home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
bbs_mail
/
bsrc_250.arj
/
MDM_PROC.C
< prev
next >
Wrap
C/C++ Source or Header
|
1991-09-15
|
24KB
|
648 lines
/*--------------------------------------------------------------------------*/
/* */
/* */
/* ------------ Bit-Bucket Software, Co. */
/* \ 10001101 / Writers and Distributors of */
/* \ 011110 / Freely Available<tm> Software. */
/* \ 1011 / */
/* ------ */
/* */
/* (C) Copyright 1987-91, Bit Bucket Software Co., a Delaware Corporation. */
/* */
/* */
/* This module was written by Vince Perriello */
/* */
/* */
/* BinkleyTerm Modem Handler Module */
/* */
/* */
/* For complete details of the licensing restrictions, please refer */
/* to the License agreement, which is published in its entirety in */
/* the MAKEFILE and BT.C, and also contained in the file LICENSE.250. */
/* */
/* USE OF THIS FILE IS SUBJECT TO THE RESTRICTIONS CONTAINED IN THE */
/* BINKLEYTERM LICENSING AGREEMENT. IF YOU DO NOT FIND THE TEXT OF */
/* THIS AGREEMENT IN ANY OF THE AFOREMENTIONED FILES, OR IF YOU DO */
/* NOT HAVE THESE FILES, YOU SHOULD IMMEDIATELY CONTACT BIT BUCKET */
/* SOFTWARE CO. AT ONE OF THE ADDRESSES LISTED BELOW. IN NO EVENT */
/* SHOULD YOU PROCEED TO USE THIS FILE WITHOUT HAVING ACCEPTED THE */
/* TERMS OF THE BINKLEYTERM LICENSING AGREEMENT, OR SUCH OTHER */
/* AGREEMENT AS YOU ARE ABLE TO REACH WITH BIT BUCKET SOFTWARE, CO. */
/* */
/* */
/* You can contact Bit Bucket Software Co. at any one of the following */
/* addresses: */
/* */
/* Bit Bucket Software Co. FidoNet 1:104/501, 1:343/491 */
/* P.O. Box 460398 AlterNet 7:491/0 */
/* Aurora, CO 80046 BBS-Net 86:2030/1 */
/* Internet f491.n343.z1.fidonet.org */
/* */
/* Please feel free to contact us at any time to share your comments about */
/* our software and/or licensing policies. */
/* */
/*--------------------------------------------------------------------------*/
/* Include this file before any other includes or defines! */
#include "includes.h"
int dial_modem (char *);
void phone_translate (char *, char *);
char *get_response (long);
int parse_response (char *);
void empty_delay (void);
#define FAILURE 0
#define IGNORE 1
#define CONNECTED 2
#define RINGING 3
#define INCOMING 4
struct resp_str
{
char *resp;
unsigned disp;
};
static struct resp_str mdm_resps[] = {
{"RINGING", 1},
{"RING RESPONSE", 1},
{"RING", 3},
{"CONNECT", 2},
{"RRING", 1},
{"BUSY", 0},
{"VOICE", 0},
{"ERROR", 0},
{"OK", 0},
{"NO CARRIER", 0},
/* "NO DIAL TONE" or "NO DIALTONE" */ {"NO DIAL", 4},
{"DIALING", 1},
{"NO ANSWER", 0},
{"DIAL TONE", 1},
{NULL, 0}
};
static char *response_string = " ";
void do_dial_strings ()
{
MDM_TRNS *m;
predial = normprefix;
postdial = normsuffix;
m = mm_head;
while (m != NULL)
{
if (m->mdm & newnodedes.ModemType)
{
predial = m->pre;
postdial = m->suf;
return;
}
m = m->next;
}
}
void try_2_connect (char *phnum)
{
long t1;
int j, k;
for (j = 0; (j < poll_tries && !KEYPRESS ()); j++) /* do polltries or till keypress */
{
CLEAR_INBOUND ();
k = dial_modem (phnum);
if ((un_attended || doing_poll) && fullscreen)
{
++hist.calls_made;
(void) sprintf (junk, "%-4d", hist.calls_made);
sb_move (history_hWnd, HIST_ATT_ROW, HIST_COL);
sb_puts (history_Out, junk);
}
if ((k > 0) || KEYPRESS ())
break;
t1 = timerset (200);
mdm_hangup ();
while (!timeup (t1) && !KEYPRESS ())
time_release (); /* pause for 2 seconds */
}
if (KEYPRESS ()) /* If user's been busy */
{
(void) FOSSIL_CHAR (); /* Eat the character */
if (!CARRIER) /* Abort if no carrier */
{
status_line (MSG_TXT(M_CONNECT_ABORTED));
mdm_hangup ();
}
}
predial = normprefix;
postdial = normsuffix;
}
int try_1_connect (char *phnum)
{
int k;
if ((k = dial_modem (phnum)) <= 0)
{
if (k != -2) /* NO DIAL TONE needs express service */
mdm_hangup ();
}
if ((un_attended || doing_poll) && fullscreen)
{
++hist.calls_made;
(void) sprintf (junk, "%-4d", hist.calls_made);
sb_move (history_hWnd, HIST_ATT_ROW, HIST_COL);
sb_puts (history_Out, junk);
}
predial = normprefix;
postdial = normsuffix;
return (k);
}
void phone_translate (char *number, char *translated)
{
PN_TRNS *p;
(void) strcpy (translated, number);
for (p = pn_head; p != NULL; p = p->next)
{
if (strncmp (p->num, number, (unsigned int) (p->len)) == 0)
{
(void) sprintf (translated, "%s%s%s", p->pre, &(number[p->len]), p->suf);
break;
}
}
}
int dial_modem (char *number)
{
int resp;
long t;
char translated[50];
janus_OK = 0;
ARQ_lock = 0;
phone_translate (number, translated);
if (translated[0] == '\"') /* If it's a script */
{
resp = do_script (translated); /* then do it that way */
if (fullscreen) /* & clean up the bottom line*/
bottom_line ();
return (resp);
}
status_line (MSG_TXT(M_DIALING_NUMBER), translated);
if (un_attended && fullscreen)
{
do_ready (MSG_TXT(M_READY_DIALING));
}
/* First of all, if we have something, don't hang up on the guy! */
if (!no_collide && CHAR_AVAIL ())
return (-1);
if (dial_setup != NULL)
{
mdm_cmd_string (dial_setup, 1);
}
else
{
LOWER_DTR (); /* drop DTR to reset modem */
timer (20); /* leave it down 2 seconds */
RAISE_DTR (); /* then raise DTR again */
timer (5); /* and wait .5 sec for modem */
}
if (!no_collide && CHAR_AVAIL ()) /* If we have something
* here, return */
return (-1);
mdm_cmd_string (predial, 0); /* transmit the dial prefix */
mdm_cmd_string (translated, 0); /* then the phone number */
mdm_cmd_string (postdial, 0); /* finally the dial suffix */
if (no_collide)
CLEAR_INBOUND (); /* Throw out all echo to
* this point */
mdm_cmd_char (CR); /* terminate the string */
resp = modem_response (7500);
if (resp) /* we got a good response, */
{
if (resp == RINGING) /* Incoming ring to be
* processed higher up */
return (-1);
if (resp == INCOMING) /* No dial tone. That's */
{
return (-2); /* a potential remote. */
}
t = timerset (200); /* Wait up to 2 seconds */
while (!timeup (t))
{ /* If carrier detect, AND */
if ((CHAR_AVAIL ()) && CARRIER) /* some sign of life, */
break; /* leave early... */
}
return ((int) CARRIER); /* Carrier should be on now */
}
return (0); /* no good */
}
char *get_response (long end_time)
{
char *p = response_string; /* points to character cell */
char c; /* current modem character */
int count = 0; /* count of characters */
while ((count < 50) /* until we have 50 chars, */
&& (!timeup (end_time)) /* or out of time, */
&& (!KEYPRESS ())) /* or user gets impatient */
{
if (!CHAR_AVAIL ()) /* if nothing ready yet, */
{
time_release ();
continue; /* just process timeouts */
}
c = (char) (MODEM_IN () & 0xff); /* get a character */
if (c == '\r' || c == '\n') /* if a line ending */
{
if (count != 0) /* and we have something, */
break; /* get out */
else continue; /* otherwise just keep going */
}
*p++ = c; /* store the character */
++count; /* increment the counter */
}
*p = '\0'; /* terminate the new string */
if (count != 0 && strnicmp (response_string, "AT", 2))
{
(void) fancy_str (response_string); /* make it pretty */
status_line ("#%s", response_string); /* pop it out on the screen */
}
return (response_string); /* return the pointer */
}
int parse_response (char *response)
{
char *p; /* temp character pointer */
register int i; /* array pointer */
for (i = 0; mdm_resps[i].resp != NULL; i++) /* scan through array */
{
p = mdm_resps[i].resp; /* point at possible
* response */
if (strnicmp (response, p, strlen (p)) == 0) /* if a match, */
return ((int) (mdm_resps[i].disp)); /* return disposition of it */
}
return (1); /* ignore all unknowns */
}
int modem_response (int ths)
{
unsigned int baudrate;
long end_time; /* holds time at end of 2min */
char *response; /* pointer to modem response */
char *c; /* miscellaneous pointer */
int result = IGNORE; /* result code */
int i;
int ring_count = 0; /* # of RINGING responses */
/* If this modem doesn't differentiate between RING and RINGING */
if (modemring)
mdm_resps[2].disp = IGNORE;
end_time = timerset ((unsigned int) ths); /* arm the timeout */
while ((result == IGNORE) /* until success or failure, */
&& (!timeup (end_time)) /* or out of time, */
&& (!KEYPRESS ())) /* or user gets impatient */
{
/*
* See if we've been through this code enough times to reach
* the user-defined failure threshold. For this purpose,
* we crudely assume that all IGNORE cases are rings.
*
* Henry Clark and Ron Bemis get credit for this one.
*/
if (ring_count++ >= ring_tries)
{
response = "NO ANSWER";
(void) fancy_str (response);
status_line ("#%s", response);
result = parse_response(response);
break;
}
/*
* We're still here. So get the next modem response
* (or time out trying).
*/
response = get_response (end_time); /* get a response */
result = parse_response (response); /* parse, determine status */
time_release ();
}
if (result == CONNECTED) /* Got to be a CONNECT msg */
{
if (strnicmp (response, "connect", 7) == 0)/* if this is a CONNECT, */
{
c = skip_blanks (&response[7]); /* get past the blanks */
mdm_reliable[0] = '\0'; /* Start with nothing */
if (*c == '\0') /* if nothing there, */
{
baudrate = (unsigned int) 300; /* say that it's 300 baud */
}
else
{
baudrate = (unsigned int) atoi (c); /* else do baudrate fallback */
/* For 1200/75 split speed modems and "Connect 212" */
if ((baudrate == 1275) || (baudrate == 7512)
|| (baudrate == 75) || (baudrate == 212) || (baudrate == 12))
baudrate = 1200;
/* For "Connect 103" */
if (baudrate == 103)
baudrate = 300;
}
ARQ_lock = 0;
while (isdigit (*c)) /* Get past digits */
++c;
c = skip_blanks (c); /* Get rid of blanks */
if (*c != '\0') /* We have "reliable" info. */
{
(void) strcpy (mdm_reliable, c); /* Copy in the info */
can_Janus (mdm_reliable); /* Set the flag for Janus */
for (i = 0; i < ARQs; i++)
{
if ((strnicmp (mdm_reliable, ARQ[i], strlen(ARQ[i]))) == 0)
{
ARQ_lock = 1;
break;
}
}
}
if (baudrate)
(void) set_baud (baudrate, 1);
}
MNP_Filter ();
}
return (result); /* timeout or failure or OK */
}
void mdm_cmd_string (char *mdm_cmd, int dospace)
{
register char *c;
register int escaped = 0;
if (mdm_cmd == NULL) /* defense from shit */
return;
for (c = mdm_cmd; *c; c++)
{
if (escaped)
{
SENDBYTE (*c);
escaped = 0;
continue;
}
if (*c == '\\')
{
escaped = 1;
continue;
}
if (!isspace (*c) || dospace) /* don't output spaces */
mdm_cmd_char (*c); /* output the next character */
}
}
void empty_delay ()
{
long t;
t = timerset (500);
while ((!OUT_EMPTY ()) && (!timeup (t)))
time_release (); /* wait for output to finish */
if (!OUT_EMPTY ())
{
MDM_DISABLE ();
(void) Cominit (port_ptr, buftmo);
program_baud ();
RAISE_DTR ();
CLEAR_OUTBOUND ();
CLEAR_INBOUND ();
if (un_attended && fullscreen)
{
sb_dirty ();
sb_show ();
}
}
}
void mdm_cmd_char (int outchr)
{
switch (outchr)
{
case '-': /* if it's a dash (phone no) */
return; /* ignore it */
case '|': /* if the CR character, */
outchr = CR; /* substitute a real CR here */
break;
case '.': /* Substitute ',' for '.' */
outchr = ','; /* for compatibility */
break;
case '~': /* if the "delay" character, */
empty_delay (); /* wait for buffer to clear, */
timer (10); /* then wait 1 second */
return; /* and return */
case '^': /* Raise DTR */
empty_delay (); /* wait for buffer to clear, */
RAISE_DTR (); /* Turn on DTR */
return; /* and return */
case 'v': /* Lower DTR */
empty_delay (); /* wait for buffer to clear, */
LOWER_DTR (); /* Turn off DTR */
return; /* and return */
case '`': /* Short delay */
timer (1); /* short pause, .1 second */
return; /* and return */
default:
break;
}
SENDBYTE ((unsigned char) outchr); /* then write the character */
if (outchr == CR) /* if it was a CR, */
{
empty_delay ();
timer (1); /* allow .1 sec line quiet */
}
else if (slowmodem)
{
timer (1); /* wait .1 sec for output */
}
}
void mdm_hangup ()
{
/*
* First, if a dial command is in progress, try to get the modem to abort
* it...
*/
CLEAR_OUTBOUND ();
CLEAR_INBOUND ();
if (un_attended && fullscreen)
{
do_ready (MSG_TXT(M_READY_HANGUP));
}
else
{
status_line (MSG_TXT(M_MODEM_HANGUP)); /* Tell what we are doing */
}
mdm_init (modem_init); /* re-initialize the modem */
timer (5); /* Wait another .5 sec */
ARQ_lock = 0; /* Re-init lockbaud */
set_xy ("");
CLEAR_INBOUND (); /* then flush input and exit */
}
void mdm_init (char *str)
{
set_prior(4); /* Always High */
CLEAR_OUTBOUND ();
CLEAR_INBOUND ();
if (init_setup != NULL)
{
(void) set_baud (max_baud.rate_value, 0);
mdm_cmd_string (init_setup, 1);
}
else
{
mdm_cmd_char (CR); /* output a CR, then */
LOWER_DTR (); /* Drop DTR to hangup */
timer (10); /* Hold it down for 1 sec */
RAISE_DTR (); /* Raise DTR, */
timer (5); /* Then hold it up for .5
* sec */
(void) set_baud (max_baud.rate_value, 0);
mdm_cmd_char (' '); /* output a space */
mdm_cmd_char (CR); /* then another CR */
}
mdm_cmd_string (str, 0); /* then the modem init
* string */
set_prior(2); /* Regular */
timer (5); /* Hold DTR for .5 sec more */
CLEAR_INBOUND (); /* then flush input and exit */
}
void send_break (int t)
{
long t1;
t1 = timerset ((unsigned int) t);
do_break (1);
while (!timeup (t1))
time_release ();
do_break (0);
}
void exit_DTR ()
{
if (!leave_dtr_high)
LOWER_DTR ();
}
/*
* We get here right after the CONNECT message. It could happen
* so quickly that we don't even have DCD set. (On a 33MHz 386
* and a T2500, that happens!)
*
* So: this routine waits up to 1 second for a carrier.
*
* It then eats anything that looks like an MNP string, with
* a total time allowed of 10 seconds (for streaming garbage)
* and maximum inter-character delay of 3 seconds.
*/
void MNP_Filter ()
{
long t, t1;
int c;
int logged = 0;
t = timerset (100); /* at most a one second delay */
while (!CARRIER && !timeup (t))
;
t1 = timerset (1000); /* 10 second drop dead timer */
t = timerset (300); /* at most a three second delay */
while (CARRIER && !timeup (t))
{
if (got_ESC ())
{ /* Manual abort? */
LOWER_DTR (); /* Yes, drop carrier */
return;
}
if (timeup (t1))
break;
if ((c = PEEKBYTE ()) != -1)
{
(void) TIMED_READ(0);
/* If we get an MNP or v.42 character, eat it and wait for clear line */
if ((c != 0) && ((strchr (BadChars, (c | 0x80)) != NULL) || (strchr (BadChars, (c & 0x7f)) != NULL)))
{
t = timerset (300);
if ((logged++) == 0)
status_line (MSG_TXT(M_FILTER));
}
}
}
}