16 Enter the name of the ISAM initialization file to use
17 Save Template As
18 Open Template
19 One or more files required by the VB Setup Wizard cannot be located.
20 of
21 This file is an invalid Setup Wizard template. Visual Basic 5.0 cannot load a Setup Wizard template created in a previous version of Visual Basic.
22 Can't start Visual Basic! The file was not rebuilt.
23 This file is not a Visual Basic 5.0 source file; it will not be processed.
24 This file is not a valid Visual Basic 5.0 Project File. Build and save the project in Visual Basic 5.0 and try running Setup Wizard again.
25 An error occurred while processing the project file.
26 Objects and References
27 Detected Project Files
28 VB Runtime Required Files
29 Cannot create the compression destination directory.
30 Do you want the Setup Wizard to delete all the existing files in the above directory before building the setup program?
31 File
32 Determining Files To Compress...
33 Compressing Files
34 to Directory Path
35 Determining Files To Copy...
36 Source File
37 Destination File
38 Copying Files...
39 Determining File Layout...
40 An error occurred while copying this file.
41 An error occurred while compressing.
42 Error reading source file.
43 Error writing compressed file.
44 Out of memory while writing compressed file.
45 Internal compression error.
46 You cannot use this directory as the destination directory. Please try again.
47 This is the same as the project directory.
48 This is the Windows System directory.
49 This is the Windows directory.
50 This is the root of the drive the Setup Wizard was run from.
51 This is the temporary directory used for compressing files.
52 The Setup Wizard does not support UNC Names. Please make a network connection to the share and try again.
53 An error occurred laying out this file. File layout aborted.
54 An error occurred while processing VB source file information.
55 An error occurred while processing this file.
56 The file listed in your project file could not be found.
57 Please insert the requested blank, formatted diskette in drive
58 An error occurred attempting to determine the amount of disk space free on drive
59 Please ensure that the disk in drive
60 is a blank,
61 formatted
62 with at least
63 bytes of disk space free.
64 Rebuilding Project's .exe, .dll, or .ocx
65 An error occurred trying to rebuild the project's .exe, .dll, or. ocx. Try rebuilding the project in VB5 and be sure to save the project's .vbp file after it is successfully rebuilt.
66 An error occurred trying to build the end user setup program.
67 Building Setup Program...
68 You have deselected one or more files which are required for every Visual Basic application. The destination computer must have these files in order for your application to run. Do you want to continue?
69 Error in Setup Wizard dependencies file! The file above is a required distribution file, but the destination directory specified for it includes a reference to
70 The Setup Wizard cannot be run via a UNC Pathname. Please make a connection to the share and try again.
71 Initializing
72 The drive type information in this initialization file/section has been corrupted
73 Migrating VB3 Setup Wizard Files
74 An error occurred writing to the file. The following information was not written:
75 Filename:
76 Section: [
77 ]
78 Data:
79 =
80 Too many files were selected at once. Please select fewer files and try again.
81 The file(s) you selected were already in the list. No new files have been added.
82 This filename: (
83 ) is already in the list and cannot be added. You can rename one of the files and try again.
84 ) has the same name of a file that the Setup Wizard will automatically include. The file will not be added to this list.
85 Add Files
86 Unexpected error adding file(s) to the distribution list
87 Either the project state or the template file has changed since this template file was saved. The Setup Wizard will restart.
88 An error occurred reading the template file; the Setup Wizard will restart.
89 Error accessing drive
90 An unexpected error has occurred.
91 Are you sure you want to exit?
92 The specified directory:
93 is invalid, incomplete, or write protected. Please type a full path with drive letter; for example 'C:\APPS'.
94 This directory doesn't exist. Do you want to create it?
95 An error occurred attempting to create the directory.
96 Drive
97 Proj/Tmplt (*.vbp;*.swt)|
98 All Files (*.*)|
99 Project Files (*.vbp)|
100 Template Files (*.swt)|
101 Executable Files (*.exe)|
102 Dynamic Link Libraries (*.dll)|
103 Visual Basic Controls (*.vbx)|
104 ActiveX Controls (*.ocx)|
105 Initialization Files (*.ini)|
106 Locate
107 This file may be required for your program to run correctly. Do you want to keep searching for it?
108 The new project file built by Setup Wizard has an older date/time (or the same date/time) as it had before being rebuilt. You should try rebuilding the file again.
109 An error occurred trying to enumerate the Windows registration database.
110 An error occurred trying to query the Windows registration database.
111 Error determining disk space free for drive
112 Locate VB Setup Toolkit Bootstrap file
113 Locate VB Executable file
114 Locate VB Setup Wizard Template Project file
115 - Step |1
116 The help file SETUPWIZ.HLP cannot be found - help is not available.
117 This file was not found and is required for correct operation of the Setup Wizard.
118 An error occurred writing to the template file; the file contents (if any) are invalid.
119 Locate VB Setup Toolkit app removal program
120 Working
122 ActiveX Components (*.dll;*.exe)|
123 Local ActiveX Components (*.dll;*.exe)|
124 Remote ActiveX Components (*.vbr)|
125 The file '|1' is not a valid remote ActiveX Component support file.
126 The ActiveX Component you selected does not contain sufficient information for it to be installed by the Setup Toolkit.
127 Installing this component may require you to make modifications to the Setup1 program to directly make the required registry entries.
128 Database Drivers
129 ActiveX Components
130 Are you sure you want to cancel compression and copying?
131 Please wait... Processing cancel request
132 Press ESC to cancel
133 The Enterprise Edition of Visual Basic is needed in order to add remote ActiveX Components.
134 Could not find typelib file '|1'. This file must be present if the remote ActiveX Component support file '|2' is to be distributed.
135 Either there are no installable ISAMs installed on this machine, or there was an error opening the Windows registrataion database. Database drivers will not be available for selection.
136 No protocols were found in |1
137 Error generating VB5dep.ini. The following line of '|1' contains an error:
138 An unexpected error occurred while generating VB5dep.ini. Perhaps this file is write protected.
139 A program group command line was specified for the file '|1' but not a program group icon caption. A program group icon caption is required.
140 The directory '|1' contains subdirectories. VB Setup Wizard will not delete directories that contain subdirectories. You must choose a different location or manually delete these subdirectories.
141 Could not delete '|1'. |2
142 Dependency Information
143 INF file for |1
144 |1 can be 10 for Windows directory, 11 for Windows\System(32) directory, or left blank for the Occache directory.
145 SMS Package Definition File
146 The Setup Wizard has found a license file for the component '|1'. Do you want this license information registered on the end user's machine?\n\nNote: If you want the license file installed as well as registered on the end user's machine, click Yes and then use the 'File Details' button in the File Summary step to set a destination directory for installation.
147 By default, the license information in '|1' will be registered on the end user's machine but the file itself will not be installed\n\nIf you want the license file installed as well as registered on the end user's machine, then use the 'File Details' button in this step to set a destination directory for installation.
148 If this control will be used within a design environment other than Visual Basic, you will need to distribute the Property Page DLL.\n\nDo you want to include this file in your setup?
149 Visual Basic 5.0 Setup Wizard
150 Setup Wizard
151 Please see Help for more information.
152 Required for ActiveX Designer
153 Required for Internet functionality
154 INF file for Remote Servers
200 File Details
205 Version Information
206 Company Name:
207 File Description:
208 File Version:
209 Legal Copyright:
210 Legal Trademarks:
211 Product Name:
212 Product Version:
213 OK
214 Installation Information
215 File Information:
216 Install as a &shared file
217 &Destination Directory
218 (Installation information not available until the '|1' step)
219 (Do Not Install This File)
220 &Register contained license information on the end user's machine.
300 File Summary
301 Number of program files:
302 Number of setup files:
303 Total number of files:
304 Uncompressed bytes of program files:
305 Uncompressed bytes of setup files:
306 Total uncompressed bytes of all files:
307 Setup Target:
308 OK
400 &Save Template...
402 &Finish
403 < &Back
404 &Next >
405 E&xit
406 &Help
407 File &Details...
408 The wizard has found the following additional file dependencies for the application.\n\nTo remove a file from the dependency list, uncheck it.\n\n
409 An error occurred trying to get the clsid for file '|1'. Error number = |2.
410 &Disk Drive
411 F&loppy Drive:
412 Disk &Size:
413 &Destination:
414 D&rive:
415 &Rebuild the Project
416 Select &VBP File
417 The project file '|1' referenced in your template cannot be found or is not valid.
418 The wizard uses your project file (.vbp) or a previously saved template file (.swt) to determine the list of files to distribute with your application.\n\nWhere is the project file or template for your application?
419 If your application connects to any of the following ISAM database formats, please check them.\n\nNOTE: If your application uses ODBC, you will need to distribute the ODBC setup disks separately.
420 Source File
421 Destination File
422 Copying Files
423 Uncompressed File
424 Compressing Files...
425 &Add...
426 &Summary Details...
427 Dependenc&y Of:
428 The wizard has determined that the following files should be shipped and/or registered with your application.\n\nTo include additional files, click the 'Add' button. If you do not want to distribute a file, uncheck it.
429 The Setup Wizard is finished collecting information!\n\nYou can save this information in a template if you wish. You can use this template the next time you run the wizard on this project!
430 To build your setup program or dependency file, press Finish.
431 Processing Project File
432 This project file was created on a different platform. VB5 uses a different DAO library for each platform.
433 The DAO library for this platform will be used instead.
435 The following lines may be deleted in order to obtain extra space for customizing this file on a full installation diskette.
436 The wizard has determined that your application uses the following ActiveX components.\n\nIf your application uses additional local components, include them by clicking on the 'Add Local' button.\n\n
437 The wizard has determined that your application does not use any ActiveX components.\n\nIf your application does use local ActiveX components, include them by clicking on the 'Add Local' button.\n\n
438 To include components accessed by Remote Automation or Distributed COM, click the 'Add Remote' button.
439 Add &Local...
440 Add Re&mote...
441 &Remote Details...
447 VB5 Remote/DCOM Client Support File
448 VB5 Remote Component Support File
449 Add ActiveX Components
452 In-process ActiveX DLLs should be installed as shared components to correctly update file removal information.
453 Installing these DLLs in an application directory will allow users to remove the component regardless of dependencies from other applications.
454 Proceed anyway?
455 Please consult the license agreement for each component to determine its distribution rights.
456 The Setup Wizard has found a reference to the file |1. Does this file refer to a remote automation component?
457 Please remember to manually add the remote automation component referred to by |1.
458 To do so, use the 'Add...' button in the '|1' Step to add the required .VBR file.
459 The Setup Wizard has found a reference to the file |1. However, no dependency information was available to locate the dependent automation component.
460 If this component needs to be distributed, it must be added manually via the 'Add...' button in the '|1' Step.
461 Creating VB5dep.ini Dependencies
462 F&loppy disk
463 &Disk Directories (\Disk1, \Disk2, etc.)
464 &Single Directory
465 SWSETUP
466 DISK
467 &Installable ISAMs:
468 What type of Workspaces are you using?
470 Create a &Setup Program
471 &Generate Dependency File
472 &Provide SMS Support
473 Generate &Dependency File Only
474 Create &Internet Download Setup
475 The version information for the file '|1' does not match the version information found in its dependency file. You should correct this situation before continuing. Click 'Yes' to continue anyway, click 'No' to return to the previous screen. Do you wish to continue?
476 What's New
477 Click here to see the latest information on Internet download from Microsoft!
478 There was a problem displaying the latest information on Internet download. Couldn't show '|1'.
479 The selected project is not valid for an Internet setup. You can use the Setup Wizard to create an Internet setup for an ActiveX Control, ActiveX EXE, or ActiveX DLL project.\n\nPlease select another project or change the Setup Option to continue.
480 There was a problem building the .cab file for your Internet download setup.
481 The Setup Wizard will create a setup program and/or a dependency file for your application.\n\nThe setup program is used to distribute your application and a dependency file contains a list of all the files your application needs to run.\n\nYou can press Back at any time to change your selections.\n\nPlease click Next to begin.
482 &Skip this screen in the future.
483 Options
484 Bro&wse...
485 The wizard could not find dependency information for the following files.\n\nIf you are certain that a file does not have any dependent files, check it and the wizard will never prompt you again for that file.\n\nNOTE: You can choose to ignore this for now by clicking Next, but your setup and application may not work correctly.
486 The dependency file for the following component(s) is out of date.\n\nYou should exit the wizard now and rebuild each of the dependency files for these components, using this wizard.\n\nNOTE: You can choose to ignore this for now by clicking Next, but your setup and application may not work correctly.
487 The wizard will package your components into a Cabinet (.cab) file which the Microsoft Internet Explorer can automatically download.\n\nSeparate runtime cabinets are linked to those on the Microsoft web site (specified by the .dep file), or to another location that you specify below.
488 Runtime Com&ponents
489 &Download from the Microsoft web site
490 &Use alternate location:
491 - URL, UNC, or blank for same location
492 &Safety
493 Click here to mark your components as safe for initialization and scripting...
495 How would you like to distribute your application?
496 For a floppy disk installation, the wizard will build all of the necessary disks for you.\n\nWhich drive would you like to use and what is the floppy disk size?
497 For a single directory installation, the wizard will place all of the necessary setup files into one directory, from which you can run setup.\n\nWhere would you like the wizard to put the files?
498 For a multiple directory installation, the wizard will create directories called 'Disk1', 'Disk2', etc. for each required floppy disk.\n\nYou can run setup from Disk1 or create floppy images from the individual directories.\n\nWhere would you like the wizard to create the directories and what size would you lke them to be?
499 For distribution via the Internet, the wizard first needs to know where to place the files for download.\n\nYou will specify additional Internet information in the next step.
500 Since this is an ActiveX EXE project, it can be installed stand-alone or as a shared component. How would you like to install this?
501 &Install as a stand-alone application
502 In&stall as a shared component
503 Will this shared component be installed on a remote server and accessed through Remote Automation? Choose No if it will be accessed through DCOM or if it will not be installed on a remote server.
504 &Yes
508 N&o
509 ; If you are going to compress this file into a Cabinet (.cab) file, you should add the name of that file here.
510 ; If you specified a CABFileName, then you can put URL location here, where Internet users can locate your Cabinet file for download.
511 ; If you specified a CABFileName, you should put the name of the inf file contained in that Cabinet file, here.
512 If any of the controls on this page require licensing, you must create a license package file.
513 Run LPK_TOOL.EXE in the tools directory to create the required LPK file.
514 Could not copy the file '|1' to the '|2' directory because the file could not be found. Setup Wizard will continue, but your Internet download package may not work properly.
515 An unknown error occurred while building the Cabinet file '|1'. Please verify that you have proper access to the destination and that there is sufficient space there to create the file.
516 The information found in the file '|1' does not match that found in the registry. Make sure the file is registered on this computer in the directory you are retrieving it from.\n\nYour project may not function properly if you continue. Do you wish to continue?
517 The information found in the file '|1' does not match that found in the registry. Make sure your project was compiled on this machine.\n\nYour project may not function properly if you continue. Do you wish to continue?
518 The Control Creation Edition of Setup Wizard only builds setups and downloads for VB created ActiveX Control projects. The project you have selected is not an ActiveX Control project.
550 The target directory you chose already contains files and/or other subdirectories. These must all be deleted in order to continue. Do you want to delete these files and subdirectories?
551 Subdirectories found in the directory you chose:
552 Delete Files and Subdirectories?
553 The destination directory already contains files and/or subdirectories. Setup Wizard will not delete them.\n\nDo you want to continue?
560 Confirm Missing Dependencies
561 The wizard will ignore dependencies for the unchecked files for this session.\n\nBy ignoring missing dependency information, setup and your application may not work correctly.\n\nDo you wish to continue?
562 Confirm Out Of Date Dependencies
563 The wizard will continue even though some dependency information is out of date, and may be inaccurate.\n\nIf you continue, setup and your application may not work correctly.\n\nDo you wish to continue?
570 Safety
571 To mark a component as safe, select it from the list on the left and check 'Safe for scripting' and/or 'Safe for initialization' on the right.\n\nRepeat this process for every component you wish to mark as safe.\n\nNOTE: Marking a component as safe is your guarantee to the end user that your control will not harm their system. You should only set these options if you are certain of their safety.
572 The selected component is:
573 &Components
574 &Safe for initialization
575 S&afe for scripting
600 Remote Connection Details
601 Components being accessed via Distributed COM or Remote Automation require additional setup information. Please select how this application will access the component and then fill in the appropriate fields below.
604 &Network Address (for example, Computer name):
605 Network &Protocol:
606 &Authentication Level:
609 0 - Default
610 1 - None
611 2 - Connect
612 3 - Call
613 4 - Packet
614 5 - Packet Integrity
615 6 - Packet Privacy
616 Remote Support File:
617 (End user must specify)
618 Remote Transport
619 Connection Information
620 &Remote Automation
621 &Distributed COM (DCOM)
700 No dependency information could be found for:
701 Do you want to include this file anyway? If so, setup and your application may not work correctly.
702 Never warn me about this file's dependency information again.
707 Unable to Locate Dependency Information
800 The Setup Wizard has finished creating your setup program and/or dependency file.
801 &Do not show this dialog in the future.
803 As a precaution, scan the distribution media for viruses.
