "Echoes". It lists the
; echo mail areas for which the exceptions which follow it apply.
;
; This is an example of how to set different "Date.Old" criteria for two
; echoes:
;
; Area:
; Echoes = COMM, TECH
; Date.Old = 20 ids
;
; This is an example of how someone in an additional Network might set up.
; Note the included file with the list of echoes:
;
; Area:
; Echoes = @Other_Echo.Lst
; System.Domain = other
; System.Zone = 7
; System.Net = 9999
; System.Node = 8888
; System.Point = 0
; System.SysOp = "Other Name"
; Origin.Zones = Zone_7 is
; - End -